Skip to main content Skip to search Skip to main navigation

Bandelin SONOREX DIGITEC DT 255 H ultrasonic bath with heating, 5.5 litres, 3240

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Bandelin SONOREX DIGITEC DT 255 H ultrasonic bath with heating, 5.5 litres, 3240"

The Bandelin SONOREX DIGITEC DT 255 H is a professional, digitally controlled ultrasonic bath designed for intensive use in laboratories and medical practices. With a capacity of 5.5 litres (3.8 L working volume), it is suitable for the rapid and thorough cleaning of longer laboratory instruments, pipettes or glassware.

Digital control and SweepTec® for reproducible results

At the heart of this unit is the ‘DIGITEC’ control system with a clear LED display showing time (1 to 30 min or continuous operation) and temperature. One important feature is the SweepTec® technology. It ensures a continuous shift in the ultrasonic pressure peaks within the bath. This prevents ‘standing waves’ (hot spots), protects sensitive items being cleaned (e.g. thin glass) and supports homogeneous and gentle cleaning throughout the entire ultrasonic bath.

Integrated heater (H)

The ‘H’ in the model name stands for the powerful, thermostatically controlled heating system (20 to 80 °C). This supports the effectiveness of cleaning chemicals (e.g. STAMMOPUR) and can speed up the cleaning process.

Robust and durable construction

The oscillating tank is made from robust, cavitation-resistant stainless steel. The housing is also made from stainless steel and is easy to clean. This model (MPN 3240) is suitable for users who require full digital performance without the need for remote control or process documentation (infrared interface).

Technical details

  • Capacity: 5.5 litres
  • Working capacity: 3.8 litres
  • Inner tank dimensions (L x W x D): 300 x 150 x 150 mm
  • Ultrasonic frequency: 35 kHz
  • Ultrasonic peak power: 640 W
  • Nominal ultrasonic power: 160 W
  • Heating power: 280 W
  • Heating range: 20 to 80 °C (adjustable)
  • Timer: 1 to 30 min (in increments of 1, 2, 3, 4, 5, 10, 15, 30) & continuous operation (∞)
  • Technology: SweepTec®
  • Material (tank/housing): Stainless steel 1.4301
  • Drain: Yes (G ¼ ball valve, right-hand side)
  • Housing protection rating: IP 33

Scope of delivery

  • SONOREX DIGITEC DT 255 H (main unit)
  • Mains cable (permanently attached to the unit, 2 m)
  • Operating instructions
  • Note: The basket (insert basket) and lid are accessories and are not included in the scope of delivery.

Individual requirements & procurement service

The insert basket (e.g. K 6) and the lid (D 150) are available as accessories. Do you need advice on these accessories or the appropriate STAMMOPUR cleaning concentrates? Our team of experts will be happy to help. For accessories or spare parts not listed here, please use our individual procurement service.

Volume: 5.5 l
Skip product gallery

Matching accessories

Discount
Bandelin SONOREX SM 5 Silikon-Noppenmatte für SUPER RK und DIGITEC DT
Bandelin SONOREX SM 5 silicone studded mat for SUPER RK and DIGITEC DT
Manufacturer number: 101

The SM 5 is the silicone studded mat for the K 5 C insert basket. According to Bandelin, instruments can be placed on it in the basket easily and without scratching. The mat measures 213 x 97 mm.On CE conformity, Bandelin gives Class I medical devices according to Regulation (EU) 2017/745. It is intended for 12 models of the SUPER RK and DIGITEC DT series. The K 5 C insert basket is not included in the scope of delivery and is needed in addition.Typical applicationsTypical uses in the compatible units:Instrument cleaning in practices, clinics and sterilisation departments in the RK 255 HHeat-assisted cleaning of instruments in the RK 510 HPre-cleaning of larger instrument batches before further reprocessing in the RK 510Whether an instrument is suitable for ultrasonic cleaning depends on the instrument manufacturer’s specifications.Suitable forModelBandelin device no.Tank volume (l)DT 25532155.5DT 255 H32405.5DT 51032459.7DT 510 H32069.7DT 514325013.5DT 514 H321113.5RK 25530665.5RK 255 H3165.5RK 5103279.7RK 510 H3219.7RK 51427713.5RK 514 H20713.5Technical detailsMaterialSiliconeDimensions (L x W)213 x 97 mmCompatible insert basketK 5 CScope of delivery1 SONOREX SM 5 silicone studded matIndividual requirements & procurement serviceFor the K 5 C insert basket, further mats and questions about compatibility with older SONOREX units, our procurement service accepts enquiries.

Sale price: €101.91 Manufacturer's RRP: €129.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX DE 255 Lochdeckel für SUPER RK und DIGITEC DT
Bandelin SONOREX DE 255 perforated lid for SUPER RK and DIGITEC DT
Manufacturer number: 3028

The DE 255 perforated lid is made of stainless steel and holds insert beakers in the ultrasonic bath. Because nothing may lie on the tank bottom during operation, the beakers are hung in the lid. Different liquids can be sonicated at the same time in several beakers. The perforated lid is intended for 4 models of the SONOREX SUPER RK and DIGITEC DT series.According to Bandelin, PD 06, SD 06, SD 09 and EB 05 fit as insert beakers; they are also available. The perforated lid measures 328 x 147 x 11 mm on the outside. According to Bandelin, it dampens sound and shortens the heating-up phase on heated units. The tanks of the compatible units hold 5.5 litres.Typical applicationsTypical uses in the compatible units:Homogenisation and emulsificationSample preparation for analysisSonochemical applications, such as radical generation or improved mass transferSuitable forModelBandelin device no.Tank volume (l)SONOREX SUPER RK 25530665.5SONOREX SUPER RK 255 H3165.5SONOREX DIGITEC DT 25532155.5SONOREX DIGITEC DT 255 H32405.5Technical detailsMaterialStainless steelExternal dimensions (L x W x H)328 x 147 x 11 mmScope of delivery1 SONOREX DE 255 stainless steel perforated lidIndividual requirements & procurement serviceInsert beakers and further perforated lids for SONOREX ultrasonic baths can be requested via the procurement service.

Sale price: €48.19 Manufacturer's RRP: €61.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX D 255 Deckel für SUPER RK und DIGITEC DT
Bandelin SONOREX D 255 lid for SUPER RK and DIGITEC DT
Manufacturer number: 3007

The D 255 stainless steel lid is intended for 4 ultrasonic baths of the SONOREX SUPER RK and DIGITEC DT series. Under the lid, the bath liquid stays protected from external contamination. During operation the noise emission falls, and any condensation that forms runs back into the tank.The tanks of the compatible units hold 5.5 litres. According to Bandelin, the lid also shortens the heating-up phase on units with heating. According to Bandelin, it prevents odour nuisance when cleaning or disinfecting agents are added. The K 5 C insert basket is also available.Typical applicationsTypical uses in the compatible units:Degassing of solvents and aqueous media prior to sensitive analytical processesRemoval of stubborn residues such as dried-on samples or grease from tools and small partsPre-cleaning of components before further reprocessingSuitable forModelBandelin device no.Tank volume (l)SONOREX SUPER RK 25530665.5SONOREX SUPER RK 255 H3165.5SONOREX DIGITEC DT 25532155.5SONOREX DIGITEC DT 255 H32405.5Technical detailsMaterialStainless steelScope of delivery1 SONOREX D 255 stainless steel lidIndividual requirements & procurement serviceThe procurement service clarifies compatibility with older or unlisted SONOREX ultrasonic baths and accepts enquiries about accessories.

Sale price: €46.61 Manufacturer's RRP: €59.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX K 5 C Einhängekorb für SUPER RK und DIGITEC DT
Bandelin SONOREX K 5 C insert basket for SUPER RK and DIGITEC DT
Manufacturer number: 3027

The K 5 C insert basket holds the items to be sonicated in 4 ultrasonic baths of the SONOREX SUPER RK and DIGITEC DT series. During operation nothing may lie on the tank bottom, because abrasion can occur between the items being sonicated and the oscillating tank. According to Bandelin, the basket holds the parts in the optimum range of the cavitation field, 1 to 2 cm above the bottom. For rinsing, it can be taken out without coming into contact with the sonication liquid.The basket is made of stainless steel and has handles. Inside it measures (L x W x D) 260 x 110 x 40 mm, the mesh size is 5 x 5 mm and it carries up to 5 kg. The compatible tanks hold 5.5 litres. The D 255 lid is also available.Typical applicationsTypical uses in the compatible units:Instrument cleaning in practices, clinics and sterilisation departmentsCleaning of laboratory glassware, pipettes, cuvettes and other small partsRemoval of stubborn residues such as dried-on samples or grease from tools and small partsWhether an instrument is suitable for ultrasonic cleaning depends on the instrument manufacturer’s specifications.Suitable forModelBandelin device no.Tank volume (l)SONOREX SUPER RK 25530665.5SONOREX SUPER RK 255 H3165.5SONOREX DIGITEC DT 25532155.5SONOREX DIGITEC DT 255 H32405.5Technical detailsMaterialStainless steelInternal dimensions (L x W x D)260 x 110 x 40 mmMesh size5 x 5 mmPayloadup to 5 kgScope of delivery1 SONOREX K 5 C insert basketIndividual requirements & procurement serviceA lid in a suitable size, a different basket or accessories for older SONOREX units can be requested via the procurement service.

Sale price: €69.52 Manufacturer's RRP: €88.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX KW 5 Einhängewanne mit Deckel für SUPER RK und DIGITEC DT
Bandelin SONOREX KW 5 hanging tray with lid for SUPER RK and DIGITEC DT
Manufacturer number: 240

The KW 5 hanging tray is made of polyethylene and has a lid. Its internal dimensions are 254 x 96 x 130 mm. Because nothing may lie on the tank bottom during operation, there are plastic hanging trays with lids for this purpose. According to Bandelin, the tray is temperature-resistant up to 80 °C with water and up to 60 °C with acids. A cleaning solution serves as the coupling liquid in the ultrasonic bath.According to Bandelin, the tray is intended for chemically aggressive liquids and protects the stainless steel tank of the ultrasonic bath. The cleaning solution must reduce the surface tension of the water so that the ultrasound is transmitted. The tray is intended for 4 models of the SONOREX SUPER RK and DIGITEC DT series, whose tanks hold 5.5 litres.Typical applicationsTypical uses:Sample preparation for analysisHomogenisation and emulsificationSonication of chemically aggressive liquids, with the stainless steel tank of the ultrasonic bath remaining protectedSuitable forModelBandelin device no.Tank volume (l)SONOREX SUPER RK 25530665.5SONOREX SUPER RK 255 H3165.5SONOREX DIGITEC DT 25532155.5SONOREX DIGITEC DT 255 H32405.5Technical detailsMaterialPolyethylene (HD-PE)Internal dimensions (L x W x D)254 x 96 x 130 mmExternal dimensions (L x W x H)342 x 180 x 130 mmScope of delivery1 SONOREX KW 5 polyethylene hanging tray with lidIndividual requirements & procurement serviceThe procurement service accepts enquiries about lids, perforated lids and insert beakers for the SONOREX ultrasonic baths.

Sale price: €81.37 Manufacturer's RRP: €103.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX EK 250 Aufnahmeklammer für SONOREX Ultraschallbäder
Bandelin SONOREX EK 250 holding clamp for SONOREX ultrasonic baths
Manufacturer number: 3259

The EK 250 holding clamp is made of stainless steel and intended for laboratory flasks up to d = 85 mm. It is used for tip-proof sonication of laboratory flasks in the SONOREX ultrasonic bath. It is fastened in insert baskets and instrument holders. Bandelin states that laboratory flasks do not float up or tip over with the clamp.For smaller flasks, the clamps EK 100 (up to d = 65 mm), EK 50 (up to d = 52 mm), EK 25 (up to d = 42 mm) and EK 10 (up to d = 31 mm) are also available. The insert basket or instrument holder is not included in the scope of delivery.Typical applicationsTypical uses in the compatible units:Sample preparation for analysis in the DT 510 HRapid degassing of liquids in the DT 514 HHomogenisation and emulsification in the DT 255Suitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 25532155.5DT 255 H32405.5DT 51032459.7DT 510 F132424.3DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 25530665.5RK 255 H3165.5RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Technical detailsMaterialStainless steelLaboratory flasksup to d = 85 mmFasteningin insert baskets and instrument holdersScope of delivery1 SONOREX EK 250 stainless steel holding clampIndividual requirements & procurement serviceFor clamps of other sizes, insert baskets and instrument holders, our procurement service accepts enquiries.

Sale price: €51.35 Manufacturer's RRP: €65.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX GR 06 Gummiring für SONOREX Ultraschallbäder
Bandelin SONOREX GR 06 rubber ring for SONOREX ultrasonic baths
Manufacturer number: 7505

According to Bandelin, the GR 06 rubber ring fits the SD 06, SD 09, EB 05 and PD 06. Bandelin lists it as a rubber ring for insert beakers. The model table shows the SONOREX ultrasonic baths in which these parts are intended. These are 47 models of the SUPER RK, DIGITEC DT and smart ST series. The insert beakers are not included in the scope of delivery.Typical applicationsAccording to Bandelin, insert beakers are used for indirect sonication in these cases:when using chemically aggressive liquidswhen removing chemically aggressive or abrasive contaminantswhen sonicating sample liquidsSuitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 1050 CH327190.0DT 10632705.6DT 15632756.0DT 156 BH32219.0DT 25532155.5DT 255 H32405.5DT 51032459.7DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 105032358.0RK 1050 CH18490.0RK 1063065.6RK 1563056RK 156 BH6469.0RK 25530665.5RK 255 H3165.5RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Scope of delivery1 SONOREX GR 06 rubber ringIndividual requirements & procurement serviceFor insert beakers, further rubber rings and questions about assignment to a particular SONOREX unit, our procurement service accepts enquiries.

Sale price: €9.48 Manufacturer's RRP: €12.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX EK 10 Aufnahmeklammer für SONOREX Ultraschallbäder
Bandelin SONOREX EK 10 holding clamp for SONOREX ultrasonic baths
Manufacturer number: 7521

The EK 10 holding clamp is intended for laboratory flasks up to d = 31 mm. It is made of stainless steel and is used for tip-proof sonication in the SONOREX ultrasonic bath. It is fastened in insert baskets and instrument holders. According to Bandelin, the clamp prevents laboratory flasks from floating up or tipping over.For larger flasks, the EK 25 (up to d = 42 mm), EK 50 (up to d = 52 mm), EK 100 (up to d = 65 mm) and EK 250 (up to d = 85 mm) are also available. The insert basket or instrument holder is not included in the scope of delivery.Typical applicationsTypical uses in the compatible units:Homogenisation and emulsification of small quantities in the DT 31Sample preparation for analysis in the DT 31 HUniform indirect sonication of samples, including in laboratory flasks, in the DT 510 F SetSuitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 25532155.5DT 255 H32405.5DT 3132000.9DT 31 H32200.9DT 51032459.7DT 510 F132424.3DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 25530665.5RK 255 H3165.5RK 313290.9RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Technical detailsMaterialStainless steelLaboratory flasksup to d = 31 mmFasteningin insert baskets and instrument holdersScope of delivery1 SONOREX EK 10 stainless steel holding clampIndividual requirements & procurement serviceFor insert baskets, instrument holders and clamps for larger flasks, our procurement service accepts enquiries.

Sale price: €28.44 Manufacturer's RRP: €36.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX EK 100 Aufnahmeklammer für SONOREX Ultraschallbäder
Bandelin SONOREX EK 100 holding clamp for SONOREX ultrasonic baths
Manufacturer number: 7516

The EK 100 stainless steel holding clamp is available for laboratory flasks up to d = 65 mm. It allows tip-proof sonication of laboratory flasks in the SONOREX ultrasonic bath. The clamp is fastened in insert baskets and instrument holders. According to Bandelin, it prevents laboratory flasks from floating up or tipping over.For larger flasks there is the EK 250 (up to d = 85 mm), for smaller ones the EK 50 (up to d = 52 mm), EK 25 (up to d = 42 mm) and EK 10 (up to d = 31 mm). All are also available. The insert basket or instrument holder is not included in the scope of delivery.Typical applicationsTypical uses in the compatible units:Uniform indirect sonication of samples, including in laboratory flasks, in the DT 510 F SetSonochemical applications in the DT 52 HSample preparation for analysis in the DT 102 HSuitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 25532155.5DT 255 H32405.5DT 3132000.9DT 31 H32200.9DT 51032459.7DT 510 F132424.3DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 25530665.5RK 255 H3165.5RK 313290.9RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Technical detailsMaterialStainless steelLaboratory flasksup to d = 65 mmFasteningin insert baskets and instrument holdersScope of delivery1 SONOREX EK 100 stainless steel holding clampIndividual requirements & procurement serviceFor clamps of other sizes and for questions about compatibility with older SONOREX units, our procurement service accepts enquiries.

Sale price: €36.34 Manufacturer's RRP: €46.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX EK 50 Aufnahmeklammer für SONOREX Ultraschallbäder
Bandelin SONOREX EK 50 holding clamp for SONOREX ultrasonic baths
Manufacturer number: 7518

The EK 50 is a stainless steel holding clamp for laboratory flasks up to d = 52 mm. It holds laboratory flasks tip-proof in the SONOREX ultrasonic bath and is fastened in insert baskets or instrument holders. According to Bandelin, the clamp prevents laboratory flasks from floating up and tipping over.Larger flasks are taken by the EK 100 (up to d = 65 mm) and the EK 250 (up to d = 85 mm), smaller ones by the EK 25 (up to d = 42 mm) and the EK 10 (up to d = 31 mm). These sizes are also available. The insert basket and instrument holder are not included in the scope of delivery.Typical applicationsTypical uses in the compatible units:Homogenisation and emulsification in the DT 52 HRapid degassing of liquids in the DT 52Sonochemistry, for example radical generation or improved mass transfer, in the DT 103 HSuitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 25532155.5DT 255 H32405.5DT 3132000.9DT 31 H32200.9DT 51032459.7DT 510 F132424.3DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 25530665.5RK 255 H3165.5RK 313290.9RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Technical detailsMaterialStainless steelLaboratory flasksup to d = 52 mmFasteningin insert baskets and instrument holdersScope of delivery1 SONOREX EK 50 stainless steel holding clampIndividual requirements & procurement serviceIf you need clamps for several flask sizes, you can enquire with the procurement service, as you can about insert baskets and instrument holders.

Sale price: €33.18 Manufacturer's RRP: €42.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX FT 4 Folientest-Rahmen für SUPER RK, DIGITEC DT und smart ST
Bandelin SONOREX FT 4 foil test frame for SUPER RK, DIGITEC DT and smart ST
Manufacturer number: 3074

The FT 4 foil test frame measures 160 x 200 mm and is made of stainless steel. Bandelin lists it as suitable for tanks with internal dimensions from 240 x 140 x 80 mm to 300 x 150 x 150 mm. It is intended for 16 models of the SUPER RK, DIGITEC DT and smart ST series.The foil test according to IEC 886 is used to test an ultrasonic cleaner. An aluminium foil is inserted for this purpose, and cavitation perforates or destroys it to a certain degree, depending on the duration. The suitable FL 4 aluminium foil with a thickness of 15 µm is also available. It is not included in the scope of delivery.Typical applicationsBandelin names the foil test in these cases:Testing at the first commissioning of the ultrasonic cleanerRepetition at regular intervals after a corresponding period of operation, for example every three monthsProcess verification, for example during the reprocessing of medical devicesThe foils can be scanned or photographed and archived. This keeps a comparison over time possible.Suitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 103 H32014.0DT 10632705.6DT 25532155.5DT 255 H32405.5RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 103 H3264.0RK 1063065.6RK 25530665.5RK 255 H3165.5ST 102 H71003.0ST 103 H71014Technical detailsMaterialStainless steelFrame dimensions (L x W)160 x 200 mmCompatible internal tank dimensions (L x W x D)240 x 140 x 80 mm to 300 x 150 x 150 mmCompatible foilFL 4, thickness 15 µmScope of delivery1 SONOREX FT 4 stainless steel foil test frameIndividual requirements & procurement serviceFor the suitable foil, further foil test frames and questions about which frame belongs to a particular tank, our procurement service accepts enquiries.

Sale price: €22.91 Manufacturer's RRP: €29.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX DD 06 Kunststoffdeckel für SONOREX Ultraschallbäder
Bandelin SONOREX DD 06 plastic lid for SONOREX ultrasonic baths
Manufacturer number: 350

The DD 06 plastic lid closes an insert vessel. It fits the SD 06, EB 05 and PD 06. The assignment to the ultrasonic baths results from these insert vessels; there are 47 models of the SUPER RK, DIGITEC DT and smart ST series. The insert vessels are not included in the scope of delivery.According to Bandelin, it protects the cleaning liquid from contamination from outside and prevents odour nuisance caused by added cleaning or disinfection preparations. Bandelin states that the lid directs any condensation that forms back into the tank.Typical applicationsTypical cases in which the lid sits on the insert vessel:Sonication with added cleaning or disinfection preparations when odour is to be avoidedSonication in the insert vessel when the liquid is to stay protected from contamination from outsideSonication in which condensation forms and is to run back into the tankSuitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 1050 CH327190.0DT 10632705.6DT 15632756.0DT 156 BH32219.0DT 25532155.5DT 255 H32405.5DT 51032459.7DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 105032358.0RK 1050 CH18490.0RK 1063065.6RK 1563056RK 156 BH6469.0RK 25530665.5RK 255 H3165.5RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Technical detailsMaterialPlasticScope of delivery1 SONOREX DD 06 plastic lidIndividual requirements & procurement serviceFor the matching insert vessels and for questions about which insert vessel belongs in which SONOREX unit, our procurement service accepts enquiries.

Sale price: €7.11 Manufacturer's RRP: €9.00 21% below manufacturer's RRP
Discount
Bandelin SONOREX EK 25 Aufnahmeklammer für SONOREX Ultraschallbäder
Bandelin SONOREX EK 25 holding clamp for SONOREX ultrasonic baths
Manufacturer number: 7519

The EK 25 stainless steel holding clamp takes laboratory flasks up to d = 42 mm. It is meant for tip-proof sonication in the SONOREX ultrasonic bath and is fastened in insert baskets and instrument holders. Bandelin states that laboratory flasks do not float up or tip over with the clamp.For larger flasks, the EK 50 (up to d = 52 mm), EK 100 (up to d = 65 mm) and EK 250 (up to d = 85 mm) are also available, for smaller ones the EK 10 (up to d = 31 mm). The insert basket or instrument holder is not included in the scope of delivery.Typical applicationsTypical uses in the compatible units:Small-scale sonochemical applications in the DT 31Sample preparation for analysis in the DT 52Homogenisation and emulsification in the DT 31 HSuitable forModelBandelin device no.Tank volume (l)DT 10032103.0DT 100 H32303.0DT 102 H32353.0DT 1028325528.0DT 1028 CH326645.0DT 1028 H323128.0DT 103 H32014.0DT 25532155.5DT 255 H32405.5DT 3132000.9DT 31 H32200.9DT 51032459.7DT 510 F132424.3DT 510 H32069.7DT 512 H322613.0DT 514325013.5DT 514 BH321618.7DT 514 H321113.5DT 5232051.8DT 52 H32251.8RK 1003013.0RK 100 H3123.0RK 102 H3033.0RK 102832228.0RK 1028 C66145.0RK 1028 CH14345.0RK 1028 H32428.0RK 103 H3264.0RK 25530665.5RK 255 H3165.5RK 313290.9RK 5103279.7RK 510 H3219.7RK 512 H79513.0RK 51427713.5RK 514 BH26318.7RK 514 H20713.5RK 523111.8RK 52 H1641.8ST 102 H71003.0ST 103 H71014ST 514 BH710718.7Technical detailsMaterialStainless steelLaboratory flasksup to d = 42 mmFasteningin insert baskets and instrument holdersScope of delivery1 SONOREX EK 25 stainless steel holding clampIndividual requirements & procurement serviceFor insert baskets, instrument holders and clamps of other sizes, our procurement service accepts enquiries.

Sale price: €29.23 Manufacturer's RRP: €37.00 21% below manufacturer's RRP