Bandelin SONOREX K 10 F insert basket for DIGITEC DT and SONOSHAKE

The inner depth of the Bandelin SONOREX DIGITEC DT 510 F bath is just 65 mm. With a base area of 300 x 240 mm, it has a capacity of 4.3 l, of which 2.5 l are usable as working volume. The set comprises the bath, the K 10 F insert basket and one litre of TICKOPUR R 33. The bath belongs to the F series and is designed for sample preparation: samples in laboratory flasks and vessels are subjected to ultrasonic treatment, homogenised or degassed indirectly via the bath water.Indirect ultrasonic treatment in a shallow tankAccording to the manufacturer, direct ultrasonic treatment of objects and the cleaning of items are not permitted with the F series. The DT series baths without the ‘F’ designation are intended for the ultrasonic cleaning of objects, for example the DT 510. It has the same footprint of 300 x 240 mm, but the tank is more than twice as deep at 150 mm and has a capacity of 9.7 l.Four vibration systems, SweepTec and DEGASFour vibration systems operate at 35 kHz with a peak power of 560 watts; the nominal power is 140 watts. The SweepTec function runs fully automatically and prevents standing waves in the ultrasonic field, ensuring that samples are exposed to ultrasonic waves evenly regardless of their size and arrangement. In addition, there is a pulse function and DEGAS for rapid degassing of the sonication fluid. Twelve hours after the last button press, the unit switches itself off automatically.Buttons, timer and displayThe unit is operated via wipe-clean buttons. An LED progress indicator on the time scale shows the remaining sonication time. The timer offers settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) as well as continuous operation.Tank, drain and dimensionsThe tank (1.0 mm) and housing are made of 1.4301 stainless steel. Drainage is via a G 1/2 ball valve on the left-hand side, to which a 50 cm long hose is attached. The external dimensions of the bath are 325 x 265 x 195 mm (excluding handles and ball valve, including feet). The set has a net weight of 5.9 kg; the shipping weight is 7.5 kg with packaging dimensions of 450 x 390 x 275 mm. The handles on the sides make it easier to move the unit. The power cable is 2 m long and permanently attached to the unit; the protection rating is IP 33. The DT 1028 F from the same F series offers more space for samples, with internal dimensions of 500 x 300 x 65 mm and a working capacity of 5.8 l. It is available as part of the SONOSHAKE set with the SA 1028 shaking attachment.Insert basket, TICKOPUR and holding clampsThe set includes the K 10 F insert basket made of stainless steel (230 x 195 x 35 mm, mesh size 5 x 5 mm, load capacity up to 10 kg). The basket holds the sample vessels within the ultrasonic field, ensuring that nothing rests on the bottom of the tank. The included litre of TICKOPUR R 33 is the ultrasonic additive for the bath fluid. Bandelin also offers the polypropylene insert grid EG 1 as an accessory. The EK 10 to EK 250 stainless steel holding clamps are screwed into the basket and accommodate laboratory flasks ranging from 10 to 250 ml; the EK 10 accommodates flasks up to 31 mm in diameter, whilst the EK 250 accommodates flasks up to 85 mm. They prevent the flasks from tipping over or floating to the surface. The FT 14 foil test frame can be used to check the ultrasonication.Typical applicationsSample preparation in the laboratory and in industrial and scientific researchUniform indirect sonication of samples, including those in laboratory flasksHomogenisation of samplesRapid degassing, for example in diagnostics, environmental and food analysisSonochemistryFrequently asked questionsCan I clean tools or laboratory glassware in the DT 510 F?No, the F series is designed for the indirect sonication of samples. According to the manufacturer, direct sonication and the cleaning of items are not permitted.How much water goes into the tank?The working capacity is 2.5 l; the fill-level mark in the tank indicates the level. According to the manufacturer, plain water is unsuitable. When using TICKOPUR R 33, the volume is 2.4 l of water plus 25 ml if using deionised water (1 %) or 75 ml if using tap water (3 %).How is the bath drained?Via the G 1/2 ball valve on the left-hand side, to which a 50 cm hose is attached.What is included in the set and what else do I need?The set includes the bath, the K 10 F insert basket and 1 l of TICKOPUR R 33. According to the manufacturer, during sonication the sample vessels stand on a basket or holder; nothing must stand or lie directly on the bottom of the tank. For laboratory flasks, holding clamps are used in addition and are available separately.Technical detailsTotal capacity / Working capacity4.3 l / 2.5 l, fill level markingsInternal dimensions of tank (L x W x D)300 x 240 x 65 mmExternal dimensions (L x W x H)325 x 265 x 195 mm (excluding handles and ball valve, including feet)Set weight (net / gross)5.9 kg / 7.5 kgPackaging (L x W x H)450 x 390 x 275 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 4 vibration systemsFunctionsPulse function, SweepTec, DEGAS rapid degassing, safety shut-off 12 hours after last button pressTimer1, 2, 3, 4, 5, 10, 15, 30 minutes (± 5 %) or continuous operationOperationButtonsTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainG 1/2 ball valve with 50 cm hose, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of delivery1x Bandelin SONOREX DIGITEC DT 510 F ultrasonic bath1x K 10 F insert basket1 l TICKOPUR R 33Mains cable (2 m, permanently attached to the unit, 230 V with EU plug CEE 7/7)Ball valve, hose connector and hose for fitting to the drainHolding clamps, insert grids and film test frames are available separately.Individual requirements and procurement serviceThere is an individual procurement need for holding clamps, insert grids or film test frames. You can request a quote via our procurement service for suitable accessories, further TICKOPUR containers or another SONOREX model.

Ultrasonication and shaking of samples in a laboratory flask: The Bandelin SONOSHAKE is a ready-to-use set comprising the SONOREX DIGITEC DT 1028 F ultrasonic bath and the SA 1028 shaking attachment, which can be used either simultaneously or in succession.Ultrasonication and shaking in one setThe shaking attachment has four shaking frequencies and moves horizontally by up to 20 mm. The ultrasonic bath can be operated on a timed basis or in continuous mode. Both processes can run simultaneously or separately. According to Bandelin, this allows, for example, preliminary homogenisation to be carried out at a defined shaking frequency, followed by final homogenisation using ultrasound.Shallow tank for laboratory flasksThe bath’s tank measures 500 x 300 mm and is only 65 mm deep. It has a capacity of 9.5 l, of which 5.8 l is usable volume, and is made of 1.4301 stainless steel with a thickness of 1.0 mm. The housing is made of the same material, has an IP 33 rating and features side handles. Externally, the bath measures 535 x 325 x 205 mm, excluding the handles and ball valve but including the feet. The drain is a G ½ ball valve with a 50 cm hose on the left-hand side.Ultrasonic system of the DIGITEC DT 1028 FEight vibration systems generate a peak power of 1,280 watts at 35 kHz; the nominal power is 320 watts. The bath is operated via buttons. The time can be set to 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %); there is also a continuous operation mode. Functions include a pulse function, sweep and the DEGAS rapid degassing function. The bath switches off automatically twelve hours after the last button press. The mains cable is 2 m long and permanently attached to the unit; the operating voltage is 230 V~ (± 10 %) at 50/60 Hz, and the current consumption is 1.4 A.Shaking attachment SA 1028The attachment has internal dimensions of 410 x 280 x 70 mm and external dimensions of 465 x 340 x 105 mm. It weighs 8.4 kg. The Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU apply to the attachment.Holding clamps for laboratory flasksLaboratory flasks require clamps from the SONOREX EK 10 to EK 250 series, which are not included in the set and must be ordered separately. The clamps are required for laboratory flasks.ClassificationThe SONOSHAKE is designed for sample preparation in laboratory flasks. A bath without a shaking attachment and with a larger capacity is the SONOREX DIGITEC DT 1028 with a 28-litre capacity; the version with heating is the DT 1028 H.Typical applicationsSample preparation in analytical chemistry, for example in environmental and food analysisSample preparation in medical diagnosticsUltrasonic treatment of samples in laboratory flasks for a defined duration or in continuous operationPreliminary homogenisation by shaking, followed by final homogenisation using ultrasoundRapid degassing using DEGASFrequently Asked QuestionsAre the holding clamps included in the scope of delivery?No, the EK 10 to EK 250 clamps are required for laboratory flasks and must be ordered separately.How deep is the tank?65 mm with a base area of 500 x 300 mm.Can it only shake or only sonicate?Yes, both processes can be carried out simultaneously or separately.How is the drain designed?As a G ½ ball valve with a 50 cm hose on the left-hand side of the bath.Technical detailsSetSONOREX DIGITEC DT 1028 F ultrasonic bath and SA 1028 shaking attachmentCapacity / Working volume of bath9.5 l / 5.8 lInternal dimensions of bath (L x W x D)500 x 300 x 65 mmTank materialStainless steel 1.4301, thickness 1.0 mmExternal dimensions of the bath (L x W x H)535 x 325 x 205 mm (excluding handles and ball valve, including feet)Bath housingStainless steel 1.4301, IP 33, side handlesDrainG ½ ball valve with 50 cm hose, left-hand sideUltrasonic frequency35 kHzUltrasonic powerPeak power 1,280 W, nominal power 320 W, 8 vibration systemsBath functionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressBath operationButtonsTimer (bath)1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationOperating voltage for bath230 V AC (± 10 %), 50/60 Hz, alternatively 115 V AC, 2 m mains lead permanently attached to the unitCurrent consumption (bath)1.4 A (230 V), 2.8 A (115 V)Shaking attachment SA 1028four shaking frequencies, horizontal movement up to a maximum of 20 mmInternal dimensions of shaking attachment410 x 280 x 70 mmExternal dimensions of the shaking attachment (L x W x H)465 x 340 x 105 mmWeight of shaking attachment8.4 kgConformity of the shaking attachmentLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliverySONOREX DIGITEC DT 1028 F ultrasonic bathShaking attachment SA 1028SONOREX EK 10 to EK 250 holding clamps for laboratory flasks are not included and must be ordered separately.Individual requirements and procurement serviceThere is an individual procurement need for the holding clamps EK 10, EK 25, EK 50, EK 100 and EK 250, the lid D 1028 C, the hanging trays with lids KW 28-0 and KW 50 B-0, the LABOCOOL LC 400 laboratory cooler or the LABOCOOL ELC 2 extension kit. You can request a quote via our procurement service.