Skip to main content Skip to search Skip to main navigation

IKA EUROSTAR 20 high speed digital overhead stirrer with LCD display, up to 6,000 rpm, 0020105160

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA EUROSTAR 20 high speed digital overhead stirrer with LCD display, up to 6,000 rpm, 0020105160"

The IKA EUROSTAR 20 high speed digital overhead stirrer (MPN 0020105160) represents the modernised, mechatronically optimised generation of specialised laboratory stirrers for high-speed applications. With a footprint that, according to the manufacturer, is reduced by up to 23 % compared to previous models, this unit offers high functional density within a minimal footprint. Designed for simple to moderately demanding mixing tasks, it handles sample volumes of up to 20 litres (based on water) and covers a viscosity range of up to 10,000 mPas. It is suitable for emulsification processes, microstructural homogenisation and intensive mixing cycles in everyday B2B laboratory work.

Within the EUROSTAR series, the Model 20 high speed digital is designed for speed rather than volume: with up to 6,000 revolutions per minute, it achieves a significantly higher speed range than the standard models in the Digital series (20, 40, 60, 100 digital), which offer a maximum of 2,000 rpm, whilst also featuring a smaller mixing volume of 20 litres.

Torque trend measurement and stepless speed control

The metrological feature of the EUROSTAR 20 high speed digital is its integrated torque trend measurement with an accuracy of ±6 Ncm. The relative viscosity trend is displayed on the LCD screen, providing laboratory staff with feedback on the progress of the mixing process. An automatic speed control system continuously regulates the brushless DC motor within a high-speed range of 150 to 6,000 revolutions per minute and maintains the set speed even when the material changes.

Ergonomic tool change and scope of delivery

The integrated quick-release chuck allows one-handed replacement of the stirring shafts without the need for additional tools. The R 6000 precision stirring shaft, with a length of 280 mm and a maximum immersion depth of 220 mm, is included in the scope of delivery for immediate use. A lock button protects the unit during operation against accidental changes to the settings. In the event of a mechanical blockage or critical overload, independent safety circuits trigger an automatic shutdown of the mixing drive.

Digital documentation and robust IP 54 housing design

The composite housing, made from coated cast aluminium and thermoplastic, is splash- and steam-proof in accordance with degree of protection IP 54. The brushless DC drive operates wear-free and quietly, and is designed for a 100 % duty cycle in continuous operation. Integrated timer and counter functions enable time-controlled experiments. USB-C and RS232 interfaces are used for documentation via the labworldsoft laboratory software.

Typical applications

  • Dispersing and emulsifying at high speeds of up to 6,000 revolutions per minute, where stirrers operating at 2,000 rpm reach their limits
  • Production of finely dispersed emulsions and suspensions using the R 6000 precision stirring shaft included in the scope of delivery
  • Breaking up agglomerates and microstructural homogenisation in vessels up to 20 litres
  • Intensive mixing cycles in cosmetics, paint and food development, where shear forces take precedence over sheer volume

Technical details

Drive & performance data
Motor principleBrushless DC motor (BLDC)
Motor power consumption176 watts
Motor power output125 watts
Max. power at the mixing shaft125 watts
Power consumption176 watts
Permissible duty cycle100 % (designed for continuous operation)
Voltage range100 to 240 V / frequency 50/60 Hz
Mixing & viscosity data
Max. mixing volume per mixing point (water)20 litres
Maximum viscosity10,000 mPas
Maximum torque at the stirring shaft40 Ncm
Maximum torque at 150 to 600 rpm40 Ncm
Max. torque at 600 to 6,000 rpm20 Ncm (linear adjustment)
Rated torque0.2 Nm
Speed & time control
Speed range150 to 6,000 rpm (revolutions per minute)
Speed adjustmentContinuously variable via electronic control
Setting accuracy for speed±1 rpm
Speed measurement deviation (n > 300 rpm)±1 %
Speed measurement deviation (n < 300 rpm)±3 rpm
Timer / counterYes, integrated (setting range 1 to 6,000 minutes) with LCD display
Reversible direction of rotation / intermittent operationNo / No
Metrology & interfaces
Speed display & timer displayDigital LCD display
Torque measurementIntegrated viscosity trend (trend mode)
Deviation in torque trend±6 Ncm
Wired interfacesUSB-C and RS232
Software compatibilitylabworldsoft
Temperature displayNo
Design & Geometry
Stirrer attachmentQuick-release chuck (clamping range: diameters 0.5 to 10 mm)
R 6000 precision stirring shaftIncluded in the scope of delivery (length 280 mm / max. immersion depth 220 mm)
Hollow shaft (can be inserted whilst stationary)Yes (internal diameter 11 mm)
Mounting on a standBoom rod (diameter 16 mm / length 220 mm)
Housing materialCoated cast aluminium and thermoplastic
Degree of protection according to DIN EN 60529IP 54 (splash- and steam-proof)
Dimensions (width x depth x height)89 x 191 x 306 mm
Net weight5.2 kg
Permissible ambient temperature+5 to +40 °C (relative humidity up to 80 %)

Scope of delivery

  • 1 x IKA EUROSTAR 20 high speed digital overhead stirrer (MPN 0020105160)
  • 1 x IKA R 6000 precision stirring shaft (length 280 mm)
  • 1 x Integrated boom rod for stand mounting
  • 1 x universal mains lead
  • 1 x Detailed operating instructions / safety guide

Individual requirements and procurement service

Compatible IKA system peripherals are available to equip the EUROSTAR 20 high speed digital stirring workstation:

  • Stand peripherals & mounting: Sturdy IKA telescopic stands (e.g. R 2722) and boss heads (e.g. R 270) for securing the 5.2-kilogram high-speed drive
  • Safety accessories: Suitable IKA stirring shaft guards to cover the rapidly rotating shaft in accordance with accident prevention regulations

Please make use of our technical procurement service for the application-specific configuration of your high-speed stirring stations.

Warranty

Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Skip product gallery

Matching accessories

Discount
IKA R 1405 propeller, Ø 45 mm, for EUROSTAR 20 & T 50, 0001289800
IKA R 1405 propeller, Ø 45 mm, for EUROSTAR 20 & T 50, 0001289800
Manufacturer number: 0001289800

High speed and gentle sample handling: the IKA R 1405 propeller In modern process engineering, chemical synthesis, cosmetics development and demanding food technology, laboratory technicians and researchers face a physical dilemma on a daily basis: how can low- to medium-viscosity liquids be mixed quickly and homogeneously at high speeds without the resulting frictional energy causing thermal degradation of the sample? Many conventional stirring elements and dispersing tools generate high shear forces during high-speed applications, which can lead to a rise in temperature within the medium. For temperature-sensitive samples, this is a disadvantage. According to IKA, the IKA R 1405 propeller (MPN 0001289800) is designed for low- to medium-viscosity media at high speed with a minimal rise in temperature. This stirring tool makes it possible to work at high speeds whilst reducing the thermal stress on your product. Fluid dynamics: the axial flow pattern The working principle of the IKA R 1405 propeller, which has a diameter of 45 millimetres, lies in its specific hydrodynamic blade geometry. Unlike radial agitators, which move the medium against the vessel wall, this propeller creates an axial flow pattern. This means that the liquid flows are pumped through the entire vessel volume parallel to the agitator shaft, from top to bottom (or vice versa, depending on the direction of rotation). The result is a high circulation capacity with low shear forces. This gentle circulation counteracts the settling of solids at the bottom of the vessel (suspension) and supports heat exchange within the sample. System compatibility: one tool, two device worlds The IKA R 1405 propeller is compatible with two classes of equipment in the IKA portfolio. On the one hand, it is a stirring element for the high-speed laboratory stirrers of the EUROSTAR 20 high speed series (digital and control). On the other hand, it can be coupled as an alternative mixing head to the T 50 digital dispersing drive (as an alternative to the R 1402 dissolver). (Please note: to mechanically connect the propeller head to the respective motor, you will need the appropriate intermediate shaft. For the EUROSTAR 20, this is the R 6000 precision stirring shaft; for the T 50 drive, it is the R 50 high-speed stirring shaft. These shafts act as adaptors and power transmitters). Scalability from laboratory to pilot scale When a new product is being developed in the research and development (R&amp;D) department, this usually takes place in small beakers. If the formulation works, the process must be scaled up to pilot scale quickly. The R 1405 propeller supports this critical scale-up process. With a specified operating range from 0.25 litres to 30 litres (based on the viscosity of water), one tool can be used in this range. You do not need to change the geometry of the agitator as the volume increases, which supports the reproducibility of your experimental data and reduces sources of error during scale-up (scale-up factor). Material and cleaning The IKA R 1405 propeller is made of stainless steel. The smooth surfaces and flow-optimised edges without blind spots make it harder for product residues to become trapped. The tool can be cleaned after use. It is a tool for users who want to use high mixing performance from their IKA high-speed drives while protecting the sample. Technical data Rotor diameter: 45 mm Working range (H₂O volume): 0.25 l to 30 l Flow pattern: Axial (high circulation performance, minimal shear forces) Thermal characteristics: According to IKA, designed for minimal temperature rise in the medium Application: Suitable for liquids with low to medium viscosities Compatibility (stirring systems): IKA EUROSTAR 20 high speed digital / control (only in conjunction with R 6000 stirrer shaft) Compatibility (dispersers): IKA T 50 digital (only in conjunction with high-speed stirrer shaft R 50) Material: Stainless steel Sterilisability/sterility: No (the tool is supplied unsterile) Scope of delivery 1 x IKA R 1405 propeller (Ø 45 mm) (Important note: The R 1405 propeller is a mixing head only. The required shafts (R 6000 or R 50) and the drive motor are not included in the scope of delivery!) Individual requirements &amp; accessories To put this tool into operation, you will need the matching adapter shaft, depending on the drive motor used. Are you using the EUROSTAR 20? Then don’t forget to add the R 6000 precision stirring shaft to your basket. Do you work with the T 50 disperser? Then the R 50 high-speed stirring shaft is suitable. We’d be happy to help you configure your system correctly. Simply contact our procurement service for personalised advice on your stirring process.

Sale price: €195.00 Manufacturer's RRP: €260.00 25% below manufacturer's RRP
Discount
IKA R 1402 Dissolver (toothed disc), Ø 42 mm, for EUROSTAR 20 & T 50, 0001243300
IKA R 1402 Dissolver (toothed disc), Ø 42 mm, for EUROSTAR 20 & T 50, 0001243300
Manufacturer number: 0001243300

High shear forces for demanding dispersions: the IKA R 1402 Dissolver In modern product development, the chemical industry, paint and varnish manufacturing, and sophisticated cosmetic formulation, the incorporation of fine powders into liquid media presents one of the greatest process engineering challenges. Whether they are colour pigments, high-molecular-weight thickeners, ceramic powders or active pharmaceutical ingredients (APIs), upon contact with the liquid surface, these solids tend to agglomerate. So-called agglomerates form, in which the outer particles are wetted but the inner core of the powder remains dry (often referred to as ‘fish eyes’). Conventional propeller or anchor stirrers inevitably reach their physical limits here. They merely move these viscous clumps in a circle through the vessel without breaking them up mechanically. The consequences include prolonged process times, defective product textures, reduced colour intensity in paints, or incomplete release of active ingredients in cosmetic creams. IKA has developed the R 1402 Dissolver for this problem area (MPN 0001243300). This high-speed mixing tool breaks up agglomerates and supports homogeneous, lump-free and well dispersed suspensions in a short time. The physics of comminution: the dissolver principle The technological heart of the IKA R 1402 is its dissolver disc (toothed disc) with a diameter of 42 millimetres. Unlike agitators, which are primarily designed for circulation, this dissolver head generates high local shear forces at high speeds. The teeth on the outer edge of the solid metal disc, which are alternately curved upwards and downwards, cut through the liquid medium at high speed. Turbulence and mechanical impact forces arise at the edges of these teeth. The powder-liquid mixture is accelerated radially outwards by the fluid dynamic profile, strikes the vessel wall and circulates back towards the agitator shaft. This kinetic energy breaks the agglomerate structures down into primary particles. The radial flow pattern and the high energy input support the incorporation of solids that are difficult to wet. The vortex effect in powder incorporation Another advantage of the IKA R 1402 Dissolver is the generation of a vortex (funnel). When the dissolver rotates at high speeds, a powerful suction force is created at the centre of the mixing vessel, reaching deep into the medium. If you now add your light, dusty powder to the surface of the liquid, it is immediately and directly sucked into the high-shear zone at the rotating toothed disc by this vortex. The powder does not float idly on the surface, where it could stick to the vessel wall, but is instantly wetted and integrated into the dispersion process. This feature is useful for a clean laboratory workflow when preparing stock solutions or paint batches. System integration and scale-up The IKA R 1402 Dissolver, like the R 1405 Propeller, is characterised by its cross-compatibility within the IKA product portfolio. It acts as a versatile mixing head for two different drives. You can operate it on the EUROSTAR 20 high-speed series laboratory stirrers (digital and control), but to do so you must use the R 6000 precision stirring shaft, which acts as an adapter. Alternatively, the tool can be coupled to the T 50 digital dispersing drive, for which the R 50 high-speed stirring shaft is required. Thanks to this modular design, laboratories can switch flexibly between gentle mixing (using the propeller) and aggressive dispersion (using the dissolver) without having to purchase entirely new equipment. With a working range from 0.25 to 30 litres (based on water), this tool is suitable for so-called scale-up. A formulation that you develop in R&amp;D in a small 500-ml beaker can be scaled up to a pilot scale of 20 or 30 litres using the same tool, which supports the transferability and validity of your process data across different scales. Hygiene and material quality When subjected to heavy-duty, continuous use with abrasive pigments, harsh chemical solvents or aggressive surfactants, a stirring tool should be robust. The IKA R 1402 Dissolver is made of stainless steel. The design of the toothed disc is also intended to reduce build-up of product residues in dead corners. Once the dispersion process is complete, the tool can be easily cleaned without leaving any residue under running water, in an ultrasonic bath or using suitable solvents. In strictly regulated quality management systems (such as GMP or GLP in the pharmaceutical industry), this can help to reduce cross-contamination (carry-over) between different sample batches. This is an original accessory from IKA. Technical data Tool principle: Dissolver disc (toothed disc) for radial flow Rotor diameter: 42 mm Working range (H₂O volume): 0.25 l to 30 l Main application: Breaking up agglomerates, powder incorporation, high-shear dispersion Compatibility (stirring systems): IKA EUROSTAR 20 high speed digital / control (only in conjunction with R 6000 stirring shaft) Compatibility (dispersers): IKA T 50 digital (only in conjunction with high-speed stirrer shaft R 50) Material: High-quality, chemically resistant and low-wear stainless steel Sterilisability/sterility: No (the tool is non-sterile) Scope of delivery 1 x IKA R 1402 Dissolver (toothed disc, Ø 42 mm) (Important note: The R 1402 dissolver is a mixing head only. The essential intermediate shafts (R 6000 or R 50) and the relevant drive unit are not included in the scope of delivery!) Individual requirements &amp; accessories To use this tool, please check your existing system for the correct shaft. For users of the EUROSTAR 20 drive, the R 6000 precision stirring shaft is required. If you are using the T 50 dispersing drive, please add the R 50 high-speed stirring shaft to your basket. If you have samples that are sensitive to temperature and would overheat due to the high shear forces of the dissolver, we recommend the IKA R 1405 propeller as a gentler alternative. Our procurement service is always available to assist you in configuring your stirring and dispersing system.

Sale price: €267.75 Manufacturer's RRP: €357.00 25% below manufacturer's RRP
Discount
IKA R 401 Stirrer shaft guard with hinge for overhead stirrers, 0020122349
IKA R 401 Stirrer shaft guard with hinge for overhead stirrers, 0020122349
Manufacturer number: 0020122349

The IKA R 401 stirrer shaft guard with hinge (MPN 0020122349) is a mechanical safety component for the safe and accident-free operation of overhead stirrers in the laboratory. During intensive mixing and homogenisation of viscous media, high kinetic forces act on the rotating stirring shafts. This professional shaft guard reliably protects laboratory staff from accidental contact with the rotating parts, effectively preventing clothing, hair or gloves from being drawn in. The guard is therefore an element in risk assessments and compliance with strict health and safety and accident prevention regulations (UVV). Ergonomic access thanks to an integrated hinge mechanism The design highlight of the R 401 model is its integrated, smooth-running hinge system. Unlike rigid protective covers, this hinged system architecture allows quick, unobstructed access to the drill chuck and the stirrer tool in use. Laboratory staff can carry out tool changes, adjustments to the immersion depth or cleaning tasks in a way that protects the material, without the need for time-consuming dismantling of the entire guard. This ensures a smooth workflow with high time efficiency in daily multi-user operation. Material stability and unrestricted process visibility The protective screen is made from a highly transparent, impact-resistant and specialised plastic material. This choice of material provides high chemical resistance to splashes of acids, alkalis or organic solvents. The material’s excellent optical clarity ensures that visual monitoring of the stirring process, transient flow patterns or any delayed boiling within the sample vessel remains unrestricted at all times. Technical details Design &amp; Material Product group: Laboratory accessories / Health and safety (Accessory) Protection principle: Mechanical barrier against rotating components Special feature: Integrated hinged flap for quick access to tools Protective screen material: Highly transparent, impact-resistant and chemical-resistant plastic Visibility: Unrestricted visual monitoring of the material being stirred Compatibility &amp; Installation System compatibility: Universally compatible with IKA EUROSTAR basic and control overhead stirrers Mounting method: Stable, vibration-free mounting directly onto the stand frame or the equipment mount Height adjustability: Flexibly adaptable to the respective vessel geometry and shaft length Scope of delivery 1 x IKA R 401 stirrer shaft guard with hinge (MPN: 0020122349) 1 x Complete set of fitting materials, including fasteners 1 x Quick guide / Safety guide for accident prevention Individual requirements &amp; accessories To set up a safe mixing workstation, we offer the complete range of original IKA system peripherals: Overhead stirrers: Optimised for the high-performance powerhouses of the IKA EUROSTAR 20, 40, 60, 100 or 200 series (both basic and control models). Stands &amp; boss heads: Extremely stable IKA telescopic stands (e.g. R 2723 or R 2722) and robust boss heads (e.g. R 270) for vibration-free securing of the entire experimental setup. Stirring tools: A wide-ranging B2B range of PTFE-coated and stainless steel stirring elements, such as propeller stirrers, anchor stirrers, paddle stirrers and dissolver discs. Make use of our technical procurement service to ensure the reliable design of your laboratory set-ups.

Sale price: €149.25 Manufacturer's RRP: €199.00 25% below manufacturer's RRP