Brand Transferpette S Pipette Package 1, 5 Pipettes 0.1 µl to 1 ml, DE-M, 705896

Anyone who wants to equip a laboratory with several volume ranges in one go rarely needs just a single pipette. The Brand Transferpette S Pipette Package 1 bundles 5 variable single-channel pipettes from 0.1 µl to 1 ml in one combination and so covers at once what would otherwise take several individual orders, ready for use in the stand and typically suited to a complete initial laboratory equipment across five volume ranges, from PCR volumes to preparative sample preparation. This reduces the coordination effort compared with several individual orders with different delivery times.

5 pipettes for the complete range

Pipette Package 1 combines 5 Transferpette S single-channel pipettes with variable volume: the D-2.5 for 0.1-2.5 µl with an increment of 0.002 µl, the D-10 for 0.5-10 µl with an increment of 0.01 µl, the D-20 for 2-20 µl with an increment of 0.02 µl, the D-200 for 20-200 µl with an increment of 0.2 µl and the D-1000 for 100-1000 µl with an increment of 1 µl. Together, the devices cover the range 0.1 µl to 1 ml. A matching pipette tip size is defined for each pipette, included in the set as 3x TipBox.

Precision under German weights and measures law

All pipettes in the set carry the DE-M marking under German weights and measures law, and the accuracy testing follows DIN EN ISO 8655 with three test points per volume range (100, 50 and 10 percent of the nominal volume). At the respective nominal volume, the accuracy A is between ±1.4 % and ±0.6 % depending on the model, a level of accuracy that matters for dilution series and quantitative analyses. The accuracy A describes the deviation of the average dispensed volume from the target value, and the coefficient of variation CV the scatter of several repetitions at the same volume. Both values increase towards the lower end of a volume range.

One-handed operation and tool-free adjustment

Every pipette in the set is operated with one hand, from volume setting to tip ejection, protected by a lock (UNLOCK/LOCK). Adjustment is tool-free using Easy Calibration, and an adjustment slider under the label window shows a changed factory setting.

Autoclavable fully assembled

Every pipette in the set withstands autoclaving in the assembled state, as a complete unit, at 121 degrees Celsius and 2 bar, with a holding time of at least 15 minutes to DIN EN 285, and dismantling before sterilisation is not required.

Quality certificate and warranty included

A quality certificate (Performance Certificate) is enclosed with the set, which can be filed directly into your own quality assurance. The single-channel pipettes of the Transferpette S series are covered by a three-year warranty.

Which laboratory this combination suits

A laboratory that covers both PCR preparation in very small volumes and larger sample preparation up to 1 ml usually cannot manage with a single starter kit. With five volume ranges, Pipette Package 1 closes the gap between the smaller kits and so covers a complete molecular biology workstation in one go.

Advantage of the set over individual procurement

For a newly set up laboratory, Pipette Package 1 covers 5 volume ranges in a single process, instead of collecting them one by one. All devices come from the same series and are operated in the same way, which makes training easier. The bench stand supplied keeps all 5 pipettes within reach between two uses, instead of leaving them lying loose on the laboratory bench.

Typical applications

• complete initial laboratory equipment across five volume ranges, from PCR volumes to preparative sample preparation
• Dilution series and adding reagents across several volume ranges
• Initial laboratory equipment for newly set up workstations as well as education and training
• Setting up an additional workstation without several individual orders

Technical details

Scope of delivery

• 1x Transferpette S variable, D-2.5 (0.1-2.5 µl)
• 1x Transferpette S variable, D-10 (0.5-10 µl)
• 1x Transferpette S variable, D-20 (2-20 µl)
• 1x Transferpette S variable, D-200 (20-200 µl)
• 1x Transferpette S variable, D-1000 (100-1000 µl)
• 3x TipBox, filled
• 1x bench stand
• 1x quality certificate
• 1x silicone grease

Individual requirements & procurement service

If this combination does not fit completely, LT Laborhandel offers further Transferpette S sets and individual models with a different volume combination. For pipette tips, spare parts and larger quantities, the procurement service from LT Laborhandel can help.