Skip to main content Skip to search Skip to main navigation

IKA MF 10 basic micro-fine mill (drive), 3,000 – 6,500 rpm, 0002836000

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA MF 10 basic micro-fine mill (drive), 3,000 – 6,500 rpm, 0002836000"

For the fine final grinding of larger sample quantities, a batch mill is rarely the most efficient solution; in such cases, a continuous-flow mill is required. The IKA MF 10 basic is exactly that: a drive for an inline micro-fine mill with a speed range of 3,000 to 6,500 rpm; the grinding head is selected separately to suit the application.

Continuous fine grinding, 3,000 to 6,500 rpm

The drive consumes 1,000 W and delivers 500 W, significantly more than the IKA M 20 batch mill, whilst operating in an inline process, whereby the material to be ground passes through the mill continuously rather than in discrete batches. As with the M 20, the operating principle combines cutting and impact crushing; the stainless steel working surface is easy to clean.

Select grinding head and sieve separately

The drive is supplied without a grinding head; you can choose between the MF 10.1 cutting grinding head and the MF 10.2 impact grinding head, both of which are easily interchangeable. Sieves ranging from MF 0.25 to MF 4.0 are available to achieve the desired final particle size; the fineness of the ground material can be controlled via the sieve mesh size without having to change the grinding head itself.

Duty cycle and connection

The duty cycle is 120 minutes of operation followed by a 30-minute pause, which is significantly longer than that of the batch-operating M 20, in keeping with its continuous operation. Measuring 320 x 380 x 300 mm and weighing 9.7 kg, the drive is larger and heavier than the M 20; the power consumption is 1,000 W at 230 V, and the degree of protection is IP 22 in accordance with DIN EN 60529.

Mains connection and plug variants

For different plug standards, IKA offers the H 11 mains cable with Euro, UK, Swiss or US plugs as a separate accessory, suitable for the respective country-specific version. The drive housing itself is rated for 230 V; versions for different mains voltages are available with voltage options for 100 to 115 V.

When inline grinding is worthwhile

As soon as a sample has already been pre-ground and needs to be reduced to a defined final particle size in a single operation, a continuous process is usually faster than running several batches through a batch mill one after the other. The MF 10 basic is therefore particularly suitable for larger sample quantities where the particle size must be consistently maintained within the selected sieve size, for example in quality control or for recurring formulations.

Cutting grinding head or impact grinding head

The choice of grinding head depends on the sample: The MF 10.1 cutting grinding head is more suitable for fibrous or tough materials that need to be cut rather than crushed, whilst the MF 10.2 impact grinding head is designed for brittle, hard materials that are broken down by impact. Both can be swapped on the drive without the need for tools, meaning that the same MF 10 basic can be used for different types of samples within the same laboratory without the need to maintain two separate mills.

From pre-grinding to fine grinding

In practice, the MF 10 basic is often used as a second step following a batch mill such as the IKA M 20: This mill handles the coarse pre-grinding of hard pieces, whilst the MF 10 basic subsequently carries out continuous fine grinding to the particle size required for analysis or further processing. Where only a single process step is required and the feed material is already in small pieces, the MF 10 basic is sufficient on its own.

Typical applications

  • Continuous fine grinding of larger throughput volumes
  • Final grinding following prior coarse comminution
  • Samples where the final particle size is to be defined by a sieve
  • Varying grinding tasks with interchangeable cutting or impact grinding heads

Technical details

Process typeInline
Operating principleCutting / impact crushing
Motor power input / output1,000 W / 500 W
Speed range3,000 to 6,500 rpm
Duty cycle ON / OFF120 min / 30 min
Grinding head included in the scope of deliveryNo, selectable separately (MF 10.1 or MF 10.2)
Dimensions (W x H x D)320 x 380 x 300 mm
Weight9.7 kg
Connected load230 V, 50/60 Hz, 1,000 W (other voltage options available)
Degree of protectionIP 22 (DIN EN 60529)

Scope of delivery

  • 1 x MF 10 basic micro-fine mill drive

The grinding head (MF 10.1 or MF 10.2), sieves and mains cable are separate accessories and are not included in the scope of delivery for the drive.

Regulatory information

This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.

Selection guide and service

The MF 10 basic complements, rather than replaces, the IKA M 20 universal mill: The M 20 operates as a batch mill with a fixed high speed for pre-grinding to coarse grinding of hard, brittle samples up to 250 ml, whilst the MF 10 basic grinds continuously and more finely, with a variable speed range and a selectable grinding head. Both are among the classic IKA mills alongside the MultiDrive platform. As an electrical appliance, the MF 10 basic is subject to the WEEE Directive. IKA provides a 2-year manufacturer’s warranty, which is extended to 3 years upon registration at ika.com/register within 90 days of purchase. Through our procurement service, we can assist you in selecting the appropriate grinding head and sieves for your target particle size.