bimos Labsit laboratory chair, castors, plastic star base, synthetic leather, seat shell blue, 450 to 650 mm, 9123-MG01-3277
€184.00
% Manufacturer's RRP: €205.00 10% below manufacturer's RRP
- Laboratory chair with 3D flex function in the backrest and flexible front edge of the seat
- Seat height steplessly by gas spring, from 450 to 810 mm depending on the frame
- Frame with castors, with glides and foot ring, or with seat-stop castors and foot ring
- Black upholstered surface made of synthetic leather Magic or Skintec, seat shell in five colours
- Star base made of plastic or polished aluminium, diameter 640 mm
- Hygienic Design, low-joint and form-fitting, load capacity 120 kg (manufacturer's information)
- 3-year full warranty, then spare parts free of charge up to year 10 (wear parts excluded)
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "bimos Labsit laboratory chair, castors, plastic star base, synthetic leather, seat shell blue, 450 to 650 mm, 9123-MG01-3277"
The bimos Labsit is a laboratory chair with backrest, flex function and a seat shell in five colours. It is intended for laboratories, clinics, universities and research institutions, in other words for workstations where a chair should be washable and move with the body. The upholstered surface is black and made of synthetic leather Magic or Skintec; the seat shell comes in blue, anthracite, white, orange and green. Depending on the working height, you choose the frame with castors (450 to 650 mm), with glides and foot ring (520 to 770 mm) or with seat-stop castors and foot ring (560 to 810 mm). The star base is made of black plastic or polished aluminium.
Choose the laboratory chair by working height
bimos calls the three frames Labsit 2, 3 and 4. They differ in seat height and undercarriage. Backrest, seat, upholstery and seat shell are the same.
| Frame | Seat height | Undercarriage | Foot ring |
|---|---|---|---|
| 9123 (Labsit 2) | 450 to 650 mm | Castors | as accessory |
| 9121 (Labsit 3) | 520 to 770 mm | Glides | standard |
| 9125 (Labsit 4) | 560 to 810 mm | Seat-stop castors | standard |
According to bimos, standard castors are not permitted above a seat height of 650 mm for safety reasons, which is why the 9123 ends there. The 9125 has seat-stop castors, which lock under load and roll when the load is removed. According to the manufacturer, they correspond to DIN 68877, including above 650 mm. The 9121 stands on plastic glides, which according to the manufacturer are intended for workstations where the chair has to provide stability. The two higher frames include a chrome-plated, height-adjustable foot ring with a wide tread surface. If you want to stay mobile at high work surfaces too, choose the 9125; if you need a firm stance, choose the 9121.
Flex function in backrest and seat
The backrest is made of plastic and has a 3D flex function. According to the manufacturer, it gives way when you lean back and when you turn your upper body sideways. The front edge of the seat is also flexible and yields when working in a forward-leaning posture. The backrest is 420 mm high and the seat depth is 420 mm. The seat height is adjusted steplessly by the gas spring. A handle on the backrest serves for gripping and moving the chair. bimos specifies a load capacity of 120 kg.
Star base made of plastic or aluminium
The star base has a diameter of 640 mm. As standard it is made of black plastic, which according to the manufacturer is light and robust. Alternatively, there is a star base made of polished aluminium, which according to the manufacturer is easy to keep clean and durable. The star base is chosen independently of frame, upholstery and seat shell colour.
Upholstery and seat shell
A black upholstered surface sits on the seat shell. Synthetic leather Magic is free of PVC and plasticisers, washable and, according to the manufacturer, resistant to commercially available disinfectants. According to the manufacturer, Skintec is robust, easy to care for and likewise resistant to commercially available disinfectants. According to bimos, this resistance has been tested for both upholstery materials. Extremely sharp-edged objects can damage the synthetic leather.
The seat shell is available in blue, anthracite, white, orange and green. The colours differ only in appearance; dimensions and features are the same.
Hygienic Design and cleaning
The Labsit has a low-joint, form-fitting construction (Hygienic Design). According to the manufacturer, it can be used in laboratories of safety level S1 to S3. Which cleaning and disinfecting agents are suitable in an individual case should be clarified before use.
Typical applications
- Laboratory workstations in chemistry, biotechnology and pharma
- Clinics and healthcare facilities
- University and research laboratories, also for training and teaching rooms
- Workstations with high work surfaces that need the 9121 or 9125 with foot ring
- Workstations where the chair is regularly wiped and disinfected
Warranty
bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge; labour and call-out are then charged. Excluded are wear parts such as upholstery, cover materials, castors and surfaces of star bases. The warranty conditions apply to Germany. In the event of a warranty claim, please contact us. The bimos warranty terms (PDF, German) apply. Your statutory rights in respect of defects remain unaffected.
Frequently asked questions about the Labsit laboratory chair
Which frame suits which working height?
The 9123 with castors adjusts from 450 to 650 mm, the 9121 with glides and foot ring from 520 to 770 mm and the 9125 with seat-stop castors and foot ring from 560 to 810 mm. The seat height is steplessly adjustable in each case.
Why does the higher Labsit have seat-stop castors?
According to bimos, standard castors are not permitted above a seat height of 650 mm. Seat-stop castors lock under load and, according to the manufacturer, correspond to DIN 68877. The 9125 goes up to 810 mm, which is why it has them.
What is the difference between a plastic and an aluminium star base?
Both have a diameter of 640 mm. According to the manufacturer, the plastic star base is light and robust, and the polished aluminium is easy to keep clean and durable. Otherwise, frame, dimensions and features are the same.
How much can the Labsit carry?
bimos specifies a load capacity of 120 kg.
Is the Labsit available as an ESD version?
The Labsit models offered here are not ESD versions. bimos has ESD Labsit in its range, which you can enquire about through our procurement service.
How long does the warranty last?
bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge; labour and call-out are charged. Wear parts are excluded.
Technical details
| Seat height | 9123: 450 to 650 mm, 9121: 520 to 770 mm, 9125: 560 to 810 mm |
| Height adjustment | Gas spring, stepless |
| Undercarriage | 9123: castors; 9121: plastic glides and chrome-plated, height-adjustable foot ring; 9125: seat-stop castors and chrome-plated, height-adjustable foot ring |
| Backrest | Plastic, 3D flex function, height 420 mm, handle on the backrest |
| Seat | Flex function on the front edge of the seat, seat depth 420 mm |
| Upholstery | black, synthetic leather Magic (free of PVC and plasticisers) or Skintec |
| Seat shell | Blue, anthracite, white, orange or green |
| Star base | Black plastic or polished aluminium, diameter 640 mm |
| Load capacity | 120 kg (manufacturer's information) |
| Laboratory suitability | Hygienic Design (low-joint, form-fitting), safety level S1 to S3 (manufacturer's information) |
| Standard | DIN 68877, GS mark (manufacturer's information) |
| Manufacturer's warranty | 3-year full warranty from delivery, then spare parts free of charge up to the 10th year, labour and call-out chargeable, wear parts excluded |
Scope of delivery
- bimos Labsit laboratory chair with the selected frame, with black upholstery and seat shell in the selected colour
- Star base made of black plastic or polished aluminium, with gas spring
- 9123: castors. 9121: plastic glides and chrome-plated foot ring. 9125: seat-stop castors and chrome-plated foot ring
- partly disassembled in a carton, assembly according to the assembly and operating instructions
Downloads
Assembly and operating instructions Labsit (PDF, German)Individual requirements and procurement service
For accessories such as armrests, the Lab-Clip with labelling field or a foot ring for the 9123, for larger quantities or special requests, our procurement service can help. You can also ask there about ESD versions of the Labsit.