Bandelin SONOREX FT 4 foil test frame for SUPER RK, DIGITEC DT and smart ST
€22.91
% Manufacturer's RRP: €29.00 21% below manufacturer's RRP
- Stainless steel foil test frame, dimensions 160 x 200 mm
- For the foil test according to IEC 886
- For tanks with inner dimensions from 240 x 140 x 80 mm to 300 x 150 x 150 mm
- Suitable for 16 SONOREX models of the SUPER RK, DIGITEC DT and smart ST series
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Bandelin SONOREX FT 4 foil test frame for SUPER RK, DIGITEC DT and smart ST"
The FT 4 foil test frame measures 160 x 200 mm and is made of stainless steel. Bandelin lists it as suitable for tanks with internal dimensions from 240 x 140 x 80 mm to 300 x 150 x 150 mm. It is intended for 16 models of the SUPER RK, DIGITEC DT and smart ST series.
The foil test according to IEC 886 is used to test an ultrasonic cleaner. An aluminium foil is inserted for this purpose, and cavitation perforates or destroys it to a certain degree, depending on the duration. The suitable FL 4 aluminium foil with a thickness of 15 µm is also available. It is not included in the scope of delivery.
Typical applications
Bandelin names the foil test in these cases:
- Testing at the first commissioning of the ultrasonic cleaner
- Repetition at regular intervals after a corresponding period of operation, for example every three months
- Process verification, for example during the reprocessing of medical devices
The foils can be scanned or photographed and archived. This keeps a comparison over time possible.
Suitable for
| Model | Bandelin device no. | Tank volume (l) |
|---|---|---|
| DT 100 | 3210 | 3.0 |
| DT 100 H | 3230 | 3.0 |
| DT 102 H | 3235 | 3.0 |
| DT 103 H | 3201 | 4.0 |
| DT 106 | 3270 | 5.6 |
| DT 255 | 3215 | 5.5 |
| DT 255 H | 3240 | 5.5 |
| RK 100 | 301 | 3.0 |
| RK 100 H | 312 | 3.0 |
| RK 102 H | 303 | 3.0 |
| RK 103 H | 326 | 4.0 |
| RK 106 | 306 | 5.6 |
| RK 255 | 3066 | 5.5 |
| RK 255 H | 316 | 5.5 |
| ST 102 H | 7100 | 3.0 |
| ST 103 H | 7101 | 4 |
Technical details
| Material | Stainless steel |
|---|---|
| Frame dimensions (L x W) | 160 x 200 mm |
| Compatible internal tank dimensions (L x W x D) | 240 x 140 x 80 mm to 300 x 150 x 150 mm |
| Compatible foil | FL 4, thickness 15 µm |
Scope of delivery
- 1 SONOREX FT 4 stainless steel foil test frame
Individual requirements & procurement service
For the suitable foil, further foil test frames and questions about which frame belongs to a particular tank, our procurement service accepts enquiries.
Fits
Ultrasonic bath for reliable cleaning in everyday laboratory work The Bandelin SONOREX SUPER RK 100 is a compact ultrasonic bath with a 3-litre tank capacity for the daily cleaning of laboratory equipment, instruments and small parts. The tank has a usable capacity of 2.0 litres and is made from 1.4301 stainless steel with a wall thickness of 1.0 mm, ensuring a robust and durable construction for regular laboratory use. The housing is also made from 1.4301 stainless steel and meets degree of protection IP 32. SweepTec technology and ease of use The unit operates at a frequency of 35 kHz and generates a peak ultrasonic power of 320 W at a rated power (effective ultrasonic power) of 80 W. The fully automatic SweepTec function prevents standing waves in the ultrasonic field, thereby ensuring a particularly uniform cleaning effect throughout the entire tank volume. Operation is via a simple rotary knob for setting the time; the timer covers a range from 1 to 15 minutes (±5 %) and includes a continuous operation mode. A fill-level mark inside the tank makes it easier to fill it correctly with cleaning fluid. The power cable is 2 m long and permanently attached to the unit; it operates at 230 V~ (±10 %), 50/60 Hz. Applications for the SONOREX SUPER RK 100 Thanks to its compact dimensions, the ultrasonic bath is particularly suitable for laboratories with limited space, for example for instrument cleaning, the degassing of solvents or the gentle cleaning of laboratory glassware and small parts. For specific applications, Bandelin offers suitable inserts such as baskets and lids, as well as cleaning and disinfection concentrates, as separate accessories. Technical details ModelSONOREX SUPER RK 100 Frequency35 kHz Ultrasonic peak power320 W Rated power (effective)80 W Timer range1–15 min (±5 %), plus continuous operation Tank volume (capacity)3.0 l Useful capacity2.0 l Tank materialStainless steel 1.4301, wall thickness 1.0 mm External dimensions (L x W x H)260 x 160 x 250 mm Internal tank dimensions (L x W x D)240 x 140 x 100 mm Weight4.3 kg Degree of protectionIP 32 Operating voltage230 V~ (±10 %), 50/60 Hz ConformityCE conformity: Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 100 ultrasonic bath Operating instructions Customised Requirements & Procurement Service Do you need suitable inserts, baskets, lids or cleaning concentrates for your ultrasonic bath, or do you have specific requirements for your laboratory equipment? We support you with a personalised procurement service and will find the right solution for your needs. Find out more at our procurement service.
Thorough ultrasonic cleaning for medical practices, laboratories and workshops The Bandelin SONOREX SUPER RK 102 H is a robust, high-performance ultrasonic cleaner with a heating element for medical practices, laboratories and workshops. Intense cavitation bubbles clean thoroughly and gently, even in hard-to-reach areas of the items being cleaned. The housing, made from 1.4301 stainless steel with a hard chrome plating, is designed for long-term reliability. Uniform cleaning thanks to SweepTec The fully automatic SweepTec function prevents standing waves in the ultrasonic field, thus ensuring a particularly uniform cleaning effect throughout the tank. The rotary knob control allows for simple, intuitive adjustment of cleaning duration and bath temperature, suitable even for daily use without the need for training. Suitable accessories for optimum results For optimally tailored ultrasonic cleaning, suitable baskets, lids and cleaning and disinfection concentrates are available as accessories, tailored to different items to be cleaned and areas of application. Technical details Total volume3.0 litres Working volume2.0 litres Internal dimensions (L×W×D)240 × 140 × 100 mm External dimensions (L×W×H)260 × 160 × 250 mm MaterialStainless steel 1.4301, hard chrome-plated, wall thickness 1.0 mm Ultrasonic frequency35 kHz Ultrasonic power120 W (rated), 480 W (peak) Heating power140 W Temperature range30–80 °C, adjustable Timer1–15 minutes (±5 %) or continuous operation Voltage230 V~ (±10 %), 50/60 Hz Mains lead2 m, permanently attached to the unit Weight5.4 kg DrainG ¼ ball valve with 25 cm hose (right-hand side) Level indicatorFitted Degree of protectionIP 32 ClassificationClass I medical device (EU 2017/745) Scope of delivery 1x Bandelin SONOREX SUPER RK 102 H ultrasonic bath with heating Baskets, lids and cleaning/disinfection concentrates are not included and are available separately as accessories. Individual requirements & procurement service Do you need suitable baskets, inserts, lids or cleaning concentrates for your SONOREX ultrasonic bath? Our procurement service will be happy to support you with the suitable selection.
Bandelin SONOREX SUPER RK 106, compact ultrasonic bath for laboratories and medical practices The SONOREX SUPER RK 106 ultrasonic bath, part of Bandelin’s tried-and-tested SONOREX SUPER RK series, is designed for daily use in laboratories, medical practices and manufacturing facilities. With an ultrasonic frequency of 35 kHz, a peak ultrasonic power of 480 W and a nominal power of 120 W, the unit generates intense cavitation that reliably removes even stubborn contaminants. The tank is made of durable 1.4301 stainless steel with a wall thickness of 1.0 mm and offers a total capacity of 5.6 litres, with a usable working volume of 4.0 litres. This makes the RK 106 model a compact yet powerful ultrasonic bath suitable for small to medium-sized batches in everyday laboratory work, without taking up much space on the workbench. The housing is also made entirely of 1.4301 stainless steel, making the unit corrosion-resistant and easy to clean. The compact external dimensions of 265 x 265 x 270 mm allow for flexible installation even in laboratories with limited worktop space, whilst the weight of just 7.4 kg enables easy transport between different workstations. Applications in everyday laboratory work Ultrasonic baths such as the SONOREX SUPER RK 106 are used in many areas of the laboratory: for the gentle cleaning of instruments such as tweezers, scissors and other metal instruments; for the degassing of solvents and aqueous solutions prior to analytical applications such as HPLC or titration; and for cleaning laboratory glassware, pipettes, cuvettes and other small items to remove residues and deposits. The fill-level markings on the tank make it easy to fill it correctly with the cleaning medium, whilst the side-mounted drain with a G ¼ ball valve and a 25 cm long hose allows the tank to be emptied easily and cleanly without having to move or tilt the unit. This straightforward handling proves particularly beneficial in day-to-day operations, especially in laboratories where batches change frequently. As the SONOREX SUPER RK 106 operates without an integrated heater, it is particularly suitable for applications where the cleaning medium is at room temperature or is temperature-controlled separately. SweepTec technology for consistent cleaning results A key feature of the SONOREX SUPER RK 106 is the fully automatic SweepTec function. It prevents the formation of standing waves in the ultrasonic field, thereby ensuring uniform sound distribution and consistent cleaning performance throughout the entire tank volume, regardless of where the items being cleaned are located in the tank. The cleaning duration can be conveniently set using a rotary knob within a range of 1 to 15 minutes (± 5 %); alternatively, continuous operation is available when longer cleaning cycles are required. The robust housing made of 1.4301 stainless steel, the IP 32 protection rating and the 2-metre-long mains cable permanently attached to the unit make the ultrasonic bath a durable and practical piece of equipment suitable for everyday professional use in the laboratory. Technical details Ultrasonic frequency35 kHz Ultrasonic powerPeak power 480 W, nominal power 120 W Timer1–15 min (± 5 %), and continuous operation Capacity / Working capacity5.6 l / 4.0 l Tank materialStainless steel 1.4301, tank thickness 1.0 mm Internal dimensions (L x W x D)240 x 240 x 130 mm External dimensions (L x W x H)265 x 265 x 270 mm Weight7.4 kg DrainG ¼ ball valve with 25 cm hose, right-hand side Operating voltage230 V~ (± 10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit Enclosure protection ratingIP 32 ComplianceCE, Class I medical devices (Regulation (EU) 2017/745), Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), RoHS Directive (2011/65/EU) Scope of delivery 1x Bandelin SONOREX SUPER RK 106 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories such as insert baskets, lids or cleaning concentrates, a different tank size or a model with a heater? We can assist you in selecting the right ultrasonic bath for your application and with the bespoke procurement of laboratory equipment. Find out more at our procurement service or contact us directly for a personalised quote.
SONOREX SUPER RK 255 ultrasonic bath, tried-and-tested cleaning technology for laboratories and medical practices The Bandelin SONOREX SUPER RK 255 is a compact ultrasonic bath with a total capacity of 5.5 litres (3.8 litres working capacity), designed for daily cleaning routines in laboratories, doctors’ surgeries, dental practices and industrial workshops. Using an ultrasonic frequency of 35 kHz, the unit generates fine cavitation bubbles that reliably dislodge contaminants even from hard-to-reach cavities, channels, threads and crevices. It is operated via a simple rotary knob, which allows the cleaning duration to be adjusted continuously, for straightforward use without complex menu navigation and without the need for a lengthy training period for laboratory staff. This allows the ultrasonic bath to be easily integrated into existing cleaning and reprocessing workflows, for example as a standalone unit alongside a cleaning and disinfection device. According to Bandelin, instruments can be cleaned as part of manual reprocessing and before or after machine reprocessing. Applications: Instruments, laboratory glassware and solvents Thanks to its peak ultrasonic power of 640 W (nominal power 160 W), the ultrasonic bath is suitable for a wide range of cleaning tasks. Typical applications include the cleaning of instruments (suitability as specified by the instrument manufacturer), the gentle cleaning of laboratory glassware, pipettes, cuvettes and other small parts, as well as the degassing of solvents and aqueous media prior to sensitive analytical processes. Even stubborn residues such as dried-on samples or grease on tools and small parts can be thoroughly removed without damaging the material thanks to the intensive cavitation effect. The level mark on the stainless-steel tank facilitates correct filling with cleaning fluid, whilst the side drain, fitted with a ball valve and hose, allows the bath to be emptied easily and cleanly without the need for decanting, a particular advantage given the frequent changes of fluid required in everyday laboratory work. Robust construction for continuous use Both the ultrasonic tank and the housing are made of 1.4301 stainless steel, which ensures high resistance to cleaning agents and disinfectants, as well as a long service life in everyday laboratory use. The drip-proof housing (IP 32 rating) and the side handles facilitate transport and installation, for example on a workbench, a laboratory table or a mobile trolley. The timer covers a range of 1 to 15 minutes (± 5 %) and can alternatively be set to continuous operation, allowing for both short cleaning cycles for delicate parts and longer applications. The permanently fitted, 2-metre-long mains cable ensures flexible positioning at the workstation without the need for additional extension leads. For optimally tailored ultrasonic cleaning, baskets, lids and cleaning and disinfection concentrates are available as separate accessories to complement the unit. Technical details Ultrasonic frequency35 kHz Ultrasonic peak power640 W Nominal ultrasonic power160 W Capacity / Working capacity5.5 l / 3.8 l (with fill-level markings) Timer1 – 15 min (± 5 %), plus continuous operation Internal dimensions (L x W x D)300 x 150 x 150 mm External dimensions (L x W x H)325 x 175 x 295 mm Weight6.4 kg Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) Housing protection ratingIP 32 DrainG ¼ ball valve with 25 cm hose Mains cable2 m, permanently attached to the unit Operating voltage230 V~ (± 10 %), 50/60 Hz ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 255 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require accessories for this ultrasonic bath, such as baskets, lids or cleaning concentrates, a larger quantity, or personalised advice on selecting the right model for your application? We are here to assist you with procurement and will be happy to answer any questions you may have about this product. Use our procurement service to easily discuss your requirements with us.
Greater depth for your cleaning processes: Bandelin SONOREX SMART ST 103 H When standard dimensions reach their limits, the Bandelin SONOREX SMART ST 103 H comes into its own. This ultrasonic bath from the SMART series combines a compact footprint with an impressive tank depth of 150 mm. With a total volume of 4.0 litres, it is a suitable choice for laboratories, medical facilities and industrial plants that need to clean elongated instruments or bulky components thoroughly. The integrated high-performance heater and Bandelin’s tried-and-tested ultrasonic technology ensure good cleaning performance, even with complex geometries. SMART technology: intuitive control meets precision The SONOREX SMART series offers clear and easy operation. The ST 103 H features a digital control system that allows the user to precisely set the cleaning time and temperature via an easy-to-clean membrane keypad. The heating can be flexibly adjusted between 20 and 80 °C, whilst the digital timer supports both short-term and continuous operation. A special feature is the ‘sweep technology’: by continuously shifting the acoustic peaks within the tank, standing waves are prevented, supporting a uniform cavitation effect and protecting sensitive surfaces. Durability thanks to stainless steel The ST 103 H stands out above all for its choice of materials. Both the housing and the oscillating tank are made from robust, rust-free stainless steel. The tank is also particularly easy to maintain and resistant to a wide range of cleaning chemicals. With an ultrasonic frequency of 35 kHz, the unit offers a suitable energy density to generate cavitation bubbles that penetrate even the smallest capillaries and boreholes. Thanks to its drip-proof housing (IP 32), the unit is equipped for everyday use in the laboratory or workshop. Safety in a professional environment Safety for both people and equipment is standard at Bandelin. The SONOREX SMART ST 103 H is fitted with automatic over-temperature protection, which safely switches the unit off when critical values are reached. The clear digital display provides information on the current process status at all times. Technical Specifications Filling volume: 4.0 litres (working volume approx. 2.7 litres) Inner tank dimensions (L x W x D): 240 x 140 x 150 mm Peak ultrasonic power: 480 watts Nominal ultrasonic power: 120 watts Heating power: 140 watts Temperature range: 20 °C to 80 °C Ultrasonic frequency: 35 kHz (sweep technology) Protection rating: IP 32 Mains connection: 230 V, 50/60 Hz Scope of delivery SONOREX SMART ST 103 H ultrasonic bath Mains lead Detailed operating instructions (Note: Suitable insert baskets and lids are available separately.) Accessories & Advice To make the most of your ultrasonic bath’s full potential, we recommend using genuine Bandelin accessories such as the K 3 C insert basket and the matching D 100 lid. For specialised cleaning tasks, TICKOPUR concentrates are also available. Do you have any questions about material compatibility, or do you require a quote for a complete set? Make use of our procurement service and benefit from our expert advice on laboratory and ultrasonic technology.
Where instruments or small parts also need to be cleaned of grease and residues using heat, a cold ultrasonic bath is often not sufficient. The Bandelin SONOREX SUPER RK 100 H features its own heating system within its compact 3.0-litre capacity, making it the smallest heated model in the SUPER RK series.Heating from 30 to 80 °CThe 140-watt heater covers a temperature range of 30 to 80 °C and is fitted with dry-run protection, which switches the heater off as soon as there is insufficient liquid in the tank. Combined with an operating frequency of 35 kHz, a peak power of 320 watts and a nominal power of 80 watts, it can remove dirt that would otherwise require more time or a more aggressive cleaning agent at room temperature.One vibration system for 2.0 litres of working capacityThe total capacity of 3.0 litres (working capacity 2.0 litres) is subjected to ultrasonic treatment via a single vibration system, whilst the SweepTec function prevents standing waves in the tank. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick. The unit is operated via a rotary knob; the cleaning duration and bath temperature can be set independently of one another, whilst the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Compact and without a drain connectionAs with the smaller RK 31, the data sheet for the RK 100 H makes no mention of a ball valve; ‘drain: -’ is explicitly stated in the technical specifications. With a capacity of 3.0 litres, the tank can still be easily emptied after cleaning. With external dimensions of 260 x 160 x 250 mm and a net weight of 3.5 kg, the appliance fits easily even on smaller worktops.Decision guide: when is it worth opting for the next size up?The RK 100 H is usually sufficient for individual instruments, spectacles or small tools. If you regularly need to clean several items at once or slightly larger objects, the RK 103 H (4.0 litres), which is slightly larger and fitted with a drain, offers a practical advantage when changing the cleaning solution. For beakers or small sieves, the RK 510 H, with a capacity of 9.7 litres, is the next step up within the SUPER RK series.SUPER RK or smart ST: two ways to achieve the same volumeBandelin also offers the same 3.0-litre tank size in its digital smart ST range, which features a touchscreen, fine-tuned power control and programme memory instead of a rotary knob. Those wishing to save cleaning cycles in a reproducible manner are better off with the smart ST 102 H, whilst those who prefer simple, robust operation without electronics should stick with the RK 100 H. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and MaintenanceThe 2.0-litre capacity provides space for the items to be cleaned; if filled to the brim, the tank will overflow when the items are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid and is available separately via the procurement service. As the RK 100 H does not have an automatic degassing function, a short initial run in continuous operation helps to expel dissolved air from freshly prepared liquid before the items to be cleaned are loaded. After the last cycle of the day, the tank should be emptied and wiped down to prevent any cleaning agent residues from settling.Typical applicationsHeat-assisted cleaning of small instruments in practices and laboratoriesDegreasing small metal and plastic partsCleaning spectacles, watches and jewelleryPreliminary cleaning of laboratory glassware prior to further processingFrequently Asked QuestionsWhat temperature does the RK 100 H reach?The heater operates at temperatures ranging from 30 to 80 °C, controlled via the rotary knob.Is there a drain for emptying?No, according to the data sheet, this model does not have a ball valve; the tank is simply tipped out.What is the difference between the RK 100 H and the RK 31?Both are part of the small SUPER RK range; the RK 100 H also has a 140-watt heating element and a slightly larger capacity (3.0 litres instead of 0.9 litres).Is a basket included in the scope of delivery?No, the K 3 C insert basket, the PK 2 C plastic basket and the D 100 lid are available separately.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mmWeight (net)3.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 320 W, nominal power 80 W, 1 vibration systemHeating power140 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmCasing materialStainless steel 1.4301Drainno drain/ball valveMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.0 A / 115 V 2.0 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX SUPER RK 100 H ultrasonic bath with heatingFixed power cable (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThere is a specific procurement requirement for the K 3 C insert basket, the PK 2 C plastic basket, the D 100 lid or a model with a drain such as the RK 103 H. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Ultrasonic bath with heating for professional laboratory cleaning The Bandelin SONOREX SUPER RK 255 H is a heated ultrasonic bath with a nominal volume of 5.5 litres (working capacity 3.8 litres), designed for daily use in laboratories, clinics, dental practices and industry. The integrated SweepTec technology fully automatically readjusts the ultrasonic field, thereby preventing standing waves in the sound field and ensuring a uniform, homogeneous cleaning effect throughout the entire tank. With a nominal ultrasonic power of 160 watts and a peak power of 640 watts, the ultrasonic bath operates reliably even with more stubborn soiling. The thermostatically controlled heater, with a heating power of 280 watts, allows bath temperatures ranging from 30 to 80 °C, making the unit suitable for both gentle and intensive, temperature-assisted cleaning tasks. Applications in everyday laboratory work The ultrasonic bath is suitable for numerous applications in everyday laboratory work: from instrument cleaning in medical practices, clinics and sterilisation departments, through to the degassing of solvents prior to analytical processes, and the cleaning of laboratory glassware, pipettes, cuvettes and other small parts. The unit is also well suited for the pre-cleaning of components prior to further processing, for example as a preliminary step before manual final cleaning. Operation is convenient via a rotary knob, which allows the cleaning time and bath temperature to be set directly on the unit without the need for complex menu navigation, an advantage when the unit is used by different members of laboratory staff. The timer covers a range of 1 to 15 minutes (±5 %) and can also be set to continuous operation (∞) when longer cleaning cycles are required. A fill-level mark inside the stainless steel tank makes it easy to fill the tank precisely with the relevant cleaning or disinfecting solution and helps ensure that the 3.8-litre capacity is not exceeded. Robust construction for continuous use The tank of the SONOREX SUPER RK 255 H is made of 1.4301 stainless steel with a wall thickness of 1.0 mm and is therefore designed for continuous use in laboratory environments. For emptying, the unit features a drain valve (G 1/4 ball valve) on the right-hand side with a 25 cm long hose, which allows the bath to be changed without tilting the tank. Two side handles facilitate transport within the laboratory, whilst the 2-metre-long mains cable, which is permanently attached to the unit, ensures sufficient freedom of movement at the workstation. With external dimensions of 325 x 175 x 295 mm and a weight of 6.6 kg, the ultrasonic bath can also be easily accommodated on standard laboratory workstations. With an IP 32 protection rating for the housing and CE marking as a Class I medical device in accordance with Regulation (EU) 2017/745, as well as compliance with the Low Voltage Directive (2014/35/EU), the EMC Directive (2014/30/EU) and the RoHS Directive (2011/65/EU), the SONOREX SUPER RK 255 H is also suitable for regulated laboratory environments. Technical details Frequency35 kHz (automatic frequency adjustment via SweepTec) Ultrasonic powerNominal 160 W, peak 640 W Heating power280 W Temperature range30–80 °C, thermostatically adjustable Timer1–15 mins (±5 %) plus continuous operation (∞) Nominal volume / working capacity5.5 litres / 3.8 litres Tank materialStainless steel 1.4301, tank thickness 1.0 mm External dimensions (L x W x H)325 x 175 x 295 mm Internal dimensions (L x W x D)300 x 150 x 150 mm Weight6.6 kg Enclosure protection ratingIP 32 DrainG 1/4 ball valve with 25 cm hose, right-hand side Mains connection230 V~ (±10 %), 50/60 Hz ConformityCE marking, Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), RoHS Directive (2011/65/EU) Scope of delivery 1x Bandelin SONOREX SUPER RK 255 H ultrasonic bath with heating Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or specialised cleaning and disinfection concentrates for your ultrasonic bath, or are you looking for a procurement solution tailored to your specific application? As a specialist laboratory supplier, we can assist you in selecting the right accessories and other laboratory equipment for your laboratory. Please contact us via our procurement service. We’ll be happy to advise you on your specific requirements and provide you with a suitable quote.
With the same footprint as the DT 102 H, the Bandelin SONOREX DIGITEC DT 103 H has a deeper tank: 240 x 140 x 150 mm instead of 240 x 140 x 100 mm. This gives a capacity of 4.0 l. The heating element has a power rating of 200 W and is adjustable between 20 and 80 °C.Deeper tank, same footprintThe appliance measures 260 x 160 x 310 mm externally and weighs 4.4 kg. Like the housing, the tank is made of 1.4301 stainless steel, with a wall thickness of 1.0 mm. The working capacity is 2.7 l, and a fill level mark is incorporated. The unit does not have any handles. The drain consists of a G ¼ ball valve on the right-hand side; the ball valve, hose connector and hose are included in the scope of delivery.Ultrasound, heating and functionsTwo vibration systems deliver a peak power of 560 W at 35 kHz; the nominal power is 140 W. The heater has a power rating of 200 W and is fitted with protection against delayed boiling and dry-run protection. SweepTec prevents standing waves in the ultrasonic field; the DEGAS rapid degassing function is activated at the start of the cleaning process, and a pulse function is also available. The current consumption at 230 V is 1.5 A.Buttons, display and timerThe buttons are wipe-clean. The display shows the remaining cleaning time and the temperature as both setpoint and actual values. The duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath can run continuously. It switches off automatically after 12 hours without any buttons being pressed.When a depth of 150 mm makes all the differenceWith all other tank dimensions being the same, the SONOREX DIGITEC DT 102 H has a depth of 100 mm, a capacity of 3.0 l and a heating power of 140 W. For even larger volumes with the same operation, the DT 156 BH (9.0 l, tank 500 x 140 x 150 mm) and the unheated DT 106 (5.6 l, round tank with a diameter of 240 mm) are available.AccessoriesAvailable for the DT 103 H are the K 3 CL stainless steel insert basket (200 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 2 kg), the D 100 lid and the perforated DE 100 lid for two insert cups. The insert cups SD 06 (glass), PD 06 (plastic) and EB 05 (stainless steel) each hold 0.6 l. Also available are the GH 1 instrument holder, the PHS 12 sample holder, the KW 3 insert tank and the GV 3 handle adjuster for controlling the immersion depth.Typical applicationsCleaning of objects of various shapes, types and sizesHomogenisation and emulsificationRapid degassing of liquidsSample preparation for analysisSonochemistry: radical generation, enhanced mass transferInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow deep is the bath?150 mm, with a length of 240 mm and a width of 140 mm.How hot does the bath get?The temperature can be set between 20 and 80 °C. The heater has a power rating of 200 W.Does the unit have handles?No, it is designed without handles.How heavy is the unit?4.4 kg net, external dimensions 260 x 160 x 310 mm.Technical detailsTotal capacity / Working capacity4.0 l / 2.7 lInternal dimensions of the tank (L x W x D)240 x 140 x 150 mmExternal dimensions (L x W x H)260 x 160 x 310 mm (excluding ball valve, including feet)Weight (net)4.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 2 vibration systemsHeating power200 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesNoneOperating voltage230 V AC (± 10 %), 50/60 Hz, alternatively 115 V AC (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 1.5 A / 115 V 3.0 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 103 H ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert basket, lid, insert cups and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service will be happy to request a quote on your behalf, without obligation, about a insert basket, lid, insert cup or another SONOREX model.
Thorough ultrasonic cleaning for medical practices, laboratories and workshops The Bandelin SONOREX DIGITEC DT 100 is an ultrasonic cleaner for medical practices, laboratories and workshops. Intense cavitation bubbles clean thoroughly yet gently, even in hard-to-reach areas of the items being cleaned. The wipe-clean button controls and the LED display showing the remaining cleaning time make it particularly easy to use. SweepTec, pulse and degassing functions The fully automatic SweepTec function prevents standing waves in the ultrasonic field and ensures a particularly uniform cleaning effect. The pulse function allows for variable cleaning intensity, whilst the Degas function, which can be activated at the start, degasses the cleaning fluid, thereby further enhancing the effect of the ultrasound. Suitable accessories Suitable baskets, lids and cleaning and disinfection concentrates are available as accessories, tailored to different items to be cleaned and areas of application. Technical details Total volume3.0 litres Working volume2.0 litres Internal dimensions (L×W×H)240 × 140 × 100 mm External dimensions (L×W×H)260 × 160 × 250 mm MaterialStainless steel 1.4301, wall thickness 1.0 mm Ultrasonic frequency35 kHz Ultrasonic power80 W (rated), 320 W (peak) HeatingNot available Timer1/2/3/4/5/10/15/30 minutes or continuous operation (±5 %) DisplayLED display, remaining cleaning time Voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit Weight4.2 kg Level indicatorAvailable Degree of protectionIP 33 ClassificationClass I medical device (EU 2017/745) Scope of delivery 1x Bandelin SONOREX DIGITEC DT 100 ultrasonic bath Baskets, lids and cleaning/disinfection concentrates are not included in the scope of delivery and are available separately as accessories. Individual requirements & procurement service Do you need suitable baskets, inserts, lids or cleaning concentrates for your SONOREX ultrasonic cleaner, or are you looking for a heated model? Our procurement service will be happy to help you select suitable accessories.
The Bandelin SONOREX DIGITEC DT 255 has internal dimensions of 300 x 150 x 150 mm and a total capacity of 5.5 l. It is operated via buttons and does not have a built-in heating element.300 mm long tankThe working capacity is 3.8 l; a fill-level mark inside the tank makes filling easier. The tank and housing are made from 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. Compared to the DT 510, which has internal dimensions of 300 x 240 x 150 mm, the footprint of the DT 255 is a good third smaller, whilst the length and depth are the same. For even longer items to be cleaned, the SUPER RK 156 BH is designed with a 500 mm tank length; however, it features a rotary knob control instead of buttons.Two vibration systems, 640 watts peak powerAt an operating frequency of 35 kHz, the two vibration systems achieve a peak ultrasonic power of 640 watts; the rated power is 160 watts. The SweepTec function operates fully automatically and is designed to prevent standing waves in the ultrasonic field. There is also a pulse function. The DEGAS degassing function can be activated at the start of the cleaning process to remove dissolved air from freshly prepared medium.Button controls, timer and shut-offThe unit is operated via wipe-clean buttons; the remaining cleaning time can be read on the display. The timer can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (tolerance ± 5 %); alternatively, the bath can run continuously. After 12 hours without a button press, the unit switches off automatically. For those wishing to heat the bath, the version with a heater is available as the DT 255 H under order number 3240.Drain, handles and installationA drain with a G 1/4 ball valve on the right-hand side is provided for emptying. The ball valve, hose connector and hose for fitting to the drain are supplied with the unit. Handles on the sides make it easier to move the unit, which weighs 4.9 kg. The 2-metre power cable is permanently attached, and the protection rating is IP 33. The permissible ambient temperature is 5 to 40 °C.Matching accessories from the Bandelin rangeFor the DT 255, Bandelin supplies the D 255 lid, the K 5 C stainless steel insert basket (260 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 5 kg) and the perforated lid DE 255 for two insert cups. Insert cups with lids and rubber rings are available in 0.6-litre sizes in glass, plastic and stainless steel. The KW 5 hanging tray made of HD-PE (254 x 96 x 130 mm) is designed for temperatures up to a maximum of 60 °C. The FT 4 foil test frame is used to test the bath.Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizes in laboratories, medical practices and workshopsHomogenisation and emulsificationRapid degassing of liquidsSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsDoes the DT 255 have a heating element?No. The heated version is called the DT 255 H and has the order number 3240.How much liquid does the bath hold?The total capacity is 5.5 l; the working capacity is 3.8 l.Are there other plug types available?Yes. Bandelin offers variants with UK, Swiss and US plugs under separate order numbers, for example 3215-GB. The 3215 model offered here is for 230 V with a CEE 7/7 EU plug.What is the DEGAS function for?It is a degassing function that is activated at the start of the cleaning process and is designed to enhance the effect of the ultrasound.Technical detailsTotal capacity / Working capacity5.5 l / 3.8 lInternal dimensions of tank (L x W x D)300 x 150 x 150 mmExternal dimensions (L x W x H)325 x 175 x 295 mm (excluding handles and ball valve, including feet)Weight (net / gross)4.9 kg / 6.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 2 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions495 x 280 x 365 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 255 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, insert cups and cleaning concentrates, and they are available separately.Individual requirements and procurement serviceFor the K 5 C insert basket, the D 255 lid, the DE 255 perforated lid with insert cups or the heated DT 255 H variant, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories or another model from the SONOREX range.
Small components, tweezers or small laboratory parts often do not require a large tank volume, but rather a reliable temperature and simple digital control. The Bandelin SONOREX DIGITEC DT 100 H offers exactly that in a compact design: a total volume of 3.0 l, a working capacity of 2.0 l, and push-button operation with an LED display showing the remaining time and bath temperature. For a laboratory workstation or a workbench in a workshop, external dimensions of 260 x 160 x 250 millimetres (L x W x H, excluding handles) are sufficient.Compact volume for small batchesWith a total volume of 3.0 l and a working capacity of 2.0 l, the DT 100 H is designed for smaller cleaning volumes; a vibration system delivers 80 watts of nominal power and 320 watts of peak power. This is sufficient for individual tools, small metal or plastic parts, and laboratory accessories that do not accumulate in large batches. The internal dimensions of the tank are 240 x 140 x 100 millimetres.Buttons instead of a rotary knob, a display instead of a scaleButtons are used for operation instead of a rotary knob, whilst an LED display shows the remaining time as well as the setpoint and actual bath temperature simultaneously. The time can be selected in fixed increments from 1 to 30 minutes or set to continuous operation, in each case with a tolerance of ±5 %. The appliance switches off automatically after 12 hours without any buttons being pressed.Heating up to 80 °CThe 140-watt heating power covers a temperature range of 20 to 80 °C; a dry-run protection feature prevents damage should the tank accidentally run without liquid. Additionally, the unit features SweepTec for even sound distribution, DEGAS for rapid degassing, and a pulse function for varying cleaning intensity.DT 100 H or DT 512 H: which model is suitableFor small quantities such as tweezers, spectacles, jewellery or individual laboratory items, the DT 100 H with a 3.0-litre capacity is a suitable choice. If you regularly process larger batches, such as several laboratory bottles or bulkier items, the DT 512 H, with a total volume of 13.0 l and significantly higher performance, is the more suitable addition.Difference from the SUPER RK 100 H and smart ST 102 HThe SUPER RK 100 H has the same tank size but is operated via a traditional rotary knob, without a digital display or the DEGAS function. The smart ST 102 H offers more advanced technical features: a touchscreen, power adjustment from 10 to 100 % in 1 % increments, a freely selectable timer up to 8 hours and 12 programme memory slots. The DIGITEC DT 100 H falls somewhere in between and offers digital time and temperature control with a reasonable level of operational complexity.Operation without a drain tapThe DT 100 H has no drain or ball valve. To change the cleaning fluid, the tank is emptied directly or drained using a suction device. The K 3 C insert basket or the PK 2 C plastic basket, as well as the D 100 lid, both available separately, are compatible with the unit. The power cable is permanently fitted and measures 2 metres; the unit can be connected to either 230 V or 115 V at 50/60 Hz.Typical applicationsCleaning of small tools, tweezers and laboratory accessoriesProcessing of small metal or plastic parts in the workshopPre-cleaning of individual components prior to assembly or further processingCleaning tasks in confined spaces in the laboratory or at the workbenchFrequently asked questionsDoes the DT 100 H have a drain tap?No, the DT 100 H has no drain; the tank is emptied directly.Is the unit a medical device?Yes, Class I in accordance with Regulation (EU) 2017/745.Which accessories are compatible with the DT 100 H?The K 3 C insert basket or the PK 2 C plastic basket, as well as the D 100 lid; neither of these is included in the scope of delivery.How does the DT 100 H differ from the heated SUPER RK 100 H?Both models have the same tank size, but the SUPER RK 100 H is operated via a rotary knob, whilst the DT 100 H is operated via buttons with an LED display and an additional DEGAS function.How long does the appliance run without any input before it switches off?After 12 hours without any buttons being pressed, the automatic safety shut-off switches the appliance off.Technical detailsTotal volume3.0 lWorking capacity2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mm (excluding handles/ball valve, including feet)Weightnet 3.5 kg / gross 4.4 kgTank materialStainless steel 1.4301, 1.0 mmUltrasonic frequency35 kHzUltrasonic power80 W nominal power, 320 W peak power, 1 vibration systemHeating power140 WTemperature range20 to 80 °CTimer1/2/3/4/5/10/15/30 minutes (±5 %) or continuous operation, automatic safety shut-off after 12 hoursOperationButtons, LED display showing remaining time and setpoint/actual bath temperatureFunctionsSweepTec, DEGAS rapid degassing, pulse function, dry-run protection for the heaterDrainNo drain/ball valveMains connection230 V AC (±10 %), 50/60 Hz, optionally 115 V AC, 2 m fixed power cable, Protection Class ICurrent consumption230 V 1.0 A / 115 V 2.0 AProtection ratingIP 33ClassificationClass I medical device (EU 2017/745)Scope of delivery1x Bandelin SONOREX DIGITEC DT 100 H ultrasonic bathFixed mains lead (2 m)Instructions for useThe K 3 C insert basket or PK 2 C plastic basket and D 100 lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor a suitable insert basket, lid or a larger DIGITEC model, please contact our procurement service.
The Bandelin SONOREX DIGITEC DT 102 H is a heated ultrasonic bath designed for use on a workbench: It has a capacity of 3.0 l, external dimensions of 260 x 160 x 250 mm and a bath temperature that can be set between 20 and 80 °C. It is operated via buttons. The display shows the remaining cleaning time as well as the setpoint and actual temperature.Tank, heater and drainThe tank measures 240 x 140 x 100 mm internally and is made of 1.0 mm thick 1.4301 stainless steel; the surface is hard-chromed. A fill-level mark indicates the fill height; the working capacity is 2.0 l. The heater has a power rating of 140 W and is fitted with protection against delayed boiling and dry-run protection. The drain is located on the right-hand side as a G ¼ ball valve. The ball valve, hose connector and hose are included with the unit and are fitted to the drain.Ultrasonic field with SweepTec and DEGASTwo vibration systems operate at 35 kHz with a peak power of 480 W and a nominal power of 120 W. The SweepTec function prevents standing waves in the ultrasonic field, so that the ultrasonic treatment becomes more uniform. The DEGAS rapid degassing function is activated at the start of the cleaning process. Degassed liquid further enhances the effect of the ultrasound. A pulse function is also available.Timer, shut-off and operationThe cleaning duration can be selected in increments of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %); alternatively, the bath can run continuously. It switches off automatically 12 hours after the last button press. Handles on the sides make it easier to move the unit; the 2-metre power cable is permanently attached to the unit. The housing is made of 1.4301 stainless steel and is IP 33-rated.DT 102 H comparisonThe SONOREX smart ST 102 H features the same 240 x 140 x 100 mm tank; it operates at 40 kHz and is controlled via a touchscreen with twelve programme memory slots. If you need greater depth whilst maintaining the same footprint, consider the DT 103 H with a 240 x 140 x 150 mm tank, a 4.0-litre capacity and 200 W heating power. The DT 102 H is the suitable choice if button controls, a heating element and the smaller tank are sufficient.Accessories for hangingFor the DT 102 H, there is the K 3 C stainless steel insert basket (200 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 2 kg), the PK 2 C plastic basket (187 x 90 x 56 mm, mesh size 2 mm), the D 100 lid and 0.6-litre insert beakers with lids made of glass, plastic or stainless steel. The KW 3 polyethylene insert tank, complete with lid, is designed for use up to a maximum of 60 °C. The range is complemented by cleaning and disinfection concentrates from Bandelin.Typical applicationsUltrasonic cleaning in medical practices, laboratories and workshops, including items of various shapes and sizesRapid degassing of liquidsSample preparation for analysisSonochemistry, for example radical generation or improved mass transferHomogenisation and emulsificationInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsIs the bath heated?Yes. The heater has a power rating of 140 W, and the temperature can be set between 20 and 80 °C. Protection against delayed boiling and dry-run protection are built in.Is the drain included in the scope of delivery?Yes. A ball valve, hose connector and hose are supplied with the unit and are fitted to the drain on the right-hand side.Are there other plug types available?Yes, versions with UK plugs, Swiss plugs and US plugs for 115 V are available under separate order numbers. This offer is for the 230 V version with a CEE 7/7 EU plug.What happens if the unit is forgotten?The bath switches off automatically 12 hours after the last button press.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mm (excluding handles and ball valve, including feet)Weight (net)4.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, 2 vibration systemsHeating power140 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mm, hard chrome-platedHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 1.2 A / 115 V 2.3 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 102 H ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include an insert basket, lid, insert beakers or concentrates.Individual requirements and procurement serviceFor the insert basket, lid, insert beaker or any other model in the SONOREX DIGITEC range, our procurement service accepts enquiries, including for versions with different plugs.
The Bandelin SONOREX DIGITEC DT 255 H is a professional, digitally controlled ultrasonic bath designed for intensive use in laboratories and medical practices. With a capacity of 5.5 litres (3.8 L working volume), it is suitable for the rapid and thorough cleaning of longer laboratory instruments, pipettes or glassware. Digital control and SweepTec® for reproducible results At the heart of this unit is the ‘DIGITEC’ control system with a clear LED display showing time (1 to 30 min or continuous operation) and temperature. One important feature is the SweepTec® technology. It ensures a continuous shift in the ultrasonic pressure peaks within the bath. This prevents ‘standing waves’ (hot spots), protects sensitive items being cleaned (e.g. thin glass) and supports homogeneous and gentle cleaning throughout the entire ultrasonic bath. Integrated heater (H) The ‘H’ in the model name stands for the powerful, thermostatically controlled heating system (20 to 80 °C). This supports the effectiveness of cleaning chemicals (e.g. STAMMOPUR) and can speed up the cleaning process. Robust and durable construction The oscillating tank is made from robust, cavitation-resistant stainless steel. The housing is also made from stainless steel and is easy to clean. This model (MPN 3240) is suitable for users who require full digital performance without the need for remote control or process documentation (infrared interface). Technical details Capacity: 5.5 litres Working capacity: 3.8 litres Inner tank dimensions (L x W x D): 300 x 150 x 150 mm Ultrasonic frequency: 35 kHz Ultrasonic peak power: 640 W Nominal ultrasonic power: 160 W Heating power: 280 W Heating range: 20 to 80 °C (adjustable) Timer: 1 to 30 min (in increments of 1, 2, 3, 4, 5, 10, 15, 30) & continuous operation (∞) Technology: SweepTec® Material (tank/housing): Stainless steel 1.4301 Drain: Yes (G ¼ ball valve, right-hand side) Housing protection rating: IP 33 Scope of delivery SONOREX DIGITEC DT 255 H (main unit) Mains cable (permanently attached to the unit, 2 m) Operating instructions Note: The basket (insert basket) and lid are accessories and are not included in the scope of delivery. Individual requirements & procurement service The insert basket (e.g. K 6) and the lid (D 150) are available as accessories. Do you need advice on these accessories or the appropriate STAMMOPUR cleaning concentrates? Our team of experts will be happy to help. For accessories or spare parts not listed here, please use our individual procurement service.
One size larger than the RK 100 H, but with the same simple operating concept: The Bandelin SONOREX SUPER RK 103 H has a total capacity of 4.0 litres and a working capacity of 2.7 litres for cleaning tasks where a little more space is needed for instruments or small parts, without having to switch to a significantly larger bath.Greater performance thanks to two vibration systemsInstead of a single vibration system, as in the RK 100 H, the RK 103 H features two vibration systems operating in parallel, delivering a combined peak power of 560 watts at a nominal power of 140 watts, whilst maintaining a constant operating frequency of 35 kHz. The SweepTec function ensures that this power is distributed evenly across the slightly larger tank surface without standing waves forming.200-watt heater up to 80 °CAs with the other H models in the series, the integrated heater covers a range from 30 to 80 °C, with 200 watts of heating power and dry-run protection. Cleaning duration and temperature are set separately via two rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Ball valve drain as a practical difference from the RK 100 HUnlike the RK 100 H, the RK 103 H features a drain: a G 1/4 ball valve on the right-hand side allows for controlled emptying without having to lift or tilt the tank. Given the frequent changes of medium in everyday laboratory work, this is a noticeable advantage over its smaller counterpart. The tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the external dimensions are 260 x 160 x 310 mm with a net weight of 4.6 kg.Guide to choosing between the RK 100 H and RK 103 HAnyone who regularly changes the cleaning medium or requires a working volume of more than 2.0 litres is better off with the RK 103 H (2.7-litre working volume, with drain) than with the smaller RK 100 H without a drain. If even more space is required, for example, to accommodate several beakers at the same time, the RK 510 H, with a total capacity of 9.7 litres, is the next model up in the SUPER RK series.Product range at a glance: SUPER RK, DIGITEC DT and smart STBandelin also offers the same performance class in the DIGITEC DT series, featuring push-button operation, an LED display and automatic DEGAS degassing, as well as in the smart ST series with a touchscreen and programme memory. The RK 103 H is designed for anyone who prefers simple, mechanical operation without a display. In addition, there are Elma Elmasonic ultrasonic baths for laboratories that already rely on this brand.Use and maintenanceThe 2.7-litre working capacity leaves room for the items to be cleaned when filling the bath; the bath should not be filled to the brim. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. Before the first cleaning cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel any trapped air and achieve the full cavitation effect. After the last use of the day, the tank should be drained via the ball valve and wiped dry to prevent any residues from settling.Typical applicationsCleaning of tweezers, scissors and smaller practice instrumentsDegreasing and cleaning of small metal and plastic partsCleaning of cuvettes, filter holders and sample holdersHeat-assisted pre-cleaning prior to further processingFrequently asked questionsWhat is the difference between the RK 103 H and the RK 100 H?The RK 103 H has a larger capacity (4.0 litres instead of 3.0 litres), two vibration systems instead of one, and a ball valve drain, which the RK 100 H does not have.What temperature range is available?30 to 80 °C, controlled via a separate rotary knob.On which side is the drain?On the right, fitted as a ball valve with a G 1/4 connection.Is the unit equally suitable for use in medical practices and laboratories?It is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and is CE-compliant with the Low Voltage, EMC and RoHS Directives. The suitability of the instruments depends on the instrument manufacturer’s specifications.Technical detailsTotal capacity / Working capacity4.0 l / 2.7 lInternal dimensions of the tank (L x W x D)240 x 140 x 150 mmExternal dimensions (L x W x H)260 x 160 x 310 mmWeight (net)4.6 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 2 vibration systemsHeating power200 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.5 A / 115 V 3.0 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 380 mmScope of delivery1x Bandelin SONOREX SUPER RK 103 H ultrasonic bath with heatingFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 3 CL insert basket, the D 100 lid or another model from the SUPER RK series, there is an individual procurement need. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
A round tank, 240 mm in diameter and 130 mm deep, distinguishes the Bandelin SONOREX DIGITEC DT 106 from the rectangular DIGITEC models. The tank holds 5.6 l, has four vibration systems with a peak power of 480 W at 35 kHz and operates without a heater.Round tankThe tank has an internal diameter of 240 mm and a depth of 130 mm. It is made of 1.4301 stainless steel, 1.0 mm thick, and the housing is made of the same material. The working capacity is 4.0 l; a fill-level mark indicates the fill height. Externally, the unit measures Ø 265 x 270 mm and weighs 5.1 kg; it has no handles.Ultrasonic field without heatingFour vibration systems generate a peak power of 480 W at 35 kHz (nominal power 120 W); the current consumption at 230 V is 0.6 A. There is no heating element. SweepTec prevents standing waves in the ultrasonic field; the DEGAS rapid degassing function is activated at the start of the cleaning process, and a pulse function is available. If you require a heating function, compare this with the DT 102 H (3.0 l, 140 W heating power) or the DT 156 BH (9.0 l, 600 W).OperationThe DT 106 is operated using wipe-clean buttons; a display shows the remaining time. Options include 1 to 5 minutes in 1-minute increments, 10, 15 and 30 minutes (± 5 %), as well as continuous operation. The bath switches off 12 hours after the last button press. The drain is a G ¼ ball valve on the right-hand side; the hose connector and hose are included with the unit, and the mains cable (2 m) is permanently fitted.Basket, lid and insertsThe K 6 stainless steel hanging basket has a diameter of 215 mm and a depth of 50 mm (mesh size 5 x 5 mm, load capacity up to 5 kg) and is part of the range of accessories for this model. Also available are the lid D 6, the perforated lid DE 6, 0.6-litre insert beakers made of glass, plastic or stainless steel, the sieve baskets KD 0 and PD 04, and the sieve holder SH 7. The FT 4 film test frame and the FL 4 film cut-outs are used to test the bath.Alternative with an oblong tankThe SONOREX DIGITEC DT 156 offers a similar volume in an elongated design, with a capacity of 6.0 l and a tank measuring 500 x 140 x 100 mm. The DT 106 has a tank diameter of 240 mm; the tank of the DT 156 is 140 mm wide and 500 mm long.Typical applicationsCleaning of objects of various shapes, types and sizesRapid degassing of liquids and sample preparation for analysisHomogenisation, emulsificationSonochemical applications such as radical generationInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsWhat shape is the bath?Round, 240 mm in diameter and 130 mm deep.Does it have a heating element?No. For a heated bath of this size, other models in the DIGITEC range are available.Which basket is compatible with the unit?The K 6 stainless steel hanging basket, 215 mm in diameter and 50 mm deep, with a load capacity of up to 5 kg.What is the current consumption?0.6 A at 230 V, 1.1 A at 115 V.Technical detailsTotal capacity / Working capacity5.6 l / 4.0 lInternal dimensions of tank (Ø x D)Ø 240 x 130 mmExternal dimensions (Ø x H)Ø 265 x 270 mm (excluding ball valve, including feet)Weight (net)5.1 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesNoneOperating voltage230 V AC (± 10 %), 50/60 Hz, alternatively 115 V AC (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 0.6 A / 115 V 1.1 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions340 x 340 x 340 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 106 ultrasonic bathPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainThe hanging basket, lid, insert beakers and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service can enquire on your behalf about a round basket, lid, sieve holder or another SONOREX bath.
Same tank size as the SUPER RK 100 H, but with a completely different operating system: With a total capacity of 3.0 litres and touchscreen controls, the Bandelin SONOREX smart ST 102 H is the digital alternative for users who wish to fine-tune cleaning cycles and repeat them consistently.Touchscreen instead of a rotary knobA touchscreen takes over the operation instead of a mechanical rotary knob. The ultrasonic power can be adjusted from 10 to 100 % in 1 % increments, whilst the timer accepts any value from 1 second to 8 hours in 1-second increments. Twelve programme memories, including an ECO programme, allow cleaning cycles to be saved once they have been set and recalled later with a single tap, rather than having to reset the time, power and temperature each time.40 kHz instead of 35 kHz, plus DEGAS degassingUnlike the SUPER RK series, the smart ST 102 H operates at an ultrasonic frequency of 40 kHz, with a peak power of 480 watts and a nominal power of 120 watts. In addition to the SweepTec function, there is an automatic DEGAS rapid degassing feature, which removes dissolved air from freshly prepared cleaning fluid before the actual cleaning process begins, supplemented by a pulse mode and an interval operation ranging from 1 to 60 seconds.Heating up to 80 °C, in 1-degree incrementsThe 140-watt heater covers a range from 20 to 80 °C, adjustable in 1-degree increments rather than over a continuous range as with the SUPER RK models, and also features boiling delay protection and dry-run protection. Drainage is via a G 1/4 ball valve with a 25 cm hose on the right-hand side.Hard-chromed tank and system bus interfaceAs with the SUPER RK series, the tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the tank is also hard-chromed. The unit can be connected to a docking station via a system bus interface with a 4-pin M12 socket. A lithium backup battery (CR 2032, 3 V) safeguards the stored programmes even in the event of a power cut.SUPER RK, DIGITEC DT or smart ST: choose the suitable control optionBandelin offers this same compact 3.0-litre tank size in three control concepts: with a rotary knob in the SUPER RK series (such as the RK 100 H), with push-button controls and an LED display in the DIGITEC DT series, or with a touchscreen and programme memory in the smart ST 102 H. Those wishing to store cleaning parameters for different items in a reproducible manner will benefit from the smart ST series, whilst those who prefer simple, robust operation without electronics should opt for the RK 100 H. We also offer Elma Elmasonic ultrasonic baths as a further brand.Use and maintenanceThe working capacity of 2.0 litres is less than the total capacity of 3.0 litres, ensuring that no water spills over the rim when the items to be cleaned are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning fluid. Unlike the SUPER RK models, the DEGAS function of the smart ST 102 H automatically degasses freshly prepared cleaning fluid; a manual pre-run is not necessary. The hard-chromed tank is compatible with standard aqueous cleaning agents, but should be emptied and wiped dry after the last cycle of the day to prevent residues from settling.Typical applicationsReproducible cleaning programmes for recurring test seriesPrecision cleaning of small instruments and sensor tips using stored parametersProcess validation in laboratories and practices with documented settingsConnection to a docking station for networked cleaning processesFrequently asked questionsWhat is the difference between the smart ST 102 H and the SUPER RK 100 H?Both have a tank capacity of 3.0 litres; the smart ST 102 H features a touchscreen, programme memory, DEGAS degassing and operates at 40 kHz instead of 35 kHz.How many programmes can be stored?Twelve, including an ECO programme.Is there a drain?Yes, a G 1/4 ball valve with a 25 cm hose on the right-hand side.Is the appliance also available with a 115 V connection?Yes, according to Bandelin, a 115 V version is available on request, as well as versions with Swiss or British plugs; the model listed here is the standard EU version with 230 V.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mmWeight (net)4.4 kgUltrasonic frequency40 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, power adjustment 10 to 100 % in 1 % incrementsHeating power140 W, temperature range 20 to 80 °C in 1 °C increments, boiling delay protection, dry-run protectionTimer1 second to 8 hours in 1-second increments, automatic safety shut-off after 8 hoursOperationTouchscreenFunctionsSweepTec, DEGAS rapid degassing, Pulse mode, interval 1 to 60 s, 12 programme memories including ECO programme, M12 system bus interface (4-pin)Tank materialStainless steel 1.4301, thickness 1.0 mm, hard chrome-platedHousing materialStainless steel 1.4301DrainG 1/4 ball valve with 25 cm hose, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.2 A / 115 V 2.4 ABack-up batteryLithium button cell CR 2032, 3 VDegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX smart ST 102 H ultrasonic bath with heatingFixed mains lead (2 m)Operating instructionsThe insert basket and lid are not included in the scope of delivery and are available separately.Regulatory informationThe appliance contains a lithium backup battery (CR 2032 button cell, 3 V) for the programme memory. In accordance with the Batteries Act, batteries must not be disposed of with household waste; used batteries can be returned free of charge at local authority collection points and at any shop selling batteries of the relevant type.Individual requirements and procurement serviceThere is a need for individual procurement of the K 3 C insert basket, the PK 2 C plastic basket, the D 100 lid or the docking station. Through our procurement service, you can request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.
Matching accessories
The FL 4 foil is an aluminium foil with a thickness of 15 µm in the size 250 x 300 mm. It is used for the function test of an ultrasonic bath. The foil test is a standardised method according to IEC 886. Depending on the duration, cavitation perforates the inserted foil to a certain degree.According to Bandelin, the simple execution, the quick result and the reliable indication speak in favour of the foil test. A suitable FT foil test frame is needed for the foil test; this foil fits FT 1 and FT 4. The frames are also available.Typical applicationsTypical tasks with this foil:regular monitoring of an ultrasonic bath, according to Bandelin for example quarterlyearly detection of problems with the ultrasonic bathDocumentation: scan or photograph the foil after the test and archive itTechnical detailsMaterialAluminiumThickness15 µmSize (L x W)250 x 300 mmScope of delivery50 SONOREX FL 4 aluminium foils, thickness 15 µm, size 250 x 300 mmIndividual requirements & procurement serviceFor further foils, foil test frames and questions about testing an ultrasonic bath, our procurement service accepts enquiries.
Content: 50 piece(s) (€0.58 / 1 piece(s))