Skip to main content Skip to search Skip to main navigation

Memmert IPP55 Peltier-cooled incubator, 53 L, SingleDISPLAY, 0 to 70 °C

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert IPP55 Peltier-cooled incubator, 53 L, SingleDISPLAY, 0 to 70 °C"

When cultures or reagents need to be kept at a constant cool temperature overnight without having to reserve a separate fridge in the laboratory, the Memmert IPP55 Peltier cooling incubator reliably takes care of this task: it maintains samples and cultures at precise temperatures between 0 and +70 °C, even well below room temperature. With an internal volume of 53 litres, the unit offers significantly more capacity than the compact IPP30 series and is therefore suitable for laboratories that regularly need to store or incubate larger quantities of samples or several parallel batches at cool temperatures.

Peltier cooling instead of a compressor

Instead of a conventional compressor-based cooling system, the IPP55 operates using a Peltier element integrated into the rear panel, which both cools and heats. A single system thus covers the entire setting temperature range from 0 to +70 °C, with a setting accuracy of 0.1 °C. A Pt100 sensor of DIN Class A quality, measured using the 4-wire method, provides the basis for temperature control. A Peltier-powered recirculation fan forces the air inside the chamber to circulate and distributes it evenly throughout the interior.

SingleDISPLAY: all values at a glance

The ControlCOCKPIT SingleDISPLAY clearly displays the actual and setpoint temperatures on a TFT colour graphic display. The log data from the internal data logger can be read out and managed via the integrated Ethernet interface; a time-limited trial version of the AtmoCONTROL software is available for download for this purpose. The TwinDISPLAY variant IPP55plus is available for full programming, including a USB port and the supplied AtmoCONTROL software without the need for a separate licence.

Safety, door and interior

In addition to the electronic temperature control, a mechanical temperature limiter monitors operation, ensuring that a second, independent safety level remains active even in the event of a fault in the electronic control system. The fully insulated stainless steel door, featuring a two-point locking mechanism and an inner glass door, allows for visual inspection of the interior without having to open the outer door every time, thereby avoiding disruption to the internal temperature. The interior accommodates up to 4 shelves with a total load capacity of 80 kilograms and a maximum of 20 kilograms per shelf, allowing several sample series to be arranged side by side in a clear and organised manner. An electropolished stainless steel grid shelf is included as standard; additional grid shelves can be ordered as required.

Dimensions and capacity

With internal dimensions of 400 × 400 × 330 millimetres (depth reduced by 10 millimetres due to the built-in fan), the IPP55 offers sufficient space for several grid shelves stacked on top of one another. The external dimensions of 585 × 784 × 514 millimetres are increased by 56 millimetres due to the door handle and by a further 111 millimetres in depth due to the Peltier rear panel, which must be taken into account when planning the layout in the laboratory. With a connected load of around 275 watts (230 V or 115 V, 50/60 Hz) and a net weight of approximately 52 kilograms, the unit sits between the compact IPP30 series and the large-volume IPP110eco model, whilst remaining easy to handle for transport into an existing laboratory with a gross weight of around 71 kilograms.

Data logging for documentation and quality assurance

Via the Ethernet interface, the internal data logger continuously records the temperature history, enabling cooling incubations to be traced and documented retrospectively, for example for internal quality assurance records or laboratory accreditations. The AtmoCONTROL software is available for download as a time-limited trial version for reading and managing the log data; for permanent, licence-free use, including full remote programming via Ethernet and USB, Memmert offers the IPP55plus, a TwinDISPLAY variant that comes with AtmoCONTROL included as standard. This distinction allows users to choose between the more streamlined SingleDISPLAY version and the fully equipped TwinDISPLAY version, depending on their documentation requirements.

Typical applications

With an internal volume of 53 litres and a temperature range of 0 to +70 °C, the IPP55 is suitable for cooled incubation tasks that cannot be covered by conventional heated incubators, particularly where medium-sized sample quantities need to be kept stable at constant low temperatures over extended periods:

  • Cooled incubation of microbiological samples and cultures at constant temperatures below room temperature
  • Storage of temperature-sensitive reagents and reference materials in day-to-day laboratory work
  • Parallel processing with moderate space requirements thanks to 4 shelves and a total load capacity of 80 kilograms
  • Quality assurance and research requiring reproducible temperatures above and below room temperature
  • Documented cold storage with continuous logging via the integrated data logger

Technical details

Internal volume53 litres
Internal dimensions (W×H×D)400 × 400 × 330 mm (depth reduced by 10 mm due to the fan)
External dimensions (W×H×D)585 × 784 × 514 mm (+56 mm door handle, +111 mm Peltier rear panel)
Setting temperature range0 to +70 °C
Working temperature range (without lighting)at least 20 °C below room temperature to +70 °C
Setting accuracy0.1 °C
Sensors1× Pt100 DIN Class A, 4-wire measurement
Cooling/heating principlePeltier element, integrated into the rear panel
VentilationForced internal air circulation via Peltier recirculation fan
ControlControlCOCKPIT SingleDISPLAY, TFT colour graphic display
Temperature monitoringElectronic + mechanical temperature limiter
DoorFully insulated stainless steel door with 2-point locking mechanism, internal glass door
Max. load80 kg in total / 20 kg per shelf
Max. number of shelves4
InterfacesEthernet (data logger readout)
Voltage/Power230 V or 115 V, 50/60 Hz, approx. 275 W
Environmental conditions+16 to +40 °C, max. 70 % relative humidity (non-condensing), max. 2,000 m above sea level
Packaging dimensions730 × 950 × 670 mm
Net weight/Gross weightapprox. 52 kg / approx. 71 kg

Scope of delivery

  • 1× Memmert IPP55 Peltier-cooled incubator (basic unit)
  • 1× stainless steel grid shelf, electropolished
  • 1× factory calibration certificate (calibration at +10/+25/+40 °C)

Regulatory information

Manufacturer’s WEEE registration number (Memmert GmbH + Co. KG, Stiftung EAR): DE 66812464.

Individual requirements & procurement service

Do you require additional accessories such as further stainless steel grid shelves, a bespoke calibration or advice on the appropriate model size within the IPP series? Our procurement service will be happy to assist you with special enquiries and spare parts. As factory options, Memmert also offers DAkkS calibration according to DKD-R 5-7, IQ/OQ documents and IQ/OQ qualification. We order these with the device on request.

Volume: 53 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20164 for sizes 50, 55 and 75
Manufacturer number: E20164

The E20164 stainless steel grid is an electropolished shelf for Memmert cabinets in sizes 50, 55 and 75. It fits universal ovens, incubators, Peltier cooling incubators and the HCP50 humidity chamber, 37 models in total. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF55 or UN55.The load per shelf is 20 kg for all models, only for the HCP50 it is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Environmental tests and environmental simulations in the HCP50 humidity chamberSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf. The HCP50 comes with a perforated shelf as standard; the grid is optional there.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UF55142053UF55plus142053UN55142053UN55plus142053UF75262074UF75plus262074UN75262074UN75plus262074UF55m142053UF55mplus142053UN55m142053UN55mplus142053UF75m262074UF75mplus262074UN75m262074UN75mplus262074UN55pa142053UN75pa262074IF55142053IF55plus142053IN55142053IN55plus142053IF75262074IF75plus262074IN75262074IN75plus262074IF55m142053IF55mplus142053IN55m142053IN55mplus142053IF75m262074IF75mplus262074IN75m262074IN75mplus262074IPP55142053IPP55plus142053HCP501 (perforated shelf)51556The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP50Scope of delivery1 stainless steel grid, electropolished (E20164)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €65.36
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €46.44
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744

The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. The size corresponds to the number in the unit name, for example UF30 or UN30.Separate stacking kits are also available for HCP150, HCP240 and for ICO50, 180 and 240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorIncubating several sample series at the same time in research and medicine, for example in the IF110Environmental tests and environmental simulations in the HCP105 humidity chamberSuitable forModelSizeInterior volume (l)IF110bw110108UF303032IF110110108UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574IF30plus3032IN30plus3032IF303032IN303032IF55plus5553IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553UF110plus110108UN110110108UN110plus110108IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032HPP110eco110108HCP505056HCP105105107IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108Scope of delivery1 stacking kit (4 pieces)Individual requirements & procurement serviceFor the stacking kits for HCP humidity chambers and ICO CO₂ incubators, for base frames and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €61.92
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02072 for sizes 55 and 75
Manufacturer number: B02072

The stainless steel slide-in drip tray B02072 is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 1.5 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04358). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €74.82
memmert untergestell nivellierbar
Memmert levelling base frame B29747, height 600 mm, for sizes 55 and 75
Manufacturer number: B29747

B29747 is a levelling base frame with a height of 600 mm for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.A flat base frame with a height of 130 mm is also available (B33659). The mobile version with a height of 660 mm is also available (B29748). The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight600 mmScope of delivery1 levelling base frame, height 600 mmIndividual requirements & procurement serviceFor the flat and the mobile version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €300.14
Memmert levelling base frame B33659, height 130 mm, for sizes 55 and 75
Manufacturer number: B33659

The levelling base frame B33659, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.The base frame B29747 with a height of 600 mm is also available for these sizes. The table of compatible models shows which series is available in which size.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Vibration-free drying of dust- or air-sensitive samples and powders, for example in the UN55Incubating several sample series in parallel in research and medicine, for example in the IF75Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenValidatable cooled incubation with documented, redundant temperature monitoring, for example in the IPP55plusSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €233.06
memmert untergestell fahrbar
Memmert mobile base frame B29748, height 660 mm, for sizes 55 and 75
Manufacturer number: B29748

The mobile base frame B29748 is 660 mm high.It is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The levelling version with a height of 600 mm is also available (B29747), as is a flat base frame with a height of 130 mm (B33659). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF55 or UN55.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight660 mmScope of delivery1 mobile base frame, height 660 mmIndividual requirements & procurement serviceFor the flat and the levelling version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €444.62
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68507 for sizes 55 and 75
Manufacturer number: B68507

B68507 is a stainless steel perforated tray for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF55 or UN55. The image is for illustration only.Memmert specifies 20 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Suitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €120.40
memmert boden abtropfschale
Memmert stainless steel base drip tray B04358 for sizes 55 and 75
Manufacturer number: B04358

B04358 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It collects dripping liquid. According to Memmert, the maximum load is 1.5 kg per base drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02072). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €115.24