IKA myPlate, magnetic stirrer without heating, customisable glass surface, 0025005156
€317.25
% Manufacturer's RRP: €423.00 25% below manufacturer's RRP
- Magnetic stirrer without a heating function for thermolabile samples
- Customisable interchangeable frame beneath the glass plate
- Stirring volume up to 1.5 L
- Speed up to 2,500 rpm
- Solid real glass base with a diameter of 135 mm
- Capacitive touch slider and digital LED display
- Degree of protection IP 54: protected against dust and splashing water
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA myPlate, magnetic stirrer without heating, customisable glass surface, 0025005156"
Drive and speed
Aqueous or low-viscosity media can be mixed on a laboratory scale with a compact magnetic stirrer. The IKA myPlate is a magnetic stirrer without heating for a stirring volume of up to 1.5 L (based on water). The speed can be set continuously from 0 to 2,500 revolutions per minute, and a rotating magnetic field in the unit drives the stir bar in the vessel. At high speed, a flow funnel (vortex) can form in the vessel. The flow supports mixing and reduces dead zones in the beaker or Erlenmeyer flask.
Glass surface and interchangeable frame
The large standing surface (Ø 135 mm) is made of hardened real glass. The glass is resistant to many chemicals, acids and alkalis that can attack some plastic housings if spilled. Exceptions include hydrofluoric acid and hot concentrated alkalis. The device has an integrated interchangeable frame that can be removed without tools. It allows the surface to be personalised with individual printed media. The device has no heating, so the standing surface is not actively heated.
Capacitive operation
The device has an electronically commutated motor (EC motor). The motor works without sliding contacts, the power consumption is 4 W and the device is designed for continuous operation. The device is operated via a capacitive sensor keypad (touch slider), and a digital LED display shows the speed. The speed is adjusted in steps by swiping.
Technical details
Kinematics & Fluid Mechanics
- Process principle: Electromagnetic rotation
- Maximum stirring volume (H₂O): 1.5 L
- Speed range: 0 – 2,500 rpm
- Speed display: Digital LED display
- Speed adjustment: Capacitive touch slider
- Maximum stir bar length: 30 mm
- Motor power input / output: 4 W / 2 W
- Motor type: Electronically commutated DC motor (EC motor)
Materials Science & Systems Architecture
- Base material: Tempered real glass (amorphous silicate matrix)
- Modular design: Integrated interchangeable frame for visual customisation
- Base dimensions: Ø 135 mm
- System dimensions (W x H x D): 152 x 30 x 164 mm
- Machine weight: 0.5 kg
- Housing material: High-performance plastic with real glass cover
Safety & environmental conditions
- Permissible ambient temperature range: 5 – 40 °C
- Permissible relative humidity: max. 80 %
- IP rating (to DIN EN 60529): IP 54 (protection against dust and splashing water)
- Thermal influence: No heating function
Electrical & Infrastructure
- Voltage / frequency (mains adaptor): 100 – 240 V / 50/60 Hz
- DC input on the unit: 12 V
- Current consumption: 300 mA
Scope of delivery
- 1 x IKA myPlate magnetic stirrer
- 1 x mains power supply (including adapter)
- 1 x blank paper insert for personalisation
Important note: A magnetic stir bar is required for operation and is not included in the scope of delivery. Stir bars up to 30 mm in length are permitted.
Warranty
Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Individual requirements & accessories
The IKA myPlate generates a rotating magnetic field but, without a suitable rotor, does not induce any mechanical flow vectors. For maximum efficiency in 1.5 L beakers, we recommend using cylindrical, PTFE-coated IKAFLON magnetic stir bars (max. 30 mm in length). To retrieve the magnetic stir bars without contamination after homogenisation, you will also need a PTFE magnetic stir bar retriever. Please contact our procurement service at any time for the fluid-dynamically correct configuration of your stirring setup.