Skip to main content Skip to search Skip to main navigation

IKA PT 1000.60 Temperature Sensor, Stainless Steel, -20 to +350 °C, 0003516800

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA PT 1000.60 Temperature Sensor, Stainless Steel, -20 to +350 °C, 0003516800"

A heated magnetic stirrer can only control temperature as precisely as the connected external sensor measures it. The IKA PT 1000.60 (MPN 0003516800) is an immersion sensor made from stainless steel 1.4571 with a PT1000 sensor of tolerance class A, covering a measuring range from -20 °C to +350 °C.

With a response time t9/10 of 10 seconds, the sensor reacts quickly to temperature changes in the medium, which matters for exothermic reactions or fast heating ramps that need reliable control. The 1,050 mm cable allows flexible placement of the stirrer relative to the vessel without the sensor restricting work at the stand.

Compatibility

Official accessory for the IKA RCT basic anodized magnetic stirrer with heating (MPN 0020133785), RET basic magnetic stirrer with heating (MPN 0025008265) and RET basic anodized magnetic stirrer with heating (MPN 0020133787). For the IKA RH lite magnetic stirrer with heating (MPN 0020007108) the sensor is not intended, as this model has no external sensor connection according to IKA.

Technical details

Sensor typeImmersion sensor
Sensor elementPT1000 (DIN IEC 751 Class A)
Measuring accuracy± (0.15 + 0.2 % of reading) K
Response time t9/1010 seconds
Temperature measuring range-20 °C to +350 °C
Probe tube materialStainless steel 1.4571
Probe tube diameter3 mm
Probe tube length254 mm
Min. immersion depth20 mm
Cable length1,050 mm
Weight0.025 kg

Scope of delivery

1 x IKA PT 1000.60 temperature sensor (MPN 0003516800).

Individual requirements & procurement service

For mechanically mounting sensor and stirrer on a stand matching stand rods and boss heads are also available. Our procurement service helps put together a complete stirring and temperature measuring station.

Skip product gallery

Fits

Discount Promo
Topseller
IKA RCT basic anodized magnetic stirrer with heating, anodized aluminium base, 0020133785
IKA RCT basic anodized magnetic stirrer with heating, anodized aluminium base, 0020133785
Manufacturer number: 0020133785

The IKA RCT basic anodized magnetic stirrer with heating (MPN 0020133785) expands the RCT series to include a variant with an anodized aluminium base. With a heating power of 800 watts, a maximum stirring capacity of up to 20 litres of water and a closed housing with degree of protection IP 54, the unit is suitable for laboratory applications requiring rapid, direct heat transfer without thick barrier layers, such as demanding chemical reactions, syntheses and thermal processes in industrial and academic laboratory settings. Thermal conductivity thanks to the anodized base The key design feature of this model is the circular base with a diameter of 135 millimetres, made from anodized aluminium. Unlike traditional ceramic coatings, the anodized metal surface offers high, direct thermal conductivity. This reduces heating times in day-to-day laboratory work, as energy is transferred to the vessel with minimal loss. The anodized layer protects the underlying aluminium from mechanical abrasion, scratches and a wide range of solvents. This ensures a long service life and consistent performance in day-to-day routine use. Precise kinetics and temperature control The control electronics of the RCT basic anodized allow for stepless adjustment of the stirring speed from 50 to 1,500 revolutions per minute, set via a rotary-push control with a setting accuracy of 10 revolutions per minute. The LED display shows setpoint and actual values for speed and temperature at all times. For temperature-sensitive media, a connection socket is provided for external PT1000 series temperature sensors as well as for the ETS-D5 and ETS-D7 contact thermometers. With the PT1000 or ETS-D5, the temperature of the medium can be controlled with an accuracy of ±0.5 Kelvin; with the ETS-D7 or the PT wireless probe, this improves to ±0.2 Kelvin. The ETS-D7 or PT wireless can also be used to measure the pH value of the medium as an optional feature. Robust housing and safety concept The system architecture is housed in a robust, closed die-cast aluminium housing with degree of protection IP 54. This sealing protects the motor and control boards from splashing water and dust. An independently adjustable safety circuit (50 to 360 °C) monitors the maximum temperature of the heating plate and switches off the heating in the event of an unexpected overheating. In addition, a visual residual heat indicator warns staff of the risk of burns until the surface has cooled down again. The RCT basic anodized features an integrated menu function with a timer: the freely programmable timer can be set to start either immediately or only once the target temperature has been reached, and emits an audible signal when the time has elapsed; it is possible to specify separately whether the heating and/or stirring should switch off afterwards. With dimensions of 160 x 100 x 200 millimetres (W x H x D) and a net weight of 2.3 kilograms, the unit remains compact enough to operate several units side by side in a fume hood. Typical applications The anodized base and the connection options for external temperature sensors make the RCT basic anodized a versatile stirrer for various laboratory applications in research and industrial quality control: Chemical syntheses and reactions with rapid, direct heat transfer via the anodized aluminium plate Homogenisation and heating of larger volumes of up to 20 litres of water Precise temperature control within the medium using a PT1000, ETS-D5, ETS-D7 or the PT wireless probe Routine processes in quality control and research where short heating times of up to 9 Kelvin per minute are required Use in the laboratory thanks to IP 54 protection against splashing water and dust Technical details Number of stirring points1Max. stirring capacity (based on water)20 litresMaximum load25 kgMotor typeBrushless DC motor (EC), 9 W output powerSpeed range50 to 1,500 rpmSpeed controlContinuously variable via rotary push-button controlSetting accuracy for speed10 rpmStir bar length20 to 80 mmHeating power800 WHeating plate temperatureRoom temperature to 310 °CTemperature setting resolution1 K (heating plate), 0.1 K (actual value display)Safety temperature range (adjustable)50 to 360 °CHeating rate (1 l H₂O, heating stage H1500)9 K/minControl accuracy with PT1000±0.5 KControl accuracy with ETS-D5±0.5 KControl accuracy with ETS-D7 or PT wireless±0.2 KControl accuracy at the centre of the heating plate without a vessel (at 100 °C)±5 KSelf-heating of the hotplate (ambient temperature 22 °C, 1 hour of stirring)max. +12 KMaterial of the base plateAnodised aluminium (aluminium oxide coating)Dimensions of the base plateØ 135 mmOverall dimensions (W x H x D)160 x 100 x 200 mmNet weight2.3 kgDegree of protection according to DIN EN 60529IP 54DisplayLED display for setpoint and actual valuesConnection for external temperature sensorPT1000 series, ETS-D5, ETS-D7, PT wirelessTimer1 second to 5,999 minutesDigital interfacesRS232 and USB-CWPAN interfaceoptional via USB-WD donglepH measurementOptional with ETS-D7 or PT wirelessPower consumption820 W, standby 0.45 WMains connection220 to 230 V, 50/60 Hz Scope of delivery 1 x IKA RCT basic anodized magnetic stirrer with heating (MPN 0020133785) 1 x mains cable 1 x Detailed operating instructions / safety guide Compatible accessories The following original accessories are available to expand the functionality of the RCT basic anodized: IKA PT1000.60 stainless steel temperature probe for direct control within the medium, combined with the H 16 V support rod and the H 44 boss head for securing to the stirrer Precisely fitting silicone protective cover (H 104) to protect the control panel from splashes IKA Dry attachments (DryZone) made of anodized aluminium for oil-free heating of round-bottom flasks PTFE-coated magnetic stir bars in cylindrical, oval or triangular shapes Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements and procurement service The IKA manufacturer’s warranty applies to the RCT basic anodized: 2 years, extended to 10 years upon registration at ika.com/register within 90 days of purchase. Our procurement service is available to help you equip your laboratory workstations with additional original accessories, spare parts or individual calibration to suit your specific applications. We are also happy to assist you in putting together suitable temperature probe and mounting sets for multiple workstations. Further information and contact details can be found on our procurement service page.

Sale price: €628.55 Manufacturer's RRP: €967.00 35% below manufacturer's RRP
Discount Promo
IKA RET basic anodized magnetic stirrer with heating, anodized aluminium base, Wi-Fi/LAN, 0020133787
IKA RET basic anodized magnetic stirrer with heating, anodized aluminium base, Wi-Fi/LAN, 0020133787
Manufacturer number: 0020133787

The IKA RET basic anodized magnetic stirrer with heating (MPN 0020133787) combines a heating power of 800 watts with a compact housing measuring 160 x 200 x 100 millimetres and integrated Wi-Fi and LAN interfaces. This allows the unit to be used in a confined space within a fume hood or on a laboratory lift platform, whilst simultaneously integrating it into networked laboratory infrastructures. For B2B laboratory set-ups with high safety and documentation requirements, the RET basic anodized offers a combination of rapid heating, precise speed control and a comprehensive, standards-compliant safety concept for continuous daily use. Compact design with high power density and anodized protection The 135-millimetre base consists of a highly thermally conductive aluminium substrate and enables heating rates of up to 9 Kelvin per minute with uniform temperature distribution, adjustable across four heating speed settings. To protect against mechanical wear, scratches and aggressive chemical reagents, the surface is sealed with an anodized coating. Despite the high heating power of 800 watts, the housing remains ultra-compact at 160 x 200 x 100 millimetres. The stirrer therefore saves space in the fume hood, can be positioned on any standard laboratory lifting platform and is suitable for parallel experimental set-ups in confined spaces. Networked laboratory processes via Wi-Fi and LAN For integration into networked laboratory infrastructures and automated documentation processes, the RET basic anodized is equipped as standard with Wi-Fi and LAN interfaces, as well as the wired USB-C and RS232 interfaces. This connectivity allows the magnetic stirrer to be monitored centrally, controlled remotely or integrated into higher-level software solutions, including via the IKA app. The communication interface, which is based on ASCII-based Namur commands, also enables direct device-to-device communication. For example, the RET basic anodized can be linked to an IKA overhead stirrer: if the stirring speed of the viscous medium falls below a critical threshold, the RET basic anodized automatically deactivates the heating. This is an important prerequisite for reliable, unattended continuous operation. Comprehensive safety concept in accordance with EN IEC 61010-2-010 With a total of 18 integrated safety features, the RET basic anodized complies with the laboratory equipment standard EN IEC 61010-2-010 for heated laboratory equipment. System safety is further confirmed by a certificate from TÜV Süd in accordance with the NRTL standard (comparable to UL and CSA). In addition to a mechanically adjustable safety circuit (50 to 360 °C) via two separate plate sensors, the unit features Delta-T medium monitoring, sensor breakage and misalignment detection, as well as automatic heating shutdown in the event of a sudden drop in temperature, such as that caused by glass breakage. In the event of a safety shutdown, the ‘Always-Stir’ function takes effect: heating is stopped whilst stirring remains active to prevent delayed boiling or hotspots in the medium. An optical residual heat warning also protects against burns on surfaces exceeding 50 °C. Typical applications The combination of network connectivity, compact design and comprehensive safety features makes the RET basic anodized a versatile instrument for digitised laboratory environments: Networked laboratory processes requiring documentation, thanks to integrated Wi-Fi and LAN interfaces Unattended continuous operation through coupling with an IKA overhead stirrer via Namur commands Demanding syntheses with high safety requirements thanks to 18 safety features in accordance with EN IEC 61010-2-010 Mobile process monitoring via the IKA app Suitable for use in fume hoods and on laboratory lifting platforms thanks to its compact housing dimensions of 160 x 200 x 100 millimetres Technical details Number of stirring points1Max. stirring capacity (based on water)20 litresMotor typeBrushless EC motorSpeed range50 to 1,700 rpmHeating power800 WHeating plate temperatureRoom temperature to 340 °CMaximum heating rateup to 9 K/minHeating speed4 levels, individually adjustableBase diameter135 mmBase materialAluminium with anodized finishNetwork interfacesWi-Fi and LANData interfaces (wired)USB-C and RS232Communication standardASCII-based Namur commandsApp integrationIKA APPCompliance with standardsEN IEC 61010-2-010, TÜV Süd NRTL-tested (UL/CSA standard)Number of safety features18Adjustable safety circuit50 to 360 °CSafety function: mediumDelta-T monitoringDelayed boiling protectionAlways-Stir functionBurn protectionVisual residual heat warning from a surface temperature of over 50 °CDisplay technology14-segment glass displayHousing materialDie-cast aluminium housing, sealedDegree of protection according to DIN EN 60529IP 54Dimensions (W x D x H)160 x 200 x 100 mmCountry of originMade in Germany Scope of delivery1 x IKA RET basic anodized magnetic stirrer with heating (MPN 0020133787)1 x PT 1000.60 temperature sensor, stainless steel1 x H 801 x IKAFLON 30 magnetic stir bar1 x IKAFLON 40 magnetic stir bar1 x screwdriver1 x mains lead1 x operating instructions Compatible accessories The following original accessories are available to upgrade the RET basic anodized to a fully-fledged laboratory measuring station: IKA PT wireless temperature sensor or ETS-D7 contact thermometer for wireless temperature monitoring Chemically resistant IKA synthesis blocks and dry attachments made from anodized aluminium for oil-free heating of round-bottom flasks Precisely fitting silicone protective covers, as well as H 16 V support rods and H 44 boss heads for securing wired sensors Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements and procurement service Our procurement service is available to assist with the digitalisation planning of your laboratory processes, as well as for further original accessories, spare parts or bespoke calibration. Further information and contact details can be found on our procurement service page. The IKA manufacturer’s warranty applies to the RET basic anodized: 2 years, extended to 10 years upon registration at ika.com/register within 90 days of purchase.

Sale price: €1,011.00 Manufacturer's RRP: €1,375.00 26% below manufacturer's RRP
Discount Promo
IKA RET basic magnetic stirrer with heating, aluminium base, 0025008265
IKA RET basic magnetic stirrer with heating, aluminium base, 0025008265
Manufacturer number: 0025008265

The IKA RET basic magnetic stirrer with heating (MPN 0025008265) combines a heating power of 800 watts with a compact housing measuring 160 x 200 x 100 millimetres and integrated Wi-Fi and LAN interfaces. The aluminium base ensures rapid, direct heat transfer to the sample. For B2B laboratory environments with high safety and documentation requirements, the RET basic combines a fast heating rate, precise speed control and a comprehensive, standards-compliant safety concept for continuous daily use. Compact design with high power density and direct heat transfer The base plate with a diameter of 135 millimetres is made of an aluminium alloy without any additional coating, thereby enabling particularly direct heat transfer with heating rates of up to 9 Kelvin per minute whilst maintaining uniform temperature distribution; this can be adjusted across four heating speed settings. Unlike the RET basic anodized version, there is no additional oxide layer protection against scratches and chemicals; instead, the bare metal surface transfers heat without the low resistance of a coating. Despite the high heating power of 800 watts, the housing remains ultra-compact at 160 x 200 x 100 millimetres. The stirrer therefore saves space in the fume hood, can be positioned on any standard laboratory lifting platform and is suitable for parallel experimental set-ups in confined spaces. Networked laboratory processes via Wi-Fi and LAN For integration into networked laboratory infrastructures and automated documentation processes, the RET basic is equipped as standard with Wi-Fi and LAN interfaces, as well as the wired USB-C and RS232 interfaces. This connectivity allows the magnetic stirrer to be monitored centrally, controlled remotely or integrated into higher-level software solutions, including via the IKA app. The communication interface, which is based on ASCII-based Namur commands, also enables direct device-to-device communication. For example, the RET basic can be linked to an IKA overhead stirrer: if the stirring speed of the viscous medium falls below a critical threshold, the RET basic automatically deactivates the heating. This is an important prerequisite for reliable, unattended continuous operation. Comprehensive safety concept in accordance with EN IEC 61010-2-010 With a total of 18 integrated safety features, the RET basic complies with the laboratory equipment standard EN IEC 61010-2-010 for heated laboratory equipment. System safety is further confirmed by a certificate from TÜV Süd in accordance with the NRTL standard (comparable to UL and CSA). In addition to a mechanically adjustable safety circuit (50 to 360 °C) via two separate plate sensors, the unit features Delta-T medium monitoring, sensor breakage and misalignment detection, as well as automatic heating shutdown in the event of a sudden drop in temperature, such as that caused by glass breakage. In the event of a safety shutdown, the ‘Always-Stir’ function takes effect: heating stops whilst stirring remains active to prevent delayed boiling or hotspots in the medium. A visual residual heat warning provides additional protection against burns on surfaces exceeding 50 °C. Typical applications The combination of network connectivity, direct heat transfer and a comprehensive safety concept makes the RET basic a versatile device for digitised laboratory environments: Networked laboratory processes requiring documentation, thanks to integrated Wi-Fi and LAN interfaces Unattended continuous operation through coupling with an IKA overhead stirrer via Namur commands Demanding syntheses with high safety requirements thanks to 18 safety features in accordance with EN IEC 61010-2-010 Mobile process monitoring via the IKA app Direct heat transfer via the uncoated aluminium plate Technical details Number of stirring points1Max. mixing capacity (based on water)20 litresMaximum load25 kgMotor typeBrushless DC motor (EC), 9 W output powerSpeed range50 to 1,700 rpmSetting accuracy for speed10 rpmHeating power800 WHeating plate temperatureRoom temperature to 340 °CMaximum heating rateup to 9 K/minHeating speed4 levels, individually adjustableControl accuracy with PT1000 or ETS-D5±0.5 KControl accuracy with ETS-D7 or PT wireless±0.2 KBase diameter135 mmBase materialAluminium alloy, uncoatedNetwork interfacesWi-Fi and LANData interfaces (wired)USB-C and RS232Communication standardASCII-based Namur commandsApp integrationIKA APPTimer1 second to 5,999 minutespH measurementOptional with ETS-D7 or PT wirelessCompliance with standardsEN IEC 61010-2-010, TÜV Süd NRTL-tested (UL/CSA standard)Number of safety features18Adjustable safety circuit50 to 360 °CSafety function: mediumDelta-T monitoringDelayed boiling protectionAlways-Stir functionBurn protectionVisual residual heat warning from a surface temperature of over 50 °CDisplay technology14-segment glass displayHousing materialDie-cast aluminium housing, sealedDegree of protection according to DIN EN 60529IP 54Dimensions (W x D x H)160 x 200 x 100 mmNet weight2.3 kgPower supply220 to 230 V, 50/60 HzCountry of originMade in Germany Scope of delivery1 x IKA RET basic magnetic stirrer with heating (MPN 0025008265)1 x PT 1000.60 temperature sensor, stainless steel1 x H 801 x IKAFLON 30 magnetic stir bar1 x IKAFLON 40 magnetic stir bar1 x screwdriver1 x power cable1 x operating instructions Compatible accessories The following original accessories are available to expand the RET basic: IKA PT1000.60 stainless steel temperature sensor for direct control within the medium, combined with a suitable support rod and cross-shaped sleeve for securing to the stirrer Precisely fitting silicone protective covers to protect the control panel from splashes IKA Dry attachments made of anodized aluminium for oil-free heating of round-bottom flasks directly on the aluminium plate PTFE-coated magnetic stir bars in cylindrical, oval or triangular shapes Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements and procurement service The RET basic is covered by IKA’s manufacturer’s warranty: 2 years, extended to 10 years upon registration at ika.com/register within 90 days of purchase. Our procurement service is available to help you equip your laboratory workstations with additional original accessories, spare parts or bespoke calibration to suit your specific applications. Further information and contact details can be found on our procurement service page.

Sale price: €973.50 Manufacturer's RRP: €1,324.00 26% below manufacturer's RRP
Discount
IKA RET control-visc magnetic stirrer with heating and balance, 0005020000
IKA RET control-visc magnetic stirrer with heating and balance, 0005020000
Manufacturer number: 0005020000

Electromagnetic kinematics and rheological trend metrology The physical mixing of structurally viscous or Newtonian fluids requires the precise transfer of rotational energy through a closed system. The IKA RET control-visc generates a powerful, rotating alternating electromagnetic field that synchronises the magnetic stir bar in the reaction vessel at a frequency of 50 to 1,700 revolutions per minute. A special feature of this system is the measurement of the torque trend. Without having to insert a mechanical viscometer into the medium, the control electronics record the torque trend. This analysis of dynamic viscosity changes enables the monitoring of complex macromolecular polymerisation, cross-linking or crystallisation processes on the TFT display. Thermodynamic cascade control and heat transfer The rate of chemical reactions depends strongly on temperature. The RET control-visc transfers thermal energy via a solid heating plate made of corrosion-resistant stainless steel (grade 1.4301). With a heating power of 600 watts, the system raises the surface temperature to up to 340 °C. To eliminate the thermodynamic lag between the heating plate and the reaction medium, the system operates using a PID cascade control system. By integrating an external temperature sensor (connection for PT 100 or PT 1000, dual sensor) directly into the fluid, the control system measures the temperature in the medium. The PID system proactively reduces the heating power before the defined setpoint is reached. This reduces temperature overshoot and protects heat-sensitive samples from damage caused by overheating. Gravimetric integration In traditional workflows, the precise formulation of buffer solutions or chemical syntheses requires the physical separation of gravimetry and thermodynamics. The RET control-visc integrates strain gauges directly into the mechanical architecture of the chassis, enabling the entire work surface to function as an integrated balance (measuring range 10 to 5,000 g, resolution 1 g). This integration of balance, heater and stirrer in a single unit enables the gravimetric dosing of solids or solvents directly into the reaction vessel whilst under active stirring. Digital documentation of temperature, speed and viscosity values can be transferred via the RS-232 and USB interfaces to external Laboratory Information Management Systems (LIMS). Technical details Thermodynamics & Heating Technology Heating power: 600 W Heating temperature range: Room temperature + preset up to 340 °C Work surface material: Solid stainless steel (grade 1.4301) Heating rate control: Anticipatory PID cascade control (prevents overshoot) Temperature setting and display resolution: 0.1 K Metrology & Control Engineering Viscosity measurement: Relative torque trend detection (Torque Trend) Gravimetric function: Integrated balance (measuring range: 10 to 5,000 g) Balance resolution: 1 g Temperature sensor interface: PT 100 / PT 1000 (dual sensor) pH metrology: Integrated BNC interface for direct connection of a pH probe Display: TFT display Kinematics & Mechanics Speed range: 50 to 1,700 rpm Motor power output: 9 W Speed setting and display resolution: 10 rpm Maximum stirring volume (H₂O): 20 litres Maximum stir bar length: 80 mm Construction & dimensions Work surface dimensions: Ø 135 mm System dimensions (W x H x D): 160 x 85 x 270 mm Weight: 2.7 kg Safety & Environmental Conditions Adjustable safety circuit: 50 to 380 °C (hardware shut-off) Permissible ambient temperature range: 5 to 40 °C Permissible relative humidity: max. 80 % IP rating (according to DIN EN 60529): IP 42 (protected against dripping water) Electrical & Connectivity Voltage / Frequency: 220 to 240 V / 50/60 Hz Power consumption: max. 650 W Data interfaces: USB, RS 232 Scope of delivery 1 x IKA RET control-visc magnetic stirrer 1 x PT 100.70 temperature probe 1 x magnetic stir bar (IKAFLON) 1 x protective cover (H 104) 1 x USB cable and mains lead (Important note: Support rods and boss heads for mechanically securing the PT 100 probe in the reaction vessel are not included in the scope of delivery!) WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories The RET control-visc is a precision thermodynamic instrument. In order to activate the PID cascade control, the supplied PT-100 probe must be positioned hydrodynamically correctly within the flow vortex. To achieve this, vertical locking using an IKA support rod (H 16 V) and boss head (H 44) is required, as contact between the probe and the hot vessel wall (heat conduction through the glass) can impair the control loop. For asymmetrical vessels, we offer specific magnetic stir bars (e.g. elliptical geometries) via our procurement service.

Sale price: €1,449.00 Manufacturer's RRP: €1,932.00 25% below manufacturer's RRP
Discount
IKA EUROSTAR 100 control overhead stirrer with TFT display, up to 100 litres, 0020105159
IKA EUROSTAR 100 control overhead stirrer with TFT display, up to 100 litres, 0020105159
Manufacturer number: 0020105159

The IKA EUROSTAR 100 control overhead stirrer (MPN 0020105159) represents the modernised, highly advanced mechatronic generation of professional laboratory stirrers. With a footprint that, according to the manufacturer, is reduced by up to 23 % compared to its predecessors, this powerhouse offers exceptional functional density in a minimal space. Designed for universal and highly demanding mixing tasks in a B2B laboratory environment, the system handles sample volumes of up to 100 litres (based on water) as well as highly viscous media up to 70,000 mPas. It is suitable for complex syntheses, viscous mixtures and fully documented processes in chemical, pharmaceutical and biotechnological research. Within the EUROSTAR series, the Model 100 control is the top-of-the-range model for large volumes: It shares the maximum stirring capacity of 100 litres with the identically dimensioned Model 100 digital, but additionally offers a TFT display, torque and temperature measurement, and full Wi-Fi connectivity. Compared with the Model 60 control, which has a capacity of 60 litres and a maximum viscosity of 50,000 mPas, the Model 100 covers the larger volume range. High-precision torque monitoring and real-time viscosity display An outstanding metrological feature of the control series is the integrated high-end torque sensor. With an absolute accuracy of ±1 Ncm, it enables continuous, transient torque monitoring throughout the entire mixing process. Based on this data, the internal microprocessor control calculates the exact viscosity of the medium in mPas and displays it in real time on the large TFT graphic display. Thanks to electronic speed control in the range of 30 to 2,000 revolutions per minute, the brushless DC motor dynamically adapts to changes in load. The stirring speed thus remains constant even during sudden changes in viscosity, which supports the reproducibility of the results. Extended functionality and process reliability The EUROSTAR 100 control offers tools that go beyond conventional stirring. The system features an integrated temperature measurement function (via a PT1000 interface), a rotation direction that can be reversed at the touch of a button (anti-clockwise/clockwise rotation) for the targeted disruption of flow patterns, and a programmable interval mode. An integrated vibration sensor continuously monitors the test setup for imbalances or critical vibrations and initiates an automatic safety shutdown in the event of danger. Mechanical blockages or thermal overloads are intercepted by independent safety circuits. An integrated lock button also prevents accidental changes to parameters during operation. Industry 4.0 connectivity and robust housing design With standard USB-C, RS232, Ethernet, wireless and Wi-Fi interfaces, the overhead stirrer can be integrated into automated networks and controlled and documented via the labworldsoft laboratory software. The housing, made from coated die-cast aluminium and robust thermoplastic, meets degree of protection IP 54. The brushless DC drive operates virtually wear-free and quietly, making the system suitable for low-maintenance continuous operation (100 % duty cycle) under laboratory conditions. Typical applications Process development and scale-up trials with comprehensive documentation of torque, viscosity and temperature Agitation and homogenisation of highly viscous media up to 70,000 mPas, such as resins, pastes or concentrated polymer solutions Batches of up to 100 litres in technical and pilot plants, where larger containers need to be handled Chemical syntheses with temperature monitoring via PT1000 and automatic safety shut-off Networked laboratory workstations connected to labworldsoft via Wi-Fi or LAN for centralised process documentation Technical details Drive & performance dataMotor principleBrushless DC motor (BLDC)Motor power consumption174 wattsMotor power output142 wattsMax. power at the mixing shaft136 wattsPower consumption186 wattsPermissible duty cycle100 % (designed for continuous operation)Voltage range100 to 240 V / frequency 50/60 HzMixing & viscosity dataMax. mixing capacity per mixing point (water)100 litresMaximum viscosity70,000 mPasMaximum torque at the stirring shaft200 NcmMaximum torque during short-term acceleration (30 to 600 rpm, up to 20 min)200 NcmMax. torque at 1,300 to 2,000 rpm100 to 60 Ncm (linear adjustment)Rated torque1 NmSpeed & time controlSpeed range30 to 2,000 rpm (revolutions per minute)Speed adjustmentContinuously variable via electronic controlSpeed adjustment & measurement accuracy±1 rpmSpeed measurement deviation (n > 300 rpm)±1 %Speed measurement deviation (n < 300 rpm)±3 rpmDirection of rotation reversibleYes (left-hand/right-hand rotation integrated)Intermittent operation / Interval modeYesTimerYes, integrated (setting range 1 to 6,000 minutes)Metrology & SensorsSpeed display & timer displayHigh-resolution TFT graphic displayTorque measurementIntegrated (accuracy ±1 Ncm)Viscosity measurementIntegrated with direct mPas calculation and on-screen displayConnection for external temperature sensorPT1000Temperature measurement range-10 to +350 °C (resolution 0.1 K)Temperature measurement accuracy±0.5 K plus the tolerance of the PT1000 sensor (Class A)Vibration sensorIntegrated for automatic imbalance detectionInterfaces & connectivityWireless interfacesWi-Fi/WLAN and WPAN (wireless)Wired interfacesUSB-C, RS232 and EthernetSoftware Compatibilitylabworldsoft (process automation and documentation)Design & GeometryStirrer tool mountingChuck (clamping range: 0.5 to 10 mm in diameter)Hollow shaft (can be inserted whilst stationary)Yes (inner diameter 11 mm)Mounting on standBoom rod (diameter 16 mm / length 220 mm)Housing materialCoated cast aluminium and special thermoplasticDegree of protection according to DIN EN 60529IP 54 (splash- and steam-proof)Dimensions (width x depth x height)89 x 191 x 237 mmNet weight3.9 kgPermissible ambient temperature+5 to +40 °C (relative humidity up to 80 %) Scope of delivery 1 x IKA EUROSTAR 100 control overhead stirrer (MPN 0020105159) 1 x Integrated boom rod for stand mounting 1 x universal mains lead 1 x Detailed operating instructions / safety guide Individual requirements and procurement service Original IKA system peripherals are available for the EUROSTAR 100 control: Stirring tools & shaft protection: Stainless steel and PTFE stirring elements (e.g. propeller stirrers, anchor stirrers, dissolver discs) as well as the matching IKA R 401 stirring shaft guard with hinge (MPN 0020122349) Stand accessories: Sturdy IKA telescopic stands (e.g. R 2723) and boss heads (e.g. R 270) for securing the 3.9-kilogram drive Temperature measurement technology: IKA PT1000 stainless steel temperature probes for utilising the integrated temperature monitoring directly within the medium Please make use of our technical procurement service when planning the digitalisation of your laboratory processes.WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Sale price: €2,293.50 Manufacturer's RRP: €3,058.00 25% below manufacturer's RRP
Discount
IKA EUROSTAR 60 control overhead stirrer with TFT display, up to 60 litres, 0020105158
IKA EUROSTAR 60 control overhead stirrer with TFT display, up to 60 litres, 0020105158
Manufacturer number: 0020105158

The IKA EUROSTAR 60 control overhead stirrer (MPN 0020105158) represents the modernised, highly advanced mechatronic generation of professional laboratory stirrers. With a footprint that, according to the manufacturer, is reduced by up to 23 % compared with previous models, this unit fits into laboratory layouts. Designed for universal and highly demanding mixing tasks in a B2B environment, the system processes sample volumes of up to 60 litres (based on water) as well as viscous media with a viscosity of up to 50,000 mPas. It is suitable for complex syntheses, mixing viscous substances and fully documented processes in chemical, pharmaceutical and biotechnological research. Within the EUROSTAR series, the Model 60 control is the more compact version of the top-of-the-range Model 100 control: It offers the same comprehensive sensor technology and connectivity, but with a capacity limited to 60 litres and 50,000 mPas, whilst the Model 60 digital, with the same volume, does not feature temperature measurement, direction-of-rotation reversal or wireless network connectivity. Real-time viscosity measurement via torque sensor A key feature of the control series is the integrated torque sensor. With an accuracy of ±1 Ncm, it enables continuous torque monitoring throughout the entire mixing process. The internal microprocessor control system uses these values to calculate the viscosity of the medium and displays it in mPas on the TFT graphic display. Coupled with automatic speed control in the range of 30 to 2,000 revolutions per minute, the brushless DC motor dynamically adapts to changes in load. Advanced process functions and safety architecture The EUROSTAR 60 control offers tools that go beyond conventional stirring. The system features an integrated temperature measurement function (via PT1000 interface), a rotation direction that can be reversed at the touch of a button (counter-clockwise/clockwise rotation), and a programmable interval mode. An integrated vibration sensor monitors the test setup for imbalances or critical vibrations and initiates an automatic safety shutdown in the event of danger. Mechanical blockages or thermal overloads are countered by self-contained safety circuits, whilst a lock button protects the control panel against unintentional parameter changes. Industry 4.0 readiness and robust housing design With USB-C, RS232, Ethernet, wireless (WPAN) and Wi-Fi interfaces, the overhead stirrer can be connected to a PC and controlled and documented via the labworldsoft laboratory software. The housing, made from coated die-cast aluminium and robust thermoplastic, meets degree of protection IP 54 (splash- and steam-proof). The brushless DC motor operates with virtually no wear, is quiet (52 dBA without tools) and is designed for a 100 % duty cycle in continuous operation. Typical applications Process development with comprehensive documentation of torque, viscosity and temperature for batches of up to 60 litres Stirring of viscous media up to 50,000 mPas, where a reversible direction of rotation specifically remixes sediments Syntheses and reactions with temperature monitoring via PT1000 and automatic safety shut-off in the event of imbalance or blockage Networked laboratory workstations connected to labworldsoft via Wi-Fi or LAN, where a smaller volume than that of the Model 100 control is sufficient Technical details Drive & performance dataMotor principleBrushless DC motor (BLDC)Motor power consumption168 wattsMotor power output131 wattsMax. power at the mixing shaft126 wattsPower consumption186 wattsPermissible duty cycle100 % (designed for continuous operation)Voltage range100 to 240 V / frequency 50/60 HzMixing & viscosity dataMaximum mixing volume per mixing point (water)60 litresMaximum viscosity50,000 mPasMaximum torque at the stirring shaft100 NcmMaximum torque at 30 to 200 rpm100 NcmMax. torque at 200 to 2,000 rpm100 to 60 Ncm (linear adjustment)Max. torque I / Max. torque II100 Ncm / 60 NcmRated torque0.6 NmSpeed & time controlSpeed range30 to 2,000 rpm (revolutions per minute)Speed adjustmentContinuously variable via electronic controlSpeed adjustment & measurement accuracy±1 rpmSpeed measurement deviation (n > 300 rpm)±1 %Speed measurement deviation (n < 300 rpm)±3 rpmDirection of rotation reversibleYes (left-hand/right-hand rotation integrated)Intermittent operation / Interval modeYesTimerYes, integrated (setting range 1 to 6,000 minutes)Metrology & SensorsSpeed display & timer displayHigh-resolution TFT graphic displayTorque measurementIntegrated (accuracy ±1 Ncm)Viscosity measurementIntegrated with direct mPas calculation and on-screen displayConnection for external temperature sensorPT1000Temperature measurement range-10 to +350 °C (resolution 0.1 K)Temperature measurement accuracy±0.5 K plus the tolerance of the PT1000 sensor (Class A)Vibration sensorIntegrated for automatic imbalance detectionInterfaces & connectivityWireless interfacesWi-Fi/WLAN and WPAN (wireless)Wired interfacesUSB-C, RS232 and EthernetSoftware compatibilitylabworldsoft (process automation and documentation)Design & GeometryStirrer tool mountingChuck (clamping range: 0.5 to 10 mm in diameter)Hollow shaft (can be inserted whilst stationary)Yes (inner diameter 11 mm)Mounting on standExtension rod (diameter 16 mm / length 220 mm)Housing materialCoated cast aluminium and special thermoplasticDegree of protection according to DIN EN 60529IP 54 (splash- and steam-proof)Noise level without tools52 dB(A)Dimensions (width x depth x height)89 x 191 x 237 mmNet weight3.9 kgPermissible ambient temperature+5 to +40 °C (relative humidity up to 80 %) Scope of delivery 1 x IKA EUROSTAR 60 control overhead stirrer (MPN 0020105158) 1 x integrated extension rod for stand mounting 1 x universal mains cable 1 x Detailed operating instructions / safety guide Individual requirements and procurement service Original IKA system peripherals are available for the EUROSTAR 60 control: Stirring tools & shaft guards: Stainless steel and PTFE stirring elements (e.g. propeller stirrers, anchor stirrers, dissolver discs) as well as the matching IKA R 401 stirring shaft guard with hinge (MPN 0020122349) Stand accessories: Sturdy IKA telescopic stands (e.g. R 2722) and boss heads (e.g. R 270) for securing the 3.9-kilogramme drive Temperature measurement technology: IKA PT1000 stainless steel temperature probes for utilising the integrated temperature monitoring directly within the medium Please make use of our technical procurement service when planning the digitalisation of your laboratory processes.WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Sale price: €1,834.50 Manufacturer's RRP: €2,446.00 25% below manufacturer's RRP
Discount
Topseller
IKA C-MAG HP 10 hotplate, with glass-ceramic work surface, 0003582000
IKA C-MAG HP 10 hotplate, with glass-ceramic work surface, 0003582000
Manufacturer number: 0003582000

Thermodynamic efficiency and material resistance The IKA C-MAG HP 10 is a high-performance heating system specially developed for the thermal treatment of large-volume media and aggressive chemical substances. With a heating power of 1500 W and a standing surface of 260 x 260 mm, the unit is suitable for heating vessels. The glass-ceramic plate is chemically resistant and resistant to temperature changes. Thanks to the low thermal expansion of the material, the surface remains flat even at high operating temperatures, which supports contact with the vessel. Metrological precision and system reliability The thermal parameters are controlled via a digital display, which allows precise monitoring of the setpoints. To regulate the medium temperature, the C-MAG HP 10 features an integrated interface in accordance with DIN 12878, which enables the connection of external contact thermometers (e.g. ETS-D5). The safety architecture comprises a fixed safety circuit at 550 °C and a visual ‘Hot Top’ warning indicator. The indicator points to the residual heat of the plate, even after the heating function has been switched off, as long as the surface temperature remains above 50 °C. Technical details Thermodynamics & Heating Technology Heating power: 1,500 W Heating temperature range: 50 to 500 °C Setpoint temperature setting accuracy: 5 K Fixed safety cut-off: 550 °C Heating rate of the hotplate: 5 K/min Metrology & Control Engineering Display: Digital LED display (setpoint) Connection for external temperature sensor: DIN 12878 (e.g. PT 1000) Control accuracy with sensor: ± 3 K Residual heat indicator: Visual warning signal (Hot Top indicator) Material Properties & Mechanics Surface material: Glass-ceramic (vitroceramic) Surface dimensions: 260 x 260 mm Housing material: Cast aluminium / corrosion-resistant plastic Dimensions & weight Dimensions (W x H x D): 300 x 105 x 415 mm Weight: 6 kg Permissible ambient temperature range: 5 to 40 °C Permissible relative humidity: 80 % Degree of protection according to DIN EN 60529: IP 21 Voltage: 230 V (50/60 Hz) Power consumption: 1,505 W Scope of delivery 1 x IKA C-MAG HP 10 hotplate 1 x mains cable 1 x operating instructions Important note: An external temperature sensor (e.g. PT 1000) for direct control of the medium temperature is not included as standard and must be configured separately. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories For precise thermodynamic control in the liquid phase, an external resistance thermometer (PT 1000) or an electronic contact thermometer (ETS-D series) must be connected via the DIN 12878 socket. This enables compensation for the thermal hysteresis of the glass-ceramic hotplate. You can find suitable stand rods and boss heads for securing the sensor via our procurement service.

Sale price: €759.75 Manufacturer's RRP: €1,013.00 25% below manufacturer's RRP
Discount
IKA ICC control pro 12 Compact Thermostat Package, stainless steel bath, 12 litres, 0010000415
IKA ICC control pro 12 Compact Thermostat Package, stainless steel bath, 12 litres, 0010000415
Manufacturer number: 0010000415

The IKA ICC control pro 12 compact thermostat package is a ready-to-connect complete system for temperature control in the laboratory. It combines the ICC control immersion circulator with a 12-litre stainless steel bath. For analytical test series, material testing or scale-up steps in multi-user operation, what matters is a constant temperature and a bath that withstands high thermal loads. Temperature control and pump The process engineering centrepiece of this package is the ICC control immersion circulator. The microprocessor control achieves a temperature stability of ±0.01 K. The TFT colour display shows the process parameters and presents temperature curves and programme sequences (up to 10 programmes, each with 10 segments). The integrated pressure and suction pump delivers up to 18 litres per minute and mixes the bath volume. Material robustness of the “pro 12” stainless steel bath The IB pro 12 bath is included in the scope of delivery. Unlike polycarbonate variants, the stainless steel bath offers good chemical resistance to many temperature-control media (such as water or silicone oils) and allows use of the extended working temperature range of up to 150 °C. The geometry and wall thickness of the bath can reduce heat loss to the surroundings. Connectivity, documentation and occupational safety The ICC control can be integrated into digitally networked laboratory environments. Via the integrated USB and RS232 interfaces, the thermostat package can be connected to higher-level laboratory software (such as labworldsoft®), so that temperature profiles can be recorded and procedures automated. The following safety features contribute to occupational safety in day-to-day operation: an adjustable safety circuit protects against thermal overload, a mechanical float switch provides reliable dry-run protection, and visual and audible alarm signals immediately alert laboratory staff to process deviations. Technical details Thermoregulation & Pump Specifications Thermostat type: Compact immersion circulator (ICC control) Working temperature range: Room temperature +10 K to 150 °C Temperature stability according to DIN 12876: ±0.01 K Heating power: 2,000 W Pump type: Adjustable pressure and suction pump Max. flow rate (free flow): 18 l/min Max. delivery pressure: 0.3 bar Max. suction pressure: 0.2 bar Bath equipment & materials Bath designation: IB pro 12 Bath material: Corrosion-resistant stainless steel Max. bath volume: 12.0 litres Bath opening (bottom): 255 x 127 mm, maximum 292 x 147 mm at the upper bath edge Working depth / bath depth: 150 mm Cleaning: easy to clean Electronics, interfaces & safety Display: TFT colour display showing all parameters Programme functions: Integrated programmer for 10 programmes, each with 10 segments External sensor connection: for direct connection of an external PT100 sensor Interfaces: USB-B and RS232 for PC connectivity Safety systems: Adjustable safety circuit (overheating protection), visual/audible fault alarm, liquid level float switch (dry-run protection) Mains supply: 230 V / 50/60 Hz Scope of delivery 1 x IKA ICC control immersion circulator base unit 1 x IKA stainless steel bath IB pro 12 1 x mounting bracket / bath bridge for secure installation Important note: Bath lids, cooling coils for external counter-cooling, external PT100 temperature sensors, connecting hoses and the required temperature control fluids are not included in the standard scope of delivery and must be ordered separately according to your specific application. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories At operating temperatures above 60 °C, a precisely fitting stainless steel bath lid (e.g. IKA CM.pro 12) can reduce evaporation losses. For applications at or below room temperature, dedicated cooling coils (CC2) for feeding in external cooling water are available. For temperature control directly in your sample vessel, we offer external stainless steel temperature sensors. For high-temperature operation up to 150 °C, the use of thermal fluids designed for this temperature range (e.g. IKA Labotherm) is recommended to avoid thermal decomposition of the medium. Please use our technical procurement service to configure your digitalised workstation.

Sale price: €2,236.50 Manufacturer's RRP: €2,982.00 25% below manufacturer's RRP
Discount
IKA EUROSTAR 20 high speed control overhead stirrer with TFT display, up to 6,000 rpm, 0020105161
IKA EUROSTAR 20 high speed control overhead stirrer with TFT display, up to 6,000 rpm, 0020105161
Manufacturer number: 0020105161

The IKA EUROSTAR 20 high speed control overhead stirrer (MPN 0020105161) is a compact high-speed laboratory stirrer. With a footprint that, according to the manufacturer, is reduced by up to 23 % compared to older generations of equipment, this unit offers high functional density within a minimal footprint. Designed for demanding mixing, dispersing and emulsifying tasks in a B2B laboratory environment, it processes sample volumes of up to 20 litres (based on water) and handles viscosities of up to 10,000 mPas. It is suitable for rheological investigations, ultra-fine emulsions and documented scale-up processes. Within the EUROSTAR series, the Model 20 high speed control combines the wide speed range of the Model 20 high speed digital (150 to 6,000 rpm) with the sensor technology of the control series: TFT display, torque and temperature measurement, and reversible rotation direction, though without Wi-Fi and with a wired Ethernet connection only. Torque monitoring and integrated viscosity calculation The metrological heart of the control series is an integrated torque sensor, which enables torque monitoring with an accuracy of ±1 Ncm. Based on these measured values, the internal microprocessor calculates the viscosity of the medium and displays the viscosity in mPas on the graphic display. Thanks to the electronic speed control in the high-speed range from 150 to 6,000 revolutions per minute, the brushless DC motor adapts dynamically to load changes. Advanced process functions and scope of delivery The EUROSTAR 20 high speed control features an integrated temperature measurement function (via PT1000 interface), a rotation direction that can be reversed at the touch of a button (anti-clockwise/clockwise rotation), and a programmable interval mode. The R 6000 precision stirring shaft (length 280 mm, maximum immersion depth 220 mm), included in the scope of delivery, ensures the system is ready for immediate use. A lock button protects the system against accidental changes to parameters, whilst an integrated timer and a counter function support scheduled test series. Industry 4.0 network integration and robust housing With USB-C, RS232 and Ethernet interfaces, the overhead stirrer can be connected to control computers and automated and validated via the labworldsoft laboratory software. The housing, made from coated cast aluminium and robust thermoplastic, meets degree of protection IP 54. The brushless DC drive operates with virtually no wear, is whisper-quiet (52 dBA) and is designed for a 100 % duty cycle in continuous operation. Typical applications Rheological investigations and ultra-fine emulsions with real-time viscosity display at speeds of up to 6,000 revolutions per minute High-speed dispersion with simultaneous temperature monitoring via PT1000, for example with temperature-sensitive emulsions Processes requiring reversible rotation to re-mix deposits on the supplied R 6000 stirring shaft Documented scale-up trials with connection to labworldsoft via Ethernet, if no Wi-Fi is required in the laboratory Technical details Drive & performance dataMotor principleBrushless DC motor (BLDC)Motor power consumption176 wattsMotor power output125 wattsMax. power at the mixing shaft125 wattsPower consumption176 wattsPermissible duty cycle100 % (designed for continuous operation)Voltage range100 to 240 V / frequency 50/60 HzMixing & viscosity dataMax. mixing volume per mixing point (water)20 litresMaximum viscosity10,000 mPasMaximum torque at the stirring shaft40 NcmMaximum torque at 150 to 600 rpm40 NcmMax. torque at 600 to 6,000 rpm20 Ncm (linear adjustment)Rated torque0.2 NmSpeed & time controlSpeed range150 to 6,000 rpm (revolutions per minute)Speed adjustmentContinuously variable via electronic controlSpeed adjustment & measurement accuracy±1 rpmSpeed measurement deviation (n > 300 rpm)±1 %Speed measurement deviation (n < 300 rpm)±3 rpmDirection of rotation reversibleYes (left-hand/right-hand rotation integrated)Intermittent operation / Interval modeYesTimer / counterYes, integrated (setting range 1 to 6,000 minutes)Metrology & SensorsSpeed display & timer displayHigh-resolution TFT graphic displayTorque measurementIntegrated torque sensor (accuracy ±1 Ncm)Viscosity measurementIntegrated with direct mPas calculation and on-screen visualisationConnection for external temperature probePT1000Temperature measurement range-10 to +350 °C (resolution 0.1 K)Temperature measurement accuracy±0.5 K plus the tolerance of the PT1000 sensor (Class A)Interfaces & connectivityWired interfacesUSB-C, RS232 and EthernetSoftware compatibilitylabworldsoft (process automation and documentation)Design & GeometryStirrer tool mountingQuick-release chuck (clamping range: diameters 0.5 to 10 mm)Precision stirring shaft R 6000Included in the scope of delivery (length 280 mm / max. immersion depth 220 mm)Hollow shaft (can be inserted whilst stationary)Yes (internal diameter 11 mm)Mounting on a standExtension rod (diameter 16 mm / length 220 mm)Housing materialCoated cast aluminium and special thermoplasticDegree of protection according to DIN EN 60529IP 54 (splash- and steam-proof)Dimensions (width x depth x height)89 x 191 x 306 mmNet weight5.2 kgPermissible ambient temperature+5 to +40 °C (relative humidity up to 80 %) Scope of delivery 1 x IKA EUROSTAR 20 high speed control overhead stirrer (MPN 0020105161) 1 x IKA R 6000 precision stirring shaft (length 280 mm) 1 x integrated extension rod for stand mounting 1 x universal mains cable 1 x Detailed operating instructions / safety guide Individual requirements and procurement service Compatible IKA system peripherals are available to equip the EUROSTAR 20 high speed control stirring workstation: Stand peripherals & mounting: Sturdy IKA telescopic stands (e.g. R 2722) and boss heads (e.g. R 270) for securing the 5.2-kilogram high-speed drive Safety components: Suitable IKA R 401 stirring shaft guard with hinge (MPN 0020122349) to cover the rapidly rotating shaft in accordance with accident prevention regulations Temperature measurement technology: IKA PT1000 stainless steel temperature probe for utilising the integrated temperature monitoring directly within the medium Please make use of our technical procurement service when planning the digitalisation of your laboratory processes.WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Sale price: €2,676.00 Manufacturer's RRP: €3,568.00 25% below manufacturer's RRP
Discount
IKA RCT classic magnetic stirrer with heating, aluminium base plate, 0020136400
IKA RCT classic magnetic stirrer with heating, aluminium base plate, 0020136400
Manufacturer number: 0020136400

The IKA RCT classic magnetic stirrer with integrated heating represents a highly sophisticated, thermomechanical system solution for the precise mixing, temperature control and homogenisation of low-viscosity liquids in clinical, chemical and university laboratory environments. As a reliable standard in laboratory technology, this compact unit is designed for continuous stirring tasks up to a volume of 20 litres (based on water). For demanding syntheses, media preparation or kinetic studies, homogeneous heat transfer and constant speed stability are the primary criteria for enabling reliable and reproducible experimental results whilst minimising damage to the sample material. Uniform heat distribution through aluminium heating plate technology The process engineering heart of the device is the precision-machined, round heating plate made from a high-quality aluminium alloy (diameter 135 mm). In contrast to solid ceramic plates, this aluminium heating plate is characterised by outstanding thermodynamic enthalpy transfer and extremely homogeneous temperature distribution across the entire contact surface. With a heating power of 600 watts, the system enables rapid heating of the sample media up to a heating plate temperature of 310 °C. The excellent magnetic coupling ensures that the magnetic stir bar is kept reliably in position even as viscosities increase, whilst an integrated soft-start function reliably prevents the stir bar from becoming decoupled during the start-up phase. Ergonomic operating concept and robust construction The IKA RCT classic combines tried-and-tested metallurgical hotplate technology with a durable, mechanical housing design. The clearly laid-out user interface allows for intuitive and precise adjustment of parameters via robust rotary-push controls. The housing is constructed from die-cast aluminium with a durable powder coating, which, according to the manufacturer, is designed for everyday laboratory use. A clear, high-contrast display shows the setpoint and actual values for speed and temperature in real time, enabling laboratory staff to monitor processes seamlessly at all times. Comprehensive safety management for laboratory operations The system features an independently adjustable safety circuit for the maximum hotplate temperature, which immediately shuts down the system in the event of a malfunction. An integrated residual heat indicator provides a visual warning to laboratory staff of the risk of burns even after the unit has been switched off, as long as the hotplate surface remains hot. The housing has degree of protection IP 42. Technical details Stirring & metrological specifications Number of stirring points: 1 Max. stirring volume per stirring point (H₂O): 20 litres Motor power output: 9 W Speed range: 50 to 1,500 rpm Speed adjustment: Continuously variable via rotary-push control Stir bar length: 20 to 80 mm Thermodynamics & heating function Heating power: 600 W Heating temperature range: Room temperature (plus device-specific self-heating) to 310 °C Temperature setting resolution: 1 K Safety temperature setting range: 50 to 360 °C Heating rate (1 l H₂O): 6.5 K/min Control accuracy with external sensor: ± 1 K Construction, materials & geometry Base plate material: High-quality aluminium alloy (not a ceramic plate) Dimensions of base plate: Ø 135 mm (round) Housing material: die-cast aluminium, powder-coated Overall dimensions (W x H x D): approx. 160 x 85 x 270 mm Net weight: approx. 2.4 kg Degree of protection according to DIN EN 60529: IP 42 Electronics & Safety Display: Clear display showing setpoint and actual values Connection for external temperature sensor: Available (e.g. PT1000) Safety systems: Adjustable safety circuit, residual heat warning, overheating protection Power supply: 220–230 V / 50/60 Hz Scope of delivery 1 x IKA RCT classic magnetic stirrer base unit (MPN: 0020136400) 1 x mains cable 1 x operating instructions Important note: An external temperature sensor (e.g. PT1000), stand rods, heating baths and synthesis attachments are not included as standard and must be ordered separately according to your specific application. Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories To ensure the IKA RCT classic integrates seamlessly into your existing laboratory infrastructure, we offer a comprehensive range of original accessories. For high-precision temperature control directly within the medium, we recommend connecting an external stainless steel temperature sensor (PT1000). To secure this in place, our range includes suitable stand rods, boss heads and flexible mounting brackets. To protect your glassware and optimise enthalpy exchange, we also offer original IKA heating baths and bespoke aluminium synthesis heads. Please make use of our technical procurement service to tailor the design of your laboratory workstations to your specific requirements. The IKA manufacturer’s warranty applies to the RCT classic: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.

Sale price: €784.50 Manufacturer's RRP: €1,046.00 25% below manufacturer's RRP
Discount
IKA Compact Thermostat Package ICC control IB R RO 15 eco, polycarbonate bath, 0010002474
IKA Compact Thermostat Package ICC control IB R RO 15 eco, polycarbonate bath, 0010002474
Manufacturer number: 0010002474

The IKA ICC control IB R RO 15 eco compact thermostat package represents a highly advanced, mechatronic system solution for the precise temperature control and simultaneous mixing of sample media in clinical, biological and chemical laboratory environments. This ready-to-connect complete system combines the immersion thermostat of the ICC control series with a specialised, transparent plastic bath and the RO 15 magnetic stirrer. For demanding analytical test series, enzymatic reactions or sample preparation in multi-user operation, temperature stability and visual monitoring of the samples are the primary criteria for reproducible results. Intelligent thermoregulation and high-performance kinetics The process engineering heart of this package is the ICC control immersion thermostat. Equipped with a sophisticated microprocessor control system, the unit achieves a temperature stability of ±0.01 K. A high-resolution, high-contrast TFT colour display guides the user intuitively through all process parameters and allows the visual representation of temperature curves as well as integrated program sequences (up to 10 programs, each with 10 segments). The integrated, powerful pressure and suction pump, with a flow rate of up to 18 litres per minute, ensures mixing and temperature distribution throughout the bath volume. Geometric optimisation for synchronous magnetic stirring processes The material-scientific and design-related distinctive feature of the supplied IB R RO 15 eco plastic bath lies in its specialised geometry. This transparent bath made of impact-resistant polycarbonate (PC) is dimensioned and modified at the base so that it can be mounted onto a multi-position magnetic stirrer (such as the IKA RO 15 series). This structural synergy enables laboratory staff to heat sample vessels precisely in the water bath whilst simultaneously stirring them synchronously through the bath base via magnetic coupling. The transparent bath allows a view of the samples. Connectivity, documentation and safety features The electronic system architecture of the ICC control is consistently geared towards the requirements of modern, digitised laboratories. Via integrated USB and RS232 interfaces, the thermostat package can be integrated into higher-level laboratory software, which supports data acquisition and documentation. Safety features include an adjustable safety circuit against thermal overload, a mechanical float switch as dry-run protection, and visual and audible alarm signals. Technical details Thermoregulation & pump specifications Thermostat type: Compact immersion thermostat (ICC control) Working temperature range: Room temperature +10 °C to 80 °C (in the polycarbonate bath, water only) Temperature stability according to DIN 12876: ±0.01 K Pump type: Adjustable pressure and suction pump Max. flow rate (free flow): 18 l/min Max. delivery pressure: 0.3 bar Max. suction pressure: 0.2 bar Bath geometry & materials Bath designation: IB R RO 15 eco Bath material: High-quality polycarbonate (PC), transparent and dimensionally stable Functional geometry: Optimised for use with multi-position magnetic stirrers (specifically the IKA RO 15) Max. bath volume: approx. 15 litres Cleaning: Resistant to mild laboratory cleaning agents; can be wiped clean without damaging the material Electronics, interfaces & safety Display: High-resolution TFT colour display for showing all transient parameters Program functions: Integrated programmer for 10 programs, each with 10 segments External sensor connection: for direct connection of a PT100 sensor Interfaces: USB-B and RS232 for reliable PC connectivity Safety systems: Adjustable safety circuit (overheating protection), visual/audible fault alarm, liquid level float switch (dry-run protection) Mains supply: 230 V / 50/60 Hz Scope of delivery 1 x IKA ICC control immersion thermostat base unit 1 x IKA plastic bath IB R RO 15 eco (System MPN: 0010002474) 1 x IKA RO 15 magnetic stirrer (15 stirring positions) 1 x mounting bracket / bath bridge for secure installation 1 x mains cable 1 x operating instructions Important note: External PT100 temperature sensors, bath lids and test tube holders are not included in the standard scope of delivery and must be ordered separately according to your specific application. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & accessories The package includes the IKA RO 15 multi-position magnetic stirrer with 15 stirring positions for glass vessels up to 250 ml. To minimise evaporation losses and reduce energy consumption at operating temperatures above 60 °C, matching polycarbonate bath lids and floating insulating balls are available. For precise temperature control directly within your sample vessel, an external PT100 temperature sensor can be connected. For automated control and comprehensive documentation of your temperature profiles, the system can be seamlessly integrated with the labworldsoft® laboratory software. Please use our technical procurement service to configure your digitalised workstation.

Sale price: €4,234.50 Manufacturer's RRP: €5,646.00 25% below manufacturer's RRP
Discount
Topseller
IKA RET control-visc white Magnetic Stirrer with Balance, Enamelled Heating Plate, 20 L, 0005030000
IKA RET control-visc white Magnetic Stirrer with Balance, Enamelled Heating Plate, 20 L, 0005030000
Manufacturer number: 0005030000

Anyone wishing to monitor not only the temperature and speed but also the weighed mass during a stirring process would normally need to set up a separate weighing module alongside the stirrer. The IKA RET control-visc white (0005030000) integrates a weighing function with a range of 10 to 5,000 grams directly into the heated magnetic stirrer, combined with a technical enamel work surface, a TFT display and a connection for pH measurements. Integrated weighing function up to 5,000 grams The weighing function covers a range from 10 to 5,000 grams with an accuracy of ±(0.3 % plus 2 grams); the maximum permissible load for the weighing function is 5 kilograms. This allows, for example, the quantity of a substance added to be checked directly at the stirring station, without having to transfer the vessel to a separate balance in the meantime. Enamelled hotplate with high temperature accuracy The round heating surface, with a diameter of 135 millimetres, is made of technical enamel and covers a heating temperature range from 0 to 340 °C (room temperature plus self-heating), with a setting accuracy of 0.1 Kelvin at the plate. The maximum medium temperature with a connected probe is 270 °C, and the heating power is 600 watts. pH measurement and TFT display for process control A pH electrode can be connected via a BNC socket, allowing the pH value to be monitored directly on the unit whilst stirring. All values, including setpoints and actual values for speed and temperature, are shown on a TFT display; a graph function is also available for the graphical representation of process trends. Stirring up to 20 l with disengagement detection The speed range extends from 50 to 1,700 revolutions per minute, adjustable in increments of 10 revolutions per minute; stirring rods from 20 to 80 millimetres in length can be used. A disengagement detection system alerts the user when the stirring rod loses its magnetic coupling with the drive, particularly useful for viscous or inhomogeneous media, where an unnoticed stoppage of the stirring rod would otherwise only be detected at a late stage. The maximum load on the base is 25 kilograms. Typical applications With its integrated weighing function, pH connection and high temperature accuracy, the RET control-visc white is technically suitable for: Titrations and dosing processes with direct mass control at the stirring point Syntheses requiring a temperature accuracy of 0.1 Kelvin at the hotplate Combined pH and temperature monitoring during stirring Processes with documented progress via the integrated graph function Stirring processes up to 20 l with varying viscosity, monitored via viscosity trend measurement Selection guide: control-visc compared to other digital IKA stirrers Within the range of digital IKA stirrers, the control-visc model offers the most comprehensive range of additional features, whilst providing the same stirring capacity as the IKA Plate (RCT digital): ModelWeighing functionpH connectionStirring capacity (H2O)FootprintRET control-visc white (this unit)Yes, 10 to 5,000 gYes, BNC20 lTechnical enamel, Ø 135 mmIKA Plate (RCT digital)NoNo20 lAluminium, Ø 135 mmC-MAG HS 7 controlNoNo20 lCeramic, 180 x 180 mm If you require neither a weighing function nor a pH connection, the IKA Plate (RCT digital) and the C-MAG HS 7 control offer the same stirring capacity without these additional functions. Differences from comparable IKA stirrers The IKA Plate (RCT digital) offers the same stirring capacity of 20 l, but does not include a weighing function or a pH connection and features an aluminium base instead of an enamelled one. The IKA C-MAG HS 7 control offers a higher heating power of 1,000 watts, also without a weighing function. For applications with a similar range of functions, but without the special white finish, IKA also offers the RET control-visc in the standard colour. Technical details Number of stirring points1Max. stirring capacity (H2O)20 lMaximum load25 kgMotor power output9 WSpeed range50 to 1,700 rpm, setting accuracy 10 rpmStir bar length20 to 80 mmStir bar disengagement detectionYesHeating power600 WHeating temperature range0 to 340 °C (room temperature plus self-heating), setting accuracy 0.1 KConnection for external temperature sensorPT100 / PT1000 (dual sensor)Max. medium temperature / setting accuracy270 °C / 0.1 KSafety circuit adjustable50 to 380 °CWeighing function10 to 5,000 g, accuracy ±(0.3 % + 2 g), maximum load 5 kgpH measurement functionYes, BNC socketAdditional functionsInterval operation, viscosity trend measurement, timer, graph function, programmesInterfacesRS232, Micro-USBBase material / dimensionsTechnical enamel, Ø 135 mmDimensions (W x H x D)160 x 85 x 270 mmWeight2.7 kgIP ratingIP 42 (DIN EN 60529), sealed construction designed for long-term operationMains connection220 to 240 V, 50/60 Hz, 650 W (other voltage variants: 115 V / 100 V available) Scope of delivery 1 x IKA RET control-visc white magnetic stirrer with heating and weighing function (0005030000) 1 x PT 100.70 temperature probe 1 x IKAFLON 30 magnetic stir bar 1 x IKAFLON 40 magnetic stir bar 1 x screwdriver 1 x H 104 protective cover for RET control 1 x USB cable (USB-A to Micro-B), 2 m Use, installation, maintenance and disposal With an IP 42 protection rating, the RET control-visc white is protected against foreign bodies larger than 1 millimetre and water dripping at an angle; according to the manufacturer, its sealed design is intended for long-term operation. The temperature of the installation surface rises by up to 17 Kelvin during one hour of continuous stirring; this should be taken into account when using the weighing function in the immediate vicinity of the heating plate, as heat can affect the measurement accuracy of external precision scales. The supplied H 104 protective cover provides additional protection for the control panel against splashes. At the end of its service life, as an electrical appliance, the unit must not be disposed of with household waste but must be placed in the separate collection for waste electrical and electronic equipment; the manufacturer’s WEEE registration number is DE 66784213. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Individual requirements and procurement service Additional original accessories for the RET control-visc white are available on request, such as pH electrodes, support plates, reaction blocks, oil bath attachments and replacement protective covers. Through our procurement service, we also assist you with spare parts, calibrations and the standardisation of equipment across multiple workstations. Further information and contact details can be found at our procurement service. Frequently Asked Questions How accurate is the integrated weighing function?The weighing range is from 10 to 5,000 grams with an accuracy of ±(0.3 % plus 2 grams); the maximum load capacity is 5 kilograms. Is a pH electrode included in the scope of delivery?No, the BNC socket for connecting a pH electrode is provided, but the electrode itself must be purchased separately. How does the ‘white’ version differ from the standard RET control-visc?According to the data sheet, it is a standalone version in a different colour with its own data sheet; the core technical specifications are comparable to those of the standard model. Can heating take place simultaneously whilst weighing?The weighing function is designed as an integrated additional function of the stirrer; details regarding simultaneous heating or stirring are available on request. Can the process progression be analysed graphically?Yes, the TFT display offers an integrated graph function that allows temperature and speed curves to be monitored directly on the unit whilst stirring. What interfaces are available for connection to a control system?The RET control-visc white features an RS232 interface as well as a micro-USB port, via which the unit can also be connected to a control system. Is a temperature sensor included in the scope of delivery?Yes, a PT 100.70 temperature sensor is included; additional PT 1000 sensors can be connected for other applications. How should the RET control-visc white be disposed of correctly?As an electrical appliance, it should be taken to a collection point for waste electrical and electronic equipment rather than disposed of with household waste; the manufacturer’s WEEE registration number is listed in the section on ‘Use, installation, maintenance and disposal’.

Sale price: €1,495.50 Manufacturer's RRP: €1,994.00 25% below manufacturer's RRP