Macherey-Nagel glass fibre filter circles MN GF-1, 0.7 µm

Product information "Macherey-Nagel glass fibre filter circles MN GF-1, binder-free, 0.7 µm (Ø 25–270 mm), 125 mm"

The Macherey-Nagel MN GF-1 glass fibre filter circles filter quickly while retaining particles from 0.7 µm. According to the data sheet, the filtration speed is 12 s. This is shorter than for the MN 85/90 and MN 85/70 at 15 s each and for the MN GF-3 at 25 s. The filter consists of borosilicate glass microfibres without binder, is 0.28 mm thick and weighs 52 g/m².

Glass fibre filter circles with short filtration time

Macherey-Nagel describes the GF-1 as a glass fibre filter with fast filtration and very good retention for highly efficient laboratory filtration and air sampling. The average retention capacity of 0.7 µm is above that of the MN GF-3 and MN 85/70 at 0.6 µm each and of the MN 85/90 at 0.5 µm. If you mainly want to save time and 0.7 µm is sufficient, the GF-1 is suitable. For a finer filtrate, the MN GF-3 is an option.

Up to 500 °C without binder

Without a binder, the GF-1 withstands up to 500 °C according to the data sheet. The types with binder, MN 85/90 and MN 85/70, are rated up to 200 °C and, according to Macherey-Nagel, have comparatively high mechanical stability. The GF-1 is the type to choose when speed and temperature matter more than this additional strength.

Typical applications

Laboratory filtration with high throughput where a retention capacity of 0.7 µm is sufficient
Air sampling in which particles are collected on the filter
Filtration of samples with a high solids content, for which Macherey-Nagel attributes a good loading capacity to the GF-1
Gravimetric determinations with drying or ignition in an oven at up to 500 °C

Available diameters

13 diameters from 25 to 270 mm are available, with 100 filters per pack. Choose the diameter to match your funnel, filter holder or sampling device. The table lists the manufacturer’s item number for each size.

Diameter	Pieces per pack	MPN
25 mm	100	4110025
37 mm	100	4110037
45 mm	100	4110045
47 mm	100	4110047
55 mm	100	411005
70 mm	100	411007
90 mm	100	411009
110 mm	100	411011
125 mm	100	411012
150 mm	100	411015
185 mm	100	411018
240 mm	100	411024
270 mm	100	411027

Technical details

All figures are typical values according to Macherey-Nagel and not a specification.

Type	MN GF-1
Material	Borosilicate glass microfibres
Binder	none
Average retention capacity	0.7 µm
Grammage	52 g/m²
Thickness	0.28 mm
Filtration speed	12 s
Maximum temperature	500 °C
Surface	smooth
Colour	white
Shape	filter circle
Diameter	25 to 270 mm
Pack contents	100 pieces

Scope of delivery

1 pack containing 100 MN GF-1 glass fibre filter circles in the selected diameter

Individual requirements and procurement service

Büchner funnels, filter holders, suction flasks, filter tweezers and vacuum pumps are also available. Enquiries about accessories, other types or larger quantities are handled by our procurement service.

Diameter:	125 mm