Sauter HDD 100-1 digital Shore hardness tester Shore D, 100 HD / 0.1 HD
€378.00
% Manufacturer's RRP: €420.00 10% below manufacturer's RRP
- Digital Shore hardness tester, Shore D scale, measuring range 100 HD, readability 0.1 HD
- Backlit LCD, average, hold, peak and zero
- Measurement accuracy 1 % of the final value, test object thickness from 6 mm
- RS-232 interface, batteries (2 x AAA) included in the scope of delivery
- Can be mounted on the TI-DL test stand (Shore D, 50 N)
- Supplied in a carrying case
Product information "Sauter HDD 100-1 digital Shore hardness tester Shore D, 100 HD / 0.1 HD"
The Sauter HD are digital Shore hardness testers with LCD for determining the hardness of plastics by indentation measurement. There are two models: the HDA 100-1 for Shore A (rubber, elastomers, soft plastics) and the HDD 100-1 for Shore D. Both have a readability of 0.1 and run on two AAA batteries supplied as standard. The measured values can be transferred to a PC via RS-232.
Display and functions
The large LCD screen is backlit and displays the battery charge level. The device can calculate averages, hold measured values (Hold) and record peak values (Peak). The zero function resets the display to zero. The automatic switch-off function can be deactivated, in which case the device operates continuously. According to Kern, the measurement accuracy is 1 % of the final value; the test object must be at least 6 mm thick.
External adjustment and comparison measurements
Accuracy can be adjusted using an external adjustment weight. Kern recommends the HD primarily for internal comparison measurements, as, according to Kern, calibrations according to standards are not possible due to very tight standard tolerances. Anyone comparing measured values from different inspectors or batches should therefore always use the same instrument and the same measurement method.
Test stand and data transmission
Both devices can be mounted on a Sauter test stand: the HDA 100-1 on the TI-ACL (Shore A, test force 10 N), and the HDD 100-1 on the TI-DL (Shore D, test force 50 N). The test stands are also available. The RS-232 interface transmits the values to a PC, for example into a spreadsheet programme such as Microsoft Excel. The ATC-01 software for data transfer is available as an accessory.
Typical applications
- Plastics engineering: hardness determination of plastic and elastomer parts using indentation measurement
- Medical technology: hardness testing of elastomer components
- Automotive industry: hardness testing of seals, hoses and rubber components
- Packaging industry: hardness testing of plastics and sealing materials
- Food industry: hardness testing of seals and plastic components
According to Kern, Shore A is used for rubber, elastomers, neoprene, silicone, vinyl, soft plastics, felt, leather and similar materials. For harder plastics, the HDD 100-1 with Shore D is used. If you need special functions such as limit value alarm, measuring time and memory, you will find them in the HE series, which is also available.
Models at a glance
| Model | Hardness scale | Test force | Measuring range | Readability | Suitable test stand | Batteries |
|---|---|---|---|---|---|---|
| HDA 100-1 | Shore A | 10 N | 100 HA | 0.1 HA | TI-ACL | Alkaline-manganese, 2 x AAA (1.5 V) |
| HDD 100-1 | Shore D | 50 N | 100 HD | 0.1 HD | TI-DL | Alkaline-manganese, 2 x AAA (1.5 V) |
Technical details
These values apply to both models. Deviating values are given in the model table.
| Display | Backlit LCD |
| Measurement accuracy | 1 % of the final value |
| Measuring probe | Ø 18 mm |
| Test object minimum thickness | 6 mm |
| Functions | Averaging, hold, peak, zero |
| Adjustment | external, with adjustment weight |
| Interface | RS-232 |
| Power supply | 2 AAA batteries (1.5 V), alkaline-manganese, included in the scope of delivery |
| Switch-off | Choice of auto-off or continuous operation, battery level indicator |
| Housing | Plastic, 162 x 65 x 38 mm (W x D x H) |
| Ambient temperature | 0 °C to 50 °C |
| Storage temperature | -10 °C to 40 °C |
| Net weight | approx. 0.20 kg |
| Warranty (manufacturer) | 24 months according to Kern, excluding wear parts |
Scope of delivery
- Sauter HD Shore hardness tester (HDA 100-1 or HDD 100-1, depending on the model)
- 2 AAA batteries (1.5 V)
- Carrying case
Warranty
According to Kern & Sohn, these devices come with a 2-year warranty. Kern grants 3 years on products with a list price of €500 or more and 2 years on products below that and on components; wear parts such as batteries and rechargeable batteries are excluded. Warranty repairs are carried out by Kern or by a Kern dealer.
Downloads
Operating instructions Sauter HD (PDF)Regulatory information
As electrical devices, the hardness testers fall under the ElektroG. The manufacturer Kern & Sohn GmbH is registered under the WEEE registration number DE 80821200. How to return old appliances is described on the page Environment and disposal.
Individual requirements and procurement service
The TI-ACL (Shore A) and TI-DL (Shore D) Shore test stands, the AHBA-01 (Shore A) and AHBD-01 (Shore D) hardness reference plates, and the ATC-01 software are also available. Enquiries are handled via our procurement service.
| Design: | HDD 100-1 · Shore D |
|---|