Fixing clip for Erlenmeyer flasks in the INC 125 incubation shaker
Eight sizes from 10 ml to 2,000 ml
Secure hold even at higher shaking frequencies
Fits INC 125 FS digital (SP20/SP25) and FCS digital (SP25)
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA AS 2.0 Fixing Clip for Erlenmeyer Flasks, 10 ml, for INC 125 Incubators, 0020016475"
When shaking Erlenmeyer flasks in the INC 125, a matching fixing clip keeps the flask firmly on the platform even at higher shaking frequencies, rather than relying on adhesion alone. The IKA AS 2 fixing clips are available in eight sizes for the respective flask, from 10 ml to 2,000 ml, so a matching clip can be fitted for almost every common flask volume.
Each clip is mounted individually on the shaking platform and holds exactly one flask of the corresponding volume class. For experimental series running several flasks of different sizes at the same time, several clips of different sizes can be mounted alongside each other.
Compatibility
The AS 2 series is an official accessory for the IKA INC 125 FS digital incubation shakers (SP20 and SP25) and for the IKA INC 125 FCS digital (SP25) cooling and shaking incubator. This applies to all eight sizes.
Technical details
Design
Single clip for one Erlenmeyer flask
Available sizes
AS 2.0 (10 ml) to AS 2.7 (2,000 ml)
Packaging unit
1 piece
Scope of delivery
1 x IKA AS 2.x fixing clip in the selected size.
Individual requirements & procurement service
For the right combination of adhesive mat and fixing clips depending on flask loading in the INC 125, our procurement service helps with choosing the sizes and quantities needed.
Temperature control and air circulation
Cultivating aerobic, temperature-sensitive microorganisms requires uniform temperature control. The IKA INC 125 FS digital is an incubation shaker with forced convection (active air circulation). An electronically controlled axial fan provides continuous air circulation in the 125-litre interior; the fan speed can be adjusted from 0 to 100 %. The circulating air evens out temperature differences inside the chamber. The system controls the surface heating elements with a PID controller and the integrated PT-100 sensor. According to the data sheet, the temperature homogeneity is ± 0.3 K.
Orbital shaking (SP20)
The oxygen supply to the liquid phase limits the growth of high-density aerobic cultures. The suffix “SP20” stands for the shaking platform with an orbital stroke of 20 mm. The brushless direct drive operates in the range of 10 to 300 rpm. The shaking motion increases the interface between gas and liquid and thereby promotes oxygen transfer. The shaking platform can be removed without tools. The unit can then be used as a static incubator up to 100 °C.
Inner chamber and decontamination mode
In microbiological analysis, it is important to avoid carry-over between batches (e.g. foreign DNA, mycoplasma or spores). The welded inner chamber of the INC 125 FS is made of corrosion-resistant stainless steel (AISI 304), and generous edge radii make it harder for biofilms to settle. For changing between batches, the unit has an automatic decontamination mode that heats the chamber to 120 °C in a controlled manner. An integrated overflow with drain tube collects liquid from broken glass flasks.
Technical details
Thermodynamics & heating technology
Operating temperature range (shaking mode): room temperature + 8 °C to 80 °C
Operating temperature range (static operation): room temperature + 8 °C to 100 °C
Heating power / heat transfer: 500 W (surface heating elements)
Thermal decontamination: Integrated automatic mode at 120 °C
Heating time (to 37 °C @ 22 °C ambient): 15 min
Recovery time after door opening (to 37 °C @ 22 °C ambient): 5 min
Metrology & control engineering
Temperature sensor: PT 100 for PID control
Setting and display resolution: 0.1 K
Temperature stability (at 37 °C @ 22 °C ambient): ± 0.1 K
Temperature homogeneity (at 37 °C @ 22 °C ambient): ± 0.3 K
Display: LCD display
Timer: Digital, max. 100 days
Kinematics & Mechanics
Shaking stroke (amplitude): 20 mm (SP20 specification)
Speed range: 10 – 300 rpm (speed deviation: ± 5 rpm)
Maximum shaking load (including attachment): 7.5 kg
Dimensions of the shaker base: 340 x 480 mm
Airflow principle: Forced convection (active air circulation, fan adjustable from 0 – 100 %)
Interior & dimensions
Total volume of the inner chamber: 125 litres
Interior material: Corrosion-resistant stainless steel (AISI 304)
System dimensions (W x H x D): 700 x 825 x 635 mm / Weight: 65 kg
Grid shelves: Up to 6 can be fitted / Load per tray: max. 20 kg
Internal glass door: Yes (for metrological visual inspection without thermodynamic interference)
Drain hose: Integrated, 10 mm internal diameter
Safety & environmental conditions
Thermal safety device: Adjustable safety temperature limiter (TB Class 1 according to DIN 12880)
Permissible ambient temperature range: 15 – 32 °C
Permissible relative humidity: max. 80 %
Noise emission: 55 dB(A)
Protection class (according to DIN EN 60529): IP 20
Electrical & connectivity
Voltage / Frequency: 220–240 V / 50/60 Hz
Power consumption: max. 500 W (fuses: 2x T6.3A 250V)
Data interfaces: USB and RS 232 (for data logging via labworldsoft®)
Scope of delivery
1 x IKA INC 125 FS digital (SP20) incubation shaker
1 x IKA IO SP 20 shaking platform (20 mm stroke, removable)
2 x IKA IO T 1.00 grid shelves (stainless steel, incl. guide rails)
1 x USB cable (A-B)
1 x IEC power cable
(Important note: Specific clamps for Erlenmeyer flasks or STICKMAX adhesive mats are needed if the samples have to be mechanically secured to the platform, and are not included in the scope of delivery!)
WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories
With the INC 125 FS digital (SP20), the reaction vessels should be firmly secured at 300 rpm so that they do not slip and glass flasks do not break. Suitable stainless-steel retaining clamps for the respective Erlenmeyer flask volumes and the STICKMAX adhesive mat for irregularly shaped vessels are available for this purpose. If cultures are to be incubated without shaking, the platform can be removed and the incubator fitted with additional grid shelves (IO T 1.00). Our procurement service will be happy to help you choose the right combination of accessories.
Sale price:
€4,335.00
Manufacturer's RRP:€5,780.0025% below manufacturer's RRP
Temperature control and air circulation
Cultivating aerobic, temperature-sensitive microorganisms requires uniform temperature control. The IKA INC 125 FS digital is an incubator shaker with forced convection (active air circulation). An electronically controlled axial fan provides continuous air circulation in the 125-litre interior; the fan speed can be adjusted from 0 to 100 %. The circulating air evens out temperature differences inside the chamber. The system controls the surface heating elements with a PID controller and the integrated PT-100 sensor. According to the data sheet, the temperature homogeneity is ± 0.3 K.
Orbital shaking (SP25)
The oxygen supply to the liquid phase limits the growth of high-density aerobic cultures. The suffix “SP25” stands for the shaking platform with an orbital stroke of 25 mm. This larger stroke is intended for use with large-volume Erlenmeyer flasks (> 1 litre). The brushless direct drive operates in the range of 10 to 300 rpm. The shaking motion increases the interface between gas and liquid and thereby promotes oxygen transfer. The shaking platform can be removed without tools. The unit can then be used as a static incubator up to 100 °C.
Interior chamber and decontamination mode
In microbiological analysis, it is important to avoid carry-over between batches (e.g. foreign DNA, mycoplasma or spores). The welded interior chamber of the INC 125 FS is made of corrosion-resistant stainless steel (AISI 304), and generous edge radii make it harder for biofilms to settle. For changing between batches, the unit has an automatic decontamination mode that heats the chamber to 120 °C in a controlled manner. An integrated overflow with drain tube collects liquid from broken glass flasks.
Technical details
Heating and temperature
Working temperature range (shaking mode): room temperature + 8 °C to 80 °C
Working temperature range (static operation): room temperature + 8 °C to 100 °C
Heating power / heat transfer: 500 W (surface heating elements)
Thermal decontamination: Integrated automatic mode at 120 °C
Heating time (to 37 °C @ 22 °C ambient): 15 min
Recovery time after door opening (to 37 °C @ 22 °C ambient): 5 min
Metrology & Control Engineering
Temperature sensor: PT 100 for PID control
Setting and display resolution: 0.1 K
Temperature stability (at 37 °C @ 22 °C ambient): ± 0.1 K
Temperature homogeneity (at 37 °C @ 22 °C ambient): ± 0.3 K
Display: LCD display
Timer: Digital, max. 100 days
Shaking and mechanics
Shaking stroke (amplitude): 25 mm (Model SP25)
Speed range: 10 to 300 rpm (speed deviation: ± 5 rpm)
Maximum shaking weight (including attachment): 7.5 kg
Dimensions of the shaker base: 340 x 480 mm
Airflow principle: Forced convection (active air circulation, fan adjustable from 0 to 100 %)
Interior & dimensions
Total volume of the inner chamber: 125 litres
Interior material: Corrosion-resistant stainless steel (AISI 304)
System dimensions (W x H x D): 700 x 825 x 635 mm / Weight: 65 kg
Grid shelves: Up to 6 can be fitted / Load per shelf: max. 20 kg
Internal glass door: Yes (for metrological visual inspection without thermodynamic interference)
Drain hose: Integrated, 10 mm internal diameter
Safety & Environmental Conditions
Thermal safety device: Adjustable safety temperature limiter (TB Class 1 according to DIN 12880)
Permissible ambient temperature range: 15 to 32 °C
Permissible relative humidity: max. 80 %
Noise emission: 55 dB(A)
IP rating (in accordance with DIN EN 60529): IP 20
Electrical & Connectivity
Voltage / Frequency: 220 to 240 V / 50/60 Hz
Power consumption: max. 500 W (2x T6.3A 250V fuses)
Data interfaces: USB and RS 232 (for data logging via labworldsoft®)
Scope of delivery
1 x IKA INC 125 FS digital (SP25) incubation shaker
1 x IKA IO SP 25 shaking platform (25 mm stroke, removable)
2 x IKA IO T 1.00 grid shelves (stainless steel, incl. guide rails)
1 x USB cable (A-B)
1 x IEC power cable
(Important note: Specific clamps for Erlenmeyer flasks or STICKMAX adhesive mats are essential for mechanically securing the samples to the platform and are not included in the scope of delivery!)
WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories
With the wide 25 mm amplitude and 300 rpm, the reaction vessels should be firmly secured so that centrifugal forces do not cause them to slip or break. Suitable stainless steel retaining clamps for large-volume Erlenmeyer flasks and the STICKMAX adhesive mat for irregularly shaped vessels are available for this purpose. If cultures are to be incubated without shaking, the platform can be removed and the incubator fitted with additional grid shelves (IO T 1.00). Our procurement service will be happy to help you choose the right combination of accessories.
Sale price:
€4,335.00
Manufacturer's RRP:€5,780.0025% below manufacturer's RRP
The IKA INC 125 FCS digital (SP25) is a cooling and shaking incubator with a chamber volume of 125 litres for the cultivation of heat-sensitive cells and microbiological samples. The unit utilises compressor cooling with the refrigerant R290 (propane) and, in combination with the heating function, covers an operating temperature range of 5 °C to 80 °C with the shaking function active, and up to 100 °C in static mode without shaking. A PID control system and reversibly controllable air circulation from 40 to 100 % ensure temperature uniformity of ± 0.3 K throughout the chamber.SP25 shaking platform: 25 millimetre stroke for large vesselsThe designation SP25 refers to the oscillation amplitude (stroke) of the shaking platform, which is 25 millimetres. Driven by the same direct drive operating at 10 to 300 revolutions per minute, this extended stroke achieves intensive mixing even at low to medium speeds. This is particularly suitable for large Erlenmeyer flasks, as it improves oxygen transfer without requiring very high speeds and the associated higher shear forces on the cells. The SP25 platform can also be removed without tools, meaning the unit can alternatively be used as a static cooling incubator with a temperature range up to 100 °C.SP25 compared to the SP20 modelThe INC 125 FCS digital is also available with the SP20 shaking platform, which has a shorter stroke of 20 millimetres and is designed for small to medium-sized vessels. The SP25 version described here, with a 25-millimetre stroke, is specifically designed for applications involving large-volume Erlenmeyer flasks, where the greater range of motion ensures sufficient mixing even at moderate speeds. The chamber, refrigeration system and temperature control are identical in both versions; the difference lies solely in the shaking platform.Stainless steel chamber and thermal decontaminationThe welded inner chamber is made of corrosion-resistant AISI 304 stainless steel with generous edge radii, which make it difficult for biofilms to form. To facilitate switching between critical batches, the incubator features an automated decontamination mode that heats the chamber in a controlled manner to 100 °C. A defrost function with continuous drainage prevents ice formation inside the chamber during low-temperature incubations. The drainage system features a hose connection with an internal diameter of 10 mm.Capacity and configurationThe chamber accommodates up to 6 grid shelves, each designed for a maximum load of 20 kg. On the shaking platform itself, a surface area of 340 x 480 mm is available for a permissible shaking weight of 7.5 kg, a figure that must be taken into account, particularly when using large-volume flasks. A viewing window in the door allows the samples to be monitored without having to open the chamber and thereby disrupt the temperature control. With system dimensions of 700 x 1,000 x 635 mm and a weight of 95 kg, sufficient floor space must be allowed for when installing the unit.Operation, display and safetyAn LCD display with a timer function for up to 100 days shows the relevant process data. Temperature control is provided by a PT-100 sensor with a four-wire connection; the setting and display resolution is 0.1 K. A Class 1 safety device according to DIN 12880 is fitted as a thermal safety measure, supplemented by an integrated setpoint limiter which protects the chamber in the event of unexpected overtemperature. Permissible ambient temperatures range from 15 to 32 °C at a maximum relative humidity of 70 %.Connection, power consumption and noise emissionThe incubator features a USB-C data interface and is designed for a maximum power consumption of 1,000 W at 220 to 240 V, 50/60 Hz; other voltage options, such as 100 to 120 V, are available. The isothermal energy consumption at 37 °C is 79 Wh/h. With a noise emission of 55 dB(A), the INC 125 FCS digital can also be operated in laboratory environments where several units are running simultaneously.Typical applicationsThe INC 125 FCS digital (SP25) is particularly suitable for cultivation tasks involving large-volume vessels and moderate speed requirements:Cultivation in large-volume Erlenmeyer flasksCell culture and fermentation batches with high oxygen requirements at moderate speedsSwitching between shaking incubation and static operation up to 100 °C (also usable for cold storage) thanks to a tool-free removable platformQuality assurance and routine cultivation with high sample throughput thanks to the decontamination modeThanks to the combination of compressor cooling and a heating function, a single unit thus covers both cold storage and shaking incubation tasks for large-volume cultures, which would otherwise require two separate units.Technical detailsOperating temperature range5 to 80 °C (extended to 100 °C in static operation)RefrigerantR290 (propane), charge 55 g, max. system pressure 21 barHeating power750 WAutomatic defrostintegratedThermal decontaminationat 100 °CTemperature sensorPT 100 (4-wire)Setting and display resolution0.1 KTemperature stability (37 °C, ambient temperature 22 °C)± 0.3 KTemperature homogeneity (37 °C, ambient 22 °C)± 0.3 KHeating time (to 37 °C, ambient 22 °C)8 minRecovery time (to 37 °C, ambient 22 °C)4 minDisplay and timerLCD, maximum time setting 100 daysShaking stroke (SP25)25 mmSpeed range10 to 300 rpm (tolerance ± 5 rpm)Permissible shaking weight7.5 kgFootprint of shaking platform340 x 480 mmChamber volume125 litresSystem dimensions (W x H x D)700 x 1,000 x 635 mmWeight95 kgGrid shelvesmax. 6Load per shelfmax. 20 kgViewing windowintegrated into the doorDrain hose10 mm internal diameterThermal safety deviceTB Class 1 according to DIN 12880Safety shut-offIntegrated setpoint limiterPermissible ambient temperature15 to 32 °CPermissible relative humiditymax. 70 %Noise emission55 dB(A)Energy consumption (isothermal at 37 °C)79 Wh/hVoltage/frequency220 to 240 V, 50/60 Hz (other voltage options such as 100 to 120 V available)Power consumptionmax. 1,000 WElectrical fuse2 x T6.3A 250VDegree of protectionIP 20Data interfaceUSB-CScope of delivery1 x IKA INC 125 FCS digital (SP25) cooling and shaking incubator1 x IKA IO SP 25 shaking platform (25 mm stroke, removable)2 x IKA IO T 1.00 grid shelves (stainless steel)1 x USB cable (C-A) and power leadClamps for Erlenmeyer flasks and STICKMAX adhesive mats for securing the vessels are not included in the scope of delivery and are required additionally for shaking operation.Individual requirements & procurement serviceFor large-volume Erlenmeyer flasks, we recommend custom-fit stainless steel retaining clips; for asymmetrical vessels, the universal STICKMAX adhesive mat. Through our procurement service, we can assist you in putting together and scaling your setup. The IKA manufacturer’s warranty applies to the INC 125 FCS digital (SP25): 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Sale price:
€5,966.25
Manufacturer's RRP:€7,955.0025% below manufacturer's RRP
The IKA INC 125 FCS digital (SP20) is a cooling and shaking incubator with a chamber volume of 125 litres for the cultivation of heat-labile cells and microbiological samples. The unit utilises compressor cooling with the refrigerant R290 (propane) and, in combination with the heating function, covers an operating temperature range of 5 °C to 80 °C with the shaker function active, and up to 100 °C in static mode without shaking. A PID control system and reversibly controllable air circulation from 40 to 100 % ensure temperature uniformity of ± 0.3 K throughout the chamber.SP20 shaking platform: 20 millimetres of strokeOxygen supply is often the limiting factor in aerobic cultures. The designation SP20 refers to the oscillation amplitude (stroke) of the integrated, orbital-action shaking platform, which is 20 millimetres. Driven by a direct drive operating at 10 to 300 revolutions per minute, this stroke generates mixing that improves oxygen transfer in the liquid phase. The shaking platform can be removed without tools: without the platform, the unit functions as a static cooling incubator with an extended temperature range up to 100 °C, making the same incubator suitable for both shaking and pure cold storage applications.SP20 compared to the SP25 modelThe INC 125 FCS digital is also available with the SP25 shaking platform, which has a larger stroke of 25 millimetres and is designed for large-volume Erlenmeyer flasks. The SP20 version described here, with a 20-millimetre stroke, is, by contrast, suitable for small and medium-sized vessels where a slightly more compact range of motion is sufficient. The chamber, refrigeration technology and temperature control are identical in both versions; the difference lies solely in the shaker platform.Stainless steel chamber and thermal decontaminationThe welded inner chamber is made of corrosion-resistant AISI 304 stainless steel with generous edge radii, which make it difficult for biofilms to form. To facilitate switching between critical batches, the incubator features an automated decontamination mode which heats the chamber to 100 °C in a controlled manner. A defrost function with continuous drainage prevents ice formation inside the chamber during low-temperature incubations. The drainage system features a hose connection with an internal diameter of 10 mm.Capacity and configurationThe chamber accommodates up to 6 grid shelves, each designed for a maximum load of 20 kg. On the shaking platform itself, a working area of 340 x 480 mm is available for a permissible shaking weight of 7.5 kg. A viewing window in the door allows the samples to be monitored without having to open the chamber and thereby disrupt the temperature control. With system dimensions of 700 x 1,000 x 635 mm and a weight of 95 kg, sufficient floor space must be allowed for when installing the unit.Operation, display and safetyAn LCD display with a timer function for up to 100 days shows the relevant process data. Temperature control is provided by a PT-100 sensor with a four-wire connection; the setting and display resolution is 0.1 K. A Class 1 safety device according to DIN 12880 is fitted as a thermal safety measure, supplemented by an integrated setpoint limiter which protects the chamber in the event of an unexpected overtemperature. Permissible ambient temperatures range from 15 to 32 °C at a maximum relative humidity of 70 %.Connection, power consumption and noise emissionsThe incubator features a USB-C data interface and is designed for a maximum power consumption of 1,000 W at 220 to 240 V, 50/60 Hz; other voltage options, such as 100 to 120 V, are available. The isothermal energy consumption at 37 °C is 79 Wh/h. With a noise emission of 55 dB(A), the INC 125 FCS digital can be operated even in laboratory environments where several units are running simultaneously.Typical applicationsThe INC 125 FCS digital (SP20) is suitable for the cultivation of microbiological and cell biology samples where temperature control and agitation must be precisely regulated:Cultivation of bacterial and yeast cultures in shaking flasks or on microtitre platesCell culture applications at a defined temperature between 5 °C and 80 °CSwitching between shaking incubation and static operation up to 100 °C (also usable for cold storage) via a tool-free removable platformQuality assurance and routine cultivation with high sample throughput thanks to the decontamination modeThanks to the combination of compressor cooling and a heating function, a single unit thus covers both cold storage and shaking incubation tasks.Technical detailsOperating temperature range5 to 80 °C (extended to 100 °C in static operation)RefrigerantR290 (propane), charge 55 g, max. system pressure 21 barHeating power750 WAutomatic defrostintegratedThermal decontaminationat 100 °CTemperature sensorPT 100 (4-wire)Setting and display resolution0.1 KTemperature stability (37 °C, ambient temperature 22 °C)± 0.3 KTemperature homogeneity (37 °C, 22 °C ambient)± 0.3 KHeating time (to 37 °C, ambient 22 °C)8 minRecovery time (to 37 °C, ambient 22 °C)4 minDisplay and timerLCD, maximum time setting 100 daysShaking stroke (SP20)20 mmSpeed range10 to 300 rpm (tolerance ± 5 rpm)Permissible shaking weight7.5 kgFootprint of shaking platform340 x 480 mmChamber volume125 litresSystem dimensions (W x H x D)700 x 1,000 x 635 mmWeight95 kgGrid shelvesmax. 6Load per shelfmax. 20 kgViewing windowintegrated into the doorDrain hose10 mm internal diameterThermal safety deviceTB Class 1 according to DIN 12880Safety shut-offIntegrated setpoint limiterPermissible ambient temperature15 to 32 °CPermissible relative humiditymax. 70 %Noise emission55 dB(A)Energy consumption (isothermal at 37 °C)79 Wh/hVoltage/frequency220 to 240 V, 50/60 Hz (other voltage options such as 100 to 120 V available)Power consumptionmax. 1,000 WElectrical fuse2 x T6.3A 250 VDegree of protectionIP 20Data interfaceUSB-CScope of delivery1 x IKA INC 125 FCS digital (SP20) cooling and shaking incubator1 x IKA IO SP 20 shaking platform (removable)2 x IKA IO T 1.00 grid shelves (stainless steel)1 x USB cable (C-A) and power leadClamps for Erlenmeyer flasks and STICKMAX adhesive mats for securing the vessels are not included and are required additionally for shaking operation.Individual requirements & procurement serviceFor shaking operation, we recommend suitable fixings for your vessels: STICKMAX adhesive mats for asymmetrical containers or stainless steel retaining clips for Erlenmeyer flasks. Through our procurement service, we can assist you in putting together and scaling your setup. The IKA manufacturer’s warranty of 2 years applies to the INC 125 FCS digital (SP20), extended to 3 years on registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Sale price:
€5,966.25
Manufacturer's RRP:€7,955.0025% below manufacturer's RRP