Binder KB PRO 130 refrigerated incubator, extended temperature range: –20 to 100 °C, 127 l, 9020-0433

The Binder KB PRO 130 is the smallest model in the KB PRO series and, with a usable volume of 127 litres, covers a temperature range from minus 20 °C to plus 100 °C. Unlike the KB series, which operates within a range of 0 °C to 70 °C, the KB PRO 130 thus also opens up applications in the deep-freeze range and for higher temperature profiles – for example, when samples need to be stabilised below the freezing point or thermal tests need to be carried out well above the standard incubation temperature – whilst maintaining a compact footprint.

Compressor cooling with extended temperature range and R-290

The KB PRO 130 utilises an inverter chiller with the climate-neutral refrigerant R-290. At 37 °C, the spatial temperature deviation is ±0.2 K, the temporal deviation is ±0.1 K, and the maximum heat compensation is 450 W. The patented APT.line preheating chamber technology ensures uniform temperature distribution inside the chamber. After the door has been open for 30 seconds, the setpoint temperature of 37 °C is reached again after around 2 minutes; energy consumption is 155 Wh/h at 25 °C and 160 Wh/h at 37 °C.

Typical applications

The extended temperature range makes the KB PRO 130 a versatile tool wherever conventional refrigerated incubation reaches its limits. Typical applications:

• Microbiological incubation and cold stress tests with bacterial, yeast and fungal cultures
• Stability testing in pharmaceutical quality control across a wide temperature range
• Sensory and shelf-life tests in food analysis, including under frozen conditions
• Material testing and research with defined temperature profiles from –20 °C to 100 °C
• Compact controlled incubation in research and teaching where floor space is limited

Features and operation in everyday laboratory use

The interior of the KB PRO 130 is made entirely of stainless steel; the inner door is made of metal oxide-coated safety glass and allows visual inspection of the samples without having to open the door. A door heater prevents condensation from forming. Two stainless steel shelf racks with telescopic rails are included as standard; the interior can be expanded to accommodate up to 6 shelf racks, each with a load capacity of 30 kg, with a maximum total load of 200 kg. A 30 mm diameter feed-through with a silicone plug allows external sensor or measurement cables to be fed through. To ensure process reliability, an independent Class 3.3 temperature selector switch in accordance with DIN 12880, featuring visual and audible alarms, is integrated; an internal data logger records the measured values and can be read out via USB. The APT-COM Basic Edition management software is included as standard, whilst a device self-test enables a comprehensive status analysis.

Technical details

Contents

• 1x Binder KB PRO 130 refrigerated incubator (9020-0433)
• 2x stainless steel shelves with telescopic rails
• BINDER Multi Management Software APT-COM Basic Edition
• Operating instructions

Customised requirements & procurement service

Original accessories are available for the KB PRO 130, such as additional shelf grids, a flexible Pt100 internal sensor for displaying or controlling sample temperature, further silicone feed-throughs in various sizes, or the APT-COM management software (Professional Edition) for connection to a data network. Calibration certificates and maintenance contracts can also be arranged if required. Do you require additional accessories, a bespoke configuration, or assistance in selecting the right refrigerated incubator for your application? LT Laborhandel will be happy to assist you with procurement and configuration via our procurement service.