Accessories
Memmert test tube rack B66298, 30 holes Ø 32 mm, for WTB35 and WTB50
B66298 is a test tube rack for WTB35 and WTB50 with 30 holes. The diameter of each hole is 32 mm, and the holes are arranged in two rows. The capacity states how many racks of this type fit into the water bath: 6 racks.Racks with holes of Ø 10, 12, 14.5, 18 and 21 mm are also available for the same water baths. When choosing, what counts is the outer diameter of the vessel, which must fit Ø 32 mm.Typical applicationsTypical uses of the WTB35 and WTB50 water baths:Tempering large sample quantities or many vessels in several test tube racksRoutine laboratory work with high throughputThawing and heating processes for larger batchesSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsHoles30 holesHole diameterØ 32 mmArrangementin two rowsCapacity6 racks of this type in the water bathScope of delivery1 test tube rack with 30 holes Ø 32 mmIndividual requirements & procurement serviceThe procurement service advises on request on fit, quantities and further accessories for WTB35 and WTB50.
Memmert flask clamp B66306 for 200 ml flasks, for WTB15, WTB24, WTB35 and WTB50
B66306 is the clamp for flasks of 200 ml. The hole grid of the holding basket takes the holding clamps for Erlenmeyer flasks. The clamp fits the WTB15, WTB24, WTB35 and WTB50 water baths.Memmert states the maximum number of flasks in a drawing, which is available on request. The holding basket is available in two sizes: B66308 for WTB15 and WTB24, B66309 for WTB35 and WTB50. Clamps for 100 ml (B66305), 300 ml (B66307) and 500 ml (B66310) are also available.Typical applicationsTypical uses of the WTB15, WTB24, WTB35 and WTB50 water baths:Shaking incubation at constant temperatureParallel preparations in larger vesselsSuitable forModelUsable capacity (l)WTB1514WTB2420WTB3532WTB5045Technical detailsFlask size200 mlScope of delivery1 clamp for flasks of 200 mlIndividual requirements & procurement serviceOn request, our procurement service clarifies the drawing on the number of flasks and questions on fit.
Memmert shaking device SV3550 with holding frame for WTB35 and WTB50
The shaking device SV3550 allows the large WTB35 and WTB50 water baths to be used for shaking. It is supplied including holding frame and moves the load back and forth horizontally. The shaking frequency is 35 to 150 strokes per minute.The holding basket (large) is not part of the scope of delivery. Memmert advises ordering it as well: B66309 is also available. Further accessories also available are insert racks for test tubes (B66244, B66303 and B66304) and clamps for flasks of 100, 200, 300 and 500 ml (B66305, B66306, B66307 and B66310).Typical applicationsTypical uses of the WTB35 and WTB50 water baths:Shaking incubation at constant temperatureTempering larger sample quantities or several racks at the same timeSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsShaking frequency35 to 150 strokes per minuteMovementhorizontal back-and-forth movementScope of delivery1 shaking device with holding frameIndividual requirements & procurement serviceOur procurement service helps with putting together holding basket, insert racks and clamps for WTB35 and WTB50.
Memmert stainless steel flat lid B65806 with 3 openings Ø 87 mm for WTB6 and WTB11
The flat lid B65806 is a stainless steel lid for the WTB6 and WTB11 water baths. It has 3 openings with Ø 87 mm and concentric ring sets.For the larger sizes in the series, the flat lids B65807 with 6 openings and B65808 with 8 openings are also available.Typical applicationsTypical uses in the compatible units:Routine tasks in chemistry, microbiology and QA laboratories with a manageable sample throughputBringing samples and reagents to a constant temperature, for example when thawing or heating small quantitiesIncubation of individual vessels at a defined temperature in the water bathSuitable forModelUsable capacity (l)WTB67WTB1110Technical detailsMaterialStainless steelDesignFlat lid with concentric ring setsOpenings3 openingsOpening diameterØ 87 mmScope of delivery1 stainless steel flat lid with 3 openings Ø 87 mm and concentric ring setsIndividual requirements & procurement serviceOur procurement service accepts enquiries about lid variants, further accessories for WTB6 and WTB11 and fit with older water baths.
Memmert insert rack B66244, 405 test tubes Ø 14.5 mm, for shaking device WTB35 and WTB50
B66244 is an insert rack for a shaking device, designed for 405 test tubes Ø 14.5 mm. It belongs to the WTB35 and WTB50 water baths and can only be used together with the shaking device.The shaking device SV3550 and insert racks for 299 test tubes Ø 18 mm (B66303) and for 84 test tubes Ø 32 mm (B66304) are also available.Typical applicationsTypical uses of the WTB35 and WTB50 water baths:Shaking incubation at constant temperatureFood and water analysis with a higher sample throughputTempering large sample quantities or many vessels in several test tube racksSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsTest tubes405 piecesTest tube diameterØ 14.5 mmScope of delivery1 insert rack for 405 test tubes Ø 14.5 mmIndividual requirements & procurement serviceOn request, our procurement service clarifies which insert rack fits which test tubes.
Memmert test tube rack B66279, 30 holes Ø 12 mm, for WTB6 and WTB11
The test tube rack B66279 has 30 holes with Ø 12 mm, arranged in two rows. It is intended for the WTB6 and WTB11 water baths. According to Memmert, 3 racks of this type fit into the water bath.Vessels should have an outer diameter that fits a hole of Ø 12 mm. Racks with holes of Ø 10, 14.5, 18, 21 and 32 mm are also available for the same water baths.Typical applicationsTypical uses in the compatible units:Bringing samples and reagents to a constant temperature, for example when thawing or heating small quantitiesIncubation of individual vessels at a defined temperature in the water bathRoutine work in chemistry and microbiology laboratories with a small sample volumeSuitable forModelUsable capacity (l)WTB67WTB1110Technical detailsHoles30 holesHole diameterØ 12 mmArrangementin two rowsCapacity3 racks of this type in the water bathScope of delivery1 test tube rack with 30 holes Ø 12 mmIndividual requirements & procurement serviceIf a rack with a different number of holes or a different diameter is needed, the procurement service helps with the selection.
Memmert test tube rack B66297, 46 holes Ø 21 mm, for WTB35 and WTB50
The test tube rack B66297 has 46 holes with Ø 21 mm, arranged in two rows. It is intended for the WTB35 and WTB50 water baths. According to Memmert, 4 racks of this type fit into the water bath.Vessels should have an outer diameter that fits a hole of Ø 21 mm. Racks with holes of Ø 10, 12, 14.5, 18 and 32 mm are also available for WTB35 and WTB50.Typical applicationsTypical uses in the compatible units:Food and water analysis with a higher sample throughputTempering large sample quantities or many vessels in several test tube racksRoutine laboratory work with high throughputSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsHoles46 holesHole diameterØ 21 mmArrangementin two rowsCapacity4 racks of this type in the water bathScope of delivery1 test tube rack with 46 holes Ø 21 mmIndividual requirements & procurement serviceIf a rack with a different number of holes or a different diameter is needed, the procurement service helps with the selection.
Memmert test tube rack B66281, 22 holes Ø 18 mm, for WTB6 and WTB11
The rack B66281 holds vessels in 22 holes with Ø 18 mm, arranged in two rows. It belongs to the accessories for WTB6 and WTB11. The water bath holds 2 racks of this type.Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for WTB6 and WTB11. With Ø 18 mm, a three-row rack with 33 holes (B66282) and a four-row rack with 44 holes (B66283) are also available. Vessels should have an outer diameter that fits a hole of Ø 18 mm.Typical applicationsRoutine work in chemistry and microbiology laboratories with a small sample volumeThawing and heating several smaller vessels side by sideTempering samples and reagents at constant temperatures from +10 to +100 °CSuitable forModelUsable capacity (l)WTB67WTB1110Technical detailsHoles22 holesHole diameterØ 18 mmArrangementin two rowsCapacity2 racks of this type in the water bathScope of delivery1 test tube rack with 22 holes Ø 18 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about racks with a different hole size, further accessories for WTB6 and WTB11, and questions on fit.
Memmert test tube rack B66296, 100 holes Ø 18 mm, for WTB35 and WTB50
The rack B66296 holds vessels in 100 holes with Ø 18 mm, arranged in four rows. It belongs to the accessories for WTB35 and WTB50. The water bath holds 3 racks of this type.Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for WTB35 and WTB50. With Ø 18 mm, a two-row rack with 50 holes (B66299) and a three-row rack with 75 holes (B66295) are also available. When choosing, what counts is the outer diameter of the vessel, which must fit Ø 18 mm.Typical applicationsTempering larger sample quantities or several racks at the same timeFood and water analysis with a higher sample throughputTempering large sample quantities or many vessels in several test tube racksSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsHoles100 holesHole diameterØ 18 mmArrangementin four rowsCapacity3 racks of this type in the water bathScope of delivery1 test tube rack with 100 holes Ø 18 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about racks with a different hole size, further accessories for WTB35 and WTB50, and questions on fit.
Memmert flask clamp B66305 for 100 ml flasks, for WTB15, WTB24, WTB35 and WTB50
The clamp B66305 holds flasks of 100 ml. It is the smallest of the four clamp sizes for the WTB15, WTB24, WTB35 and WTB50 water baths and is placed in the hole grid of the holding basket, which Memmert provides for holding clamps for Erlenmeyer flasks.Which holding basket fits depends on the size: B66308 belongs to WTB15 and WTB24, B66309 to WTB35 and WTB50; both are also available. A Memmert drawing, available on request, shows how many flasks fit at most. Clamps for 200 ml (B66306), 300 ml (B66307) and 500 ml (B66310) are also available.Typical applicationsTypical uses in the compatible units:Shaking incubation at constant temperatureParallel preparations in larger vesselsSuitable forModelUsable capacity (l)WTB1514WTB2420WTB3532WTB5045Technical detailsFlask size100 mlScope of delivery1 clamp for flasks of 100 mlIndividual requirements & procurement serviceThe procurement service advises on the maximum number of flasks, the suitable holding basket and further accessories for the WTB series.
Memmert insert rack B66304, 84 test tubes Ø 32 mm, for shaking device WTB35 and WTB50
The insert rack B66304 is intended for the shaking device of the WTB35 and WTB50 water baths and holds 84 test tubes with Ø 32 mm. It can only be used with the shaking device.The insert racks for this shaking device also include versions for 405 test tubes Ø 14.5 mm (B66244) and for 299 test tubes Ø 18 mm (B66303). According to Memmert, the shaking device SV3550 is supplied including holding frame and is also available.Typical applicationsTypical uses in the compatible units:Shaking incubation at constant temperatureRoutine laboratory work with high throughputThawing and heating processes for larger batchesSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsTest tubes84 piecesTest tube diameterØ 32 mmScope of delivery1 insert rack for 84 test tubes Ø 32 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about insert racks for other test tube sizes and questions on fit in WTB35 and WTB50.
Memmert insert rack B66301, 136 test tubes Ø 14.5 mm, for shaking device WTB15 and WTB24
B66301 is an insert rack for a shaking device, designed for 136 test tubes Ø 14.5 mm. It belongs to the WTB15 and WTB24 water baths and can only be used together with the shaking device.The shaking device SV1524 and insert racks for 84 test tubes Ø 18 mm (B66243) and for 36 test tubes Ø 32 mm (B66302) are also available.Typical applicationsTypical uses of the WTB15 and WTB24 water baths:Shaking incubation at constant temperatureExtractions and reactions that need a defined temperature in the water bath over a longer periodFood and water analysis with several parallel preparationsSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsTest tubes136 piecesTest tube diameterØ 14.5 mmScope of delivery1 insert rack for 136 test tubes Ø 14.5 mmIndividual requirements & procurement serviceOn request, our procurement service clarifies which insert rack fits which test tubes.
Memmert test tube rack B65843, 74 holes Ø 10 mm, for WTB35 and WTB50
The rack B65843 holds vessels in 74 holes with Ø 10 mm, arranged in two rows. It belongs to the accessories for WTB35 and WTB50. The water bath holds 9 racks of this type.Racks with holes of Ø 12, 14.5, 18, 21 and 32 mm are also available for the same water baths. When choosing, what counts is the outer diameter of the vessel, which must fit Ø 10 mm.Typical applicationsTempering large sample quantities or many vessels in several test tube racksRoutine laboratory work with high throughputThawing and heating processes for larger batchesSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsHoles74 holesHole diameterØ 10 mmArrangementin two rowsCapacity9 racks of this type in the water bathScope of delivery1 test tube rack with 74 holes Ø 10 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about racks with a different hole size, further accessories for WTB35 and WTB50, and questions on fit.
Memmert test tube rack B66288, 34 holes Ø 18 mm, for WTB15 and WTB24
The test tube rack B66288 has 34 holes with Ø 18 mm, arranged in two rows. It is intended for the WTB15 and WTB24 water baths. According to Memmert, 3 racks of this type fit into the water bath.When choosing, what counts is the outer diameter of the vessel, which must fit Ø 18 mm. Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for WTB15 and WTB24. With Ø 18 mm, a three-row rack with 54 holes (B66289) and a four-row rack with 68 holes (B66290) are also available.Typical applicationsTypical uses in the compatible units:Food and water analysis with several parallel preparationsParallel preparations in test tube racks or larger vesselsRoutine applications in quality assurance with a medium sample throughputSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsHoles34 holesHole diameterØ 18 mmArrangementin two rowsCapacity3 racks of this type in the water bathScope of delivery1 test tube rack with 34 holes Ø 18 mmIndividual requirements & procurement serviceIf a rack with a different number of holes or a different diameter is needed, the procurement service helps with the selection.
Memmert insert rack B66243, 84 test tubes Ø 18 mm, for shaking device WTB15 and WTB24
The insert rack B66243 is intended for the shaking device of the WTB15 and WTB24 water baths and holds 84 test tubes with Ø 18 mm. It can only be used with the shaking device.The insert racks for this shaking device also include versions for 136 test tubes Ø 14.5 mm (B66301) and for 36 test tubes Ø 32 mm (B66302). According to Memmert, the shaking device SV1524 is supplied including holding frame and is also available.Typical applicationsTypical uses in the compatible units:Shaking incubation at constant temperatureTempering and incubating sample series in test tube racksExtractions and reactions that need a defined temperature in the water bath over a longer periodSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsTest tubes84 piecesTest tube diameterØ 18 mmScope of delivery1 insert rack for 84 test tubes Ø 18 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about insert racks for other test tube sizes and questions on fit in WTB15 and WTB24.
Memmert test tube rack B66289, 54 holes Ø 18 mm, for WTB15 and WTB24
B66289 is a test tube rack for WTB15 and WTB24 with 54 holes. The diameter of each hole is 18 mm, and the holes are arranged in three rows. The capacity states how many racks of this type fit into the water bath: 2 racks.With Ø 18 mm, a two-row rack with 34 holes (B66288) and a four-row rack with 68 holes (B66290) are also available. Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for WTB15 and WTB24. Vessels should have an outer diameter that fits a hole of Ø 18 mm.Typical applicationsTypical uses of the WTB15 and WTB24 water baths:Parallel preparations in test tube racks or larger vesselsRoutine applications in quality assurance with a medium sample throughputTempering and incubating sample series in test tube racksSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsHoles54 holesHole diameterØ 18 mmArrangementin three rowsCapacity2 racks of this type in the water bathScope of delivery1 test tube rack with 54 holes Ø 18 mmIndividual requirements & procurement serviceThe procurement service advises on request on fit, quantities and further accessories for WTB15 and WTB24.
Memmert test tube rack B66290, 68 holes Ø 18 mm, for WTB15 and WTB24
The rack B66290 holds vessels in 68 holes with Ø 18 mm, arranged in four rows. It belongs to the accessories for WTB15 and WTB24. The water bath holds 1 rack of this type.Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for the same water baths. With Ø 18 mm, a two-row rack with 34 holes (B66288) and a three-row rack with 54 holes (B66289) are also available. When choosing, what counts is the outer diameter of the vessel, which must fit Ø 18 mm.Typical applicationsRoutine applications in quality assurance with a medium sample throughputTempering and incubating sample series in test tube racksExtractions and reactions that need a defined temperature in the water bath over a longer periodSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsHoles68 holesHole diameterØ 18 mmArrangementin four rowsCapacity1 rack of this type in the water bathScope of delivery1 test tube rack with 68 holes Ø 18 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about racks with a different hole size, further accessories for WTB15 and WTB24, and questions on fit.
Memmert bottom grid B65816, usable on both sides for 30 and 60 mm height, for WTB35 and WTB50
The bottom grid B65816 is intended for the two largest water baths in the series, WTB35 (32 l usable capacity) and WTB50 (45 l usable capacity). It can be used on both sides and so covers 30 and 60 mm height.The bottom grids B65814 and B65815 are also available for smaller sizes.Typical applicationsThawing and heating processes for larger batchesTempering larger sample quantities or several racks at the same timeFood and water analysis with a higher sample throughputSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsUseon both sidesHeight30 mm and 60 mmScope of delivery1 bottom grid, usable on both sides for 30 and 60 mm heightIndividual requirements & procurement serviceThe procurement service is available for accessories for WTB35 and WTB50 and questions on fit.
Memmert test tube rack B66287, 46 holes Ø 14.5 mm, for WTB15 and WTB24
The rack B66287 holds vessels in 46 holes with Ø 14.5 mm, arranged in two rows. It belongs to the accessories for WTB15 and WTB24. The water bath holds 3 racks of this type.Racks with holes of Ø 10, 12, 18, 21 and 32 mm are also available for the same water baths. Vessels should have an outer diameter that fits a hole of Ø 14.5 mm.Typical applicationsExtractions and reactions that need a defined temperature in the water bath over a longer periodFood and water analysis with several parallel preparationsParallel preparations in test tube racks or larger vesselsSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsHoles46 holesHole diameterØ 14.5 mmArrangementin two rowsCapacity3 racks of this type in the water bathScope of delivery1 test tube rack with 46 holes Ø 14.5 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about racks with a different hole size, further accessories for WTB15 and WTB24, and questions on fit.
Memmert test tube rack B66286, 46 holes Ø 12 mm, for WTB15 and WTB24
B66286 is a test tube rack for WTB15 and WTB24 with 46 holes. The diameter of each hole is 12 mm, and the holes are arranged in two rows. The capacity states how many racks of this type fit into the water bath: 4 racks.Racks with holes of Ø 10, 14.5, 18, 21 and 32 mm are also available for the same water baths. When choosing, what counts is the outer diameter of the vessel, which must fit Ø 12 mm.Typical applicationsTypical uses of the WTB15 and WTB24 water baths:Tempering and incubating sample series in test tube racksExtractions and reactions that need a defined temperature in the water bath over a longer periodFood and water analysis with several parallel preparationsSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsHoles46 holesHole diameterØ 12 mmArrangementin two rowsCapacity4 racks of this type in the water bathScope of delivery1 test tube rack with 46 holes Ø 12 mmIndividual requirements & procurement serviceThe procurement service advises on request on fit, quantities and further accessories for WTB15 and WTB24.
Memmert test tube rack B66284, 18 holes Ø 21 mm, for WTB6 and WTB11
The rack B66284 holds vessels in 18 holes with Ø 21 mm, arranged in two rows. It belongs to the accessories for WTB6 and WTB11. The water bath holds 2 racks of this type.Racks with holes of Ø 10, 12, 14.5, 18 and 32 mm are also available for WTB6 and WTB11. When choosing, what counts is the outer diameter of the vessel, which must fit Ø 21 mm.Typical applicationsRoutine tasks in chemistry, microbiology and QA laboratories with a manageable sample throughputBringing samples and reagents to a constant temperature, for example when thawing or heating small quantitiesIncubation of individual vessels at a defined temperature in the water bathSuitable forModelUsable capacity (l)WTB67WTB1110Technical detailsHoles18 holesHole diameterØ 21 mmArrangementin two rowsCapacity2 racks of this type in the water bathScope of delivery1 test tube rack with 18 holes Ø 21 mmIndividual requirements & procurement serviceOur procurement service accepts enquiries about racks with a different hole size, further accessories for WTB6 and WTB11, and questions on fit.
Memmert test tube rack B66295, 75 holes Ø 18 mm, for WTB35 and WTB50
B66295 is a test tube rack for WTB35 and WTB50 with 75 holes. The diameter of each hole is 18 mm, and the holes are arranged in three rows. The capacity states how many racks of this type fit into the water bath: 4 racks.With Ø 18 mm, a two-row rack with 50 holes (B66299) and a four-row rack with 100 holes (B66296) are also available. Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for the same water baths. Vessels should have an outer diameter that fits a hole of Ø 18 mm.Typical applicationsTypical uses of the WTB35 and WTB50 water baths:Thawing and heating processes for larger batchesTempering larger sample quantities or several racks at the same timeFood and water analysis with a higher sample throughputSuitable forModelUsable capacity (l)WTB3532WTB5045Technical detailsHoles75 holesHole diameterØ 18 mmArrangementin three rowsCapacity4 racks of this type in the water bathScope of delivery1 test tube rack with 75 holes Ø 18 mmIndividual requirements & procurement serviceThe procurement service advises on request on fit, quantities and further accessories for WTB35 and WTB50.
Memmert stainless steel flat lid B65807 with 6 openings Ø 107 mm for WTB15 and WTB24
The stainless steel flat lid B65807 is available for the WTB15 and WTB24 water baths. It has 6 openings with Ø 107 mm, plus concentric ring sets.The lid belongs to the middle size in the series. The flat lid B65806 with 3 openings is also available for the smaller models, and B65808 with 8 openings for the larger ones.Typical applicationsTypical uses of the WTB15 and WTB24 water baths:Parallel preparations in test tube racks or larger vesselsRoutine applications in quality assurance with a medium sample throughputTempering and incubating sample series in test tube racksSuitable forModelUsable capacity (l)WTB1514WTB2420Technical detailsMaterialStainless steelDesignFlat lid with concentric ring setsOpenings6 openingsOpening diameterØ 107 mmScope of delivery1 stainless steel flat lid with 6 openings Ø 107 mm and concentric ring setsIndividual requirements & procurement serviceAnyone needing a different lid or further accessories for WTB15 and WTB24 can contact the procurement service for selection and queries.
Memmert test tube rack B66282, 33 holes Ø 18 mm, for WTB6 and WTB11
The test tube rack B66282 has 33 holes with Ø 18 mm, arranged in three rows. It is intended for the WTB6 and WTB11 water baths. According to Memmert, 1 rack of this type fits into the water bath.When choosing, what counts is the outer diameter of the vessel, which must fit Ø 18 mm. Racks with holes of Ø 10, 12, 14.5, 21 and 32 mm are also available for the same water baths. With Ø 18 mm, a two-row rack with 22 holes (B66281) and a four-row rack with 44 holes (B66283) are also available.Typical applicationsTypical uses in the compatible units:Thawing and heating several smaller vessels side by sideTempering samples and reagents at constant temperatures from +10 to +100 °CRoutine tasks in chemistry, microbiology and QA laboratories with a manageable sample throughputSuitable forModelUsable capacity (l)WTB67WTB1110Technical detailsHoles33 holesHole diameterØ 18 mmArrangementin three rowsCapacity1 rack of this type in the water bathScope of delivery1 test tube rack with 33 holes Ø 18 mmIndividual requirements & procurement serviceIf a rack with a different number of holes or a different diameter is needed, the procurement service helps with the selection.