Nabertherm High-Temperature Furnace LHTC 08/16/C550, 8 l, Tmax 1,600 °C, Flap Door, LC084K6ON8
€13,894.00
% Manufacturer's RRP: €15,970.00 13% below manufacturer's RRP
- Tmax 1,600 °C with SiC heating rods
- 8 litres usable space, flap door
- Optionally available at no extra cost as the lift door version LHTCT 08/16
- Controller C550 with 10 programs of 20 segments each
- Three-phase connection, 12.5 kW
- Heating time approx. 25 minutes to Tmax minus 100 K
Product information "Nabertherm High-Temperature Furnace LHTC 08/16/C550, 8 l, Tmax 1,600 °C, Flap Door, LC084K6ON8"
The Nabertherm high-temperature furnace LHTC 08/16 is the large size in the SiC series with 8 litres of usable space and Tmax 1,600 °C. The flap door can also be used as a shelf, the same size is also available with a lift door as the LHTCT 08/16 at no extra cost. In both cases, control is via the C550 touch controller.
Construction and connection
The interior measures 170 x 290 x 170 mm, externally the furnace measures 490 x 625 x 540 mm, with the LHTCT model open, up to 255 mm of additional height is added. The weight is 58 kg. With a connected load of 12.5 kW, the 08/16 is connected three-phase, whereas the smaller 01/16 size with 3.5 kW is single-phase. The empty, closed furnace heats up to Tmax minus 100 K in around 25 minutes.
Heating with SiC heating rods
Silicon carbide heating rods heat the furnace, a switch cabinet with solid-state relays is matched to the rods in terms of power, and the heating rods are easy to replace. The insulation consists of high-quality fibre material without classification under Regulation (EG) Nr. 1272/2008, aluminium silicate wool (RCF fibres) is not contained in it.
Flap door or lift door
For the 08/16, there is a choice at no extra cost between a flap door (usable as a shelf, model designation LHTC) and a lift door (model designation LHTCT, hot side faces away from the operator when opening). For the smaller 01/16 size, on the other hand, only the lift door version is available. An adjustable air inlet opening and an exhaust opening in the ceiling provide air exchange in the furnace chamber.
Control with the C550 controller
Up to 10 programs with 20 segments each can be stored in the C550 touch controller for temperature ramps and holding times. The C550 with touch operation and 10 programs of 20 segments each is the standard controller for all three sizes in the LHTC/LHTCT series, including the lift door version LHTCT 08/16.
Selection guide
If 1.5 litres of usable space and a lift-door-only version are sufficient, the LHTCT 01/16 with Tmax 1,550 °C is the more compact alternative in the series. For a medium size with 3 litres and also a selectable door, there is the LHTC 03/16 size, which is currently not carried in the LT shop and is available on request.
Typical applications
The LHTC 08/16 is designed for high-temperature processes in the laboratory up to Tmax 1,600 °C, the working temperature is 1,500 °C, above that wear increases. With 8 litres, it offers the largest usable space in the series, the two smaller sizes have 1.5 and 3 litres. As factory options, a protective gas connection for purging with non-flammable process gases and a manual or automatic gas supply system can be ordered, the furnace is not gas-tight in this case.
Technical details
| Tmax | 1,600 °C |
| Internal dimensions (W x D x H) | 170 x 290 x 170 mm |
| Internal volume | 8 l |
| External dimensions (W x D x H) | 490 x 625 x 540 mm, plus up to 255 mm when the LHTCT model is open |
| Connected load | 12.5 kW, three-phase |
| Weight | 58 kg |
| Heating time | approx. 25 min (empty, closed furnace to Tmax minus 100 K) |
| Heating | SiC heating rods (silicon carbide) |
| Insulation | High-quality fibre material |
| Door | Flap door (optionally lift door at no extra cost as LHTCT 08/16) |
| Controller | C550, touch operation, 10 programs of 20 segments each |
Other models in the series
The LHTC/LHTCT series with SiC heating comprises three sizes from 1.5 to 8 litres of usable space, for the 03/16 and 08/16 the door version can be selected at no extra cost:
| Model | Volume | Tmax | Door |
|---|---|---|---|
| LHTCT 01/16 | 1.5 l | 1,550 °C | Lift door |
| LHTC 03/16 (on request) | 3 l | 1,600 °C | Flap door |
| LHTC 08/16 (this page) | 8 l | 1,600 °C | Flap door |
Scope of delivery
- 1x Nabertherm high-temperature furnace LHTC 08/16 with C550 controller
Regulatory information
The device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Nabertherm GmbH is DE 31598342. Information on the return of old appliances can be found on our Environment and disposal page.
Individual requirements and procurement service
Factory options available for the LHTC 08/16 include an adjustable temperature limiter with adjustable cut-off temperature, a protective gas connection for non-flammable process gases, and a manual or automatic gas supply system. The adjustable temperature limiter, with its adjustable cut-off temperature, serves as over-temperature protection for furnace and charge. For individual requirements, LT Laborhandel provides personal consultation.