Binder FP 260 drying and heating oven with forced air circulation and programme functions, 259 l, 9010-0365
€4,564.00
- Material testing chamber with forced air circulation and programme functions
- Temperature range: 10 °C above ambient temperature to 300 °C
- 259 litres usable volume
- Time-interval and real-time programming for temperature ramps
- Ethernet interface for laboratory networking
- Either 230 V (1~) or 240 V (3~)
Product information "Binder FP 260 drying and heating oven with forced air circulation and programme functions, 259 l, 9010-0365"
The Binder FP 260 drying oven is the largest model in the FP series of materials testing ovens, featuring forced air circulation and programme functions. With a usable volume of 259 litres and a temperature range from 10 °C above ambient temperature up to 300 °C, the unit is suitable for test tasks involving larger batches or multiple test specimens to be processed simultaneously, where temperature and air circulation must be maintained precisely over extended periods.
Programmable test sequences with Ethernet connectivity
The additional programme functions and the adjustable fan allow temperature and air circulation conditions to be precisely tailored to complex, lengthy test tasks. The freely programmable controller, featuring time-interval and real-time programming, allows for temperature ramps or jumps, whilst an Ethernet interface integrates the unit into the laboratory infrastructure. The electromechanically controlled exhaust air flap adjusts the air exchange to suit the specific process.
Stable temperature control even with larger volumes
At 150 °C, the FP 260 achieves a spatial temperature deviation of ± 1.7 K and a temporal deviation of ± 0.4 K. The heating time to 150 °C is 19 minutes; after the door has been open for 30 seconds, the setpoint temperature is reached again after 6 minutes. The air change rate at 100 °C is 9 times per hour. The unit is available with a choice of 230 V (1-phase, 2.5 kW, 16 A unit fuse) or 240 V (3-phase) power supply.
Typical applications
- Material testing and long-term testing of larger components or batches
- Heat treatment of material samples in quality assurance and development
- Test programmes with defined temperature ramps over several hours
- Drying of larger quantities of laboratory glassware or test specimens
Where the FP 115 reaches its capacity limit, for example, when several test specimens need to follow an identical temperature profile simultaneously, the FP 260, with its 259-litre capacity, offers sufficient internal space without compromising on programming accuracy.
Selection guide: choosing the right size from the FP series
With a capacity of 259 litres, the FP 260 is the largest model in the FP series, significantly larger than the FP 115 and the compact FP 56. You can find the complete range of this series in our range of climate chambers and incubators.
| Model | Useful volume, external dimensions (W x D x H), weight |
| FP 56 | 60 l, 560 x 596 x 622 mm, 41 kg |
| FP 115 | 116 l, 714 x 636 x 732 mm, 55 kg |
| FP 260 | 259 l, 810 x 786 x 962 mm, 82 kg |
For test programmes involving larger components or multiple batches to be processed simultaneously, where the smaller FP models reach their volume limits, the FP 260 is the suitable choice within the range.
Distinction: FP or M, depending on the level of programme functionality required
The same applies to the larger model: with programmable temperature ramps and an Ethernet connection, the FP 260 meets standard test requirements. For those who also require an internal data logger and a failsafe function with a backup sensor for greater process reliability, the Binder M 260 drying and heating oven, which is identical in size, offers a suitably equipped alternative.
Technical details
| Temperature range | 10 °C above ambient temperature up to 300 °C |
| Usable volume | 259 l |
| Spatial temperature variation (at 150 °C) | ± 1.7 K |
| Temporal temperature deviation (at 150 °C) | ± 0.4 K |
| Heating time to 150 °C | 19 min |
| Recovery time after opening the door | 6 min |
| Air change rate (at 100 °C) | 9 times per hour |
| Energy consumption at 100 °C | 275 Wh/h |
| Energy consumption at 150 °C | 465 Wh/h |
| Sound pressure level | 43 dB(A) |
| Rated voltage | 230 V, 1-phase (alternatively 240 V, 3-phase) |
| Rated power | 2.5 kW |
| Unit fuse | 16 A |
| External dimensions (W x H x D) | 810 x 962 x 786 mm |
Scope of delivery
- 1x Binder FP 260 drying and heating oven, 230 V (9010-0365)
- Standard grid shelves
- Operating instructions
Frequently asked questions before purchase
What mains connections are available for the FP 260?
The FP 260 is available with either 230 V (1-phase, 2.5 kW, 16 A unit fuse) or 240 V (3-phase).
How long does it take for the FP 260 to heat up to 150 °C?
The heating time to 150 °C is 19 minutes; after the door has been open for 30 seconds, the set temperature is reached again after 6 minutes.
What is the energy consumption of the FP 260?
At 100 °C, energy consumption is 275 Wh/h; at 150 °C, it is 465 Wh/h.
What is the scope of delivery for the FP 260?
The scope of delivery includes the Binder FP 260 in the 230 V version (9010-0365), the standard grid shelves and the operating instructions.
Individual requirements and procurement service
Further accessories are available for the FP 260, such as additional grid shelves, calibration certificates and maintenance contracts of varying scope. Do you require customised configurations, spare parts or advice on selecting the right materials testing chamber for your application? We’d be happy to assist you via our procurement service.
| Volume: | 259 l |
|---|