IKA INC 125 FC digital refrigerated incubator, 125 litres, -5 to 100 °C, decontamination, 0020126186
€3,782.25
% Manufacturer's RRP: €5,043.00 25% below manufacturer's RRP
- Operating temperature: -5 to 100 °C with compressor cooling (refrigerant R290)
- 125 l internal capacity, up to 6 wire shelves, each with a load capacity of 20 kg
- Decontamination mode at 100 °C to reduce the risk of cross-contamination
- Temperature stability ±0.2 K, temperature uniformity ±0.3 K at 37 °C
- 3-year manufacturer’s warranty upon registration within 90 days
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA INC 125 FC digital refrigerated incubator, 125 litres, -5 to 100 °C, decontamination, 0020126186"
A microbiological culture rarely requires heat alone; it often also needs the ability to operate below room temperature or to safely decontaminate a chamber between two batches. The IKA INC 125 FC digital covers both requirements: compressor cooling using the refrigerant R290 gives an operating range of -5 to 100 °C, whilst a decontamination mode at 100 °C is also available.
Precise temperature control from -5 to 100 °C
At 37 °C and an ambient temperature of 22 °C, the unit maintains a temperature stability of ±0.2 K and a temperature uniformity of ±0.3 K inside the chamber, controlled via a 4-wire PT100 sensor with a setting and display resolution of 0.1 K. Under these conditions, the chamber heats up in 8 minutes; the recovery time after opening the door is 4 minutes. The heating power is 750 W, and energy consumption at 37 °C is approximately 79 Wh/h. A thermal safety device according to DIN 12880, Class TB 1, and a setpoint limiter with a safety cut-out protect the sample from accidental overheating.
125-litre interior and decontamination at 100 °C
The chamber has a capacity of 125 litres (550 x 550 x 415 mm) and accommodates up to six wire shelves, each with a load capacity of up to 20 kg. The inner walls and corners are rounded and made from corrosion-resistant AISI 304; an automatic defrost system with continuous water drainage (hose inner diameter 10 mm) keeps the chamber free from ice build-up. The decontamination mode heats the chamber to 100 °C, thereby reducing the risk of cross-contamination between different samples. An additional internal glass door allows the sample to be observed without any loss of temperature when the outer door is opened; the fan speed is electronically adjustable from 0 to 100 %.
Connections, stackability and safety
A USB-B interface allows connection to PC software for documentation; two T6.3A 250 V fuses protect the electronics. The degree of protection is IP 20 in accordance with DIN EN 60529, and the noise level is 51 dB(A). Up to two IKA incubators can be stacked using the appropriate accessories, for example an INC 125 FS or INC 125 F on top, which allows two temperature control tasks to be carried out simultaneously within a limited footprint. The door is optionally lockable, with the door hinge on the right and reversible.
Accessories for different loading configurations
In addition to the supplied wire shelves (IO T 1.00), IKA offers further shelf options for the INC 125 series, such as the perforated shelf (IO T 2.20) or the drip tray (IO T 2.30) for dripping or leaking vessels. A door lock (IO L 2.10) and a stacking kit (IO S 2.10) can be retrofitted if two units are to be operated one on top of the other, for example to physically separate cooling and standard incubation.
Typical applications
- Microbiological cultures requiring cooling to below room temperature
- Cell culture and sample storage requiring tight tolerances for temperature stability
- Decontamination of the chamber between changing batches or organisms
- Quality assurance with documented temperature control via USB
Technical details
| Operating temperature | -5 to 100 °C |
|---|---|
| Refrigerant | R290, charge 55 g, max. pressure 21 bar |
| Heating power | 750 W |
| Temperature stability / uniformity (37 °C @22 °C) | ±0.2 K / ±0.3 K |
| Heating time / recovery time (37 °C @22 °C) | 8 min / 4 min |
| Total internal chamber volume | 125 l |
| Internal chamber working area (W x H x D) | 550 x 550 x 415 mm |
| Max. number of wire shelves / load per wire shelf | 6 / 20 kg |
| Thermal safety device | DIN 12880, TB Class 1 |
| Energy consumption at 37 °C | 79 Wh/h |
| USB interface | USB-B |
| Noise level | 51 dB(A) |
| Dimensions (W x H x D) | 700 x 1,000 x 635 mm |
| Weight | 80 kg |
| Connected load | 220 to 240 V, 50/60 Hz, 950 W (max. 1,000 W) |
| Degree of protection | IP 20 (DIN EN 60529) |
Scope of delivery
- 1 x INC 125 FC digital refrigerated incubator
- 2 x IO T 1.00 wire shelf, chrome-plated
- 2 x anti-tip devices / fixing materials
- 1 x USB A-to-B cable
- 1 x calibration certificate at 37 °C and 0 °C
- 1 x hose adapter (for hoses Ø 9 to 11 mm)
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Selection guide and service
If you do not require active cooling and only work at temperatures above room temperature, the compressor-free IKA INC 125 F digital is usually sufficient, provided it has the same internal volume and footprint. The INC 125 FC digital described here is worthwhile as soon as samples need to be maintained below room temperature, down to minus 5 °C. As an electrical appliance, the incubator is subject to the WEEE Directive and must not be disposed of with household waste at the end of its life. IKA provides a 2-year manufacturer’s warranty, which is extended to 3 years if the appliance is registered at ika.com/register within 90 days of purchase. Through our procurement service, we can assist you with shelves, stacking kits and other accessories.