Rapid tests & reagents
Rapid tests and analysis cases for water and soil
All rapid tests in this category come from Macherey-Nagel. The NANOCOLOR cuvette tests measure chloride, COD, total nitrogen, silicic acid, nitrate, sulphate, sulphide and surfactants photometrically, that is, in the laboratory with a suitable photometer. The VISOCOLOR analysis cases are intended for measurement on site: swimming pool, drinking water, fishing waters, soil and teaching in schools, optionally with colour comparison or with a photometer in the case. In addition there are a pH test paper and the refill pack for the Fish case. Further parameters, refill packs and photometers from the Macherey-Nagel range are available through the procurement service.
Macherey-Nagel NANOCOLOR COD 160 tube test, 985026
Chemical oxygen demand (COD) is one of the most important parameters for the assessment of industrial and municipal effluents. The NANOCOLOR COD 160 tube test from Macherey-Nagel delivers precise, time-saving results based on DIN ISO 15705 when used in conjunction with the appropriate NANOCOLOR photometers. Low measurement range for samples with low organic load The test covers a measurement range of 15–160 mg/L O₂ and is therefore suitable for samples with a lower organic load than the NANOCOLOR COD 4000 (Item No. 985011). The method is based on the potassium dichromate procedure and is based on DIN ISO 15705 H45, EPA 410.4, APHA 5220 D and DIN 38409 H41-1. Compatible with standard NANOCOLOR photometers The test can be analysed on the following instruments: 500 D, Advance, MT Easy UV, MT Easy VIS, PF-3 COD, PF-12Plus, UV/VIS II and VIS II, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already offered in our range. Scope of application The test is designed for wastewater, sewage sludge and water samples. A sturdy box containing 20 round cuvettes is sufficient for 20 determinations. When stored at 15–25 °C, the shelf life is 1 year from the date of manufacture. Technical details Parameters COD Method COD - Potassium dichromate Measuring range COD - 15–160 mg/L O₂ Note Measurement range on the NANOCOLOR VIS II Test range Low Test method Photometric Underlying standard Based on DIN ISO 15705 H45, analogous to EPA 410.4, APHA 5220 D, DIN 38409 H41-1 Test No. 0-26 Platform NANOCOLOR tube tests Compatible with 500 D, Advance, MT Easy UV, MT Easy VIS, PF-3 COD, PF-12Plus, UV/VIS II, VIS II Application Wastewater, sewage sludge, water Seawater analysis No Digestion kit No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 1 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 376 g Packaging dimensions 160 x 111 x 122 mm Hazardous substances Yes Trademarks NANOCOLOR
Macherey-Nagel VISOCOLOR Fish reagent case, 933101
The VISOCOLOR Fish analysis kit has been specially developed for the analysis of fishing waters. It combines reagents and accessories for the six most important water parameters in a single set: ammonium, nitrate, nitrite, phosphate, pH and total hardness. Six key parameters for water quality Anyone wishing to assess fishing waters can hardly avoid these six parameters: ammonium, nitrate and nitrite indicate nitrogen loading and thus, indirectly, the condition of the fish population; phosphate indicates nutrient inputs and algal growth; whilst pH and total hardness provide the basic data for almost any further hydrological assessment. With a single kit, the most important parameters for a fishing water assessment can be covered directly on site, without having to put together several individual tests. Use in fish farming, club waters and water monitoring Whether monitoring an aquaculture pond, carrying out a routine check by an angling or fishing club on its own waters, or taking a random sample as part of official water monitoring: the kit provides the key parameters needed to identify pollution issues at an early stage, before they endanger fish stocks. As all the tests can be carried out without an additional photometer, the kit can be used directly at the water body, without a power connection or sensitive additional equipment. Ready for immediate on-site use The kit includes a case, test kits, accessories and instructions. Results are interpreted purely visually by colour comparison. The reagents have a shelf life of 1.5 years from the date of manufacture and should be stored at 15–25 °C to ensure that results remain reliable throughout their entire service life. Technical details Hazardous substances Yes Gross weight (including packaging) 1381.5 g Shelf life (from date of manufacture) 1.5 years Storage temperature 15–25 °C Scope of delivery Case, test kits, accessories, instructions Parameters Ammonium, nitrate, nitrite, phosphate, pH, total hardness Photometer included No Packaging dimensions 325 x 238 x 155 mm Trademark VISOCOLOR
Macherey-Nagel VISOCOLOR Fish reagent case with PF-3 Fish, 934127
According to the manufacturer, the VISOCOLOR Fish reagent case with PF-3 Fish from Macherey-Nagel is developed for the advanced analysis of fishing waters. It contains the PF-3 Fish compact photometer, reagents and accessories for 14 water parameters. Test strips give quick results by dipping and reading, and the ECO reagents are intended for photometric determination.Tests includedThe 14 parameters are covered by four methods: test strips (chloride, total hardness, carbonate hardness, pH), titration (alkalinity), colour disc (phosphate) and photometric determination with the PF-3 Fish. Phosphate and pH are represented twice, phosphate visually and photometrically, pH as a test strip and photometrically.ParameterTest kit (REF)MethodMeasuring rangeTestsChlorideQUANTOFIX Chloride (91321)Test strips, visualLevels 0, 500, 1,000, 1,500, 2,000 and ≥ 3,000 mg/L Cl⁻100Total hardnessCarbonate hardnesspHQUANTOFIX Multi-stick for aquarium owners (91326)Test strips, visualTotal hardness: levels 0, 5, 10, 15, 20 and 25 °dCarbonate hardness: levels 0, 3, 6, 10, 15 and 20 °dpH: levels 6.4, 6.8, 7.2, 7.6, 8.0 and 8.4100AlkalinityVISOCOLOR HE Alkalinity AL 7 (915207)Titration with titration syringe0.2 to 7.2 mmol/L OH⁻200Phosphate (ortho)VISOCOLOR HE Phosphate (920182)Colour disc, visual0.05 to 1.0 mg/L PO₄-P300AmmoniumVISOCOLOR ECO Ammonium 3 (931208)Indophenol, photometric0.1 to 2.5 mg/L NH₄⁺50Chlorine (free and total)VISOCOLOR ECO Chlorine 6 (931217)DPD, photometric0.05 to 6.00 mg/L Cl₂200IronVISOCOLOR ECO Iron 2 (931226)Triazine, photometric0.04 to 2.00 mg/L Fe100Silicic acidVISOCOLOR ECO Silicic acid (931233)Silicomolybdenum blue, photometric0.2 to 3.0 mg/L SiO₂80CopperVISOCOLOR ECO Copper (931237)Cuprizone, photometric0.1 to 5.0 mg/L Cu²⁺100NitrateVISOCOLOR ECO Nitrate (931241)Azo dye, photometric4 to 60 mg/L NO₃⁻110NitriteVISOCOLOR ECO Nitrite (931244)Sulphanilic acid and 1-naphthylamine, photometric0.02 to 0.50 mg/L NO₂⁻120pHVISOCOLOR ECO pH (931270)Mixed indicator, photometricpH 6.1 to 8.4Not specifiedPhosphate (ortho)VISOCOLOR ECO Phosphate (931284)Phosphomolybdenum blue, photometric0.2 to 5.0 mg/L PO₄-P80OxygenVISOCOLOR ECO Oxygen (931288)Winkler, photometric1 to 8 mg/L O₂50PF-3 Fish compact photometerThe PF-3 Fish measures at three LED wavelengths (450, 530 and 660 nm) in round cuvettes with 16 mm outer diameter. The cuvette slot is open; according to the manual, the instrument is insensitive to extraneous light. It stores 50 measured values with date and time, transfers them via mini-USB and runs on three AA batteries or via USB. The housing is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour). The manufacturer recommends calibrating the instrument with the calibration cuvette at least once a year.According to the brochure, the oxygen test has a shelf life of 1 year, the silicic acid test and the photometric phosphate test 3 years.Typical applicationsAnalysis of fishing watersRegular monitoring of fishing waters to avoid deficiencies and fish kills, according to the manufacturerOwn determination of important water values by fish farmers and others who work with water analysisTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet.PhotometerPF-3 Fish, LED photometer with 3 interference filtersWavelengths450 nm, 530 nm, 660 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions400 × 302 × 190 mmGross weight (including packaging)3,450 gStorage temperature15 to 25 °CShelf life (from production)1 yearHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS08 (health hazard), GHS09 (environmental hazard)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage), H317 (May cause an allergic skin reaction), H334 (May cause allergy or asthma symptoms or breathing difficulties if inhaled)Precautionary statementsP260, P264, P272, P280, P284, P303+361+353, P305+351+338, P310, P333+313, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIScope of delivery1 case with PF-3 Fish compact photometer and certificateTest kits for 14 parameters (REF in the table)1 calibration cuvette and 4 reaction tubes (empty cuvettes, 16 mm)Syringes (2 × 5 mL, 1 × 1 mL), 2 yellow drip tips, titration syringe 0 to 7.2 mmol/LSample beaker (25 mL), oxygen sample bottle (30 mL), titration test tube with 5 mL marking, 2 measuring glasses with screw capSliding comparator and colour disc VISOCOLOR HE PhosphateMeasuring spoons (1 black, 2 orange), tweezers, timerPF-3 manual, PF-3 Fish test instructionsRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the VISOCOLOR ECO test kits are also available. The REF numbers are in the table. Enquiries about refill packs, accessories or larger quantities are handled by our procurement service.
Macherey-Nagel VISOCOLOR School reagent case, 933100
The VISOCOLOR SCHOOL analysis kit brings hands-on water analysis straight into the classroom: all the reagents included correspond to the GUV rule for handling hazardous substances in the classroom (GUV-SR 2004). Pupils can therefore carry out the experiments themselves without teachers having to intervene at every step. A safe introduction to water analysis for the classroom Whether in chemistry, biology or geography lessons: water analysis is an integral part of many curricula when it comes to topics such as water quality, nutrient inputs or ecosystems. The VISOCOLOR SCHOOL analysis kit makes such experiments suitable for everyday use, for example when analysing water samples from a nearby stream, pond or lake as part of a field trip, or directly in the classroom using samples brought in by the pupils. As the reagents conform to GUV-SR 2004, even younger pupils can carry out the tests and evaluate colour comparisons themselves under supervision. Ammonium and pH: two parameters of high educational value The kit covers the determination of ammonium (graduation 0 / 0.2 / 0.5 / 1 / 3 mg/L NH₄⁺) and pH (graduation 4.0 / 5.0 / 6.0 / 7.0 / 8.0 / 9.0). Both parameters are well suited to teaching pupils fundamental concepts: ammonium as a classic indicator of organic pollution and nutrient inputs into water bodies, and pH as a key parameter for virtually any chemical and biological analysis of water. The kit includes a case, test kits, accessories and instructions, ready to use for the next lesson. Ready for immediate use without a photometer Analysis is carried out purely visually by colour comparison, without the need for an additional photometer. This significantly lowers the barrier to entry for schools and other educational institutions with limited equipment and enables several groups to work simultaneously, each group with its own test kit, without a single measuring device becoming a bottleneck. Cost-effective refills Once the supplies have run out, there’s no need to buy a whole new kit: an affordable refill pack is available if required. Technical details Hazardous substances Yes Gross weight (including packaging) 1,453 g Shelf life (from date of manufacture) 1.5 years Storage temperature 15–25 °C Scope of delivery Case, test kits, accessories, instructions Parameters Ammonium, pH Photometer included No Packaging dimensions 325 x 238 x 155 mm Trademark VISOCOLOR
Macherey-Nagel NANOCOLOR Sulphide 3 tube test, 985073
Reliably and rapidly determining sulphide levels in water and effluent samples is a recurring issue in effluent analysis, particularly in relation to anaerobic processes and odour problems. The NANOCOLOR Sulphide 3 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers.Precise method for low concentrationsThe test is based on the methylene blue method and covers a measurement range of 0.05–3.00 mg/L S²⁻, suitable for very low sulphide concentrations. The method is based on DIN 38405 D26 and D27 and is suitable for both fresh water and seawater samples.Compatible with standard NANOCOLOR photometersThe test can be analysed on the following instruments: 500 D, Advance, MT Easy UV, MT Easy VIS, PF-12Plus, UV/VIS II and VIS II, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already offered in our range.Practical for everyday laboratory useA sturdy box containing 20 round cuvettes is sufficient for 20 determinations. When stored at 15–25 °C, the shelf life from the date of manufacture is 3 years. No additional digestion kit or sewage sludge digestion kit is required for this test.Technical details Parameter Sulphide Method Sulphide - Methylene blue Measuring range Sulphide - 0.05–3.00 mg/L S²⁻ Note Measurement range on the NANOCOLOR VIS II Test range Very low Test method Photometric Underlying standard Analogous to DIN 38405 D26, DIN 38405 D27 Test No. 0-73 Platform NANOCOLOR tube tests Can be analysed with 500 D, Advance, MT Easy UV, MT Easy VIS, PF-12Plus, UV/VIS II, VIS II Application Wastewater, water Seawater analysis Yes Digestion kit No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 3 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 344 g Packaging dimensions 160 x 110 x 119 mm Hazardous substances Yes Trademarks NANOCOLOR
Macherey-Nagel VISOCOLOR soil reagent case with PF-3 Soil and accessories, 934220
The Macherey-Nagel VISOCOLOR soil reagent case with PF-3 Soil and accessories contains the PF-3 Soil compact photometer, reagents for ammonium, potassium, nitrate, nitrite, phosphate and pH, and the equipment for sample preparation. According to the manufacturer, it is developed for soil analysis both in the laboratory and in the field. According to the manual, the methods provide sufficient accuracy for a quick assessment of nutrient conditions in the soil.Tests includedAmmonium, potassium, nitrate and phosphate are measured photometrically with the PF-3 Soil. pH and nitrite are read visually using test strips, and nitrate is also available as a strip test.ParameterTest kit (REF)MethodMeasuring rangeTestspHpH-Fix 2.0 to 9.0 (92118)Test strips, visualpH 2.0 to 9.0 in steps of 0.5100Nitrate and nitriteQUANTOFIX Nitrate/Nitrite (91313)Test strips, visualNitrate: levels 0, 10, 25, 50, 100, 250 and 500 mg/L NO₃⁻Nitrite: levels 0, 1, 5, 10, 20, 40 and 80 mg/L NO₂⁻100AmmoniumVISOCOLOR ECO Ammonium 3 (931208)Indophenol, photometric0.1 to 2.5 mg/L NH₄⁺50PotassiumVISOCOLOR ECO Potassium (931232)Potassium tetraphenylborate, turbidity, photometric2 to 25 mg/L K⁺60NitrateVISOCOLOR ECO Nitrate (931241)Azo dye, photometric4 to 60 mg/L NO₃⁻110Phosphate (ortho)VISOCOLOR ECO Phosphate (931284)Phosphomolybdenum blue, photometric0.2 to 5.0 mg/L PO₄-P80The measuring ranges are given in mg/L. The PF-3 Soil takes the dilution into account and displays results in mg/kg soil, but according to the manual only if the sample has been prepared as described in the manual.Sample preparation in the caseTwo solutions are included for extraction, a calcium chloride solution (extract A) and a CAL solution of calcium acetate lactate (extract B), each as a working solution and as a stock solution. In addition there are a balance, soil sieve, shaking bottles, measuring cylinder, funnel, MN 616 ¼ folded filter papers and syringes. The manual also describes soil moisture, soil density, sieving to 2 mm and sedimentation analysis to determine soil type. Sedimentation tube, glass stamper and pyrophosphate solution are in the case.PF-3 Soil compact photometerThe PF-3 Soil measures at three LED wavelengths (365, 450 and 660 nm) in round cuvettes with 16 mm outer diameter. The cuvette slot is open; according to the manual, the instrument is insensitive to extraneous light. It stores 50 measured values with date and time and transfers them via mini-USB; the free NANOCOLOR data export software exports the data and allows up to 10 custom methods to be created. The housing is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour).934220 or 934210The VISOCOLOR soil reagent case with PF-3 Soil (934210) contains the photometer and the four photometric test kits, but no sample preparation, no pH test, no nitrite test and no workbook. Its gross weight is 2,250 g, that of this case 8,900 g. Anyone who has to prepare soil samples themselves chooses the case with accessories.Typical applicationsSoil analysis in the field and in the laboratoryAssessment of nutrient conditions in the soilSoil monitoring for measures such as fertilisation or limingTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet.PhotometerPF-3 Soil, LED photometer with 3 interference filtersWavelengths365 nm, 450 nm, 660 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions525 × 455 × 200 mmGross weight (including packaging)8,900 gStorage temperature15 to 25 °CShelf life (from production)1.5 yearsHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS09 (hazardous to the environment)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIAccording to the brochure, the potassium and phosphate test kits have a shelf life of 3 years, ammonium and nitrate 1.5 years.Scope of delivery1 case with PF-3 Soil compact photometer and batteriespH-Fix 2.0 to 9.0 and QUANTOFIX Nitrate/NitriteVISOCOLOR ECO test kits for ammonium, potassium, nitrate and phosphateCalcium chloride solution and CAL solution (working and stock solutions), pyrophosphate solutionBalance, soil sieve, MN 616 ¼ folded filter papers, metal double spatula, plastic scoops, measuring spoon for potassium determinationWide-neck jar, shaking bottles, beakers, measuring cylinders, funnels, wash bottle for distilled waterSyringes (1 mL, 5 mL and 10 mL) with tubing, sedimentation tube, glass stamper, reaction tubes (16 mm)Workbook in four languages, PF-3 manual, VISOCOLOR manual, certificateRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the test kits and extraction solutions are also available, as are NANOCOLOR tube tests that the PF-3 Soil evaluates, for example NANOCOLOR Nitrate 50. Enquiries about accessories or larger quantities are handled by our procurement service.
Macherey-Nagel reagent case with PF-3 Pool, solid chlorine, 934119
The reagent case with PF-3 Pool and solid chlorine reagent from Macherey-Nagel contains the PF-3 Pool compact photometer and four VISOCOLOR ECO test kits for the classic swimming pool parameters chlorine (free and total), pH, cyanuric acid and alkalinity. According to the manufacturer, it is intended for the analysis of swimming pool samples, has room for further test kits and can be equipped individually.Tests includedParameterTest kit (REF)MethodMeasuring rangeTestsAlkalinityVISOCOLOR ECO Alkalinity TA (931204)Bromophenol blue, photometric0.3 to 14.0 °d (5 to 250 mg/L CaCO₃)100Chlorine (free and total)VISOCOLOR ECO Chlorine 6 (931217)DPD, photometric0.05 to 6.00 mg/L Cl₂200Cyanuric acidVISOCOLOR ECO Cyanuric acid (931223)Triazine, turbidity, photometric10 to 100 mg/L100pHVISOCOLOR ECO pH (931270)Mixed indicator, photometricpH 6.1 to 8.4150PF-3 Pool compact photometerThe PF-3 Pool measures at three LED wavelengths (450, 530 and 590 nm) in round cuvettes with 16 mm outer diameter. The cuvette slot is open; according to the manual, the instrument is insensitive to extraneous light. It stores 50 measured values with date and time and transfers them via mini-USB; the free NANOCOLOR data export software exports the data. The housing is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour). The manufacturer recommends calibrating the instrument with the calibration cuvette at least once a year.According to the flyer, the PF-3 Pool also evaluates further VISOCOLOR ECO tests, for example for bromine, chlorine dioxide, fluoride and iron. They are not part of the case but are also available.Solid or liquid chlorineBoth pool cases differ only in the chlorine test. This case contains Chlorine 6: measuring range 0.05 to 6.00 mg/L Cl₂, 200 tests, test kit shelf life 2 years, a solid powder as the first reagent. The reagent case with PF-3 Pool and liquid chlorine reagent (934118) contains Chlorine 2: measuring range 0.05 to 2.00 mg/L Cl₂, 150 tests, test kit shelf life 1.5 years, liquid reagents that are dosed in drops. Alkalinity, cyanuric acid and pH are the same in both cases. The manufacturer gives the shelf life of the case as 1 year for both versions; according to the brochure, the TA alkalinity test also has a shelf life of 1 year. Anyone who has to measure chlorine values above 2 mg/L chooses the case with Chlorine 6.Typical applicationsWater analysis for swimming pools and their operatorsOn-site monitoring of chlorine and pHDetermination of cyanuric acid and alkalinity (total alkalinity)Use in the laboratory and at all sampling pointsTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet. The H351 labelling is due to the cyanuric acid reagent Cya-1. The manufacturer’s safety data sheet should be read before use.PhotometerPF-3 Pool, LED photometer with 3 interference filtersWavelengths450 nm, 530 nm, 590 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions360 × 300 × 175 mmGross weight (including packaging)2,150 gStorage temperature15 to 25 °CShelf life (from production)1 yearHazardous substancesYesGHS pictogramsGHS08 (health hazard)Signal wordWarningHazard statementsH351 (Suspected of causing cancer)Precautionary statementsP201, P202, P280, P308+313, P405, P501TransportNot dangerous goods under the transport regulations (according to the safety data sheet)Scope of delivery1 case with foam insert and PF-3 Pool compact photometerVISOCOLOR ECO test kits for alkalinity, chlorine, cyanuric acid and pH (REF in the table)1 calibration cuvette and 4 empty cuvettes1 beaker and 1 syringe (5 mL)3 batteries (AA)PF-3 manual, booklet with the VISOCOLOR ECO test instructions, certificateRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the test kits are also available. Enquiries about accessories, equipping with further tests or larger quantities are handled by our procurement service.
Macherey-Nagel VISOCOLOR soil reagent case with accessories, 931601
Complete equipment for soil analysis on site and in the laboratory The Macherey-Nagel VISOCOLOR soil case combines test strips, test kits and accessories for the reliable analysis of soil samples in a robust, portable case. It contains all the components required for the preparation of extracts from soil samples, suitable for use directly on site as well as in the laboratory. Two parameters, multiple concentration levels Included are pH-Fix 2.0–9.0 (100 tests, graduation in 0.5 steps from pH 2.0 to 9.0) and QUANTOFIX Ammonium (100 tests, graduation 0/10/25/50/100/200/400 mg/L NH₄⁺) for determining ammonium in soil extracts. A VISOCOLOR ECO pH-4.0–9.0 refill pack containing 450 tests is also included, so that sufficient test capacity is available even with intensive use. Robust equipment for field use Accessories include, amongst other things, shaking flasks, wide-necked flasks, measuring cylinders, beakers, a soil sieve (2 mm mesh size) and a digital pocket balance. Chemical solutions (CaCl₂, CAL, pyrophosphate) and folded filter papers (MN 616) for extract preparation are also included. Technical details ParameterspH (2× included), ammonium Test scopepH-Fix: 100 tests, QUANTOFIX Ammonium: 100 tests, VISOCOLOR ECO pH refill pack: 450 tests Packaging dimensions535 × 461 × 208 mm Weight (gross, including packaging)8,500 g Storage temperature15–25 °C Shelf life2 years from the date of manufacture Scope of delivery 1x VISOCOLOR soil case Test kits: pH-Fix, QUANTOFIX Ammonium, VISOCOLOR ECO pH refill pack Accessories: shaking flasks, wide-necked flasks, measuring cylinders, beakers, soil sieve, digital pocket scales Chemical solutions: CaCl₂, CAL, pyrophosphate Folded filter papers MN 616 Instructions A photometer is not included. Individual requirements & procurement service Do you need refill packs for individual parameters or a photometer to complement your soil analysis? Our procurement service will be happy to assist you in making a suitable selection.
Macherey-Nagel VISOCOLOR Fish reagent case refill pack, 933201
Refill pack 933201 contains the reagents for the VISOCOLOR Fish reagent case 933101 and a spoon. It covers the six parameters of the case: ammonium, total hardness, nitrate, nitrite, phosphate and pH. If the reagent supply has been used up or has expired, the refill pack is used to replenish it and the case stays in use.What the refill pack contains and what it does notAccording to Macherey-Nagel, all reagents required for the six parameters and a spoon are included. According to the test procedures in the instructions, these are dropper bottles and several powder reagents that are dosed with the spoon.The case includes parts that are not in the refill pack: colour chart, measuring glasses with screw caps, sliding comparator, titration test tube, sample beaker, syringe and manual. Macherey-Nagel lists them as spare parts that can be ordered individually. The refill pack therefore requires a complete case, namely the VISOCOLOR Fish reagent case 933101.Tests includedAccording to the instructions, all six parameters are evaluated visually, five by colour comparison and total hardness by counting drops. The methods are also suitable for seawater. For this, ammonium is diluted 1+9 and total hardness 1+29. For the nitrate test, the sample should be at 18 to 30 °C. In the nitrite test, chlorine interferes even at the lowest concentrations.ParameterMethodEvaluationMeasuring range or levelsAmmoniumIndophenol blueColour comparison0.2 to 3 mg/L NH₄⁺; levels 0; 0.2; 0.5; 1; 3Total hardnessComplexometry with dropper bottlesDrop counting1 drop corresponds to 1 °d (17.8 mg/L CaCO₃)NitrateReduction, diazotisation, azo dyeColour comparison1 to 90 mg/L NO₃⁻; levels 0; 1; 5; 10; 20; 50; 90NitriteDiazotisation, azo dyeColour comparison0.02 to 0.5 mg/L NO₂⁻; levels 0; 0.02; 0.05; 0.1; 0.2; 0.5PhosphatePhosphomolybdenum blueColour comparison0.6 to 15 mg/L PO₄³⁻pHMixed indicatorColour comparisonpH 4.0 to 9.0; levels 4.0; 5.0; 6.0; 7.0; 8.0; 9.0Typical applicationsAnalysis of fishing waters directly at the sampling point, because the water sample does not keep for longDetermining a suitable time to stock newly set up aquariumsRapid analysis in the event of a sudden fish killPlanning of additives such as phosphate fertiliser or lime by experienced water wardensThe instructions describe every step, so that even users with no prior chemical knowledge can carry out the tests.Technical detailsSuitable forVISOCOLOR Fish reagent case 933101ParametersAmmonium, total hardness, nitrate, nitrite, phosphate, pHEvaluationvisual (colour comparison, drop counting)Shelf life (from production)1.5 yearsStorage temperature15 to 25 °CGross weight (including packaging)455 gPackaging dimensions195 x 170 x 50 mmHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS09 (hazardous to the environment)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIThe labelling corresponds to Section 2.2 of the safety data sheet and applies to the product as a whole. The individual reagents are classified separately in the manufacturer’s safety data sheet.Scope of deliveryReagents for ammonium, total hardness, nitrate, nitrite, phosphate and pHSpoonIndividual requirements and procurement serviceThe colour chart, measuring glasses, sliding comparator and further spare parts for the case are also available. Enquiries about these and about larger quantities are handled by our procurement service.
Macherey-Nagel NANOCOLOR Silicic acid rectangular cuvette test, 91848
Reliably determining silicic acid in water and wastewater samples is particularly important in the monitoring of boiler feedwater and cooling water, as silicate deposits can cause damage to plant. The NANOCOLOR Silicic Acid standard test from Macherey-Nagel provides highly sensitive photometric measurements at low cost per sample, pre-programmed for use with the appropriate NANOCOLOR photometers. Two measurement ranges for different concentrations The test covers a standard measurement range of 0.01–5.00 mg/L Si (or 0.02–10.0 mg/L SiO₂) and a high-sensitivity measurement range of 0.002–0.100 mg/L Si (or 0.005–0.200 mg/L SiO₂). The method is based on the silicomolybdenum blue method and is based on APHA 4500-SiO₂ E and DIN EN ISO 16264 H57. Compatible with standard NANOCOLOR photometers The test can be analysed on the 500 D, Advance, UV/VIS II and VIS II instruments, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already offered in our range. Practical for everyday laboratory use One sturdy box of reagents is sufficient for 250 determinations. When stored at 15–25 °C, the shelf life from the date of manufacture is 3 years. The test is also suitable for seawater analysis; no additional digestion kit or sewage sludge digestion kit is required. Technical details Parameter Silicic acid Method Silicic acid - silicomolybdenum blue Measuring range Silicic acid - 0.01–5.00 mg/L Si, Silicic acid - 0.02–10.0 mg/L SiO₂ Sensitive measuring range Silicic acid - 0.002–0.100 mg/L Si, Silicic acid - 0.005–0.200 mg/L SiO₂ Note Measuring range on the NANOCOLOR VIS II Test range Low Test method Photometric Underlying standard Analogous to APHA 4500-SiO2 E, DIN EN ISO 16264 H57 Test No. 1-48 Platform NANOCOLOR standard tests Can be analysed using 500 D, Advance, UV/VIS II, VIS II Application Wastewater, water Seawater analysis Yes Digestion kit No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 250 test(s) Scope of delivery Sturdy box containing reagents for 250 determinations. Shelf life (from date of manufacture) 3 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 436 g Packaging dimensions 160 x 110 x 130 mm Hazardous substances Yes Trademarks NANOCOLOR
Macherey-Nagel NANOCOLOR COD 4000 tube test, 985011
Chemical oxygen demand (COD) is one of the most important parameters for the assessment of industrial and municipal effluents. The NANOCOLOR COD 4000 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers. Wide measuring range for highly contaminated samples The test covers a measurement range of 400–4,000 mg/L O₂ and is therefore particularly suitable for samples with a high organic load. The method is based on the potassium dichromate procedure and is based on DIN ISO 15705 H45, EPA 410.4, APHA 5220 D and DIN 38409 H41-1. Compatible with standard NANOCOLOR photometers The test can be analysed on the 500 D, Advance, PF-3 COD, PF-12Plus, UV/VIS II and VIS II instruments, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already offered in our range. Scope of application The test is designed for wastewater, sewage sludge and water samples. A sturdy box containing 20 round cuvettes is sufficient for 20 determinations. When stored at 15–25 °C, the shelf life from the date of manufacture is 1 year. Technical details Parameters COD Method COD - Potassium dichromate Measuring range COD - 400–4,000 mg/L O₂ Note Measurement range on the NANOCOLOR VIS II Test range Medium Test method Photometric Underlying standard Analogous to DIN ISO 15705 H45, EPA 410.4, APHA 5220 D, DIN 38409 H41-1 Test No. 0-11 Platform NANOCOLOR tube tests Compatible with 500 D, Advance, PF-3 COD, PF-12Plus, UV/VIS II, VIS II Application Wastewater, sewage sludge, water Seawater analysis No Digestion kit No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 1 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 479 g Packaging dimensions 160 x 110 x 119 mm Hazardous substances Yes Trademarks NANOCOLOR
Macherey-Nagel NANOCOLOR Chloride 200 tube test, 985019
Chloride is one of the standard parameters in water analysis, whether for monitoring drinking water, groundwater or surface water. The NANOCOLOR Chloride 200 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers. Two measurement ranges for different concentrations The test covers a measurement range of 5–200 mg/L Cl⁻ and a second range of 0.10–1.00 g/L Cl⁻. The method is based on the mercury(II) thiocyanate/iron(III) nitrate procedure and is based on EPA 325.1 and APHA 4500-Cl⁻ E. Compatible with standard NANOCOLOR photometers The test can be analysed on the 500 D, Advance, PF-12Plus, UV/VIS II and VIS II instruments, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already offered in our range. Scope of application The test is designed for groundwater, surface water and drinking water, and is also suitable for seawater analysis. A sturdy box containing 20 round cuvettes is sufficient for 20 determinations. When stored at 15–25 °C, the shelf life is 1 year from the date of manufacture. Technical details Parameter Chloride Method Chloride - mercury(II) thiocyanate/iron(III) nitrate Measuring range Chloride - 0.10–1.00 g/L Cl⁻, Chloride - 5–200 mg/L Cl⁻ Note Measuring range on the NANOCOLOR VIS II Test range Medium Test method Photometric Underlying standard Analogous to EPA 325.1, APHA 4500-Cl⁻ E Test No. 0-19 Platform NANOCOLOR tube tests Can be analysed using 500 D, Advance, PF-12Plus, UV/VIS II, VIS II Application Groundwater, surface water, drinking water Seawater analysis Yes Digestion kit No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 1 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 455 g Packaging dimensions 160 x 110 x 119 mm Hazardous substances Yes Trademarks NANOCOLOR
Macherey-Nagel NANOCOLOR Sulphate LR 200 tube test, 985062
Alongside sulphide and sulphite, sulphate is one of the most prominent sulphur compounds in water analysis and is ubiquitous in nature. The NANOCOLOR Sulphate LR 200 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers. Precise method for low concentrations The test covers a measurement range of 20–200 mg/L SO₄²⁻ and is based on the barium sulphate turbidity method. The method is based on APHA 4500-SO₄²⁻ E. Compatible with standard NANOCOLOR photometers The test can be analysed on the following instruments: 500 D, Advance, MT Easy UV, MT Easy VIS, PF-12Plus, UV/VIS II and VIS II, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already featured in our range. Scope of application The test is designed for groundwater, surface water and drinking water. A sturdy box containing 20 round cuvettes is sufficient for 20 determinations. When stored at 15–25 °C, the shelf life is 3 years from the date of manufacture. Technical details Parameter Sulphate Method Sulphate - barium sulphate (turbidity) Measuring range Sulphate - 20–200 mg/L SO₄²⁻ Note Measurement range on the NANOCOLOR VIS II Test range Very low Test method Photometric Underlying standard Analogous to APHA 4500-SO42− E Test No. 0-62 Platform NANOCOLOR tube tests Compatible with 500 D, Advance, MT Easy UV, MT Easy VIS, PF-12Plus, UV/VIS II, VIS II Application Groundwater, surface water, drinking water Seawater analysis No Digestion set No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 3 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 345 g Packaging dimensions 160 x 110 x 119 mm Hazardous substances Yes GHS pictograms GHS07 (harmful), GHS08 (hazardous to health) Signal word Warning H-statements H302, H332, H373, H412 Trademark NANOCOLOR
Macherey-Nagel NANOCOLOR Non-ionic surfactants 15 tube test, 985047
Non-ionic surfactants (detergents) enter wastewater and water bodies via cleaning products and laundry detergents. Their monitoring is a standard parameter in water analysis. The NANOCOLOR Non-ionic Surfactants 15 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers. Precise method for low concentrations The test covers a measurement range of 0.3–15.0 mg/L of Triton® X-100 and operates according to the TBPE method. Compatible with standard NANOCOLOR photometers The test can be analysed on the 500 D, Advance, PF-12Plus, UV/VIS II and VIS II instruments, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers. Scope of application The test is highly versatile: it can be used for wastewater, groundwater, surface water, production water, process water and drinking water. A sturdy box containing 20 round cuvettes is sufficient for 20 analyses. When stored at 15–25 °C, the shelf life from the date of manufacture is 2 years. Technical details Parameter Non-ionic surfactants Method Detergents - TBPE Measuring range Non-ionic surfactants - 0.3–15.0 mg/L Triton® X-100 Note Measurement range on the NANOCOLOR VIS II Test range Medium Test method Photometric Test No. 0-47 Platform NANOCOLOR tube tests Can be analysed with 500 D, Advance, PF-12Plus, UV/VIS II, VIS II Application Wastewater, groundwater, surface water, production water, process water, drinking water Seawater analysis No Digestion set No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 2 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 453 g Packaging dimensions 160 x 110 x 119 mm Hazardous substances Yes GHS pictograms GHS02 (flammable), GHS07 (harmful), GHS08 (hazardous to health) Signal word Warning H-statements H226, H302, H315, H319, H336, H351, H371 P-statements P201, P202, P280, P308+P313, P405, P501 Trademarks NANOCOLOR
Macherey-Nagel NANOCOLOR Nitrate 50 tube test, 985064
Nitrate is one of the most important nutrient parameters in water analysis, from drinking water monitoring to the assessment of water pollution. The NANOCOLOR Nitrate 50 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers. Two measurement ranges for different concentrations The test covers a measurement range of 0.3–22.0 mg/L NO₃-N and a second range of 2–100 mg/L NO₃⁻. The method works according to the 2,6-dimethylphenol procedure and is in accordance with ISO 23696-1 (2023-02) and based on ISO 7890-1 and DIN 38405 D9. Compatible with standard NANOCOLOR photometers The test can be analysed on the following instruments: 500 D, Advance, MT Easy UV, MT Easy VIS, PF-3 Soil, PF-12Plus, UV/VIS II and VIS II, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers already featured in our range. Scope of application The test is designed for use with wastewater, groundwater, surface water and drinking water. A sturdy box containing 20 round cuvettes is sufficient for 20 analyses. When stored at 15–25 °C, the shelf life is 2 years from the date of manufacture. Technical details Parameter Nitrate Method Nitrate - 2,6-dimethylphenol Measuring range Nitrate - 0.3–22.0 mg/L NO₃-N, Nitrate - 2–100 mg/L NO₃⁻ Note Measurement range on the NANOCOLOR VIS II Test range Low Test method Photometric Underlying standard In accordance with ISO 23696-1 2023-02, analogous to ISO 7890-1, DIN 38405 D9 Test No. 0-64 Platform NANOCOLOR tube tests Compatible with 500 D, Advance, MT Easy UV, MT Easy VIS, PF-3 Soil, PF-12Plus, UV/VIS II, VIS II Application Wastewater, groundwater, surface water, drinking water Seawater analysis No Digestion set No Sewage sludge digestion No NanOx Metal No NanOx N No Packaging unit 20 test(s) Scope of delivery Sturdy box containing 20 round cuvettes. Sufficient for 20 determinations. Shelf life (from date of manufacture) 2 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 461 g Packaging dimensions 160 x 110 x 119 mm Hazardous substances Yes GHS pictograms GHS02 (flammable), GHS05 (corrosive), GHS07 (harmful) Signal word Danger H-statements H226, H290, H302, H314, H336 P-statements P260, P264, P280, P303+P361+P353, P305+P351+P338, P310, P405, P501 Trademarks NANOCOLOR
Macherey-Nagel NANOCOLOR Total nitrogen TNb 220 tube test, 985088
Total nitrogen (TNb) is a key aggregate parameter in wastewater and water body monitoring, as it measures both organically bound and inorganic nitrogen. The NANOCOLOR Total Nitrogen TNb 220 tube test from Macherey-Nagel delivers precise, time-saving results when used in conjunction with the appropriate NANOCOLOR photometers. Two-step procedure: digestion and determination The test covers a measurement range of 5–220 mg/L N and operates in two steps: digestion using the NanOx-N reagent, followed by photometric determination according to the 2,6-dimethylphenol method. The method is in accordance with ISO 23697-1 (2023-02); the digestion is based on DIN EN ISO 11905-1 H36, and the determination on ISO 7890-1 and DIN 38405 D9. Compatible with standard NANOCOLOR photometers The test can be analysed on the following instruments: 500 D, Advance, MT Easy UV, MT Easy VIS, PF-12Plus, UV/VIS II and VIS II, including the NANOCOLOR VIS II (item no. 919650.1) and NANOCOLOR Advance (item no. 919750) spectrophotometers. Scope of application and scope of delivery The test is designed for use with wastewater, groundwater, surface water and drinking water. 2 sturdy boxes are supplied (Box A and B in a cardboard slipcase), each containing 20 round cuvettes for digestion and determination, sufficient for 20 determinations. When stored at 15–25 °C, the shelf life from the date of manufacture is 1 year. Technical details Parameter Total nitrogen Method Total nitrogen - 2,6-dimethylphenol Measuring range Total nitrogen - 5–220 mg/L N Note Measurement range on the NANOCOLOR VIS II Test range Medium Test method Photometric Underlying standard In accordance with ISO 23697-1 2023-02, digestion - analogous to DIN EN ISO 11905-1 H36. Determination - analogous to ISO 7890-1, DIN 38405 D9 Test No. 0-88 Platform NANOCOLOR tube tests Compatible with 500 D, Advance, MT Easy UV, MT Easy VIS, PF-12Plus, UV/VIS II, VIS II Application Wastewater, groundwater, surface water, drinking water Seawater analysis No Digestion set No Sewage sludge digestion No NanOx Metal No NanOx N Yes Packaging unit 20 test(s) Scope of delivery 2 sturdy boxes containing 20 round cuvettes for digestion and 20 round cuvettes for determination. Sufficient for 20 determinations. Shelf life (from date of manufacture) 1 year(s) Storage temperature 15–25 °C Gross weight (including packaging) 932.5 g Packaging dimensions 160 x 110 x 240 mm Hazardous substances Yes GHS pictograms GHS02 (flammable), GHS03 (oxidising), GHS05 (corrosive), GHS07 (harmful), GHS08 (hazardous to health) Signal word Danger H-statements H226, H272, H290, H302, H314, H315, H317, H334, H335, H336 P-statements P260, P264, P280, P284, P303+P361+P353, P305+P351+P338, P310, P333+P313, P405, P501 Trademarks NANOCOLOR
Macherey-Nagel DUOTEST pH test paper, pH 1–12, 90301
For rapid visual pH determination without the need for a measuring instrument, Macherey-Nagel offers the DUOTEST pH test paper, a simple and reliable solution for the pH range 1–12. Two indicator zones for more accurate readings DUOTEST indicator papers feature two different indicator zones on a single strip. These are separated by a hydrophobic strip, which reliably prevents the indicator colours from bleeding into one another whilst also enhancing the paper’s mechanical stability. Conveniently supplied on a roll The test paper is supplied on a roll 5 m long and 10 mm wide, so you can always tear off exactly the right amount as and when needed. When stored at 4–30 °C, the shelf life from the date of manufacture is 3 years. Application Graduated in whole pH units from 1 to 12 (pH 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12). No instrument evaluation required. Readings are taken visually by colour comparison. Technical details Graduation pH - 1 • 2 • 3 • 4 • 5 • 6 • 7 • 8 • 9 • 10 • 11 • 12 Platform Products for pH determination Compatible with No instrument analysis Scope of delivery 1 roll, 5 m long and 10 mm wide Shelf life (from date of manufacture) 3 year(s) Storage temperature 4–30 °C Gross weight (including packaging) 25.03 g Packaging dimensions 62 x 17 x 62 mm CE-marked No Hazardous substances No Trademark DUOTEST
Macherey-Nagel reagent case with PF-3 Drinking Water, liquid chlorine, 934124
The reagent case with PF-3 Drinking Water and liquid chlorine reagent from Macherey-Nagel contains the PF-3 Drinking Water compact photometer and five VISOCOLOR ECO test kits for chlorine (free and total), chlorine dioxide, iron, fluoride and pH. According to the manufacturer, the PF-3 Drinking Water allows drinking water to be checked quickly and easily every day, at all water sampling points and in water treatment. The instrument is intended for mobile drinking water analysis. The case has room for further test kits and can be equipped individually.Tests includedParameterTest kit (REF)MethodMeasuring rangeTestsChlorine (free and total)VISOCOLOR ECO Chlorine 2 (931215)DPD, photometric0.05 to 2.00 mg/L Cl₂150Chlorine dioxideVISOCOLOR ECO Chlorine dioxide (931221)DPD, photometric0.20 to 3.80 mg/L ClO₂150IronVISOCOLOR ECO Iron 2 (931226)Triazine, photometric0.04 to 2.00 mg/L Fe100FluorideVISOCOLOR ECO Fluoride (931227)SPADNS, photometric0.1 to 2.0 mg/L F⁻150pHVISOCOLOR ECO pH (931270)Mixed indicator, photometricpH 6.1 to 8.4150PF-3 Drinking Water compact photometerThe housing of the PF-3 Drinking Water is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour). Three LEDs measure at 450, 530 and 590 nm; the samples are in round cuvettes with 16 mm outer diameter in the open cuvette slot. According to the manual, extraneous light does not interfere with the measurement. 50 measured values with date and time stay in memory; export is via mini-USB and the free NANOCOLOR data export software. The instrument runs on three AA batteries or via USB. According to the flyer, new tests and parameters can be loaded at any time. For calibration with the calibration cuvette, the manufacturer recommends at least once a year.Liquid or solid chlorineBoth cases differ in the chlorine test. This case contains Chlorine 2: measuring range 0.05 to 2.00 mg/L Cl₂, 150 tests, test kit shelf life 1.5 years. The reagents are liquid and are dosed in drops. The reagent case with PF-3 Drinking Water and solid chlorine reagent (934125) contains Chlorine 6: measuring range 0.05 to 6.00 mg/L Cl₂, 200 tests, test kit shelf life 2 years, a solid powder as the first reagent. Chlorine dioxide, Iron 2, fluoride and the pH test are the same in both cases. Anyone who expects chlorine values above 2 mg/L needs the case with Chlorine 6, because Chlorine 2 only measures up to 2.00 mg/L.Typical applicationsDaily checks at water sampling pointsMonitoring in water treatmentMobile drinking water analysis for water suppliers and water consumersDetermination of the drinking water parameters chlorine, chlorine dioxide, pH, iron and fluorideTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet.PhotometerPF-3 Drinking Water, LED photometer with 3 interference filtersWavelengths450 nm, 530 nm, 590 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions385 × 306 × 180 mmGross weight (including packaging)2,346 gStorage temperature15 to 25 °CShelf life (from production)1.5 yearsHazardous substancesYesGHS pictogramsGHS05 (corrosive)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIScope of delivery1 case with foam insert and PF-3 Drinking Water compact photometerVISOCOLOR ECO test kits for chlorine, chlorine dioxide, iron, fluoride and pH (REF in the table)1 calibration cuvette and 4 empty cuvettes1 beaker and 1 syringe (5 mL)3 batteries (AA)PF-3 manual, booklet with the VISOCOLOR ECO test instructions, certificateRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the test kits are also available. Enquiries about accessories, equipping with further tests or larger quantities are handled by our procurement service.
Macherey-Nagel VISOCOLOR soil reagent case with PF-3 Soil, 934210
The Macherey-Nagel VISOCOLOR soil reagent case with PF-3 Soil is the version without sample preparation. The case holds the PF-3 Soil compact photometer and four VISOCOLOR ECO test kits for ammonium, potassium, nitrate and phosphate. According to the manufacturer, it is intended for the analysis of soil samples, has room for further test kits and can be equipped individually.Tests includedParameterTest kit (REF)MethodMeasuring rangeTestsAmmoniumVISOCOLOR ECO Ammonium 3 (931208)Indophenol0.1 to 2.5 mg/L NH₄⁺50PotassiumVISOCOLOR ECO Potassium (931232)Potassium tetraphenylborate, turbidity2 to 25 mg/L K⁺60NitrateVISOCOLOR ECO Nitrate (931241)Azo dye4 to 60 mg/L NO₃⁻110Phosphate (ortho)VISOCOLOR ECO Phosphate (931284)Phosphomolybdenum blue0.2 to 5.0 mg/L PO₄-P80The soil methods are pre-programmed in the instrument and take the dilution into account, so that results appear in mg/kg soil. According to the manual of the soil reagent case, this applies only if the sample has been prepared according to this manual.PF-3 Soil compact photometerThe PF-3 Soil measures at three LED wavelengths (365, 450 and 660 nm) in round cuvettes with 16 mm outer diameter. The cuvette slot is open; according to the manual, the instrument is insensitive to extraneous light. It stores 50 measured values with date and time and transfers them via mini-USB. With the free NANOCOLOR data export software, the data can be exported and up to 10 custom methods can be created. The housing is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour). The manufacturer recommends calibrating the instrument with the calibration cuvette at least once a year.934210 or 934220This case does not contain accessories for soil extraction. Balance, sieve, extraction solutions, filters and shaking bottles are part of the VISOCOLOR soil reagent case with PF-3 Soil and accessories (934220). It also includes pH-Fix, QUANTOFIX Nitrate/Nitrite for pH and nitrite, a workbook in four languages and the VISOCOLOR manual. The four photometric test kits are the same in both cases. Anyone who cannot prepare soil samples themselves chooses the case with accessories. Anyone who already covers extraction with their own equipment manages with this smaller case.Typical applicationsQuick assessment of nutrient conditions in the soilDetermination of nitrate, phosphate, potassium and ammonium for measures such as fertilisation or limingMobile soil analysis directly on siteSoil analysis in the laboratory with own sample preparationTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet.PhotometerPF-3 Soil, LED photometer with 3 interference filtersWavelengths365 nm, 450 nm, 660 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions370 × 303 × 164 mmGross weight (including packaging)2,250 gShelf life (from production)1.5 yearsHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS09 (hazardous to the environment)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIScope of delivery1 case with foam insert and PF-3 Soil compact photometerVISOCOLOR ECO test kits for ammonium, potassium, nitrate and phosphate (REF in the table)1 calibration cuvette and 4 empty cuvettes1 beaker and 1 syringe (5 mL)3 batteries (AA)PF-3 manual, booklet with the VISOCOLOR ECO test instructions, certificateRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the four test kits are also available, as are NANOCOLOR tube tests that the PF-3 Soil evaluates, for example NANOCOLOR Nitrate 50. Enquiries about accessories, equipping or larger quantities are handled by our procurement service.
Macherey-Nagel VISOCOLOR ECO reagent case, 931301
The VISOCOLOR ECO reagent case 931301 contains seven ECO tests for on-site water analysis: ammonium, carbonate hardness, total hardness, nitrate, nitrite, pH and phosphate. Macherey-Nagel describes it as a mini-lab for visual water analysis. Evaluation is without a photometer, using the colour chart or, for the two hardness tests, by counting drops.Seven tests and their measuring rangesAccording to the manufacturer, the ECO tests have colour-coded reagents and instructions with pictograms.ParameterTestEvaluationMeasuring range or levelsTestsAmmoniumECO Ammonium 3Colour comparison0 to 3 mg/L NH₄⁺; levels 0; 0.2; 0.3; 0.5; 0.7; 1; 2; 350Carbonate hardnessECO Carbonate hardnessTitration, drop counting1 drop corresponds to 1 °d100Total hardnessECO Total hardnessTitration, drop counting1 drop corresponds to 1 °d110NitrateECO NitrateColour comparison0 to 120 mg/L NO₃⁻; levels 0; 1; 3; 5; 10; 20; 30; 50; 70; 90; 120110NitriteECO NitriteColour comparison0 to 0.5 mg/L NO₂⁻; levels 0; 0.02; 0.03; 0.05; 0.07; 0.1; 0.2; 0.3; 0.5120pHECO pH 4.0 to 9.0Colour comparisonpH 4.0 to 9.0; levels 4.0; 5.0; 6.0; 6.5; 7.0; 7.5; 8.0; 8.5; 9.0450PhosphateECO PhosphateColour comparison0 to 5 mg/L PO₄-P; levels 0; 0.2; 0.3; 0.5; 0.7; 1; 2; 3; 580For carbonate hardness and total hardness, 1 drop corresponds to 1 °d, which is 1.25 °e or 1.78 °f.931301 or 931304The larger VISOCOLOR reagent case 931304 has the same tests for Ammonium 3, nitrite, pH and phosphate. Instead of nitrate, carbonate hardness and ECO total hardness, it contains the HE tests for alkalinity, total hardness H 20 F and oxygen. If you need to measure nitrate or carbonate hardness, you need the 931301. If you want to determine oxygen or alkalinity, choose the 931304.Typical applicationsAccording to Macherey-Nagel, the cases in this range are intended for water wardens, fish farmers and anyone who wants to determine important water values quickly. The brochure lists these applications:Monitoring of fishing watersDrinking water analysisWater monitoring in swimming poolsTeaching in schoolsGeneral on-site water analysisAccording to the manufacturer, the individual tests are specified for wastewater, groundwater, surface water and drinking water. The titration tests also apply to production water and process water.Shelf life and storageThe case has a shelf life of 1.5 years from production. According to the manufacturer, the individual tests have different shelf lives: pH and phosphate 3 years, carbonate hardness 2 years, the other tests 1.5 years. Storage is at 15 to 25 °C. According to the manufacturer, test instructions and analytical accessories are already included in the case. It has a foam inlay.Technical detailsParametersAmmonium, carbonate hardness, total hardness, nitrate, nitrite, pH, phosphateEvaluationvisual (colour chart, drop counting)Photometer includedNoCase dimensions340 x 275 x 83 mmPackaging dimensions365 x 305 x 168 mmGross weight (including packaging)1,765 gShelf life (from production)1.5 yearsStorage temperature15 to 25 °CHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS09 (hazardous to the environment)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIThe labelling corresponds to Section 2.2 of the safety data sheet and applies to the product as a whole. The individual reagents are classified separately in the manufacturer’s safety data sheet.Scope of deliveryReagent caseTests for seven parameters (see table)Accessories and instructionsIndividual requirements and procurement serviceRefill packs for ammonium, nitrate, nitrite, pH and phosphate are also available, as are accessories such as measuring glasses and sliding comparator. According to the brochure, Macherey-Nagel does not offer refill packs for carbonate hardness and total hardness of the ECO range. Enquiries are handled by our procurement service.
Macherey-Nagel reagent case with PF-3 Drinking Water, solid chlorine, 934125
The reagent case with PF-3 Drinking Water and solid chlorine reagent from Macherey-Nagel contains the PF-3 Drinking Water compact photometer and five VISOCOLOR ECO test kits for chlorine (free and total), chlorine dioxide, iron, fluoride and pH. According to the manufacturer, the PF-3 Drinking Water allows drinking water to be checked quickly and easily every day, at all water sampling points and in water treatment. The instrument is intended for mobile drinking water analysis. The case has room for further test kits and can be equipped individually.Tests includedParameterTest kit (REF)MethodMeasuring rangeTestsChlorine (free and total)VISOCOLOR ECO Chlorine 6 (931217)DPD, photometric0.05 to 6.00 mg/L Cl₂200Chlorine dioxideVISOCOLOR ECO Chlorine dioxide (931221)DPD, photometric0.20 to 3.80 mg/L ClO₂150IronVISOCOLOR ECO Iron 2 (931226)Triazine, photometric0.04 to 2.00 mg/L Fe100FluorideVISOCOLOR ECO Fluoride (931227)SPADNS, photometric0.1 to 2.0 mg/L F⁻150pHVISOCOLOR ECO pH (931270)Mixed indicator, photometricpH 6.1 to 8.4150PF-3 Drinking Water compact photometerThe PF-3 Drinking Water measures at three LED wavelengths (450, 530 and 590 nm) in round cuvettes with 16 mm outer diameter. The cuvette slot is open; according to the manual, the instrument is insensitive to extraneous light. It stores 50 measured values with date and time and transfers them via mini-USB. The free NANOCOLOR data export software exports the data; according to the flyer, new tests and parameters can be loaded at any time. The housing is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour). The manufacturer recommends calibrating the instrument with the calibration cuvette at least once a year.Solid or liquid chlorineThe two cases differ in the chlorine test. This case contains Chlorine 6: measuring range 0.05 to 6.00 mg/L Cl₂, 200 tests, test kit shelf life 2 years. The first reagent is a solid powder, the second is liquid. The reagent case with PF-3 Drinking Water and liquid chlorine reagent (934124) contains Chlorine 2: measuring range 0.05 to 2.00 mg/L Cl₂, 150 tests, test kit shelf life 1.5 years, reagents in liquid form that are dosed in drops. Chlorine dioxide, Iron 2, fluoride and the pH test are the same in both cases. If you expect chlorine values above 2 mg/L, choose the case with Chlorine 6. Up to 2 mg/L both versions are sufficient; the choice then depends on the number of tests and the dosing.Typical applicationsDaily checks at water sampling pointsMonitoring in water treatmentMobile drinking water analysis for water suppliers and water consumersDetermination of the drinking water parameters chlorine, chlorine dioxide, pH, iron and fluorideTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet.PhotometerPF-3 Drinking Water, LED photometer with 3 interference filtersWavelengths450 nm, 530 nm, 590 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions381 × 309 × 180 mmGross weight (including packaging)2,311 gStorage temperature15 to 25 °CShelf life (from production)1.5 yearsHazardous substancesYesGHS pictogramsGHS05 (corrosive)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIScope of delivery1 case with foam insert and PF-3 Drinking Water compact photometerVISOCOLOR ECO test kits for chlorine, chlorine dioxide, iron, fluoride and pH (REF in the table)1 calibration cuvette and 4 empty cuvettes1 beaker and 1 syringe (5 mL)3 batteries (AA)PF-3 manual, booklet with the VISOCOLOR ECO test instructions, certificateRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the test kits are also available. Enquiries about accessories, equipping with further tests or larger quantities are handled by our procurement service.
Macherey-Nagel VISOCOLOR reagent case, 931304
The VISOCOLOR reagent case 931304 combines four ECO tests with three HE tests for visual on-site water analysis. It measures ammonium, nitrite, pH, phosphate, alkalinity, total hardness and oxygen. The HE tests titrate with a syringe and, according to the manufacturer, are designed for determining low limit values. A photometer is not part of the case.Two test series in one caseThe ECO tests are evaluated with the colour chart. For the HE tests, the measuring range applies to one syringe filling in each case. Alkalinity AL 7 is the acid capacity (SBV). The oxygen test SA 10 works according to the Winkler method.ParameterTestEvaluationMeasuring range or levelsTestsAmmoniumECO Ammonium 3Colour comparison0 to 3 mg/L NH₄⁺; levels 0; 0.2; 0.3; 0.5; 0.7; 1; 2; 350NitriteECO NitriteColour comparison0 to 0.5 mg/L NO₂⁻; levels 0; 0.02; 0.03; 0.05; 0.07; 0.1; 0.2; 0.3; 0.5120pHECO pH 4.0 to 9.0Colour comparisonpH 4.0 to 9.0; levels 4.0; 5.0; 6.0; 6.5; 7.0; 7.5; 8.0; 8.5; 9.0450PhosphateECO PhosphateColour comparison0 to 5 mg/L PO₄-P; levels 0; 0.2; 0.3; 0.5; 0.7; 1; 2; 3; 580AlkalinityHE AL 7Titration with a syringe0.2 to 7.2 mmol/L OH⁻ per syringe filling200Total hardnessHE H 20 FTitration with a syringe0.5 to 20.0 °d (0.1 to 3.6 mmol/L Ca²⁺) per syringe filling200OxygenHE SA 10Titration with a syringe0.2 to 10.0 mg/L O₂ per syringe filling100931304 or 931301Both cases have the same tests for Ammonium 3, nitrite, pH and phosphate. The 931304 also measures oxygen and alkalinity, but lacks nitrate and carbonate hardness. These two parameters and the ECO total hardness are included in the VISOCOLOR ECO reagent case 931301. It measures 340 x 275 x 83 mm instead of 450 x 360 x 140 mm and, at 1,765 g gross, weighs less than half as much as the 931304 (3,750 g).Typical applicationsWater monitoring in swimming pools and drinking water analysisMonitoring of fishing waters by water wardens and fish farmersWater analysis in school lessonsGeneral water analysis at the sampling pointAccording to the manufacturer, the individual tests are specified for wastewater, groundwater, surface water and drinking water and are suitable for seawater analysis.Shelf lifeThe case has a shelf life of 1.5 years from production. pH and phosphate keep for 3 years, alkalinity 2 years, the other tests 1.5 years. Storage is at 15 to 25 °C.Technical detailsParametersAmmonium, nitrite, pH, phosphate, alkalinity, total hardness, oxygenEvaluationvisual (colour chart, titration syringe)Photometer includedNoCase dimensions450 x 360 x 140 mmPackaging dimensions493 x 395 x 197 mmGross weight (including packaging)3,750 gShelf life (from production)1.5 yearsStorage temperature15 to 25 °CHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS09 (hazardous to the environment)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIThe labelling corresponds to Section 2.2 of the safety data sheet and applies to the product as a whole. The individual reagents are classified separately in the manufacturer’s safety data sheet.Scope of deliveryReagent caseTests for seven parameters (see table)Accessories and instructionsIndividual requirements and procurement serviceRefill packs for the individual parameters are also available. Enquiries are handled by our procurement service.
Macherey-Nagel VISOCOLOR environmental reagent case with PF-12Plus, 914353
The VISOCOLOR environmental reagent case 914353 contains the PF-12Plus compact photometer and tests for eight parameters: ammonium, carbonate hardness, iron, total hardness, nitrate, nitrite, phosphate and pH. Five tests are evaluated photometrically on the PF-12Plus, pH visually with the colour chart, and the two hardness tests titrimetrically with a syringe. Macherey-Nagel describes the case as equipment for a complete on-site water analysis.The PF-12Plus photometerThe PF-12Plus is a single-beam filter photometer with a high-pressure xenon lamp. An automatic filter wheel switches between seven interference filters at 345, 436, 470, 540, 585, 620 and 690 nm. In addition, an 860 nm LED measures turbidity nephelometrically from 1 to 1,000 NTU. The instrument accepts round cuvettes with a diameter of 16 mm, stores 1,000 measured values in a GLP-compliant manner and displays them on an illuminated graphic display with 64 x 128 pixels. The tests are called up by their test number; operation is via menu guidance and a membrane keypad.The housing has degree of protection IP 68 (dust- and waterproof), measures 215 x 100 x 65 mm and weighs 0.7 kg. Power comes from four AA batteries or rechargeable batteries, a USB cable or a USB power supply. Data is transferred and updates are installed via the USB port. According to the manufacturer, the results can be exported to Excel with the NANOCOLOR data export software.Tests includedThe five ECO tests are evaluated photometrically on the PF-12Plus. pH, carbonate hardness and total hardness are determined without a photometer.ParameterTestEvaluationMeasuring range or levelsTestsAmmoniumECO Ammonium 15photometric, 585 nm, test 5-10photometric, 0.5 to 8.0 mg/L NH₄⁺50IronECO Iron 2photometric, 540 nm, test 5-26photometric 0.04 to 2.00 mg/L Fe100NitrateECO Nitratephotometric, 436 nm, test 5-41photometric 4.0 to 60.0 mg/L NO₃⁻110NitriteECO Nitritephotometric, 540 nm, test 5-44photometric 0.02 to 0.50 mg/L NO₂⁻120PhosphateECO Phosphatephotometric, 690 nm, test 5-84photometric 0.2 to 5.0 mg/L PO₄-P80pHECO pH 4.0 to 9.0visual, colour comparisonpH 4.0 to 9.0; levels 4.0; 5.0; 6.0; 6.5; 7.0; 7.5; 8.0; 8.5; 9.0450Carbonate hardnessHE C 20titrimetric, syringe0.5 to 20.0 °d (0.2 to 7.2 mmol/L H⁺) per syringe filling200Total hardnessHE H 20 Ftitrimetric, syringe0.5 to 20.0 °d (0.1 to 3.6 mmol/L Ca²⁺) per syringe filling200Typical applicationsAccording to the manufacturer, the PF-12Plus measures directly at the sampling location and is robust and waterproof. The flyer lists these fields of application:Drinking waterSewage treatment plants and small wastewater treatment plantsBathing watersBreweries and malthousesMetalworkingFor cases in this range, the brochure also lists swimming pools, schools and monitoring of fishing waters. According to Macherey-Nagel, the case can be equipped individually with further VISOCOLOR test kits, test papers and accessories.Technical detailsPhotometerPF-12Plus compact photometerParametersAmmonium, carbonate hardness, iron, total hardness, nitrate, nitrite, phosphate, pHWavelengths345, 436, 470, 540, 585, 620 and 690 nmTurbidity measurement1 to 1,000 NTU (860 nm)Data storage1,000 measured valuesPhotometer degree of protectionIP 68Photometer dimensions215 x 100 x 65 mmPhotometer weight0.7 kgCase dimensions450 x 360 x 140 mmPackaging dimensions495 x 393 x 195 mmGross weight (including packaging)4,420 gShelf life of reagents (from production)1.5 yearsStorage temperature of reagents15 to 25 °CHazardous substancesYesGHS pictogramsGHS02 (flammable), GHS05 (corrosive), GHS09 (hazardous to the environment)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage)Precautionary statementsP260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIThe labelling corresponds to Section 2.2 of the safety data sheet and applies to the product as a whole. It relates to the reagents; the photometer itself is not a hazardous substance. The individual reagents are classified separately in the manufacturer’s safety data sheet.Scope of deliveryCasePF-12Plus compact photometerCalibration cuvetteTests for eight parameters (see table)AccessoriesManual and instructionsCertificateRegulatory informationThe PF-12Plus photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the tests included, reaction tubes with 16 mm outer diameter and 25 mL beakers are also available. Enquiries are handled by our procurement service.
Macherey-Nagel reagent case with PF-3 Pool, liquid chlorine, 934118
The reagent case with PF-3 Pool and liquid chlorine reagent from Macherey-Nagel contains the PF-3 Pool compact photometer and four VISOCOLOR ECO test kits for the classic swimming pool parameters chlorine (free and total), pH, cyanuric acid and alkalinity. According to the manufacturer, it is intended for the analysis of swimming pool samples, has room for further test kits and can be equipped individually.Tests includedParameterTest kit (REF)MethodMeasuring rangeTestsAlkalinityVISOCOLOR ECO Alkalinity TA (931204)Bromophenol blue, photometric0.3 to 14.0 °d (5 to 250 mg/L CaCO₃)100Chlorine (free and total)VISOCOLOR ECO Chlorine 2 (931215)DPD, photometric0.05 to 2.00 mg/L Cl₂150Cyanuric acidVISOCOLOR ECO Cyanuric acid (931223)Triazine, turbidity, photometric10 to 100 mg/L100pHVISOCOLOR ECO pH (931270)Mixed indicator, photometricpH 6.1 to 8.4150PF-3 Pool compact photometerThe PF-3 Pool is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour) and runs on three AA batteries or via USB. It measures with three LEDs at 450, 530 and 590 nm in round cuvettes with 16 mm outer diameter; the cuvette slot stays open, and according to the manual extraneous light does not interfere. Up to 50 measured values with date and time are held in memory and can be exported via mini-USB and the free NANOCOLOR data export software. The manufacturer recommends calibration with the calibration cuvette at least once a year.According to the flyer, the PF-3 Pool also evaluates further VISOCOLOR ECO tests, for example for bromine, chlorine dioxide, fluoride and iron. They are not part of the case but are also available.Liquid or solid chlorineBoth pool cases differ only in the chlorine test. This case contains Chlorine 2: measuring range 0.05 to 2.00 mg/L Cl₂, 150 tests, test kit shelf life 1.5 years. The reagents are liquid and are dosed in drops. The reagent case with PF-3 Pool and solid chlorine reagent (934119) contains Chlorine 6: measuring range 0.05 to 6.00 mg/L Cl₂, 200 tests, test kit shelf life 2 years, a solid powder as the first reagent. Alkalinity, cyanuric acid and pH are the same in both cases. The manufacturer gives the shelf life of the case as 1 year for both versions; according to the brochure, the TA alkalinity test also has a shelf life of 1 year. Anyone who has to measure chlorine values above 2 mg/L needs the case with Chlorine 6.Typical applicationsWater analysis for swimming pools and their operatorsOn-site monitoring of chlorine and pHDetermination of cyanuric acid and alkalinity (total alkalinity)Use in the laboratory and at all sampling pointsTechnical detailsThe hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet. H314 is due to the chlorine reagent Cl2-2, H351 to the cyanuric acid reagent Cya-1. The manufacturer’s safety data sheet should be read before use.PhotometerPF-3 Pool, LED photometer with 3 interference filtersWavelengths450 nm, 530 nm, 590 nm (± 2 nm)CuvettesRound cuvettes, 16 mm outer diameterData storage50 measured values with date and timeInterfaceMini-USB (power supply and data export)Degree of protectionIP68Power supply3 AA batteries or USBPhotometer, dimensions and weight170 × 95 × 68 mm, 0.5 kgPackaging dimensions370 × 302 × 163 mmGross weight (including packaging)2,200 gStorage temperature15 to 25 °CShelf life (from production)1 yearHazardous substancesYesGHS pictogramsGHS05 (corrosive), GHS08 (health hazard)Signal wordDangerHazard statementsH314 (Causes severe skin burns and serious eye damage), H351 (Suspected of causing cancer)Precautionary statementsP201, P202, P260, P264, P280, P303+361+353, P305+351+338, P310, P405, P501TransportUN 3316 Chemical kit, Class 9, Packing Group IIScope of delivery1 case with foam insert and PF-3 Pool compact photometerVISOCOLOR ECO test kits for alkalinity, chlorine, cyanuric acid and pH (REF in the table)1 calibration cuvette and 4 empty cuvettes1 beaker and 1 syringe (5 mL)3 batteries (AA)PF-3 manual, booklet with the VISOCOLOR ECO test instructions, certificateRegulatory informationThe PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.Individual requirements and procurement serviceRefill packs for the test kits are also available. Enquiries about accessories, equipping with further tests or larger quantities are handled by our procurement service.
Visual or photometric: which evaluation fits
With the VISOCOLOR cases without photometer, the result is read from the colour comparison, for hardness and alkalinity by counting drops or with the titration syringe. This is sufficient for water wardens, fish farming and teaching. The cases with PF-3 compact photometer and the environmental case with PF-12Plus give numerical values, store the measurements and export them via USB. Anyone who has to document values is better served by a photometer case.
Which case for which application
The case with PF-3 Pool covers the swimming pool parameters chlorine, pH, cyanuric acid and alkalinity. The case with PF-3 Drinking Water measures chlorine, chlorine dioxide, pH, iron and fluoride; both are available in two chlorine variants. For fishing waters, the VISOCOLOR Fish case determines six parameters by colour comparison, and the version with PF-3 Fish reaches 14. For soil there are three cases; the differences are explained in the questions below. The School case determines ammonium and pH, and its reagents correspond to GUV-SR 2004 for teaching. ECO case, reagent case and environmental case cover general water analysis.
Cuvette tests: photometer and, for COD, a thermal block
The NANOCOLOR tube tests are intended for laboratories and sewage treatment plants and run on NANOCOLOR photometers such as VIS II, Advance and PF-12Plus; COD 160 and COD 4000 also run on the PF-3 COD. Two parameters require digestion in a thermal block before measurement: COD at 148 °C, total nitrogen for 30 minutes at 120 °C. With few exceptions, the reagents are labelled hazardous substances, and most cases are shipped as a chemical kit (UN 3316).
Frequently asked questions
Do I need a photometer for the reagent cases?
Not for School, Fish, ECO, the reagent case 931304 and the soil case 931601; they are evaluated visually. The cases with PF-3 or PF-12Plus include the photometer. The NANOCOLOR cuvette tests, on the other hand, always need a photometer.
Solid or liquid chlorine, what is the difference?
The pool and drinking water cases are available with the powder reagent Chlorine 6 (200 tests, 0.05 to 6.00 mg/L) or with the drop reagents Chlorine 2 (150 tests, 0.05 to 2.00 mg/L). The other tests in the case are the same. For high chlorine values, the solid variant is better suited.
Which soil case do I need?
The soil case without photometer (931601) measures pH and ammonium with test strips and includes the accessories for preparing the extract. The case with PF-3 Soil (934210) contains the photometer and tests for ammonium, potassium, nitrate and phosphate, but no extraction accessories. The version with accessories (934220) has both, plus pH and nitrite. Anyone who does not yet have equipment for sample preparation takes the large version.
