Restek Molesieve 5A Micropacked GC Column, 80/100 Mesh, 2 m, 1.00 mm ID, 19001
€282.00
% Manufacturer's RRP: €313.00 9% below manufacturer's RRP
- Molesieve 5A packing, 80/100 mesh
- 2 m long, 1.00 mm inner diameter, 1/16 inch outer diameter
- Temperature range -60 to 330/350 °C
- Higher efficiency than conventionally packed columns, higher capacity than PLOT columns
- Standard coil, usable without special instrument configuration according to Restek
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Restek Molesieve 5A Micropacked GC Column, 80/100 Mesh, 2 m, 1.00 mm ID, 19001"
The micropacked GC column 19001 carries a Molesieve 5A packing with 80/100 mesh. The tube is 2 m long, with an inner diameter of 1.00 mm and an outer diameter of 1/16 inch. The temperature range is stated as -60 to 330/350 °C.
Micropacked instead of conventionally packed
Micropacked columns achieve higher efficiency than conventionally packed columns and have a higher capacity than PLOT columns. Restek offers a comprehensive range of packings for this, and Molesieve 5A is one of them. The column is supplied as a standard coil. According to Restek, it can be used without special instrument configuration. Custom-packed versions are available on request.
Dimensions and temperature
The packing has a particle size of 80/100 mesh. This means that the particles pass through a sieve with 80 meshes per inch and are retained on a sieve with 100 meshes per inch. It fills a tube 2 m long. The inner diameter is 1.00 mm, the outer diameter 1/16 inch (about 1.6 mm). The temperature range extends from -60 to 330/350 °C and thus starts well below zero.
Selection guide
The shop offers two micropacked columns, each 2 m long with 80/100 mesh. They differ in packing and diameter:
| Feature | Molesieve 5A 19001 | ShinCarbon ST 19043 |
|---|---|---|
| Packing | Molesieve 5A | ShinCarbon ST |
| Length | 2 m | 2 m |
| Particle size | 80/100 mesh | 80/100 mesh |
| Inner diameter | 1.00 mm | 0.53 mm |
| Outer diameter | 1/16 inch | 0.74 mm |
| Temperature | -60 to 330/350 °C | up to 300 °C |
Typical applications
The column is intended for gas chromatography with a micropacked Molesieve 5A column in standard coil format. Molecular sieve 5A is a synthetic zeolite with a pore size of about 5 Å, hence the designation 5A. Whether the packing suits a particular analyte mix depends on the analytes, carrier gas and detector of the method. These details also belong in a request for a different packing. The Molesieve 5A packing, the length of 2 m and the inner diameter of 1.00 mm define this column. Anyone who needs a different length or a different packing should request the variant.
Technical details
| Part number | 19001 |
|---|---|
| Column type | Micropacked |
| Packing (stationary phase) | Molesieve 5A |
| Particle size | 80/100 mesh |
| Length | 2 m |
| Inner diameter | 1.00 mm |
| Outer diameter | 1/16 inch |
| Temperature range | -60 to 330/350 °C |
| Pack contents | 1 piece |
Scope of delivery
1 micropacked GC column (single column, pack contents 1 piece).
Individual requirements and procurement service
Restek offers a great many further packings, dimensions and accessories for chromatography. We procure them on request, including by Restek part number. The same applies to custom-packed columns. Send us the part number or your requirement, and we will get back to you with a quote. Please state part number 19001 in the request, so that packing and dimension are clearly defined.