Binder M 56 Drying and Heating Oven with forced air circulation, 59 l, up to 300 °C, 9010-0371
€6,176.00
- Drying and heating cabinet with forced circulation for material testing and ageing tests
- Temperature range: 23 °C above room temperature to 300 °C
- 59 litres net capacity, compact benchtop unit
- Touchscreen controller with time-interval and real-time programming
- Heating time to 150 °C in just 9 minutes
- Ethernet interface and internal data logger
Product information "Binder M 56 Drying and Heating Oven with forced air circulation, 59 l, up to 300 °C, 9010-0371"
The Binder M 56 drying oven is the most compact model in the M Classic.Line series and is designed for laboratories and testing centres that need to carry out reliable material and ageing tests in a small space. With a usable volume of 59 litres and a temperature range from 23 °C above room temperature up to 300 °C, this benchtop unit covers a wide range of applications, from routine drying to demanding test programmes with varying temperature stages.
Touchscreen controller with extensive programming functions
Unlike standard drying ovens, the M 56 is designed for materials testing: the intuitive touchscreen controller allows for interval and real-time programming, enabling temperature ramps and steps for test sequences to be precisely defined. An Ethernet interface and an internal data logger enable comprehensive documentation of test runs, a key factor for quality assurance reports and test protocols.
Rapid, uniform heating thanks to APT.line technology
APT.line technology, with its enhanced heating capacity, ensures uniform temperature distribution throughout the chamber. At 150 °C, the M 56 achieves a spatial temperature deviation of 1.4 ± K and a temporal deviation of 0.2 ± K. The heating time to 150 °C is just 9 minutes; once the door is opened, the setpoint temperature is reached again after only 4 minutes. With an air change rate of 175 times per hour at 100 °C, the recirculation system ensures rapid, uniform drying results even with a dense load.
Typical applications
- Material testing and ageing tests in quality assurance and development
- Drying of laboratory glassware, small parts and test specimens
- Short-term heat treatment using pre-set temperature programmes
- Sterilisation processes for small batches
For example, a multi-stage test cycle with different temperature stages can be programmed once on the touchscreen and then run repeatedly, unattended and in a reproducible manner, without laboratory staff having to manually adjust the temperature.
Selection guide: choosing the right model size from the M Series
With a capacity of 59 litres, the M 56 is the most compact model in the M-Series. Those requiring greater capacity will find the next sizes up – the M 115, M 260 and, in the large-capacity format, the M 720 – all featuring the same touchscreen controller. The complete range can be found in the LT Laborhandel range of climate chambers and incubators.
| Model | Internal volume, external dimensions (W x D x H), weight |
| M 56 | 59 l, 560 x 596 x 622 mm, 43 kg |
| M 115 | 113 l, 710 x 636 x 732 mm, 58 kg |
| M 260 | 256 l, 810 x 786 x 962 mm, 86 kg |
| M 720 | 735 l, 1,160 x 816 x 1,590 mm, 170 kg |
For material testing and ageing tests involving smaller sample quantities, where the full range of functions offered by the series is still required, the M 56 remains the most space-saving option.
Distinguishing feature: M or FP – depending on documentation requirements
Compared to the FP series, the M 56 offers a touchscreen controller, an internal data logger and an Ethernet interface for comprehensive test documentation. If time-interval and real-time programming without touchscreen operation are sufficient, the Binder FP 56 drying and heating oven – which is identical in size – is the more cost-effective alternative within the range of programme functions.
Technical details
| Temperature range | 23 °C above room temperature to 300 °C |
| Useful volume | 59 l |
| Spatial temperature variation (at 150 °C) | 1.4 ± K |
| Temporal temperature deviation (at 150 °C) | 0.2 ± K |
| Heating time to 150 °C | 9 min |
| Recovery time after door opening | 4 min |
| Air change rate (at 100 °C) | 175 times/h |
| Energy consumption at 150 °C | 330 Wh/h |
| Sound pressure level | 46 dB(A) |
| Rated voltage | 230 V |
| Rated power | 2 kW |
| External dimensions (W x H x D) | 560 x 622 x 596 mm |
Contents
- 1x Binder M 56 drying and heating cabinet, 230 V (9010-0371)
- Standard insert grids
- User manual
Frequently asked questions before purchase
How quickly does the M 56 heat up to 150 °C?
The heating time to 150 °C is just 9 minutes; once the door is opened, the set temperature is reached again after just 4 minutes.
What documentation options does the M 56 offer?
An Ethernet interface and an internal data logger enable comprehensive documentation of test runs.
What is the air change rate for the M 56?
The air change rate at 100 °C is 175 times per hour.
What mains connection is required?
The M 56 operates on 230 V with a rated power of 2 kW.
Customised requirements & procurement service
Further accessories are available for the M 56, such as additional insert grilles, calibration certificates and maintenance contracts of varying scope. Do you require custom configurations, spare parts or advice on selecting the right test chamber for your application? LT Laborhandel will be happy to assist you via our procurement service.
| Volume: | 59 l |
|---|