Skip to main content Skip to search Skip to main navigation

IKA ICC control pro 12 Compact Thermostat Package, stainless steel bath, 12 litres, 0010000415

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA ICC control pro 12 Compact Thermostat Package, stainless steel bath, 12 litres, 0010000415"

The IKA ICC control pro 12 compact thermostat package is a ready-to-connect complete system for temperature control in the laboratory. It combines the ICC control immersion circulator with a 12-litre stainless steel bath. For analytical test series, material testing or scale-up steps in multi-user operation, what matters is a constant temperature and a bath that withstands high thermal loads.

Temperature control and pump

The process engineering centrepiece of this package is the ICC control immersion circulator. The microprocessor control achieves a temperature stability of ±0.01 K. The TFT colour display shows the process parameters and presents temperature curves and programme sequences (up to 10 programmes, each with 10 segments). The integrated pressure and suction pump delivers up to 18 litres per minute and mixes the bath volume.

Material robustness of the “pro 12” stainless steel bath

The IB pro 12 bath is included in the scope of delivery. Unlike polycarbonate variants, the stainless steel bath offers good chemical resistance to many temperature-control media (such as water or silicone oils) and allows use of the extended working temperature range of up to 150 °C. The geometry and wall thickness of the bath can reduce heat loss to the surroundings.

Connectivity, documentation and occupational safety

The ICC control can be integrated into digitally networked laboratory environments. Via the integrated USB and RS232 interfaces, the thermostat package can be connected to higher-level laboratory software (such as labworldsoft®), so that temperature profiles can be recorded and procedures automated. The following safety features contribute to occupational safety in day-to-day operation: an adjustable safety circuit protects against thermal overload, a mechanical float switch provides reliable dry-run protection, and visual and audible alarm signals immediately alert laboratory staff to process deviations.

Technical details

Thermoregulation & Pump Specifications

  • Thermostat type: Compact immersion circulator (ICC control)
  • Working temperature range: Room temperature +10 K to 150 °C
  • Temperature stability according to DIN 12876: ±0.01 K
  • Heating power: 2,000 W
  • Pump type: Adjustable pressure and suction pump
  • Max. flow rate (free flow): 18 l/min
  • Max. delivery pressure: 0.3 bar
  • Max. suction pressure: 0.2 bar

Bath equipment & materials

  • Bath designation: IB pro 12
  • Bath material: Corrosion-resistant stainless steel
  • Max. bath volume: 12.0 litres
  • Bath opening (bottom): 255 x 127 mm, maximum 292 x 147 mm at the upper bath edge
  • Working depth / bath depth: 150 mm
  • Cleaning: easy to clean

Electronics, interfaces & safety

  • Display: TFT colour display showing all parameters
  • Programme functions: Integrated programmer for 10 programmes, each with 10 segments
  • External sensor connection: for direct connection of an external PT100 sensor
  • Interfaces: USB-B and RS232 for PC connectivity
  • Safety systems: Adjustable safety circuit (overheating protection), visual/audible fault alarm, liquid level float switch (dry-run protection)
  • Mains supply: 230 V / 50/60 Hz

Scope of delivery

  • 1 x IKA ICC control immersion circulator base unit
  • 1 x IKA stainless steel bath IB pro 12
  • 1 x mounting bracket / bath bridge for secure installation

Important note: Bath lids, cooling coils for external counter-cooling, external PT100 temperature sensors, connecting hoses and the required temperature control fluids are not included in the standard scope of delivery and must be ordered separately according to your specific application.

Warranty

Manufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Individual requirements & accessories

At operating temperatures above 60 °C, a precisely fitting stainless steel bath lid (e.g. IKA CM.pro 12) can reduce evaporation losses. For applications at or below room temperature, dedicated cooling coils (CC2) for feeding in external cooling water are available. For temperature control directly in your sample vessel, we offer external stainless steel temperature sensors. For high-temperature operation up to 150 °C, the use of thermal fluids designed for this temperature range (e.g. IKA Labotherm) is recommended to avoid thermal decomposition of the medium. Please use our technical procurement service to configure your digitalised workstation.

Certification marks: NRTL (TÜV SÜD, USA/Canada)
Skip product gallery

Matching accessories

Discount Promo
IKA PT 1000.60 Temperaturmessfühler, Edelstahl, -20 bis +350 °C
IKA PT 1000.60 Temperature Sensor, Stainless Steel, -20 to +350 °C, 0003516800
Manufacturer number: 0003516800

A heated magnetic stirrer can only control temperature as precisely as the connected external sensor measures it. The IKA PT 1000.60 (MPN 0003516800) is an immersion sensor made from stainless steel 1.4571 with a PT1000 sensor of tolerance class A, covering a measuring range from -20 °C to +350 °C.With a response time t9/10 of 10 seconds, the sensor reacts quickly to temperature changes in the medium, which matters for exothermic reactions or fast heating ramps that need reliable control. The 1,050 mm cable allows flexible placement of the stirrer relative to the vessel without the sensor restricting work at the stand.CompatibilityOfficial accessory for the IKA RCT basic anodized magnetic stirrer with heating (MPN 0020133785), RET basic magnetic stirrer with heating (MPN 0025008265) and RET basic anodized magnetic stirrer with heating (MPN 0020133787). For the IKA RH lite magnetic stirrer with heating (MPN 0020007108) the sensor is not intended, as this model has no external sensor connection according to IKA.Technical detailsSensor typeImmersion sensorSensor elementPT1000 (DIN IEC 751 Class A)Measuring accuracy± (0.15 + 0.2 % of reading) KResponse time t9/1010 secondsTemperature measuring range-20 °C to +350 °CProbe tube materialStainless steel 1.4571Probe tube diameter3 mmProbe tube length254 mmMin. immersion depth20 mmCable length1,050 mmWeight0.025 kgScope of delivery1 x IKA PT 1000.60 temperature sensor (MPN 0003516800).Individual requirements & procurement serviceFor mechanically mounting sensor and stirrer on a stand matching stand rods and boss heads are also available. Our procurement service helps put together a complete stirring and temperature measuring station.

Sale price: €135.20 Manufacturer's RRP: €169.00 20% below manufacturer's RRP