Disposable gloves
Disposable gloves, also known as single-use gloves, made of nitrile and latex for laboratories, medical practices, workshops and food businesses, powder-free, in sizes from XS to XXL. The nitrile gloves from Meditrade and Unigloves are latex-free, and many of them are, according to the manufacturer, class I medical devices, tested to EN 455, and chemical protective gloves to EN ISO 374-1. Latex gloves fit more snugly and stretch more; they are not an option for people with a latex allergy.
Meditrade Nitril Black Examination Gloves, black (100 pcs.), M, 1284M
Black nitrile gloves are widely used in the tattoo and beauty industries, as the dark colour gives a professional appearance and any ink or pigment residue is not immediately noticeable. Meditrade Nitril Black examination gloves are powder-free, latex-free, disposable nitrile gloves with a micro-textured, elastic and tear-resistant surface, available in sizes S, M, L and XL, each in packs of 100. Latex-free for sensitive skin The gloves are completely latex-free and are therefore a suitable choice for staff with a diagnosed type 1 latex allergy, regardless of the area of application. The force at break is 6 N, tested to an AQL value of 1.5, the standard sampling inspection level for the leak-tightness of disposable gloves. Thickness varies by zone The Nitril Black gloves feature varying thicknesses across different zones: the thickness on the palm is 0.07 mm (± 0.02 mm), on the fingertips 0.10 mm (± 0.02 mm) for added grip on the fingertips, and 0.05 mm (± 0.02 mm) at the cuff for easier donning. This variation in thickness is common in nitrile gloves, as the fingertips are subject to the highest mechanical stress, whilst the wrist primarily requires elasticity. Nitrile as the material of choice Nitrile is a synthetic rubber which, unlike natural latex, does not contain the allergy-triggering latex proteins, whilst offering greater puncture and chemical resistance than latex. For businesses that avoid natural latex entirely for hygiene or compliance reasons, nitrile is therefore the obvious alternative to traditional latex gloves. Furthermore, nitrile retains its shape well even after prolonged wear, which noticeably enhances comfort throughout the entire shift in professions where gloves are changed frequently throughout the day. Tested according to EN 455 and EN ISO 374 Nitril Black complies with EN 455 (Parts 1 to 4) for medical disposable gloves, as well as the test standards of the EN ISO 374 series (Parts 1, 2, 4 and 5) for protective gloves against microorganisms and chemicals. In addition, the data sheet lists EN 16523-1 for determining resistance to chemical permeation. The manufacturer also classifies them as food-safe, which is relevant, for example, for inspection tasks in food processing or the catering industry. EN 16523-1 specifies how long it takes and to what extent a chemical penetrates the glove material, providing an additional indicator alongside the pure microorganism barrier as defined by EN ISO 374. Selection guide: choosing the right size The size range starts at S and goes through M and L to XL; there is no XS size for this model. We can provide width and length measurements on request; when selecting a size, we also recommend comparing it with the size of a disposable glove you already own that fits well. SizeManufacturer’s item no.EAN S1284S4250016405078 M1284M4250016405085 L1284L4250016405092 XL1284XL4250016405108 Differentiation within the nitrile range Several other Meditrade nitrile gloves with the same thickness gradation on the palm, fingertips and cuff are available alongside the Nitril Black. For those looking for a light-coloured glove for food processing rather than the dark contrasting colour, the Meditrade Nitril 3000 in white offers an alternative with identical wall thickness and additionally documented carton and pallet dimensions. For businesses using colour-coding by station or shift, the Meditrade Nitril Viola in purple is also available. Anyone requiring a variant tested against blood-borne pathogens with a wider size range up to XXL will find this in the Meditrade Nitril NextGen. Use and disposal We can provide details of storage conditions and shelf life on request. According to the manufacturer, the glove is non-sterile and intended for single use; it can be worn on either hand. After use, disposable gloves are usually disposed of as commercial waste; contaminated gloves are disposed of separately, depending on internal hazardous substances regulations. Typical applications The black colour of these nitrile gloves makes them suitable for a variety of sectors and applications: Tattoo and beauty salons, where black is an established, professional-looking colour Catering and event venues, to ensure a uniform, smart appearance for staff Laboratory and examination work, where light-coloured powders, tablets or crystals are more visible on dark gloves than on light-coloured ones General examination and routine tasks where a latex-free, food-safe disposable glove is required For example, when portioning powders or granules in the laboratory, it is immediately apparent whether any residue has become trapped on the dark glove, a contrast that a natural-coloured glove does not provide. Assessing your needs correctly: the pack of 100 for everyday use Nitril Black is sold in packs of 100 per size. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. For businesses with higher consumption of several sizes simultaneously, it is advisable to stock several packs of the relevant sizes straight away, so that no workstation runs out of a particular size. The AQL value of 1.5 indicates the maximum number of defective gloves per batch that are tolerated within the framework of statistical sampling; a lower value indicates a stricter inspection. If you stock several sizes at the same time, you can distinguish between the packs of 100 at a glance using the manufacturer’s item number, without having to open the individual packs first. Frequently asked questions about Nitril Black Is Nitril Black latex-free?Yes, the glove is made entirely from nitrile and is therefore latex-free. Is Nitril Black sterile?No, according to the manufacturer, it is a non-sterile, single-use glove. How thick is the glove?The thickness is 0.07 mm on the palm, 0.10 mm at the fingertips and 0.05 mm at the cuff, each with a tolerance of ± 0.02 mm. What sizes are available?S, M, L and XL. There is no XS size for this model. Is the glove food-safe?Yes, the manufacturer classifies it as food-safe. What is the medical device class and PPE category of the glove?According to the data sheet, the glove is a class I medical device (Regulation (EU) 2017/745) and category III PPE (Regulation (EU) 2016/425). Technical details MaterialNitrile ColourBlack SurfaceMicro-textured, elastic, tear-resistant Thickness (palm)0.07 mm ± 0.02 mm Thickness at fingertips0.10 mm ± 0.02 mm Cuff thickness0.05 mm ± 0.02 mm Force at break6 N AQL1.5 PropertiesPowder-free, latex-free, food-safe, non-sterile, ambidextrous StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1 Scope of delivery 1 pack = 100 Meditrade Nitril Black examination gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities or a different colour from the Meditrade nitrile range? Our procurement service will be happy to support you with the suitable selection.
Meditrade Nitril NextGen Examination Gloves, blue, 100 pcs., size L, 1283L
Some applications require more than the basic protection typically offered by nitrile gloves, for example where, in addition to protection against contamination, the penetration of blood-borne pathogens must also be reliably prevented. Meditrade Nitril NextGen examination gloves are available in six sizes from XS to XXL and are additionally tested to ASTM F 1671. Powder-free, latex-free and available in blue, each pack containing 100 gloves. Latex-free and tested against blood-borne pathogens According to the manufacturer, the NextGen is produced without natural rubber latex and is therefore suitable for organisations that consistently rely on latex-free personal protective equipment. Beyond the series of standards customary for nitrile gloves, EN 455 and EN ISO 374, it is also tested according to ASTM F 1671 for the penetration of blood-borne pathogens, supplemented by EN 16523 for chemical permeation and DIN EN ISO 374-5 for protection against microorganisms. This additional testing distinguishes the NextGen from the simpler nitrile variants in the range. Thickness at the palm, shaft and fingertips According to the data sheet, the thickness at the palm is 0.07 mm (± 0.02 mm), at the fingertips 0.10 mm (± 0.02 mm) and on the shaft also 0.07 mm (± 0.02 mm), ensuring that the cuff area remains mechanically robust, rather than being thinner as is the case with some other nitrile gloves. The median force at break is at least 6.0 N both before and after artificial ageing, tested with an AQL value of 1.5. ASTM F 1671: what the additional test entails ASTM F 1671 tests whether a glove material can withstand the penetration of a bacteriophage, used as a model organism for blood-borne pathogens, under defined pressure. For workplaces with an increased risk of exposure, such as in emergency care or during invasive procedures, such an additional test is an indication of a higher level of protection than that offered by a nitrile glove which has only undergone the basic standards EN 455 and EN ISO 374. Combined with the permeation test according to EN 16523, NextGen thus covers both the microbiological and chemical aspects of the barrier performance. Six sizes from XS to XXL With its XXL size, the NextGen also accommodates particularly large hands. The width ranges from 75 mm (± 5 mm) for XS, through 95 mm (± 10 mm) for M, to at least 115 mm for XXL; the length is at least 240 mm for all sizes. SizeManufacturer’s item no.WidthLength XS1283XS75 mm (± 5 mm)min. 240 mm S1283S80 mm (± 10 mm)min. 240 mm M1283M95 mm (± 10 mm)min. 240 mm L1283L110 mm (± 10 mm)min. 240 mm XL1283XL≥ 110 mmmin. 240 mm XXL1283XXL≥ 115 mmmin. 240 mm Distinction within the nitrile range We offer the NextGen alongside several nitrile gloves in different colours from the same Meditrade range. Whilst the Meditrade Nitril 3000 in white, the Meditrade Nitril Black in black and the Meditrade Nitril Viola in purple all share the same basic formulation with a thickness of 0.07/0.10/0.05 mm, the NextGen is additionally tested to ASTM F 1671 against blood-borne pathogens and is available in size XXL. Those who also require a longer cuff for forearm protection will find this in the Meditrade Nitril X-Long, with a cuff length of 295 mm. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use only. According to the data sheet, they contain dithiocarbamates, which should not be used by anyone with a known hypersensitivity to these substances. After use, the gloves are disposed of as commercial waste or via the organisation’s internal hazardous waste disposal system, depending on the level of contamination. Typical applications The additional testing for blood-borne pathogens and the wide range of sizes make the NextGen an obvious choice for: Examination and care activities with increased requirements for barrier protection against pathogens Organisations that operate strictly latex-free whilst needing to cater for large hand sizes up to XXL Laboratory work involving contact with chemicals for which EN 16523 is documented as the permeation test Food processing, for which the glove is suitable according to the data sheet Teams with widely varying hand sizes who wish to maintain a single order list for all staff For example, in an outpatient clinic or laboratory with a changing workforce, the same type of glove can be stocked for almost every hand size without having to switch to a different product range for particularly large hands. Assessing requirements correctly: from the pack to the carton NextGen is sold in packs of 100 per size. According to the manufacturer, one carton holds 10 packs, i.e. 1,000 gloves, with a pallet containing 72 cartons (carton dimensions 295 x 260 x 250 mm). A simple rough calculation helps with demand planning: at a consumption rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. Where there are several workstations with different hand sizes, including XXL, it is advisable to stock each size separately, as experience shows that demand for XXL is lower, but if stock runs out, it is more difficult to reorder at short notice than the more common medium sizes. Setting a fixed minimum stock level for each size in your own stock management system helps to ensure that even sizes ordered less frequently, such as XS or XXL, are reordered in good time. Frequently asked questions about Nitril NextGen What distinguishes NextGen from other nitrile gloves in the range?It is additionally tested according to ASTM F 1671 for resistance to the penetration of blood-borne pathogens and is also available in size XXL. Is the NextGen latex-free?Yes, according to the manufacturer, it is produced without natural rubber latex. How thick is the glove?The thickness is 0.07 mm on the palm and shaft, and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case. Is the glove sterile?No, according to the data sheet, the NextGen is a non-sterile, single-use glove. What sizes are available?XS, S, M, L, XL and XXL, each with its own width specification as per the data sheet. Can I order individual gloves instead of the whole pack?No, the smallest order unit is a pack of 100 gloves per size. What does the additional ASTM F-1671 test mean in practice?It documents that, in laboratory tests, the glove material withstands the penetration of a model organism for blood-borne pathogens under pressure, in addition to the basic standards EN 455 and EN ISO 374. Technical details MaterialNitrile butadiene rubber (NBR) ColourBlue SurfaceMicro-textured, rolled cuff, suitable for both hands Lengthmin. 240 mm Thickness (palm)0.07 mm ± 0.02 mm Fingertip thickness0.10 mm ± 0.02 mm Thickness of shaft0.07 mm ± 0.02 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces), 72 cartons per pallet FeaturesPowder-free, latex-free, non-sterile, ambidextrous, suitable for food contact Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN ISO 21420:2020, EN 16523, ASTM F 1671, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Nitril NextGen examination gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Meditrade nitrile range, or larger purchase quantities for your business? Our procurement service will be happy to support you with the suitable selection.
Meditrade Nitril 3000 Examination Gloves, white (box of 100), L, 1280L
You don’t always need specialist equipment for your daily use of nitrile gloves. Meditrade Nitril 3000 examination gloves are the standard white nitrile gloves in the Meditrade range available from us; they are powder-free, latex-free and come with fully documented packaging and pallet dimensions for logistics planning. Available in sizes S to XL, each in packs of 100. Latex-free with a tried-and-tested basic formulation The glove is made from nitrile butadiene rubber (NBR) containing the following ingredients: antioxidant, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide and potassium hydroxide; it is free from mercaptobenzothiazole and thiurams and, according to the manufacturer, is not manufactured using natural rubber latex. The textured surface with a rolled cuff ensures a secure grip and makes the gloves easier to put on and take off. Thickness from the cuff to the fingertips According to the data sheet, the thickness at the shaft is 0.05 mm (± 0.02 mm), at the palm 0.07 mm (± 0.02 mm) and at the fingertip 0.10 mm (± 0.02 mm), ensuring that the greatest mechanical stress is absorbed at the fingertips. The force at break is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5. White as a neutral base colour Unlike the coloured variants of the Meditrade nitrile range, Nitril 3000 is available in a neutral white colour, which is regarded as the standard colour for examination gloves in many organisations and is compatible with almost any corporate design or hygiene concept. For organisations with no specific need for colour-coding or additional testing, it is therefore often the obvious first choice before a more specialised variant, such as a contrasting colour or an additionally tested version, is considered. Class I medical device and Category III PPE The Nitril 3000 is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN ISO 374-1, -2, -4 and -5, EN 16523-1 for chemical permeation, EN ISO 21420:2020, and is manufactured under a quality management system certified according to EN ISO 13485:2016. According to the data sheet, it is also suitable for contact with food. Selection guide: choosing the right size In our range, the Nitril 3000 is available in sizes S to XL, with widths ranging from 80 mm (± 10 mm) for size S to over 110 mm for size XL. SizeManufacturer’s item no.WidthLength S1280S80 mm (± 10 mm)min. 240 mm M1280M95 mm (± 10 mm)min. 240 mm L1280L110 mm (± 10 mm)min. 240 mm XL1280XL> 110 mmmin. 240 mm Distinctions within the nitrile range Within our Meditrade nitrile range, the Nitril 3000 is the standard white version with fully documented packaging and pallet dimensions. Anyone looking for the same glove in a dark contrasting colour for tattooing, cosmetic or laboratory work involving light-coloured powders will find the Meditrade Nitril Black, which offers the same range of thicknesses. For businesses using colour-coding, the Meditrade Nitril Viola in purple is also available. If you require a variant that has been additionally tested against blood-borne pathogens and is available in sizes up to XXL, you will find this in the Meditrade Nitril NextGen. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use. According to the information in the data sheet, they contain dithiocarbamates, which should not be used by anyone with a known hypersensitivity to these substances. After use, the gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the degree of contamination. Typical applications As the basic variant of the nitrile range, the Nitril 3000 is suitable for a wide range of applications: General examination and routine tasks in medical practices, laboratories and care settings Food processing and catering, for which the glove is suitable according to the data sheet Businesses that require a light-coloured, neutral glove without the need for additional testing Logistics-intensive businesses that can plan precisely thanks to documented carton and pallet dimensions For example, during incoming goods inspection in food processing, the same type of glove can be used consistently, from sampling right through to packaging checks. A neutral, widely used basic variant is also practical in training and educational contexts, as it is not tied to a specific workstation or colour-coding scheme. Assessing requirements correctly: from the pack to the carton The Nitril 3000 is sold in packs of 100 pieces per size. According to the manufacturer, one carton holds 10 packs, i.e. 1,000 gloves, with a pallet containing 72 cartons (carton dimensions 29.5 x 26.0 x 25.0 cm). A simple rough calculation helps with demand planning: at a consumption rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. For larger businesses with multiple workstations, the carton dimensions can also be used to plan storage logistics directly, for example, how many cartons will fit on a pallet or on a warehouse shelf. This makes capacity planning easier, particularly for larger businesses with their own warehousing, without having to first request the dimensions separately from the manufacturer. Why a basic version can be a sensible choice Not every business requires the additional ASTM F-1671 testing offered by NextGen or colour-coding by workstation. Where the nitrile glove is primarily intended to provide reliable basic protection according to EN 455 and EN ISO 374, with traceable logistics, the Nitril 3000 is an economically obvious choice without compromising on force at break, AQL value or certification compared to the other variants in the range. Frequently asked questions about the Nitril 3000 Is the Nitril 3000 latex-free?Yes, according to the manufacturer, it is produced without natural rubber latex. Is the glove sterile?No, according to the data sheet, the Nitril 3000 is a non-sterile, single-use glove. How thick is the glove?According to the data sheet, 0.05 mm on the shaft, 0.07 mm on the palm and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case. How big is a carton and how many fit on a pallet?A carton holds 1,000 gloves (10 packs of 100 each) and measures 29.5 x 26.0 x 25.0 cm; a pallet holds 72 cartons. Are the gloves suitable for food contact?Yes, according to the data sheet, they are suitable for contact with food. Can I order individual gloves instead of the whole pack?No, the pack of 100 pieces per size is the smallest unit sold. How does the Nitril 3000 differ from the coloured variants in the range?It shares the same material and thickness grades as Nitril Black and Nitril Viola, but is the only variant in neutral white without an additional colour-coding function. Technical details MaterialNitrile butadiene rubber (NBR) ColourWhite SurfaceTextured, rolled cuff, suitable for both hands Lengthmin. 240 mm Thickness (palm)0.07 mm ± 0.02 mm Fingertip thickness0.10 mm ± 0.02 mm Thickness of shaft0.05 mm ± 0.02 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces), 72 cartons per pallet FeaturesPowder-free, latex-free, non-sterile, ambidextrous, suitable for food contact Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Nitril 3000 examination gloves (size as per variant selection) Individual requirements and procurement service Do you require larger purchase quantities, a different colour from the Meditrade nitrile range, or assistance with warehouse logistics? Our procurement service will be happy to support you with the suitable selection.
Meditrade Gentle Skin Grip, latex examination gloves, powder-free, 100 pieces - M, 1221GRIP-M
Wet instruments, oily tools or slippery packaging put many disposable gloves to the test: as soon as the surface becomes damp or greasy, the grip decreases noticeably. According to the manufacturer, Meditrade Gentle Skin Grip latex examination gloves are the grippiest latex gloves in the Meditrade range. An acrylic polymer coating on a textured surface provides extra grip where smooth gloves reach their limits. Available in sizes XS to XL, each in packs of 100. Acrylic polymer coating for extra grip In addition to the ingredients typically found in latex gloves, natural rubber latex, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide and antioxidants, the Grip range also features an acrylic polymer coating on the textured surface. This coating is the key difference compared to traditional latex gloves without any special grip optimisation and, according to the manufacturer, improves grip, particularly when handling damp, oily or powdery surfaces. The glove is free from mercaptobenzothiazole and thiurams. Thickness from the cuff to the fingertips According to the manufacturer’s data sheet, the thickness at the cuff is at least 0.08 mm, at the palm at least 0.11 mm and at the fingertips at least 0.12 mm, ensuring that the greatest material thickness is available at the point subject to the most stress. The breaking force is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5 for the absence of holes in the batch. The rolled cuff also makes it easier to put on and take off the gloves, even when the hands themselves are already damp. Class I medical device and PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves, as well as EN ISO 374-1, -2, -4 and -5 for protection against microorganisms, supplemented by EN 16523-1 for chemical permeation and EN 420:2003+A1:2009 as the general standard for protective gloves. It is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment under Regulation (EU) 2016/425, and is manufactured under a quality management system certified according to EN ISO 13485:2016. Why smooth gloves reach their limits in wet conditions A purely textured glove without an additional coating loses some of its grip when it comes into contact with water, oil or cleaning agents, because a thin film of liquid forms between the glove and the workpiece. This is precisely where the acrylic polymer coating of the Gentle Skin Grip comes into its own: according to the manufacturer, it increases friction even in damp conditions without compromising the elasticity of the natural latex. For standard dry tasks without any particular risk of slipping, however, a simpler latex glove from our range is often sufficient. Selection guide: choosing the right size As with the other Gentle Skin gloves, the size range from XS to XL is based on the width of the hand, measured at the widest point excluding the thumb. SizeManufacturer’s item no.WidthLength XS1221GRIP-XS< 80 mmmin. 240 mm S1221GRIP-S80 mm (± 10 mm)min. 240 mm M1221GRIP-M95 mm (± 10 mm)min. 240 mm L1221GRIP-L110 mm (± 10 mm)min. 240 mm XL1221GRIP-XL> 110 mmmin. 240 mm Distinction within the Gentle-Skin latex range Within the Meditrade latex range, the Grip differs from the other two variants primarily due to its coating. Those who, on the other hand, require a particularly fine sense of touch for pipetting and laboratory work are better served by the low-protein Meditrade Gentle Skin Sensitive. For general routine use without any specific grip or protein requirements, the Meditrade Gentle Skin compact+ is available, with a comparable basic wall thickness. All three are tested according to EN 455 and EN ISO 374 and are classified as a Class I medical device and PPE Category III. Those wishing to avoid natural latex entirely will find latex-free alternatives in our range of nitrile gloves, although these do not feature the grip coating described here. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use only. As the gloves are made from natural rubber latex, the manufacturer expressly warns of the risk of allergic or even anaphylactic reactions. After use, the gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the level of contamination. Typical applications The grippy coating makes the Gentle Skin Grip of interest wherever moisture or grease would otherwise make a firm grip difficult: Cleaning and processing of laboratory glassware and instruments, often in contact with water or cleaning agents Handling oily or greasy components in workshops and industry Packaging and order-picking tasks involving frequent changes of material Examination and care tasks where a secure grip on damp surfaces is required For example, when rinsing and sorting laboratory glassware under running water, the grip is maintained, whereas an uncoated glove would slip more easily in the same situation. The difference compared to a smooth glove surface is also clearly evident when handling greasy seals or lubricants in the workshop. Assessing your requirements correctly: from the pack to the carton Gentle Skin Grip is sold in packs of 100 per size; according to the manufacturer’s data sheet, a carton contains 10 packs, i.e. 1,000 gloves. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. Businesses with multiple workstations or frequent glove usage should ideally stock several packs of the appropriate size to ensure that no workstation runs out of a particular size. Frequently asked questions about Gentle Skin Grip What sets the Grip apart from other latex gloves?The textured surface is additionally coated with an acrylic polymer, which, according to the manufacturer, improves grip on damp or oily surfaces. Is the glove sterile?No, according to the data sheet, it is a non-sterile, single-use glove. How thick is the glove?The thickness is at least 0.08 mm on the cuff, 0.11 mm on the palm and 0.12 mm at the fingertips. Is the Grip suitable for people with a latex allergy?No, the glove is made of natural rubber latex and, according to the manufacturer, may trigger allergic or even anaphylactic reactions. What is the shelf life of the glove?According to the data sheet, 3 or 5 years when stored in a cool, dry place, protected from direct sunlight. Is the Grip coating also available on a latex-free glove?For this data sheet, the coating is only documented for the latex version. For a latex-free alternative offering comparable grip performance, our procurement service will be happy to assist you with your selection. What sizes are available?XS, S, M, L and XL, each with its own width specification as per the data sheet, ranging from under 80 mm to over 110 mm. Can I order individual gloves instead of the whole pack?No, the product is sold exclusively in packs of 100 per size. Technical details MaterialNatural rubber latex with an acrylic polymer coating SurfaceTextured, rolled cuff, ambidextrous Lengthmin. 240 mm Cuff thicknessmin. 0.08 mm Palm thicknessmin. 0.11 mm Fingertip thicknessmin. 0.12 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces) CharacteristicsPowder-free, non-sterile, textured, rolled cuff, ambidextrous, free from mercaptobenzothiazole and thiurams Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1, EN 420:2003+A1:2009, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Gentle Skin Grip latex examination gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a latex-free alternative with similar grip, or larger purchase quantities for your business? Our procurement service will be happy to assist you in making the right choice.
Meditrade Gentle Skin Sensitive Latex Gloves, natural colour, powder-free, 100 pieces, size M, 1221RMT
Anyone who spends many hours in a laboratory or in a care setting pipetting, decanting samples or handling delicate instruments will quickly realise whether a glove is helpful or more of a hindrance. Meditrade Gentle Skin Sensitive latex gloves are low-protein natural latex gloves designed specifically for this kind of fine motor work: powder-free, thin-walled and with a stretch that moulds closely to the hand without causing fatigue even when worn for hours on end. Available in sizes XS to XL, each pack containing 100 gloves. Low-protein thanks to a multi-stage processing method Natural latex naturally contains water-soluble proteins which can trigger skin reactions in sensitised individuals. The Sensitive range is therefore processed using a multi-stage washing process and additionally undergoes double chlorination, which reduces the protein content whilst also allowing the gloves to be put on easily without powder. This does not make the glove completely latex-free; it remains a natural rubber product containing natural rubber latex, sulphur, dithiocarbamate, zinc oxide, titanium dioxide, potassium hydroxide, calcium carbonate, polyacrylate and colour pigments. If you have a known Type 1 latex allergy, a nitrile glove from our range is therefore the safer choice. Gradual thickness variation from the palm to the fingertips According to the manufacturer’s data sheet, the thickness at the palm is at least 0.11 mm, and at the fingertips 0.13 mm (± 0.02 mm), slightly thicker to provide additional tactile sensitivity and mechanical strength precisely where the greatest stress occurs during gripping and pipetting. The force at break is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5 for the absence of holes in the batch. The textured, micro-roughened surface with a rolled cuff also ensures a secure grip, whether used dry or in contact with aqueous solutions. Class I medical device and PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves, as well as EN ISO 374-1, -2, -4 and -5 for protection against microorganisms, supplemented by EN 16523-1 for chemical permeation and EN ISO 21420:2020 as the basic standard for protective gloves in general. It is classified as a Class I medical device under Regulation (EU) 2017/745 and as Category III personal protective equipment under Regulation (EU) 2016/425, and is manufactured under a quality management system certified according to EN ISO 13485:2016. According to the data sheet, it is also suitable for contact with food, which is relevant, for example, for sample preparation in food analysis. Latex or nitrile: when it’s worth switching Natural latex offers high elasticity with low mechanical stress, which means the Gentle Skin Sensitive fits snugly to the hand and provides a particularly fine sense of touch. However, natural latex is less suitable for tasks involving non-polar solvents such as oils or fats, as the material can swell. In such cases, or where there is a known latex allergy, a nitrile glove from our range is the more appropriate choice, offering a comparable fit but greater chemical resistance. Selection guide: choosing the right size The size range extends from XS to XL and is based on the width of the hand, measured at the widest point excluding the thumb. A glove that is too tight causes the hand to tire more quickly when worn for long periods, whilst a glove that is too loose reduces both tactile sensitivity and a secure grip. SizeManufacturer’s item no.WidthLength XS1221RXST< 80 mmmin. 240 mm S1221RST80 mm (± 10 mm)min. 240 mm M1221RMT95 mm (± 10 mm)min. 240 mm L1221RLT110 mm (± 10 mm)min. 240 mm XL1221RXLT> 110 mmmin. 240 mm Differentiation within the Gentle Skin latex range Two other latex gloves from the same Meditrade range are available alongside the Gentle Skin Sensitive. Anyone who, in addition to a fine sense of touch, requires greater grip on damp or oily surfaces will find this in the textured Meditrade Gentle Skin Grip with its acrylic polymer coating. For day-to-day routine use without the protein-reduced processing of the Sensitive range, the Meditrade Gentle Skin compact+, with a comparable wall thickness, is an obvious alternative from the same product family. All three share the same basic construction made from natural latex with a rolled cuff and testing according to EN 455 and EN ISO 374-1, but differ in wall thickness, surface treatment and protein content. Those who wish to avoid natural latex altogether will find a latex-free alternative in our range of nitrile gloves. Use, storage, shelf life and disposal According to the manufacturer, the gloves are suitable for all areas where there is a risk of contamination, ranging from highly infectious situations in hospitals and doctors’ surgeries, through the care sector and laboratories, to the pharmaceutical industry, cleaning and industrial applications. According to the data sheet, the shelf life is 3 or 5 years, provided they are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile and intended for single use only; used gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the level of contamination. It is recommended that the gloves be changed at the latest upon the first visible sign of damage or soiling, even if the specified shelf life of 3 or 5 years has not yet been reached. Typical applications The low-protein formulation makes the Gentle Skin Sensitive particularly interesting where tactile sensitivity and skin compatibility have to come together: Sample preparation and pipetting tasks in the laboratory where dexterity is required Care and examination tasks involving frequent glove changes throughout a shift Food analysis and quality control, where the glove is suitable for food contact according to the data sheet Cleaning and routine tasks in the pharmaceutical industry and industrial settings For example, when pipetting a series of samples over several hours, the thin-walled material on the palm and fingertips can be utilised without the hand tiring prematurely, an advantage over thicker standard gloves. Assessing requirements correctly: from the pack to the carton Gentle Skin Sensitive is sold in packs of 100 per size. According to the manufacturer’s specifications, one carton contains 10 packs, i.e. 1,000 gloves, with a pallet comprising 56 cartons. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, a pack of 100 will last for around two working weeks; at 30 gloves per day, it will last for three to four working days. For businesses with multiple workstations or varying sizes, it is advisable to stock several packs of the appropriate size straight away, to ensure that no workstation runs out of a particular size. Frequently asked questions about Gentle Skin Sensitive Is the Gentle Skin Sensitive suitable for people with a latex allergy?No. The glove is low in protein but is still made from natural rubber latex. For those with a known Type 1 latex allergy, we recommend a nitrile glove from our range. Are the gloves sterile?No; according to the data sheet, they are non-sterile, single-use gloves. How thick is the glove on the palm and fingertips?The thickness is at least 0.11 mm on the palm and 0.13 mm (± 0.02 mm) on the fingertips. Is the glove suitable for contact with food?Yes, according to the data sheet, it is suitable for contact with food. What is the shelf life of the glove?3 or 5 years according to the data sheet, provided it is stored in a cool, dry place and protected from direct sunlight. Can I order individual gloves instead of the whole pack?No, the sales unit is a pack of 100 per size. Technical details MaterialNatural latex ColourNatural white SurfaceTextured, chlorinated, rolled cuff Lengthmin. 240 mm Thickness (palm)min. 0.11 mm Fingertip thickness0.13 mm ± 0.02 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces), 56 cartons per pallet FeaturesPowder-free, non-sterile, textured, rolled cuff, ambidextrous, suitable for food contact Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Gentle Skin Sensitive latex gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a sterile version or larger purchase quantities for your laboratory or practice? Our procurement service will be happy to support you with the suitable selection.
Meditrade Gentle Skin compact+ latex gloves, powder-free, 100 pcs., XS, 1221XSI
Where natural rubber latex is not an issue, its elasticity and comfort make it the first choice amongst disposable gloves for many users. Meditrade Gentle Skin compact+ latex gloves are powder-free, natural white, online-chlorinated for easy donning and doffing, and available in packs of 100 in sizes XS to XL. Natural rubber latex for high elasticity The glove is made from natural rubber latex with a textured surface and a rolled cuff. The online chlorination process reduces the material’s natural stickiness, making the glove easier to put on and take off than an untreated latex variant, even with slightly damp hands. The high inherent elasticity of natural rubber ensures a snug, second-skin fit, which many users prefer to nitrile for tasks requiring fine motor skills, as the glove adapts more directly to the shape of the hand. Thickness for delicate tasks According to the data sheet, the median thickness at the palm and fingertips is at least 0.11 mm in each case, with a median length of at least 240 mm. The width varies according to size: under 80 mm for XS, 80 mm (± 10 mm) for S, 95 mm (± 10 mm) for M, 110 mm (± 10 mm) for L and over 110 mm for XL. The force at break is at least 6 N (median), both before and after artificial ageing, tested with an AQL value of 1.5. Class I medical device and Category III PPE The Gentle Skin compact+ is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN ISO 374-1/-2/-4/-5 and EN ISO 21420:2020, and is manufactured under a quality management system certified according to EN ISO 13485:2016. Important note for those with a latex allergy As a natural rubber product, the glove contains dithiocarbamates (ZDC, ZDBC) according to the data sheet, for which there is a warning regarding possible allergic reactions. However, it is free from mercaptobenzothiazole and thiurams, two other common contact allergens used in rubber processing. Organisations with staff or customers known to have a latex allergy should switch to a nitrile-based alternative. Compact pack of 100 as a sales unit Unlike some nitrile variants in the range, which are sold in large cartons containing several thousand pieces, the price of Gentle Skin compact+ applies per handy pack of 100. It is ordered by the carton, at least 10 packs (1,000 pieces), then in steps of 10. Typical applications As a powder-free, highly elastic latex examination glove, the Gentle Skin compact+ is suitable for, amongst other things: Examination and care activities requiring a high degree of tactile sensitivity and dexterity Medical practices and clinics where there are no known cases of latex allergy amongst staff or patients Routine laboratory work where the high elasticity of natural rubber latex is preferred over nitrile Short-term tasks involving frequent glove changes, thanks to the compact pack of 100 For example, during examinations requiring fine motor skills, such as palpating small structures, the snug fit of natural rubber latex can be put to targeted use, whilst the compact pack size ensures that a fresh pack is always to hand, even for less frequent tasks, rather than having to keep a large carton in stock. In training situations too, where groups of trainees rotate, the 100-pack makes it easier to track consumption per group than with a large carton. Packaging: from individual pack to carton Gentle Skin compact+ is sold in packs of 100 pieces per size. According to the manufacturer, one carton holds 10 packs (1,000 pieces), with a pallet containing 54 cartons. The individual pack measures 120 x 215 x 70 mm, whilst the carton measures 245 x 360 x 225 mm, dimensions that aid storage planning in first-aid cupboards or stock rooms. Anyone looking for a powder-free latex alternative with a different grip surface will find it in the Gentle Skin Grip from the same product range. The entire latex range can be found under ‘Latex gloves’. Technical details MaterialNatural rubber latex ColourNatural white SurfaceTextured, rolled cuff, ambidextrous, online chlorinated PowderingPowder-free Lengthmin. 240 mm (median) Width by sizeXS < 80 mm, S 80 ± 10 mm, M 95 ± 10 mm, L 110 ± 10 mm, XL > 110 mm Thickness (palm/fingertip)min. 0.11 mm (median) Force at break (before/after ageing)min. 6 N (median) AQL1.5 Packaging100 pieces per pack (120 x 215 x 70 mm), 10 packs per carton (245 x 360 x 225 mm), 54 cartons per pallet Medical device classClass I (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN ISO 21420:2020, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Gentle Skin compact+ latex gloves (size as per variant selection). Can only be ordered by the carton: at least 10 packs (1 carton), then in steps of 10. Individual requirements and procurement service Do you require larger purchase quantities, a different variant from the Gentle Skin range, or advice on latex tolerance within your team? Our procurement service will be happy to support you with the suitable selection.
Meditrade Nitril Viola Nitrile Examination and Protective Gloves, Purple, Powder-free, Size M, 1285M
As well as black, white and blue, a bold colour such as violet often ensures the quickest recognition in day-to-day work, whether at a specific station, in a particular treatment room or simply to stand out visually from other glove colours. Meditrade Nitril Viola nitrile examination and protective gloves are powder-free, latex-free, disposable nitrile gloves in violet, available in sizes XS to XL, sold in cartons of 1,000 (10 packs of 100). Latex-free with an additional polymer coating The glove is made from nitrile butadiene rubber (NBR) containing the following ingredients: antioxidant, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide, potassium hydroxide and colour pigment, supplemented by an additional polymer coating. It is free from mercaptobenzothiazole and thiurams. Thickness from the cuff to the fingertip According to the data sheet, the thickness at the cuff is 0.05 mm (± 0.02 mm), at the palm 0.07 mm (± 0.02 mm) and at the fingertip 0.10 mm (± 0.02 mm), the same gradation as for the other colours in the nitrile range. The force at break is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5. The effect of the additional polymer coating According to the list of ingredients, the Nitril Viola has an additional polymer coating. In nitrile gloves, such a surface coating is usually intended to make the gloves easier to put on and to influence surface friction without altering the thickness of the underlying material. As regards the barrier performance itself, the key parameters such as thickness, force at break and AQL remain identical to those of the other colours in the range. Class I medical device and Category III PPE The Nitril Viola is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN 374-1, -2, -4 and -5, EN 16523-1 for chemical permeation, EN ISO 21420 and ASTM F 1671 (ISO 16604) for the penetration of blood-borne pathogens, and is manufactured under a quality management system certified according to EN ISO 13485:2016. Selection guide: choosing the right size Sizes range from XS to XL, with widths from under 80 mm for XS to over 110 mm for XL. SizeManufacturer’s item no.WidthLength XS1285XS< 80 mmmin. 240 mm S1285S80 mm (± 10 mm)min. 240 mm M1285M95 mm (± 10 mm)min. 240 mm L1285L110 mm (± 10 mm)min. 240 mm XL1285XL> 110 mmmin. 240 mm Differentiation within the nitrile range Within our Meditrade nitrile range, the Nitril Viola shares the same thickness grades as the white Meditrade Nitril 3000 and the black Meditrade Nitril Black, but differs through its additional polymer coating and the ASTM F 1671 testing for protection against blood-borne pathogens. Those requiring an even wider range of sizes up to XXL will find this in the Meditrade Nitril NextGen. For organisations that also prioritise biodegradability, the Meditrade Nitril GreenGen offers a green variant that has been tested according to ASTM D5526 and D5511. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use. After use, the gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the level of contamination. Typical applications The violet colour is suitable wherever a clear visual distinction from other glove colours is required: Facilities with multiple colours of nitrile gloves, where violet is specifically allocated to a particular station or shift Examination and care activities with additional requirements for barrier protection against blood-borne pathogens Laboratory and routine tasks where a latex-free, visually distinctive glove is required Training and educational settings where a striking colour is intended to draw attention specifically to a particular exercise or station For example, in a workplace using several colours from the nitrile range, it is possible to see at a glance which station or shift is currently working with the violet colour, without the colour presenting any technical disadvantages. The additional ASTM F 1671 test also makes the colour suitable for areas with an increased risk of exposure, where a higher level of barrier protection is required anyway. Violet as part of a wider colour family Violet is also available in the Unigloves Pearl range. Anyone already working with a colour-coded system should therefore decide in advance whether violet should be used within the nitrile family or as a standalone colour across multiple glove types, in order to avoid confusion between different material qualities. As latex and nitrile gloves have different protective properties and allergy risks, a single colour should not be used to represent both material groups simultaneously without clear internal guidelines. Assessing requirements correctly: from the carton to the rotation routine Nitril Viola is sold exclusively in cartons containing 1,000 gloves per size, divided into 10 packs of 100 each, which can be made available independently at different workstations without opening the entire carton. A simple rough calculation helps with demand planning: assuming a consumption of 10 gloves per workstation per day, a pack of 100 covers around two working weeks, whilst the whole carton covers around 20 working weeks. If consumption is higher, at 30 gloves per workstation per day, one pack will last for around three to four working days, whilst the carton will last for a good six to seven working weeks. For businesses with multiple workstations, the same calculation can be multiplied by the number of workstations to roughly estimate requirements for a specific period. Individual packs cannot be selected separately during the ordering process, even though they can be opened and used independently of one another in the workplace. Frequently asked questions about Nitril Viola Are Nitril Viola gloves latex-free?Yes, according to the data sheet the glove is latex-free. It is made of nitrile butadiene rubber (NBR) with an additional polymer coating. What is the glove’s medical device class and PPE category?Medical device Class I in accordance with Regulation (EU) 2017/745 and Personal Protective Equipment Category III in accordance with Regulation (EU) 2016/425. How thick is the glove?The thickness is 0.05 mm on the cuff, 0.07 mm on the palm and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case. Has the glove been tested against blood-borne pathogens?Yes. According to the data sheet, it was tested according to ASTM F 1671 (ISO 16604). Are the gloves sterile?No, they are non-sterile, single-use gloves. Can I order a single pack of 100 instead of the whole carton?No, the product is sold exclusively in cartons containing 1,000 pieces per size (10 packs of 100 pieces each). What distinguishes the polymer coating from the other nitrile colours?It primarily affects the surface properties; the core specifications such as thickness and force at break remain identical to those of the other colours. Technical details MaterialNitrile butadiene rubber (NBR) with polymer coating ColourViolet SurfaceMicro-roughened, rolled cuff Lengthmin. 240 mm Thickness (palm)0.07 mm ± 0.02 mm Thickness (fingertip)0.10 mm ± 0.02 mm Thickness (cuff)0.05 mm ± 0.02 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces in total) FeaturesPowder-free, latex-free, non-sterile, ambidextrous, free from mercaptobenzothiazole and thiurams Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420, ASTM F 1671 (ISO 16604), EN ISO 13485:2016 Scope of delivery 1 carton = 10 packs of 100 pieces each = 1,000 pieces of Meditrade Nitril Viola nitrile examination and protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities or a different colour from the Meditrade nitrile range for your colour-coding? Our procurement service will be happy to assist you in making a suitable selection.
Content: 1000 piece(s) (€3.90 / 100 piece(s))
Unicare Black Latex, Latex gloves, Black, Powder-free, 1,000 pieces (10 x 100 pieces) - S, GS2902
Unigloves Unicare Black Latex gloves are the only latex option in this colour range and therefore differ fundamentally from the nitrile gloves in the Pearl range: they are made from natural latex rather than nitrile and are therefore not latex-free. Unicare is Unigloves’ basic range. The gloves are powder-free, with a micro-textured palm for a secure grip and a rolled cuff. Unicare Black Latex gloves are sold in a carton containing 1,000 pieces (10 boxes of 100 pieces each), in four sizes from S to XL, excluding size XS. Natural latex instead of nitrile: greater thickness, but allergy warning As a natural latex glove, Unicare Black Latex is 0.11 mm (± 0.02 mm) thick on the palm and 0.12 mm (± 0.02 mm) at the fingertips, thicker than the nitrile gloves in the Pearl range, which results in a more robust feel. As natural latex contains the allergen natural rubber latex, this glove is not suitable for people with a known latex allergy (Type I); in such cases, a nitrile glove from the Pearl range is a suitable latex-free alternative. The median force at break is at least 6.0 N both before and after artificial ageing, whilst the AQL value in the watertightness test is 1.5. Chemical protection according to EN 374, Category III, Type B Unicare Black Latex is tested according to EN 374, Category III, Type B; this is a different protection class to the Type C classification of the nitrile Pearl gloves in this range. In addition, the glove provides protection against viruses according to EN ISO 374-5. It complies with EN 455 (Parts 1 to 4) for medical disposable gloves as well as EN ISO 21420, and is manufactured under a quality management system certified according to EN ISO 13485:2016. As personal protective equipment, the glove is classified in PPE Category III. Information on food contact suitability and specific permeation values for individual chemicals is available on request. Typical applications Unicare Black Latex is suitable for applications where the elasticity of natural latex is valued and there are no known latex allergies amongst staff: Applications where the high elasticity of natural latex is preferred over nitrile, for example for work requiring a particularly precise fit Cleaning and disinfection tasks within the scope of the tested EN 374 Category III, Type B Businesses that specifically use black as a contrasting colour to improve the visibility of light-coloured residues Areas of use where there are no known latex allergies amongst staff As this is a natural latex glove, it is worth briefly checking with the team before ordering to see if there are any known latex allergies. If this is the case, the Black Pearl from the nitrile range offers a colour-matched, latex-free alternative. Packaging for ongoing requirements The carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, is suitable for businesses with regular consumption, such as cleaning services, workshops or medical practices with multiple workstations. The individual boxes of 100 can be placed at different workstations independently of one another without having to open the entire carton, which keeps the remaining boxes sealed and ready to hand for longer. Unicare in the Unigloves range Unicare is Unigloves’ basic range, comprising latex gloves for everyday use. Anyone looking for a latex alternative with a different product focus will find it in the Select Black range, also black and powder-free, from another Unigloves product line. For latex-free applications, a nitrile glove from the Pearl range is a suitable alternative, such as the colour-coordinated Black Pearl. Technical details MaterialNatural latex ColourBlack Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Thickness (palm)0.11 mm (± 0.02 mm) Thickness at fingertip0.12 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 CharacteristicsPowder-free, micro-textured palm, rolled cuff StandardsEN ISO 21420, EN 455 (Parts 1-4), EN 374 (Category III, Type B), EN ISO 374-5 Quality management systemEN ISO 13485:2016 PPE categoryIII (EU Regulation 2016/425) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Unicare Black Latex gloves (size as per variant selection, available in S to XL) Individual requirements and procurement service Do you require a different size, a latex-free alternative from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€6.10 / 100 piece(s))
Unigloves Select Black 300 Latex Gloves, black, extra-long, powder-free, size M, 24303
Long tattoo sessions and kitchen work involving frequent contact with washing-up water have one thing in common: if the cuff is too short, liquid can quickly seep into the glove at the wrist. Unigloves has developed the Select Black 300 specifically for this scenario, described by the manufacturer itself as ‘Der lange Kreative’, the extended version of the black disposable latex glove, the Select Black. With a cuff length of 295 mm (± 5 mm), around 55 mm longer than the standard version, it provides additional protection for the wrist and part of the forearm. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Extended cuff and good-grip, chlorinated surface The name derives from the length: the technical data sheet specifies 295 ± 5 mm for size XS, and at least 295 ± 5 mm for sizes S to XL; the model designation ‘300’ rounds off this figure. At 0.16 ± 0.03 mm, the palm is noticeably thicker than on the standard Select Black version (0.11 mm), which provides additional durability during prolonged contact with water or cleaning agents; the same applies to the fingertips, which measure 0.16 ± 0.03 mm. The cuff itself is also documented as being 0.11 ± 0.02 mm thick, a measurement for which no value is given in the data sheet for the shorter Select Black version. The surface is micro-textured on the fingertips and palm for a secure grip and chlorinated on the outside to make it easier to put on and take off. According to the manufacturer, the glove is also touchscreen-compatible, allowing smartphones or tablets to be operated without removing the gloves, for example for documentation between two work steps. Chemical protection according to EN 374, Category III, Type B, with three tested chemicals Select Black 300 shares the chemical resistance profile of the short version: classified according to EN ISO 374-1 in Category III, Type B, with additional protection against viruses, fungi and bacteria according to EN ISO 374-5. Three test chemicals are specified with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation rate of minus 55.11 %, 30 % hydrogen peroxide with a level of 2 and a degradation rate of plus 9.7 %, and 37 % formaldehyde with a level of 2 and a degradation rate of minus 12.4 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies. Tested according to EN 455, PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. In the 1,000 ml water-tightness test, the glove achieves a high level of impermeability with an AQL value of 1.5; it is also food-safe. The data sheet does not specify a particular medical device class. Choosing the right size With Select Black 300, too, the manufacturer assigns a numerical glove size to each standard size, ranging from 5 to 6 for XS to 9 to 10 for XL, identical to the short Select Black version. SizeManufacturer’s item no.Glove sizeWidthLength XS243015-675 mm (± 5 mm)295 mm (± 5 mm) S243026-780 mm (± 10 mm)≥ 295 mm (± 5 mm) M243037-895 mm (± 10 mm)≥ 295 mm (± 5 mm) L243048-9110 mm (± 10 mm)≥ 295 mm (± 5 mm) XL243059-10≥ 110 mm≥ 295 mm (± 5 mm) Select Black 300 or Select Black: which length is right for you? Select Black 300 and the short Select Black share the same colour, chemical resistance profile and certification, but differ significantly in length and material thickness. For standard applications in the laboratory or at the treatment station, the short version with a cuff length of around 240 mm is sufficient. As soon as splash water, cleaning agents or frequent contact with liquids occur at the wrist, such as when washing up in a catering kitchen or during long tattoo sessions involving frequent hand contact with ink and disinfectant, the 300 version offers more robust protection with its cuff that is around 55 mm longer and its thicker palm. For those with a natural latex allergy, a nitrile glove such as Black Pearl from the nitrile glove range is the suitable alternative to both Select Black variants. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The extended cuff of the Select Black 300 makes a practical difference above all in these areas of use: Tattoo and piercing studios during long sessions involving repeated contact with ink, disinfectants and skin contact surfaces Catering and food processing, particularly when washing up and carrying out cleaning tasks involving splashing water on the wrist (food contact suitability according to the manufacturer) Laboratory work with an increased risk of splashes, where the extra cuff length offers a clear advantage over standard gloves Where the standard length is sufficient, the short Select Black is the more economical choice; see the distinction above. Assessing requirements correctly: from the carton to the shift The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently at different workstations. In a catering kitchen with an estimated consumption of 15 gloves per dishwashing staff member per shift, one box of 100 covers around 6 to 7 shifts; a whole carton therefore covers around 65 shifts. In a tattoo studio, assuming 3 to 5 pairs of gloves per longer session (changed during breaks), one box of 50 pairs is sufficient for around 10 to 16 sessions, whilst a full carton covers 100 to 165 sessions. These are sold exclusively as whole cartons; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton How long is the cuff really, 295 or 300 mm?According to the data sheet, it measures 295 mm (± 5 mm); the model designation ‘300’ is the manufacturer’s rounded marketing figure. Who did Unigloves develop this glove for?Under the name suffix ‘Der lange Kreative’, the manufacturer explicitly lists tattoo artists, as well as the catering and food processing sectors, as the target groups for the extended cuff. Is Select Black 300 suitable for people with a latex allergy?No, the glove is made of natural latex. If you have a known natural latex allergy, a nitrile glove such as Black Pearl is suitable. How resistant is the glove to chemicals?Three test chemicals are listed with numerical values: 40 % caustic soda (Level 6, minus 55.11 %), hydrogen peroxide 30 % (Level 2, plus 9.7 %) and formaldehyde 37 % (Level 2, minus 12.4 %), identical to the short Select Black version. How does the Select Black 300 differ from the short Select Black?Primarily in length (295 mm instead of 240 mm) and material thickness (0.16 mm instead of 0.11 mm on the palm). The colour, certification and chemical resistance profile are identical. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Technical details MaterialLatex (natural rubber) ColourBlack, matt Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length295 mm (± 5 mm), size XS 295 mm, sizes S to XL at least 295 mm Width per sizeXS 75 mm (± 5 mm), S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL ≥ 110 mm Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palm0.16 ± 0.03 mm Fingertip thickness0.16 ± 0.03 mm Cuff thickness0.11 ± 0.02 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)40 % caustic soda, Level 6 (-55.11 %), 30 % hydrogen peroxide, Level 2 (+9.7 %), 37 % formaldehyde, Level 2 (-12.4 %) PropertiesPowder-free, thiuram-free, micro-textured, chlorinated, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type B), EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Select Black 300 latex gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, the short Select Black for standard applications, or a latex-free nitrile alternative from the Unigloves Pearl range for your studio or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€10.10 / 100 piece(s))
Unigloves Green Pearl Nitrile Gloves, Green, Powder-free, Size M, GP0043
Anyone who works in a workplace where several Pearl colours are used will be familiar with the problem: at first glance, every colour looks similar, but not every data sheet is equally comprehensive. With Unigloves Green Pearl nitrile gloves, you can check this straight away, as green is one of the few colours in the Pearl range for which the manufacturer specifies all three material thickness measurement points, the palm, fingertips and cuff, individually, rather than just one. These low-powder, latex-free gloves, made from fully dipped nitrile, feature textured fingertips for a secure grip and a rolled cuff that makes them easier to put on. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Low-powder rather than powder-free: a departure from the other Pearl colours Unlike most colours in the Pearl range, which are marketed as powder-free, the Green Pearl data sheet states a powder residue of less than 2 mg per glove and describes the product as ‘low-powder’, not powder-free. For most applications, this difference has no practical significance; however, for businesses with strict powder-avoidance policies, such as in cleanrooms, it is worth checking this specification before ordering. According to the data sheet, the glove is nevertheless latex-free and protein-free; however, unlike the other Pearl colours in our range, there is no indication that it is thiuram-free in the specification list. The material thickness is documented at all three measurement points: palm at least 0.06 mm, fingertips at least 0.08 mm, cuff at least 0.05 mm, each measured as a single layer. The median force at break is at least 6.0 N both before and after artificial ageing. Chemical protection according to EN 374, Category III, Type C Green Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C. Against 40 % sodium hydroxide solution, a permeation level of 6 was determined according to EN 374-4, with a degradation rate of minus 78.9 %, significantly higher than for most other Pearl colours, which are predominantly around minus 5.3 %. Both values achieve the same permeation level 6; the difference lies solely in the degradation rate. For other chemicals, the manufacturer’s product-specific chemical resistance table applies. Tested according to EN 455 Green Pearl complies with EN 455 (Parts 1 to 4) for single-use medical gloves. The type examination according to Modules B and C2 of the PPE Regulation (EU) 2016/425 was carried out by CCQS Certification Services Limited (No. 2834), and production is certified to DIN EN ISO 13485. According to the data sheet, the glove is classified as personal protective equipment in Category III (EN 374 CAT III, Type C). An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer. Choosing the right size The manufacturer also assigns a numerical glove size to each Green Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00415-6≥ 80 mm≥ 240 mm SGP00426-780 mm (± 10 mm)≥ 240 mm MGP00437-895 mm (± 10 mm)≥ 240 mm LGP00448-9110 mm (± 10 mm)≥ 240 mm XLGP00459-10≥ 110 mm≥ 240 mm Green in the twelve-colour Pearl range Green Pearl is one of twelve colours in the Unigloves Pearl range available from us. Those looking for a dark contrasting colour for cleanliness checks will find it in Black Pearl, whilst those preferring a similarly cool but completely powder-free colour will find it in Cobalt Pearl or the classic Blue Pearl. All colours share the same basic construction of fully-dipped nitrile with textured fingertips and a rolled cuff; however, according to their respective data sheets, they differ in details such as powdering and material thickness. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The green colour is suitable for work areas that are to be distinguished from other workstations in the colour-coding system: Laboratories and doctors’ surgeries that use green as the standard colour for general examinations and laboratory work Food processing (food-safe according to the manufacturer) Businesses using multiple Unigloves Pearl colours, where green is specifically used as a base colour alongside more striking signal colours for specialised areas Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III This means that in a facility with colour-coded workstations, it is immediately clear at a glance which work area uses green, whilst other colours from the Pearl range are reserved for exceptions or special processes. Assessing requirements correctly: from the carton to the change routine The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. A rough calculation can help with demand planning for a workstation using green gloves throughout: assuming a consumption of 12 gloves per workstation per day, one box of 100 pieces covers around 8 working days, whilst a whole carton covers approximately 16 weeks. Where there are several workstations with the same colour code, this calculation can be multiplied by the number of workstations to estimate the total requirement for a specific period and to reorder in good time. Sales are exclusively by the full carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Is Green Pearl powder-free?Not quite; the data sheet lists the product as low-powder, with a powder residue of less than 2 mg per glove, rather than powder-free like most other Pearl colours. Which notified body is stated for the glove?According to the manufacturer, the notified body is CCQS Certification Services Limited (No. 2834). How resistant is the glove to chemicals?Against 40 % caustic soda, permeation level 6 was determined with a degradation of minus 78.9 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. Are the palm, fingertips and cuff fully documented for Green Pearl?Yes, Green Pearl is one of the few Pearl colours for which all three measurement points are specified with values in the data sheet: palm at least 0.06 mm, fingertips at least 0.08 mm, cuff at least 0.05 mm. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourGreen Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS ≥ 80 mm, S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL ≥ 110 mm Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness (palm)min. 0.06 mm Fingertip thicknessmin. 0.08 mm Cuff thicknessmin. 0.05 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -78.9 % PropertiesLow-powder (< 2 mg/glove), latex-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420:2020, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4 PPE CategoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS Certification Services Limited (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Green Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Meditrade Nitrile GreenGen Examination Gloves, green, carton (1,000 pieces), L, 1293L
At a time when procurement guidelines are increasingly taking the environmental footprint of consumables into account, Meditrade’s Nitril GreenGen examination gloves offer a viable option without compromising on protection or ease of use. The powder-free, disposable glove comes in a striking green colour; according to the manufacturer, it has been tested for biodegradability and is available in cartons of 1,000 in sizes XS to XL. Biodegradable according to the ASTM standard Disposable gloves are disposed of in large quantities after use, a factor that is now taken into account in procurement decisions at many businesses. According to the manufacturer, the GreenGen nitrile glove has been tested for biodegradability according to ASTM D5526 (accelerated degradation test under landfill conditions) and ASTM D5511 (anaerobic digestion). For organisations that are increasingly aligning their procurement with sustainability criteria, this provides a documented basis that goes beyond a mere marketing claim, without requiring any compromise on the standard testing criteria for examination gloves. Thickness from the palm to the fingertips According to the data sheet, the median thickness at the palm is 0.07 mm (± 0.02 mm) and at the fingertips 0.09 mm (± 0.02 mm), with a median length of at least 240 mm. The slightly greater thickness at the fingertips takes into account the greater mechanical stress involved in gripping and feeling. The batch is tested using an AQL value of 1.5, the sampling inspection level commonly used in the glove industry for the statistical defect rate per batch. This means that GreenGen’s key performance indicators are on a par with those typically found in conventional nitrile examination gloves that have not been tested for biodegradability. Green as the identifying colour in the nitrile range Unlike the neutral, blue or black versions in the rest of the Meditrade nitrile range, GreenGen is coloured in a striking green, which, according to the manufacturer, is derived from a copper phthalocyanine green pigment. Businesses that use colour-coding to distinguish between different workstations or process stages can make targeted use of this colour as a distinguishing feature, for example, to visually set the GreenGen variant apart from the standard product without the need for additional labelling. Powder-free for less residue GreenGen is powder-free, so no powder residue is left on workpieces, samples or foodstuffs when the glove is removed. This is particularly important where residues could compromise sample quality or where powder particles are undesirable in the immediate vicinity of foodstuffs. The data sheet also lists EN ISO 10993 (biological evaluation of medical devices) among its standards. Five sizes, each with its own item number We offer the GreenGen in sizes XS, S, M, L and XL, with each size having its own manufacturer’s item number and its own EAN. This makes it easier to reorder individual sizes without any mix-ups between sizes during the ordering process, particularly when several sizes are in use simultaneously across different departments within the same organisation. Typical applications As a powder-free nitrile glove with documented biodegradability, GreenGen is suitable for, amongst other things: Laboratory procedures and sample processing in organisations with sustainability requirements in their procurement policies Catering and food processing, as the glove is food-safe according to the data sheet Examination and care activities involving high daily consumption Businesses that wish to distinguish between different types of nitrile gloves by colour This means that the daily use of disposable gloves when dealing with customers or auditors can be substantiated by a verifiable testing standard, rather than relying on an unsubstantiated sustainability claim, an argument that is increasingly sought after in tenders with environmental criteria. In training, too, the example of GreenGen clearly demonstrates how environmental testing standards and the protective function of a disposable glove can be reconciled. Standards, testing and packaging GreenGen complies with EN 455 (Parts 1 to 4) for examination gloves and with EN ISO 10993 for the biocompatibility of the material. It is sold in cartons of 1,000, divided into sizes XS to XL, each with its own item number. Anyone who requires tested resistance to chemicals and cytostatic agents in addition to biodegradability will find this in the Nitril X-Long from the same range. An overview of the entire range of materials is provided by the category Nitrile gloves. Technical details MaterialNitrile ColourGreen (copper phthalocyanine green pigment) PowderingPowder-free Lengthat least 240 mm (median) Thickness (palm)0.07 mm ± 0.02 mm (median) Thickness (fingertip)0.09 mm ± 0.02 mm (median) AQL1.5 PackagingCarton of 1,000 FeaturesPowder-free, food-safe according to the data sheet StandardsEN 455-1/-2/-3/-4, EN ISO 10993, ASTM D5526, ASTM D5511 (biodegradability) Scope of delivery 1 carton = 1,000 Meditrade Nitril GreenGen examination gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities, a different colour from the Meditrade nitrile range, or a version with additional chemical resistance? Our procurement service will be happy to help you choose the right product.
Content: 1000 piece(s) (€4.90 / 100 piece(s))
Unigloves Black Pearl Nitrile Gloves, Black, Powder-free, Size M, GP0033
In a laboratory with several workstations or in a workplace with different work areas, a consistent colour-coding system helps to prevent mix-ups. Black nitrile gloves such as the Unigloves Black Pearl fulfil this function without compromising on protection or classification. These powder-free, latex-free gloves, made from fully dipped nitrile, feature textured fingertips for a secure grip during wet or oily tasks and a rolled cuff that makes them easier to put on. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Black Pearl range is completely latex-free and, according to the manufacturer, also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). The median force at break is at least 6.0 N both before and after artificial ageing, whilst the palm has a thickness of at least 0.05 mm, measured as a single layer in the centre of the palm according to the data sheet. Nitrile gloves with chemical protection according to EN 374, Category III, Type C The glove is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, the highest protection category specified by the standard, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, which corresponds to the highest level on the scale, with a degradation rate of minus 5.3 %. For work involving other chemicals, it is worth consulting the manufacturer’s product-specific chemical resistance table in advance, as the data sheet only lists this one test chemical with numerical values. Tested according to EN 455, PPE Category III The Black Pearl gloves comply with EN 455 (Parts 1 to 4) for medical single-use gloves and are manufactured under a quality management system certified to DIN EN ISO 13485:2021. As personal protective equipment, they are classified in Category III, the highest PPE category for gloves involving complex risks, with type examination according to Modules B and C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834). In the 1,000 ml water tightness test, they demonstrate a high level of impermeability with an AQL value of 1.5. Furthermore, they are food-safe; however, the data sheet does not specify a particular regulation in this regard. Choosing the right size With nitrile gloves, the fit determines tactile sensitivity and safety: if they are too tight, they are difficult to put on and restrict dexterity; if they are too loose, they reduce grip and may slip whilst working. The manufacturer also assigns a numerical glove size to each Black Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. These numbers follow the standard sizing system used in EN ISO 21420, one of the standards against which the Black Pearl is tested, and are based on hand circumference in inches, measured at the widest point of the hand excluding the thumb. If you already know your glove size from other PPE gloves, you can use that directly; alternatively, you can refer to the specified width in millimetres. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00315-675 mm (± 5 mm)≥ 240 mm SGP00326-785 mm (± 5 mm)≥ 240 mm MGP00337-895 mm (± 5 mm)≥ 240 mm LGP00348-9105 mm (± 5 mm)≥ 240 mm XLGP00359-10120 mm (± 10 mm)≥ 240 mm Black in the twelve-colour Pearl range Black Pearl is one of twelve colours in the Unigloves Pearl range available from us: Blue Pearl, Cobalt Pearl, Yellow Pearl, Green Pearl, Violet Pearl, Magenta Pearl and Mint Pearl, through to Opal Pearl, Orange Pearl and Pink Pearl, and finally Red Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips, a rolled cuff and classification according to EN ISO 374-1 Category III Type C; however, according to the respective data sheets, they differ slightly in details such as the thickness of the palm and the width per size, varying between approximately 0.05 mm and 0.09 mm depending on the colour. For exact values for any other colour, please refer to the relevant product-specific data sheet. Black is particularly suitable where contrast is important: light-coloured powder residues, crystals or foreign particles are easier to spot on a dark surface than on a light-coloured glove, and in the tattoo and cosmetics industries, black has now become an established part of the look. In a workplace using several Pearl colours, black can also be used specifically for colour-coding, for example, to clearly distinguish a workstation, a process step or a shift from the other colours, without any one colour being at a technical disadvantage. Use, storage and disposal We can provide storage conditions and shelf life on request. Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Nitrile gloves such as the Black Pearl are usually changed for each task or process step, or at the latest at the first visible sign of damage, soiling or contact with chemicals outside the tested application. After use, they are generally disposed of as commercial waste, whilst contaminated gloves are disposed of separately in accordance with internal hazardous substances regulations. Typical applications The dark colour makes the Black Pearl an obvious choice wherever contrast or a uniform appearance is required: Tattoo and beauty salons, where black has now become an established colour Laboratories and food processing, where light-coloured powder residues, crystals or foreign particles are more visible on dark gloves than on light-coloured ones Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III Businesses using multiple Unigloves Pearl colours, where black is specifically used for colour-coding individual workstations, shifts or process steps For example, in a laboratory with several Pearl colours, it is possible to see at a glance which workstation is currently using black, whilst in a tattoo or beauty salon, the same colour primarily ensures a consistent, professional appearance. Assessing requirements correctly: from the carton to the change routine The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available at different workstations independently of one another, without having to open the entire carton. A simple rough calculation based on estimated consumption figures helps with demand planning: at a rate of 10 gloves per workstation per day, a box of 100 covers around two working weeks, whilst a whole carton covers around 20 working weeks. If consumption is higher, at 30 gloves per workstation per day, one box will last for around three to four working days and a carton for a good six to seven working weeks. For businesses with multiple workstations, the same calculation can be multiplied by the number of workstations to roughly estimate the requirement for a specific period and reorder in good time. Sales are exclusively by the full carton; a single box of 100 cannot be selected separately during the ordering process, even though the boxes can be opened and used independently of one another in the workplace. Frequently asked questions about the 1,000-piece carton Is Black Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant are the gloves to chemicals?The data sheet lists a test chemical with numerical values: 40 % sodium hydroxide solution with a permeation level of 6 and a degradation rate of -5.3 %. A breakthrough time in minutes is not specified in the data sheet; only the permeation level is given. For other chemicals, it is advisable to consult the manufacturer in advance. Are the Black Pearl gloves sterile?No, according to the data sheet, they are non-sterile, single-use gloves. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Do other Pearl colours differ technically from Black Pearl?Slightly: the thickness of the palm and the width per size vary between colour variants as shown in the data sheets. For exact specifications of a different colour, please refer to the relevant product-specific data sheet. Technical details MaterialNitrile, fully dipped ColourBlack Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palmmin. 0.05 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Black Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.75 / 100 piece(s))
Meditrade Nitrile StellarGrip Black Protective Gloves, box of 500 (10 boxes of 50), PPE Class III, M, 1292M
Whether in the workshop or on a maintenance call-out, any light-coloured glove will soon show signs of oil and dirt. Meditrade Nitril StellarGrip protective gloves in black are industrial protective gloves with a diamond-patterned texture on both sides for a secure grip; they are powder-free and available in cartons of 500 in sizes S to XXL. Black: a practical colour for work The dark colour is no coincidence in commercial use: traces of oil, grease and dirt are much less noticeable on black than on light-coloured examination gloves, such as those commonly used in laboratories or medical practices. For tasks where the glove regularly comes into contact with dirt anyway, this is a purely practical advantage, without compromising the protective function itself. Diamond pattern for a secure grip The surface features a diamond pattern on both sides. This improves grip when handling oily or slippery workpieces, for example, during assembly, on machinery or when handling metal parts, and works regardless of which side of the glove is currently being used. Particularly for tasks where the glove is frequently turned over or used at varying grip angles, the double-sided texture saves the need for extra hand movements. Thickness designed for everyday workshop use With a thickness of at least 0.18 mm on the palm and fingertips, and at least 0.10 mm on the cuff, the StellarGrip is significantly more robust than a thin disposable examination glove. Weighing 8.5 g (± 0.5 g) per glove and with a force at break of 11 N both before and after artificial ageing, it is designed for use several times a day in workshops, warehouses or on assembly lines without making the handling of small parts unnecessarily difficult. Significantly thicker than a disposable examination glove By way of comparison: a standard nitrile examination glove used in laboratories is usually around 0.07 to 0.12 mm thick. With a thickness of at least 0.18 mm on the palm and fingertips, the StellarGrip is designed to be significantly sturdier, a deliberate distinction between a disposable medical glove intended for brief contact tasks and an industrial protective glove designed to withstand mechanical stress over extended periods. PPE Category III for industrial use The StellarGrip is classified as Category III Personal Protective Equipment in accordance with Regulation (EU) 2016/425 and complies with EN 374 and EN ISO 21420. It is manufactured under a quality management system certified according to EN ISO 13485:2016. The glove is positioned as an industrial protective glove; there is no documentation classifying this product as a medical device, which is generally not required for its intended industrial use. Sizes from S to XXL Unlike the examination gloves in the rest of the Meditrade range, which usually start at XS, the StellarGrip covers sizes S, M, L, XL and XXL. This meets the wider range of size requirements in industrial settings, where larger hand circumferences are more common than in laboratories or medical practices. Each size has its own manufacturer’s item number and its own EAN, so that individual sizes can be reordered as required. Typical applications As a robust nitrile protective glove with a diamond pattern, the StellarGrip Black is suitable for, amongst other things: Workshop and automotive work involving regular contact with oil and grease Warehouse, logistics and assembly work involving increased wear and tear on the gloves Maintenance and repair work where dark soiling is virtually unavoidable Industrial and commercial enterprises requiring a more robust nitrile glove than disposable examination gloves For example, in a vehicle workshop, the same glove can be worn for an entire shift without visible soiling forcing a premature change, an advantage over light-coloured disposable gloves, which look unsightly after only a short time. Even when inspecting oily or dusty components on receipt, handling remains secure thanks to the diamond pattern, even when the glove surface itself is already soiled. Colour options in the StellarGrip range Those who prefer a highly visible glove colour for tasks with increased safety requirements will find the identical design in StellarGrip Orange. Both colours share the same material, diamond pattern and thickness; they differ only in colour. The complete nitrile range can be browsed in the Nitrile Gloves category. Technical details MaterialNitrile ColourBlack SurfaceDiamond pattern on both sides PowderingPowder-free Thickness (palm/fingertip)min. 0.18 mm Cuff thicknessmin. 0.10 mm Weight per glove8.5 g ± 0.5 g Force at break (before/after ageing)11 N PPE CategoryIII (Regulation (EU) 2016/425) Packaging500 pieces per carton (10 boxes of 50) StandardsEN 374, EN ISO 21420, EN ISO 13485:2016 Scope of delivery 1 carton = 500 Meditrade Nitril StellarGrip Black protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger purchase quantities, the second colour from the StellarGrip range, or assistance in selecting the right protective gloves for your workplace? Our procurement service will be happy to support you with the suitable selection.
Content: 500 piece(s) (€7.18 / 100 piece(s))
Unigloves Select Black Latex Gloves, black, powder-free (sizes XS to XL), M, GT2403
Anyone who works with their hands all day, whether at the tattoo chair, in the laboratory or in the kitchen, needs a glove that doesn’t compromise tactile sensitivity and grip for the sake of safety. The manufacturer specifically markets the Unigloves Select Black latex gloves, under the name suffix ‘Der Kreative’ (The Creative One), for tattoo artists and other precision trades where dexterity is crucial to the quality of the work. Unlike the nitrile gloves in the Pearl range, Select Black is made from natural latex with micro-textured fingertips and palms for extra grip, a rolled cuff and a matt black finish. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Latex instead of nitrile: greater elasticity, a different situation regarding allergies Natural latex moulds more closely to the hand than nitrile and is therefore perceived by many users as more comfortable during prolonged wear, one reason why Unigloves specifically targets this range at tattoo artists who work for hours on end. According to the data sheet, the palm has a thickness of 0.11 ± 0.03 mm, and the fingertips 0.13 ± 0.03 mm, both measured as a single layer. According to the manufacturer, the glove is thiuram-free, meaning it contains no vulcanisation accelerators, which frequently trigger contact allergies. However, unlike the fully synthetic nitrile gloves in the Pearl range, Select Black, being a natural rubber product, does contain proteins: for staff with a natural latex allergy, a nitrile glove such as the Unigloves Black Pearl is the more suitable choice, not Select Black. Chemical protection according to EN 374, Category III, Type B, tested against three chemicals Select Black is classified as a chemical protective glove according to EN ISO 374-1, Category III, Type B, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. The data sheet lists three test chemicals with numerical values for this glove: 40 % caustic soda achieves permeation level 6 with a degradation rate of minus 55.11 %, 30 % hydrogen peroxide at Level 2 with a degradation rate of plus 9.7 %, and 37 % formaldehyde at Level 2 with a degradation rate of minus 12.4 %. For other chemicals, the manufacturer’s product-specific chemical resistance table continues to apply. Tested according to EN 455, PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. In the 1,000 ml water-tightness test, the glove achieves a high level of watertightness with an AQL value of 1.5; it is also food-safe. The data sheet does not specify a particular medical device class. Choosing the right size The manufacturer also assigns a numerical glove size to each Select Black size, ranging from 5 to 6 for XS to 9 to 10 for XL. These figures are based on hand circumference in inches, measured at the widest point of the hand excluding the thumb, and help when comparing sizes with other PPE gloves. SizeManufacturer’s item no.Glove sizeWidthLength XSGT24015-675 mm (± 5 mm)≥ 240 mm SGT24026-785 mm (± 5 mm)≥ 240 mm MGT24037-895 mm (± 5 mm)≥ 240 mm LGT24048-9105 mm (± 5 mm)≥ 240 mm XLGT24059-10120 mm (± 10 mm)≥ 240 mm Select Black or Select Black 300: choosing the right length Within the black Unigloves latex range, the two Select Black variants differ primarily in their length. The Select Black described here, with a standard length (≥ 240 mm), is suitable for most applications in laboratories, catering and studios. Those who need additional protection on the wrist and forearm, for example, during longer tattoo sessions or when washing up and cleaning in the kitchen, will find Select Black 300, with a cuff length of around 295 mm, to be a suitable addition. It offers the same colour and the same chemical protection profile, but with a thicker palm (0.16 instead of 0.11 mm). For staff with a natural latex allergy, switching to a nitrile colour such as Black Pearl from the nitrile glove range is the right alternative. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The combination of elasticity, grip and an unobtrusive black appearance makes Select Black particularly attractive for tasks where dexterity is paramount: Tattoo and piercing studios, for which the manufacturer has specifically developed the range Cosmetic and beauty treatments requiring a high degree of tactile sensitivity Catering and food processing (food contact suitability according to the manufacturer) Laboratory work with a documented need for chemical resistance to caustic soda, hydrogen peroxide or formaldehyde, provided there is no natural latex allergy The following applies to all these sectors: where latex is ruled out due to allergies, the nitrile Pearl range offers a synthetic alternative with the same basic features of textured fingertips and a rolled cuff. Assessing requirements correctly: from the carton to the session The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. In a tattoo or piercing studio, assuming 2 to 4 pairs of gloves per client appointment (changed during breaks or if soiled), a box of 100 pieces, i.e. 50 pairs, covers approximately 12 to 25 appointments, whilst a whole carton covers 125 to 250 appointments. In a laboratory or catering establishment, assuming a consumption of 10 gloves per workstation per day, one box lasts for approximately two working weeks, whilst a whole carton lasts for around 20 working weeks. The product is sold exclusively in whole cartons; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Is Select Black suitable for people with a latex allergy?No. The glove is made of natural latex and therefore contains proteins, unlike the fully synthetic nitrile gloves in the Pearl range. If you have a known natural latex allergy, a nitrile glove is suitable. What has Select Black been specifically developed for?The manufacturer positions the range under the name suffix ‘Der Kreative’ (The Creative One), specifically for tattoo artists and other precision professions with high demands on tactile sensitivity and grip. How resistant is the glove to chemicals?The data sheet lists three test chemicals with numerical values: 40 % caustic soda (Level 6, minus 55.11 % degradation), 30 % hydrogen peroxide (Level 2, plus 9.7 %) and 37 % formaldehyde (Level 2, minus 12.4 %). The data sheet does not specify breakthrough times in minutes, only the permeation levels. How does Select Black differ from Select Black 300?Mainly in terms of length: Select Black has a cuff of at least 240 mm, whilst Select Black 300 has a cuff of around 295 mm for additional wrist protection, as well as a thicker palm (0.16 mm instead of 0.11 mm). The colour, certification and chemical profile are identical for both. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialLatex (natural rubber) ColourBlack Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palm0.11 ± 0.03 mm Fingertip thickness0.13 ± 0.03 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)40 % caustic soda, Level 6 (-55.11 %), 30 % hydrogen peroxide, Level 2 (+9.7 %), 37 % formaldehyde, Level 2 (-12.4 %) FeaturesPowder-free, thiuram-free, micro-textured fingertips and palm, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type B), EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Select Black latex gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, the extra-long Select Black 300, or a latex-free nitrile alternative from the Unigloves Pearl range for your studio or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€8.50 / 100 piece(s))
L&R Sentina Ambidextrous Latex Examination Gloves, powder-free, 100 pcs. – M
Tried-and-tested latex quality for medical precision The Sentina® Ambidextrous examination gloves from Lohmann & Rauscher (L&R) offer the classic elasticity and good tactile sensitivity of natural latex. They fit like a second skin, enabling work with less fatigue even over extended periods. Thanks to the micro-textured fingertips, they provide a secure grip, even when handling damp instruments or liquids. Powder-free with a rolled cuff These gloves are powder-free to reduce the risk of skin irritation and the inhalation of powder particles. Thanks to a synthetic inner coating, they can still be put on quickly and easily. The sturdy rolled cuff at the wrist provides additional support and reduces the risk of the glove slipping down during treatment or care. Versatile range of applications The Sentina® Ambidextrous is classified as a Class I medical device (tested according to EN 455) and as personal protective equipment (PPE Category III). It is suited for use in hospitals, doctors’ surgeries and in elderly care and nursing. Thanks to its durable material properties, it offers protection against contamination and chemicals (limited protective effect in accordance with EN ISO 374-1 and EN ISO 374-5). Technical details Material: Natural latex (natural white) Type: Powder-free, non-sterile Fit: Suitable for both hands (ambidextrous) Surface: Textured fingertips Inner surface: Synthetic coating (easy to put on) Quality: AQL 1.5 Standards: EN 455 (1–4), EN ISO 374-1, EN ISO 374-5, EN ISO 21420:2020 Classification: Class I medical device, PPE Category III Length: min. 240 mm Scope of delivery 1 box of L&R Sentina® Ambidextrous (contents: 100 pieces) Note: Due to weight considerations, size XL contains 90 pieces. Individual requirements & procurement service Are you looking for a latex-free alternative (e.g. Sentina Nitril) or sterile surgical gloves? We can help you choose the right gloves for your facility. Use our procurement service for bulk enquiries and alternative options.
Meditrade Nitrile StellarGrip Orange protective gloves, carton of 500 (10 boxes of 50), PPE Class III, L
A discarded glove can easily get lost in a crowded toolbox or on a cluttered workbench. Meditrade Nitril StellarGrip protective gloves in orange are industrial-grade protective gloves with a diamond-patterned texture on both sides; they are powder-free, in a striking signal colour and available in cartons of 500 in sizes S to XXL, designed for workshops, warehouses and assembly facilities looking for a robust yet highly visible nitrile glove. Orange as a highly visible work colour The vibrant orange colour stands out clearly against dark workpieces, machine parts or workbenches. This makes it easier to spot a glove that has been set aside or dropped in the workplace than one in a less conspicuous colour, a simple yet noticeable advantage in day-to-day use, particularly when frequently switching between gloves and tools during various work stages. The colour remains clearly visible even in poorly lit storage or workshop areas. Diamond pattern on both sides Like the entire StellarGrip range, the orange version also features a diamond pattern on both sides. This improves grip on oily, dusty or smooth surfaces, for example, when handling tools or metal parts, regardless of whether the inside or outside of the glove is used. As both sides have the same texture, there is no need to worry about a specific orientation when putting them on, which makes it easier to switch quickly between tasks. Robust thickness for continuous use The thickness is at least 0.18 mm on the palm and fingertips, and at least 0.10 mm at the cuff, with a weight of 8.5 g (± 0.5 g) per glove. According to the data sheet, the force at break of 11 N applies both before and after artificial ageing, indicating that the mechanical strength does not depend solely on a fresh, unused glove, but is retained even after a certain period of storage. Size range for commercial use The StellarGrip Orange is available in sizes S, M, L, XL and XXL, a range tailored to commercial use which does not include an XS size. Each size has its own manufacturer’s item number and its own EAN, meaning that individual sizes can be reordered independently of one another if multiple hand sizes are in use within a business. PPE Category III and testing standards The glove is classified as Category III Personal Protective Equipment in accordance with Regulation (EU) 2016/425, complies with EN 374 and EN ISO 21420, and is manufactured under a quality management system certified according to EN ISO 13485:2016. This product is not documented as a medical device; the StellarGrip is positioned purely as an industrial protective glove and is not intended for medical examination activities. Typical applications With its striking signal colour and robust diamond pattern, the StellarGrip Orange is suitable for, amongst other things: Warehouse and order-picking tasks where gloves are frequently taken off and put back on Assembly and maintenance work involving frequent changes of tools Businesses that prefer a highly visible glove colour as part of their health and safety policy Poorly lit warehouse and workshop areas where dark-coloured gloves are harder to spot Industrial and commercial enterprises requiring a more robust nitrile glove than disposable examination gloves For example, in a materials store, it is possible to see at a glance where a pair of gloves has been set aside between two order-picking operations, rather than having to search for them afterwards in a cluttered storage area. Even when moving between workstations, the striking colour makes it easier to quickly check at a glance whether gloves are being worn at all, for example whilst making rounds through several work areas of a site where gloves are compulsory. Colour options in the StellarGrip range Those who prefer the more discreet option for work involving regular contact with oil and dirt will find the same technology in StellarGrip Black. The material, diamond pattern, thickness and pack size are identical for both colours; the only difference lies in the colouring. Some companies deliberately use both colours in parallel, for example to distinguish between different work areas or shifts by colour. The entire product range can also be found under ‘Nitrile gloves’. Technical details MaterialNitrile ColourOrange SurfaceDiamond pattern on both sides PowderingPowder-free Thickness (palm/fingertip)min. 0.18 mm Cuff thicknessmin. 0.10 mm Weight per glove8.5 g ± 0.5 g Force at break (before/after ageing)11 N PPE CategoryIII (Regulation (EU) 2016/425) Packaging500 pieces per carton (10 boxes of 50) StandardsEN 374, EN ISO 21420, EN ISO 13485:2016 Scope of delivery 1 carton = 500 Meditrade Nitril StellarGrip Orange protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities, the black version from the StellarGrip range, or advice on selecting the right gloves for your workplace? Our procurement service will be happy to support you with the suitable selection.
Content: 500 piece(s) (€7.60 / 100 piece(s))
Unigloves Pink Pearl Nitrile Gloves, Pink, Powder-free, Size XS, GP0051
The thinner a glove, the more direct the sense of touch, but the more important it is that the fit is just right. With a palm thickness of at least 0.05 mm, the Unigloves Pink Pearl nitrile gloves are among the thinnest in the Pearl range, a thickness matched only by Black Pearl among the Pearl colours in our range. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a vibrant pink, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000, divided into 10 boxes of 100 each, in four sizes from XS to L. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Pink Pearl gloves are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of at least 0.05 mm, measured as a single layer in the centre of the palm; the data sheet does not specify separate values for the fingertips and cuff. The median force at break is at least 6.0 N, both before and after artificial ageing. Thin material for high tactile sensitivity With a minimum palm thickness of 0.05 mm, Pink Pearl is one of the thinnest documented colours in the Pearl range. A thinner material transmits more tactile feedback to the fingertips, which is beneficial for tasks where fine movements and immediate feedback are crucial, such as when making fine stitches, during dental work at the treatment chair, or when carrying out precision work in cosmetics. The trade-off: a thinner glove is generally more susceptible to mechanical stress than a thicker material, which is why a more robust glove may be the better choice for rough or sharp-edged tasks. Chemical protection according to EN 374, Category III, Type C Pink Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, with a degradation of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies, as only this one test chemical with numerical values is listed in the data sheet. Tested according to EN 455, PPE Category III Pink Pearl complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified according to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE category, Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer. Choosing the right size: just four sizes instead of five in our range The manufacturer assigns a numerical glove size to each Pink Pearl standard size, ranging from 5 to 6 for XS to 8 to 9 for L, according to the data sheet. Important for ordering: Pink Pearl can be selected in sizes XS to L. Size XL (manufacturer’s item no. GP0055) is listed by the manufacturer. If you require size XL, you will find it in other Pearl colours, such as Red Pearl in XL, or please contact us via our procurement service. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00515-676 mm (± 4 mm)≥ 240 mm SGP00526-786 mm (± 4 mm)≥ 240 mm MGP00537-898 mm (± 4 mm)≥ 240 mm LGP00548-9107 mm (± 4 mm)≥ 240 mm Pink in the twelve-colour Pearl range Pink Pearl is one of twelve colours in the Unigloves Pearl range. Amongst the warm shades in the range, Pink is lighter and more subtle than the bolder Magenta Pearl and the bright red Red Pearl. Anyone looking for the same thin material thickness as Pink Pearl but preferring a dark contrasting colour will find it in Black Pearl, which is the only other Pearl colour in our range that also achieves a palm thickness of at least 0.05 mm. All colours share the same basic construction, made from fully dipped nitrile with textured fingertips and a rolled cuff. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The combination of thin material and a striking colour makes Pink Pearl particularly interesting for tasks requiring a high degree of tactile sensitivity: Dental practices and other treatment areas involving fine motor skills when working on patients Cosmetic and beauty salons, for example during eyelash, nail or skin treatments Veterinary practices involving examinations requiring fine motor skills Food processing (food-safe according to the manufacturer) Where a more robust palm is required, such as for heavier cleaning or laboratory work, a thicker Pearl colour such as Cobalt or Green is the more suitable choice. Assessing requirements correctly: from the carton to the treatment area The carton of 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available independently at different workstations. In a dental or beauty practice, assuming 2 pairs of gloves per treatment appointment, a box of 100 pieces, i.e. 50 pairs, covers around 25 appointments, whilst a whole carton covers 250 appointments. If consumption is higher, at 3 pairs per appointment, one box is sufficient for around 16 to 17 appointments and a whole carton for around 165 appointments. The product is sold exclusively as a whole carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Is Pink Pearl also available in size XL?It is available from the manufacturer (item no. GP0055), but here sizes XS to L can be selected. For XL, another Pearl colour or our procurement service is an option. Is Pink Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation of minus 5.3 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. Why is the palm thinner on Pink Pearl than on other colours?According to the data sheet, it is at least 0.05 mm thick, similar in thickness to Black Pearl and thinner than colours such as Cobalt (0.09 mm) or Green Pearl (at least 0.06 mm). This increases tactile sensitivity but reduces mechanical robustness. How do I find the right size?Either by the numerical glove size (XS 5-6 to L 8-9) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourPink Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Available sizesXS to L (XL listed by the manufacturer as GP0055) Length≥ 240 mm Width per sizeXS 76 mm, S 86 mm, M 98 mm, L 107 mm, ± 4 mm in each case Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9 Palm thicknessmin. 0.05 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use only StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Pink Pearl nitrile gloves (size as per variant selection, XS to L) Individual requirements and procurement service Do you require size XL, a different colour from the Unigloves Pearl range, or larger quantities for your practice or studio? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.60 / 100 piece(s))
Unigloves Mint Pearl Nitrile Gloves, Mint, Powder-free, Size L, GP6804
The Unigloves Mint Pearl nitrile gloves add a light, cool shade of green to the Pearl range, which stands out clearly from bolder colours such as Green or Cobalt. They are powder-free, latex-free, thiuram-free and protein-free, fully dipped in nitrile, with textured fingertips for a secure grip and a rolled cuff. The Mint Pearl nitrile gloves are sold in a carton containing 1,000 gloves (10 boxes of 100 each), in five sizes from XS to XL with a comparatively snug fit. Tight fit: width tolerance of just ± 3 mm Mint Pearl has a tight manufacturing tolerance: The width is 76 mm (± 3 mm) for XS, 84 mm (± 3 mm) for S, 94 mm (± 3 mm) for M, 105 mm (± 3 mm) for L and 113 mm (± 3 mm) for XL. This points to comparatively consistent dimensions within a size. The length is at least 240 mm for all sizes, whilst the thickness at the palm is 0.07 mm (± 0.02 mm). The data sheet does not specify values for the fingertips or cuff. The median force at break is at least 6.0 N both before and after artificial ageing. Chemical protection according to EN ISO 374, Category III, Type C Mint Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, which corresponds to the highest level on the scale, with a degradation of minus 5.3 %. Manufacturing takes place under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). With an AQL value of 1.5, the glove achieves a high level of impermeability in the watertightness test; it is also food-safe according to the manufacturer. Typical applications Mint Pearl is suitable wherever a light, friendly-looking contrasting colour is required against darker station colours: Laboratories and medical practices that use mint as a light contrasting colour alongside darker Pearl colours Food processing (food contact suitability according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III Facilities with a narrow size range that benefit from the comparatively low manufacturing tolerance of ± 3 mm For example, Mint Pearl is suitable for stations where a light but not garish shade is desired, whilst neighbouring areas are colour-coded with more vibrant Pearl colours. Mint Pearl in the Pearl range Mint Pearl is one of twelve colours in the Unigloves Pearl range available from us. Those looking for a more vibrant shade of green will find it in the darker Green Pearl, whilst those who prefer a similarly light, pastel colour will find it in Opal Pearl. All colours in the range share the same basic construction of fully-dipped nitrile with textured fingertips and a rolled cuff; however, according to the respective data sheets, they differ in details such as manufacturing tolerance, documented material thickness and scope of certification. Technical details MaterialNitrile, fully dipped ColourMint Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 76 mm (± 3 mm), S 84 mm (± 3 mm), M 94 mm (± 3 mm), L 105 mm (± 3 mm), XL 113 mm (± 3 mm) Thickness (palm)0.07 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Mint Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves Magenta Pearl Nitrile Gloves, Magenta, Powder-free, Size XL, GP8505
Gloves that fit loosely to varying degrees depending on size take time to adjust and hinder dexterity. With the Unigloves Magenta Pearl nitrile gloves, it is striking that the manufacturer specifies the same tight manufacturing tolerance of just ± 3 mm for each of the five sizes, which is tighter than for some other colours in the Pearl range. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a vibrant magenta, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000, divided into 10 boxes of 100 each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Magenta Pearl are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of 0.07 ± 0.02 mm, measured as a single layer in the centre of the palm; the data sheet does not provide separate figures for the fingertips and cuff. The median force at break is at least 6.0 N both before and after artificial ageing. Tight manufacturing tolerances: consistent fit across all sizes A glance at the size chart in the data sheet reveals a distinctive feature: Whilst some other Pearl colours have a larger width tolerance, Magenta Pearl remains constant at ± 3 mm across all five sizes, ranging from 76 ± 3 mm for XS to 113 ± 3 mm for XL. In practice, this means a more consistent fit within each size, regardless of which size is chosen. This is particularly relevant for activities that require a consistently high level of dexterity, such as in the cosmetics industry or for intricate tattoo and piercing work, where a fit that is too loose or too tight can noticeably impair precision. Chemical protection according to EN 374, Category III, Type C Magenta Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, with a degradation of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies, as only this one test chemical is listed with numerical values in the data sheet. Tested according to EN 455, PPE Category III Magenta Pearl complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer. Choosing the right size The manufacturer assigns a numerical glove size to each Magenta Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. SizeManufacturer’s item no.Glove sizeWidthLength XSGP85015 to 676 mm (± 3 mm)≥ 240 mm SGP85026 to 784 mm (± 3 mm)≥ 240 mm MGP85037 to 894 mm (± 3 mm)≥ 240 mm LGP85048 to 9105 mm (± 3 mm)≥ 240 mm XLGP85059 to 10113 mm (± 3 mm)≥ 240 mm Magenta in the twelve-colour Pearl range Magenta Pearl is one of twelve colours in the Unigloves Pearl range available from us. Within the range’s warm colour palette, Magenta stands out clearly from the lighter Pink Pearl and the bright red Red Pearl, meaning that all three can be easily distinguished even when used side by side in the same workplace. If you are looking for a dark contrasting colour, you will find it in Black Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips and a rolled cuff; the width tolerance of ± 3 mm across all sizes differs between the colours according to the data sheets. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The bold colour and consistent fit make Magenta Pearl particularly interesting for tasks that combine visible precision with a clear brand impact: Cosmetics and beauty salons with high standards regarding fit and dexterity Tattoo and piercing studios, where the colour serves not only as protection but also creates a visible, distinctive brand impact Food processing (food contact suitability according to the manufacturer) Businesses using multiple Unigloves Pearl colours, where Magenta is specifically used for colour-coding individual workstations or teams In studios with direct customer contact, the consistent fit across all sizes also ensures that every member of staff has the same grip experience, regardless of their own glove size. Assessing requirements correctly: from the carton to the customer appointment The carton of 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available at different workstations independently of one another. In a beauty or tattoo studio, assuming 2 pairs of gloves per client appointment, a box of 100 pieces, i.e. 50 pairs, covers around 25 appointments, whilst a whole carton covers 250 appointments. If consumption is higher, at 4 pairs per appointment, one box is sufficient for around 12 to 13 appointments and a whole carton for around 125 appointments. Sales are exclusively by the whole carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton What does the tight width tolerance of ± 3 mm mean in practice?It ensures a more consistent fit within each size. Some other Pearl colours have a larger width tolerance, whilst Magenta Pearl remains consistently at ± 3 mm across all five sizes. Is Magenta Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation of minus 5.3 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. How does Magenta differ from Pink and Red Pearl?All three are distinct colours with their own data sheets. Magenta is a colour that lies between the lighter Pink and the bright red Red; technically, the main differences between the colours lie in the material thickness and width tolerance. How do I find the right size?Either by the numerical glove size (XS corresponds to 5 to 6, XL to 9 to 10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourMagenta Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 76 mm, S 84 mm, M 94 mm, L 105 mm, XL 113 mm, ± 3 mm each Glove size per sizeXS 5 to 6, S 6 to 7, M 7 to 8, L 8 to 9, XL 9 to 10 Palm thickness0.07 ± 0.02 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4 PPE categoryIII (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Magenta Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger purchase quantities for your studio or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves Orange Pearl Nitrile Gloves, Orange, Powder-free, Size XS, GP0131
The Unigloves Orange Pearl nitrile gloves add a strong signal colour to the Pearl range, making them particularly suitable for situations where a work area needs to be recognisable at a glance. They are powder-free, latex-free, thiuram-free and protein-free, fully dipped in nitrile, with textured fingertips and a rolled cuff. The Orange Pearl nitrile gloves are sold in a carton containing 1,000 gloves (10 boxes of 100 each), in five sizes from XS to XL. Vibrant signal colour with a thickness of 0.08 mm Orange Pearl is one of the slightly thicker colours in the Pearl range: the thickness at the palm is 0.08 mm (± 0.02 mm); the data sheet does not specify values for the fingertips or cuff. The width increases from 76 mm (± 4 mm) for XS, through 86 mm, 98 mm and 107 mm (each ± 4 mm) for S, M and L up to 115 mm (± 4 mm) for XL, with a length of at least 240 mm across all sizes. The median force at break is at least 6.0 N both before and after artificial ageing. Tested according to EN 455 and EN ISO 374, Category III, Type C Orange Pearl is classified as a Category III, Type C chemical-resistant glove according to EN ISO 374-1 and also offers protection against viruses, fungi and bacteria according to EN ISO 374-5. In testing with 40 % sodium hydroxide solution according to EN 374-4, the highest permeation level 6 was achieved, with a degradation of minus 5.3 %. The glove is manufactured under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). The AQL value of 1.5 in the watertightness test describes the watertightness of the glove; according to the manufacturer, it is also food-safe. Typical applications The bold signal colour makes Orange Pearl an obvious choice wherever a work area needs to be clearly identifiable: Warning areas and hazard zones, where a highly visible signal colour aids identification Waste separation and disposal processes, where orange is often used as a dedicated colour code Food processing (food-safe according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III In workplaces with multiple warning levels, orange can be used specifically as a medium-intensity signal colour between a neutral base colour and a particularly eye-catching colour such as red. Orange Pearl in the Pearl range Orange Pearl is one of twelve colours in the Unigloves Pearl range available from us. Yellow Pearl is suitable as a related warm signal colour, whilst Red Pearl is suitable for even more eye-catching identification. All colours in the range share the same basic construction made from fully dipped nitrile, but differ, as specified in the respective data sheets, in details such as material thickness, width tolerance and the scope of the documented test values. Technical details MaterialNitrile, fully dipped ColourOrange Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 76 mm (± 4 mm), S 86 mm (± 4 mm), M 98 mm (± 4 mm), L 107 mm (± 4 mm), XL 115 mm (± 4 mm) Thickness (palm)0.08 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (#2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Orange Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.01 / 100 piece(s))
Meditrade Nitrile X-Long protective gloves (295 mm, blue, 10 x 100 pcs. carton), L, 1282L
When handling hazardous substances in clinics and laboratories, aggressive cleaning agents or concentrated alkalis, the protection provided by a standard examination glove on the forearm is often insufficient. The Meditrade Nitril X-Long protective gloves extend the protective area with an extra-long cuff; they are powder-free, blue in colour and, according to the data sheet, tested against 19 chemicals and 12 hazardous substances from the clinical sector. The X-Long is sold in cartons of 1,000, in sizes XS to XL. Extra-long cuff for greater protection According to the data sheet, the length is 295 mm (± 5 mm, median). This additional length covers a larger part of the forearm, for example when reaching into containers, when working above head height or when coming into contact with splashes above the rolled cuff of a shorter glove. Thickness at the cuff, palm and fingertips According to the data sheet, the median thickness at the cuff is 0.08 mm (± 0.02 mm), 0.07 mm (± 0.01 mm) on the palm and 0.12 mm (± 0.02 mm) at the fingertips, with a unit weight of 6.5 g (± 0.3 g, size M, median). The force at break is at least 9 N (median) both before and after artificial ageing, tested with an AQL value of 1.5. The greater thickness at the fingertips takes account of the higher mechanical stress experienced when gripping, without unnecessarily restricting the tactile sensation on the palm. Tested chemicals: 19 substances According to EN 16523-1, the X-Long was tested for breakthrough time and performance level against 19 chemicals, including several substances commonly found in laboratories and cleaning environments, with a breakthrough time of over 480 minutes (performance level 6): 40 % sodium hydroxide, 37 % formaldehyde, 50 % potassium hydroxide, 4 % chlorhexidine digluconate, 10 % povidone-iodine, 5 % glutaraldehyde and 5 % ethidium bromide. For other substances, the protective effect is significantly lower, as the data sheet clearly shows: ChemicalBreakthrough timePerformance level Hydrogen peroxide 30 %> 30 min2 Acetic acid 10 %> 60 min3 Hydrochloric acid 36 %> 10 min1 Isopropanol 40 % / 70 %> 10 min1 Ethanol 70 %inconsistentDo not use Isopropanol 100 % / benzalkonium chloride 50 %immediatelyDo not use According to the data sheet, no test values are available for 80 % sulphuric acid and 85 % phosphoric acid. This overview does not replace a separate risk assessment, but it does illustrate how significantly the protective effect varies depending on the substance and concentration. Tested hazardous substances from the clinical sector: 12 substances In addition to the general list of chemicals, 12 hazardous substances from the clinical sector were tested for their breakthrough time according to EN 16523-1. For eleven of the twelve substances, the breakthrough time according to the data sheet is over 240 minutes, for one of them even over 480 minutes. The lowest value on the list is 225 minutes. The breakthrough times for each substance are listed in the data sheet. For organisations that regularly work with such substances, for example in hospital pharmacies or oncology, this breakdown is a basis for their own risk assessment. Typical applications With its extended cuff and tested chemical resistance, the X-Long is suitable for, amongst other things: Handling hazardous substances in hospital pharmacies and oncology Cleaning and disinfection work involving aggressive agents, where splashes onto the forearm are possible Laboratory and industrial work requiring increased splash protection, such as during decanting or immersion Food processing, for which the glove is suitable according to the data sheet For example, when preparing disinfectant solutions from concentrate, the cuff can be deliberately pulled over the sleeve so that, even when moving the arm upwards, no strip of unprotected skin is exposed on the forearm, an advantage that a standard short glove does not offer in this situation. Class I medical device and PPE Category III Type B The X-Long is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III, Type B personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, DIN EN 374-5 (virus penetration) and ASTM F 1671 (ISO 16604), and is manufactured under a quality management system certified according to EN ISO 13485:2016. According to the manufacturer, it is produced without natural rubber latex in accordance with the BGW guidelines on allergy prevention (as at 11/2011). Packaging and order quantities The X-Long is sold in a carton containing 1,000 gloves (10 boxes of 100 gloves each per size), with 63 cartons per pallet. For those who do not require chemical resistance testing for general laboratory routines, the Nitril GreenGen offers an alternative in the same cardboard packaging format. An overview of the full range of products can be found in the Nitrile Gloves category. Technical details MaterialNitrile butadiene rubber (NBR) with polymer coating ColourBlue SurfaceTextured, rolled cuff, ambidextrous Length295 mm ± 5 mm (median) Width per sizeXS 75 ± 5 mm to XL 115 ± 5 mm (median) Thickness (palm)0.07 mm ± 0.01 mm (median) Fingertip thickness0.12 mm ± 0.02 mm (median) Cuff thickness0.08 mm ± 0.02 mm (median) Weight (size M)6.5 g ± 0.3 g (median) Force at break (before/after ageing)min. 9 N (median) AQL1.5 Packaging100 pieces per box, 10 boxes per carton (1,000 pieces), 63 cartons per pallet Chemical resistance19 substances tested according to EN 16523-1 (see product description for an extract) Hazardous substances, clinical sector12 substances tested according to EN 16523-1, breakthrough times in the data sheet Medical device classI (Regulation (EU) 2017/745) PPE categoryIII Type B (Regulation (EU) 2016/425) StandardsEN 455-1/-2/-3/-4, EN 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, ASTM F 1671 (ISO 16604) Scope of delivery 1 carton = 1,000 Meditrade Nitril X-Long protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger purchase quantities, a list of chemicals for a specific substance not covered by standard testing, or assistance with the risk assessment for your workplace? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€4.90 / 100 piece(s))
Unigloves Opal Pearl Nitrile Gloves, Opal, Powder-free, Size M, GP0093
The Unigloves Opal Pearl nitrile gloves feature a light, iridescent colour and, with a thickness of 0.09 mm on the palm, are among the slightly thicker styles in this colour range. They are powder-free, latex-free, thiuram-free and protein-free, fully dipped in nitrile, with textured fingertips and a rolled cuff. The Opal Pearl nitrile gloves are sold in a carton containing 1,000 pieces (10 boxes of 100 each), in five sizes ranging from XS to XL. Thickness of 0.09 mm and individual width tolerances per size The width of Opal Pearl gloves ranges from 75 mm (± 5 mm) for XS, through 85 mm, 95 mm and 105 mm (each ± 5 mm) for S, M and L, up to 120 mm (± 10 mm) for XL, the largest documented tolerance within this colour range. The thickness at the palm is 0.09 mm (± 0.03 mm); values for the fingertips and cuff are not available. The length is at least 240 mm in all sizes; the median force at break is at least 6.0 N both before and after artificial ageing. Tested according to EN 455 and EN ISO 374, Category III, Type C Opal Pearl is classified as a Category III, Type C chemical protection glove according to EN ISO 374-1 and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. In testing with 40 % sodium hydroxide solution according to EN 374-4, the highest permeation level 6 was achieved, with a degradation of minus 5.3 %. Manufacturing takes place under a quality management system certified according to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). With an AQL value of 1.5 in the watertightness test, the glove is also food-safe according to the manufacturer. Typical applications The light, iridescent shade makes Opal Pearl a pleasant alternative to bolder signal colours: Laboratories and medical practices that use a light, understated shade as their standard colour Food processing (food contact suitability according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III Businesses that prefer a slightly thicker material to thinner Pearl colours Where several light Pearl colours are used side by side, Opal Pearl stands out slightly from more monochromatic pastel shades thanks to its iridescent tone, without appearing as bold as a pure signal colour. Application and packaging Like the other nitrile gloves in the Pearl range, Opal Pearl is a non-sterile, single-use glove that can be worn on either hand. The carton containing 1,000 gloves, divided into 10 boxes of 100 each, is suitable for businesses with regular consumption, such as laboratories, medical practices or workshops with multiple workstations, as individual boxes can be made available independently at different stations. Opal Pearl in the Pearl range Opal Pearl is one of twelve colours in the Unigloves Pearl range available from us. Other light, pastel shades in the range include Mint Pearl and Pink Pearl. All colours in the range share the same basic construction made from fully-dipped nitrile, but differ, according to their respective data sheets, in details such as material thickness, width tolerance and scope of certification. Technical details MaterialNitrile, fully dipped ColourOpal Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Thickness (palm)0.09 mm (± 0.03 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (#2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Opal Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves Red Pearl Nitrile Gloves, Red, Powder-free, Size M, GP0063
In hardly any other colour system is red as unambiguously assigned as in the marking of exceptions: stop, caution, special case. It is precisely this signalling effect that the Unigloves Red Pearl nitrile gloves bring to the colour of the gloves in the workplace, for example to visually distinguish a non-standard process step, an allergen area or a cleaning validation from the other colours in the Pearl range. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a vibrant red, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000, divided into 10 boxes of 100 each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Red Pearl gloves are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of 0.08 ± 0.03 mm, measured as a single layer in the centre of the palm; the data sheet does not provide separate figures for the fingertips and cuff. The median force at break is at least 6.0 N both before and after artificial ageing. Red as a signal colour: colour coding for exceptions and special processes In many colour-coding systems used in the food and laboratory sectors, red is the colour that attracts attention most quickly, for example, for production lines handling allergens, for cleaning stages with particularly high hygiene requirements, or for areas where an error would be particularly costly. Because red stands out clearly from the other Pearl colours, Red Pearl is well suited in a multi-colour colour-coding system as a ‘special colour’ that deliberately catches the eye and reminds staff at a glance that different rules apply in this area compared with the standard colour-coding used in other stations. Chemical protection according to EN 374, Category III, Type C Red Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, with a degradation of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies, as only this one test chemical with numerical values is listed in the data sheet. Tested according to EN 455, PPE Category III Red Pearl complies with EN 455 (Parts 1 to 4) for medical single-use gloves and is manufactured under a quality management system certified according to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer. Choosing the right size The manufacturer also assigns a numerical glove size to each Red Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. The width measurements for each size correspond exactly to those of Black Pearl, indicating that both colours are manufactured using the same basic shape. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00615-675 mm (± 5 mm)≥ 240 mm SGP00626-785 mm (± 5 mm)≥ 240 mm MGP00637-895 mm (± 5 mm)≥ 240 mm LGP00648-9105 mm (± 5 mm)≥ 240 mm XLGP00659-10120 mm (± 10 mm)≥ 240 mm Red in the twelve-colour Pearl range Red Pearl is one of twelve colours in the Unigloves Pearl range available from us. As a signal colour, red complements the other warm shades in the range, the lighter Pink Pearl and the vibrant Magenta Pearl, which are more suited to the standard colour code than to exceptional cases. Anyone looking for a dark contrasting colour for cleanliness checks will find it in Black Pearl, which has the same dimensions as Red Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips and a rolled cuff. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The signal effect of red makes Red Pearl useful wherever an area or process step needs to be deliberately highlighted: Food processing involving allergen segregation or special cleaning steps (food contact suitability according to the manufacturer) Laboratories with a colour-coding system for critical or error-prone work steps Facilities using multiple Unigloves Pearl colours, where red is deliberately used as an ‘exception’ colour alongside the regular station colours Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III This means that, in a facility using multiple colours, it is immediately apparent at a glance who is currently working with red and is therefore deliberately deviating from the standard colour code, for example, during a special cleaning procedure or when handling an allergen. Assessing requirements correctly: from the carton to the specific task The carton containing 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available independently of one another at different workstations. If red is reserved exclusively for special tasks rather than for day-to-day operations, for example, with an assumed consumption of just 5 gloves per day on selected special days, one box of 100 covers around 20 uses, whilst a whole carton covers 200 uses. If, on the other hand, red is used continuously as the station colour at a rate of 10 gloves per workstation per day, one box will last for around two working weeks, and a full carton for around 20 working weeks. Sales are exclusively by the whole carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Why is red particularly suitable for identifying exceptions?In many colour-coding systems, red is the most striking colour and is therefore often reserved for special processes, allergen areas or particularly critical work steps, whilst more neutral colours indicate regular operations. Is Red Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation of minus 5.3 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. Is it true that Red Pearl has the same dimensions as Black Pearl?Yes, according to the respective data sheets, the width measurements per size are identical for both colours, indicating the same basic shape. The palm thickness, however, differs slightly (Red 0.08 mm, Black min. 0.05 mm). How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourRed Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palm0.08 ± 0.03 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Red Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger purchase quantities for your business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.60 / 100 piece(s))
Unigloves Cobalt Pearl Nitrile Gloves, Cobalt, Powder-free, Size L, GP1014
Anyone who has to use a tablet, smartphone or barcode scanner from time to time whilst working in a laboratory or at reception will be familiar with the problem: taking off your gloves, using the device, putting them back on, several times an hour. According to the manufacturer, Unigloves Cobalt Pearl nitrile gloves are touchscreen-compatible, meaning that screens can be operated whilst wearing the gloves. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a rich cobalt blue, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Cobalt Pearl are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of 0.09 ± 0.03 mm, measured as a single layer in the centre of the palm. The median force at break is at least 6.0 N, both before and after artificial ageing. Touchscreen-compatible: operate devices without changing gloves According to the manufacturer, Cobalt Pearl allows you to operate a mobile phone or tablet screen without taking off your gloves. This is particularly useful wherever digital documentation, scanning or communication is required whilst working, such as when recording samples in a laboratory, scanning batches in food processing, or documenting procedures at a treatment station. This saves glove changes and reduces the risk of contaminated gloves being reused for screen work without realising it, as the devices can be operated directly through the work gloves. Chemical protection according to EN 374, Category III, Type C Cobalt Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % caustic soda according to EN 374-4, with a degradation rate of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies. Tested according to EN 455, PPE Category III Cobalt Pearl complies with EN 455 (Parts 1 to 4) for medical single-use gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer. Choosing the right size The manufacturer also assigns a numerical glove size to each Cobalt Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. SizeManufacturer’s item no.Glove sizeWidthLength XSGP10115-670 mm (± 10 mm)≥ 240 mm SGP10126-780 mm (± 10 mm)≥ 240 mm MGP10137-895 mm (± 10 mm)≥ 240 mm LGP10148-9110 mm (± 10 mm)≥ 240 mm XLGP10159-10120 mm (± 10 mm)≥ 240 mm Cobalt in the twelve-colour Pearl range Cobalt Pearl is one of twelve colours in the Unigloves Pearl range available from us and should not be confused with the lighter Blue Pearl, which is a separate colour with its own data sheet. Those looking for a dark contrasting colour for cleanliness checks will find it in Black Pearl, whilst those preferring a neutral standard colour for general stations will find it in Green Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips, a rolled cuff and certification according to EN ISO 374-1 Category III Type C. The manufacturer states touchscreen compatibility for Cobalt Pearl. Use, storage and disposal We can provide storage conditions and shelf life on request. Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. As a practical guideline based on everyday laboratory practice, rather than manufacturer’s specifications: nitrile gloves such as Cobalt Pearl are usually changed for each task or process step, but at the latest at the first visible sign of damage, soiling or contact with chemicals outside the tested application. After use, they are generally disposed of as commercial waste, whilst contaminated gloves are disposed of separately in accordance with internal hazardous substances regulations. Typical applications The touchscreen compatibility makes Cobalt Pearl particularly attractive where digital devices form part of the workflow: Laboratories with digital sample recording or tablet-based documentation at the workplace Food processing with barcode or batch scanners (food contact suitability according to the manufacturer) Medical and dental practices with digital patient documentation at the treatment station Facilities using multiple Unigloves Pearl colours, where Cobalt is specifically used for colour-coding individual stations or process steps Wherever a glove change would otherwise be necessary for every brief interaction with a screen, Cobalt Pearl’s touchscreen compatibility reduces the effort involved without compromising on protective performance or certification. Assessing requirements correctly: from the carton to the digital workplace The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. For a workstation with digital documentation and an assumed consumption of 15 gloves per day (changed when switching tasks or samples), one box of 100 covers approximately 6 to 7 working days; a whole carton covers around 13 working weeks. Where there are several digitally equipped workstations, this calculation can be multiplied by the number of workstations to estimate the total requirement for a specific period. Sales are exclusively by the full carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Does the touchscreen really work with every device?The manufacturer generally describes the touchscreen functionality as being suitable for mobile phone and tablet displays. We can provide details on compatibility with individual device models or specific film displays on request. Is Cobalt Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation rate of minus 5.3 %. We can provide the breakthrough time in minutes on request. Is Cobalt Pearl the same as Blue Pearl?No, they are two distinct colours, each with its own data sheet and manufacturer’s item number; Cobalt is a darker, richer blue than the classic Blue Pearl. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourCobalt Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 70 mm (± 10 mm), S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Palm thickness0.09 ± 0.03 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % FeaturesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, touchscreen-compatible according to the manufacturer’s specifications, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Cobalt Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger purchase quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.10 / 100 piece(s))
Nitrile or latex: which disposable glove for which job
Nitrile is a synthetic rubber without the proteins of natural latex. Under Nitrile gloves you will find the Pearl range from Unigloves in many colours, the nitrile range from Meditrade and thicker industrial gloves such as the StellarGrip with a diamond texture on both sides. According to the data sheets, the palm thickness ranges from 0.05 mm (Pink Pearl) to 0.18 mm (StellarGrip), the length is usually at least 240 mm, and the Meditrade Nitril X-Long reaches 295 mm. The Crossguard from Unigloves also has the antimicrobial surface KluraLabs.
Latex gloves made of natural rubber fit more snugly on the hand. For the black latex gloves of the Select Black range, Unigloves also names tattoo artists as a target group, while Meditrade Gentle Skin is designed as a laboratory glove for fine motor work such as pipetting. At 0.11 mm, the palm of Select Black and Gentle Skin is thicker than on most nitrile models.
Two points easily lead to a wrong purchase. A glove with Type C chemical protection is taken to be full protection against solvents, yet Type C only means that at least one test chemical was withstood for ten minutes, with the Pearl gloves 40 % sodium hydroxide solution. That says nothing about acetone or toluene. And the size is ordered by feel. A glove that is too tight tears more easily, one that is too loose reduces the sense of touch. The data sheets give the palm width for each size, for Mint Pearl 84 mm for S, 94 mm for M and 105 mm for L.
Frequently asked questions
What does EN 455 mean for disposable gloves?
EN 455 is the series of standards for medical single-use and examination gloves, in four parts: freedom from holes (Part 1), physical properties such as dimensions and force at break (Part 2), biological evaluation (Part 3) and shelf life (Part 4). Gloves that have been tested to it and declared a class I medical device under Regulation (EU) 2017/745 may be used wherever a medical device is required.
What does EN ISO 374-1 Type A, B or C mean?
EN ISO 374-1 tests permeation, that is, how long a chemical takes to penetrate the material. The breakthrough time is divided into six performance levels, Level 1 from 10 minutes, Level 6 over 480 minutes. Type A requires six of the 18 test chemicals with at least 30 minutes, Type B three with 30 minutes, Type C one with 10 minutes. Uniprotect Blue, Select Black, Unicare Black Latex and AMPri Style Black, for example, are Type B, the Pearl range and Crossguard Type C. As chemical protective gloves they fall into PPE category III of Regulation (EU) 2016/425, with type examination by a notified body. Testing is carried out with the pure test chemical; for other substances and mixtures, the manufacturer requires a separate assessment of the workplace.
What does AQL 1.5 mean?
AQL stands for acceptable quality limit. In the watertightness test to EN 455-1, a sample is filled with 1,000 ml of water and checked for holes, 1.5 is the highest permissible value for medical gloves. The AQL says nothing about chemical protection.
Which disposable gloves for people with allergies?
With an immediate-type latex allergy (Type I), the body reacts to proteins of natural rubber, so only a latex-free glove is an option, that is, nitrile. There are also delayed-type contact allergies (Type IV) to vulcanisation accelerators such as thiurams, and these can also be present in nitrile. For most Pearl colours Unigloves states that they are thiuram-free; for Nitril 3000, Viola and Gentle Skin Grip, Meditrade states that they are free from thiurams and mercaptobenzothiazole. A low-protein latex glove reduces the risk of sensitisation; with an existing Type I allergy, nitrile remains the only option.