bimos Laboratory Stool, castors, synthetic leather Magic, colour ring blue, seat height 450 to 650 mm, 9463L-MG01-3277
€166.00
% Manufacturer's RRP: €185.00 10% below manufacturer's RRP
- Swivel stool with gas spring, seat height steplessly adjustable from 450 to 830 mm depending on the version
- Version with castors (up to 650 mm) or with glides and foot ring (up to 830 mm)
- Hygienic foot release in addition to the ring release on the version with castors and foot release
- Seat diameter 400 mm, upholstery thickness 60 mm, black in synthetic leather Magic or Skintec
- Colour ring under the seat in blue, grey, orange or green
- Polished aluminium star base, diameter 540 mm, Hygienic Design
- 3-year full warranty, then spare parts free of charge up to year 10 (wear parts excluded)
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "bimos Laboratory Stool, castors, synthetic leather Magic, colour ring blue, seat height 450 to 650 mm, 9463L-MG01-3277"
The bimos Laboratory Stool is a swivel stool for workstations where people often sit only briefly and cleaning is frequent, for example in the laboratory, in the clinic or in pharmaceutical production. The seat has a diameter of 400 mm and an upholstery thickness of 60 mm, and the aluminium star base measures only 540 mm. As a laboratory stool, it is available in three versions: with castors and ring release, with castors and an additional foot release, or with glides and a foot ring. The upholstery is black and made of synthetic leather Magic or Skintec. The colour ring under the seat is blue, grey, orange or green.
Choose the version by working height
The three versions differ in seat height, height adjustment and undercarriage. Seat, upholstery, colour ring and star base are the same on all of them.
| Version | Seat height | Height adjustment | Undercarriage |
|---|---|---|---|
| 9463L | 450 to 650 mm | Ring release | Castors |
| 9F63L | 480 to 650 mm | Foot release and ring release | Castors |
| 9461L | 560 to 830 mm | Ring release | Glides and foot ring |
The two castor models go up to a seat height of 650 mm. The 9461L with foot ring is intended for higher work surfaces and goes up to 830 mm.
Laboratory stool with foot release: the 9F63L
On the 9F63L, you set the seat height with your foot. The ring release under the upholstery is also fitted, and both adjust the gas spring steplessly. The manufacturer describes the foot release as particularly simple and hygienic. It helps when your hands are occupied or have been in contact with sample material and should not have to touch the frame as well. Compared with the 9463L, the lowest seat height is 480 mm instead of 450 mm; the highest is 650 mm on both.
Castors, glides and the 650 mm limit
The 9463L and the 9F63L have soft, load-dependent braked twin castors for hard floors such as concrete or tiles. The laboratory castors have a diameter of 65 mm and, according to the manufacturer, run smoothly and are easy to clean. According to bimos, standard castors are not permitted above a seat height of 650 mm for safety reasons. This is why the castor models end there.
The 9461L stands on large, abrasion-resistant plastic glides. In addition, it has a chrome-plated, height-adjustable foot ring with a wide tread surface. According to the manufacturer, glides are intended for workstations where the stool has to provide stability, for example for tasks requiring a lot of force. If you prefer to roll on the 9461L, fit seat-stop castors instead of the glides. They lock under load and roll when the load is removed, and bimos also permits them above 650 mm. According to the manufacturer, they correspond to DIN 68877 and can be retrofitted.
Seat, upholstery and colour ring
The seat surface is round, 400 mm in size and rounded at the front. Below it is the colour ring, which protects the upholstery and adds a colour accent. You can choose from blue, grey, orange and green.
The upholstery is black and 60 mm thick in both materials. Magic is a PVC-free synthetic leather which, according to the manufacturer, is particularly soft and washable, insensitive to oils and resistant to commercially available disinfectants. Extremely sharp-edged objects can damage it. According to the manufacturer, Skintec is robust, hard-wearing and easy to care for, and is likewise resistant to commercially available disinfectants. According to bimos, this resistance has been tested. If you mainly want a soft seat, choose Magic; if you need a robust upholstery, choose Skintec.
Hygienic Design and cleaning
The stool has a low-joint, form-fitting construction (Hygienic Design) and is designed to collect little dirt. The gas spring has a protective cover against dust and dirt. According to the manufacturer, it can be used in laboratories of safety level S1 to S3. Which cleaning and disinfecting agents are suitable in an individual case should be clarified before use.
Typical applications
- Laboratory workstations in chemistry, biotechnology and pharma where people often sit only briefly
- Laboratories at universities and higher education institutions
- Healthcare facilities and medical areas where surfaces are often wiped and disinfected
- Workstations with higher work surfaces that need the 9461L with foot ring
- Workstations where the height is to be adjusted without using your hands (9F63L with foot release)
Warranty
bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge; labour and call-out are then charged. Excluded are wear parts such as upholstery, cover materials, castors and surfaces of star bases. The warranty conditions apply to Germany. In the event of a warranty claim, please contact us. The bimos warranty terms (PDF, German) apply. Your statutory rights in respect of defects remain unaffected.
Frequently asked questions about the Laboratory Stool
What is the difference between the 9F63L and the 9463L?
The 9F63L additionally has a foot release, with which the seat height can be set without using your hands. Its lowest seat height is 480 mm, that of the 9463L is 450 mm. Both have castors and go up to 650 mm.
How high can the Laboratory Stool be adjusted?
That depends on the version: the 9463L goes from 450 to 650 mm, the 9F63L from 480 to 650 mm and the 9461L from 560 to 830 mm. All can be adjusted steplessly by gas spring.
Castors or glides?
Castors are for workstations where you need to stay mobile. Glides give the stool stability. The 9461L has glides and a foot ring. Seat-stop castors as a replacement for the glides are also available.
Is the upholstery resistant to disinfectants?
According to the manufacturer, synthetic leather Magic and Skintec are resistant to commercially available disinfectants. Please clarify with us before use which agents are suitable in an individual case.
Is the Laboratory Stool available as an ESD version?
The Laboratory Stool is not an ESD version. bimos has ESD stools in its range, which you can enquire about through our procurement service.
How long does the warranty last?
bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge; labour and call-out are charged. Wear parts are excluded.
Technical details
| Seat height | 9463L: 450 to 650 mm, 9F63L: 480 to 650 mm, 9461L: 560 to 830 mm |
| Height adjustment | Gas spring with protective cover, stepless, ring release under the upholstery, on the 9F63L additionally foot release |
| Seat | round, diameter 400 mm, upholstery thickness 60 mm, rounded front edge |
| Upholstery | black, synthetic leather Magic (PVC-free) or Skintec |
| Colour ring | Blue, grey, orange or green |
| Star base | Polished aluminium, diameter 540 mm |
| Undercarriage | 9463L and 9F63L: laboratory castors, diameter 65 mm, soft, load-dependent braked; 9461L: plastic glides and chrome-plated, height-adjustable foot ring |
| Laboratory suitability | Hygienic Design (low-joint, form-fitting), safety level S1 to S3 (manufacturer's information) |
| Standard | DIN 68877, GS mark (manufacturer's information) |
| Manufacturer's warranty | 3-year full warranty from delivery, then spare parts free of charge up to the 10th year, labour and call-out chargeable, wear parts excluded |
Scope of delivery
- bimos Laboratory Stool in the selected version, with black upholstery and colour ring
- Gas spring with protective cover and aluminium star base, polished
- 9463L and 9F63L: laboratory castors. 9461L: plastic glides and chrome-plated foot ring
- partly disassembled in a carton, assembly according to the assembly and operating instructions
Downloads
Assembly and operating instructions Laboratory Stool (PDF, German)- Brochure stool system (PDF, German)
Individual requirements and procurement service
For accessories such as the Flex support (armrest and back support), a foot ring for the 9463L or seat-stop castors, for larger quantities or special requests, our procurement service can help. You can also ask there about ESD stools from bimos.