IKA MTT 40.10 Disposable grinding cups, titanium beaters, 40 ml, 10 pieces, 0020015380
€160.55
% Manufacturer's RRP: €169.00 5% below manufacturer's RRP
- Disposable grinding cup with titanium beater
- Reduces stainless steel abrasion
- Impact crushing for 40 ml volumes
- Suitable for geochemical trace analysis
- Closed cup, handling of toxic substances only after your own risk assessment
- Pack of ten disposable vessels
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA MTT 40.10 Disposable grinding cups, titanium beaters, 40 ml, 10 pieces, 0020015380"
Kinetics of impact comminution and its relevance to materials science
In the analytical sample preparation of hard, brittle matrices (such as rocks, soil samples or mineral solids), the application of substantial mechanical energy is essential. The IKA MTT 40 single-use grinding cups operate on the process principle of high-speed impact and percussion comminution on an isolated 40-ml scale. Driven by the magnetic coupling of the IKA Tube Mill base station at up to 25,000 revolutions per minute, the integrated rotor transfers immense kinetic energy to the solids. The resulting radial shock waves overcome the molecular binding forces of the sample and transform it into a fine-powdered matrix. The key process-related modification to this cup lies in the material properties of the impact tool: it is made of solid titanium rather than conventional stainless steel.
Metallurgical interference and abrasion prevention
A fundamental mechanical problem when comminuting hard, abrasive samples is tribological tool wear. The micro-collisions between the matrix and a conventional stainless steel beater inevitably lead to metallic abrasion. This introduction of foreign ions (specifically iron, chromium and nickel) results in significant spectroscopic interference and metrological errors in sensitive trace analysis (such as AAS, ICP-OES or ICP-MS). The use of the MTT 40 titanium beater reduces this specific metallurgical contamination. Titanium exhibits excellent mechanical toughness and reduces the risk that, during geochemical or environmental analytical investigations, the sample’s original heavy metal content (blank value) is distorted by the grinding tool.
Aerosol containment and reduction of carry-over
The high-speed comminution of extremely hard samples induces significant thermodynamic stress (exothermic heat build-up). The chamber wall, made of thermoplastic, absorbs these kinetic impacts and thermal loads without fracturing. When grinding toxic or biohazardous samples, the closed cup also functions as a tightly sealed containment system. The process takes place in the closed cup, which can protect the user from respirable aerosols. Toxic substances should only be handled after your own risk assessment. Finally, the fundamental design principle of a ‘single-use’ vessel helps to reduce analytical cross-contamination (carry-over) between consecutive batches, as the thermodynamically demanding decontamination process is not required at all.
Technical details
- Product type: Single-use grinding cup / single-use milling tube
- Tool geometry: Permanently fitted standard beater made of pure titanium
- Processing principle: Impact and percussion comminution (dry milling)
- Maximum usable volume: 40 ml
- Material (vessel): Impact-resistant, transparent thermoplastic
- Analytical focus: less stainless steel abrasion (Fe, Cr, Ni) in trace analysis
- Health and safety: Closed cup, handling of toxic substances only after your own risk assessment
- Compatibility (drive): Exclusively compatible with the IKA Tube Mill (control / 100)
- Packaging unit (PU): 10 pieces per set
Scope of delivery
-
10 x IKA MTT 40 disposable grinding cups (titanium beater, 40 ml)
(Important note: The IKA Tube Mill drive unit is not included in the scope of delivery!)
Individual requirements & accessories
The MTT 40.10 grinding cups are highly specialised consumables for analytical solid-state spectroscopy. The metrological selection of the correct cup is essential: for standard grinding applications where the iron content of the sample is irrelevant, choose the standard MT 40 cup (stainless steel beater) for economic reasons. However, as soon as the integrity of element-specific trace analysis is required, switching to this MTT version with a titanium rotor is advisable in order to avoid systematic measurement errors. Please contact our procurement service at any time for strategic demand planning of your analytical consumables.