Macherey-Nagel reagent case with PF-3 Pool, solid chlorine, 934119

The reagent case with PF-3 Pool and solid chlorine reagent from Macherey-Nagel contains the PF-3 Pool compact photometer and four VISOCOLOR ECO test kits for the classic swimming pool parameters chlorine (free and total), pH, cyanuric acid and alkalinity. According to the manufacturer, it is intended for the analysis of swimming pool samples, has room for further test kits and can be equipped individually.

Tests included

PF-3 Pool compact photometer

The PF-3 Pool measures at three LED wavelengths (450, 530 and 590 nm) in round cuvettes with 16 mm outer diameter. The cuvette slot is open; according to the manual, the instrument is insensitive to extraneous light. It stores 50 measured values with date and time and transfers them via mini-USB; the free NANOCOLOR data export software exports the data. The housing is dust-tight and waterproof to IP68 (test conditions according to the manual: 1 m water depth, 1 hour). The manufacturer recommends calibrating the instrument with the calibration cuvette at least once a year.

According to the flyer, the PF-3 Pool also evaluates further VISOCOLOR ECO tests, for example for bromine, chlorine dioxide, fluoride and iron. They are not part of the case but are also available.

Solid or liquid chlorine

Both pool cases differ only in the chlorine test. This case contains Chlorine 6: measuring range 0.05 to 6.00 mg/L Cl₂, 200 tests, test kit shelf life 2 years, a solid powder as the first reagent. The reagent case with PF-3 Pool and liquid chlorine reagent (934118) contains Chlorine 2: measuring range 0.05 to 2.00 mg/L Cl₂, 150 tests, test kit shelf life 1.5 years, liquid reagents that are dosed in drops. Alkalinity, cyanuric acid and pH are the same in both cases. The manufacturer gives the shelf life of the case as 1 year for both versions; according to the brochure, the TA alkalinity test also has a shelf life of 1 year. Anyone who has to measure chlorine values above 2 mg/L chooses the case with Chlorine 6.

Typical applications

• Water analysis for swimming pools and their operators
• On-site monitoring of chlorine and pH
• Determination of cyanuric acid and alkalinity (total alkalinity)
• Use in the laboratory and at all sampling points

Technical details

The hazardous substance rows show the labelling of the product as a whole according to Section 2.2 of the safety data sheet. The individual reagents are classified separately in the manufacturer’s safety data sheet. The H351 labelling is due to the cyanuric acid reagent Cya-1. The manufacturer’s safety data sheet should be read before use.

Scope of delivery

• 1 case with foam insert and PF-3 Pool compact photometer
• VISOCOLOR ECO test kits for alkalinity, chlorine, cyanuric acid and pH (REF in the table)
• 1 calibration cuvette and 4 empty cuvettes
• 1 beaker and 1 syringe (5 mL)
• 3 batteries (AA)
• PF-3 manual, booklet with the VISOCOLOR ECO test instructions, certificate

Regulatory information

The PF-3 photometer included falls under the ElektroG as an electrical appliance. The manufacturer MACHEREY-NAGEL GmbH & Co. KG is registered under WEEE registration number DE 18812169. Information on how to return old appliances can be found on the Environment and Disposal page.

Individual requirements and procurement service

Refill packs for the test kits are also available. Enquiries about accessories, equipping with further tests or larger quantities are handled by our procurement service.