Bandelin SONOREX SUPER RK 514 ultrasonic bath, 13.5 litres, 277
€1,478.00
% Manufacturer's RRP: €1,944.00 23% below manufacturer's RRP
- Ultrasonic bath with a total capacity of 13.5 litres and a working capacity of 9.0 litres
- Ultrasonic frequency 35 kHz at 215 W effective rated power (860 W peak power)
- Robust tank and housing made from 1.4301 stainless steel, wall thickness 1.0 mm
- Time control from 1 to 15 minutes and continuous operation via rotary knob
- Convenient drainage via a G 3/4 ball valve with a 50 cm hose
- IP 32 protection rating for professional laboratory use
- Class I medical device in accordance with Regulation (EU) 2017/745
- Matching lid D 514 and basket K 14 available
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Bandelin SONOREX SUPER RK 514 ultrasonic bath, 13.5 litres, 277"
SONOREX SUPER RK 514: Ultrasonic bath for professional laboratory use
The Bandelin SONOREX SUPER RK 514 is a high-performance ultrasonic bath with a total capacity of 13.5 litres and a working capacity of 9.0 litres, designed for daily use in laboratories, medical practices, clinics and workshops. With an ultrasonic frequency of 35 kHz and an effective rated power of 215 W (peak power 860 W), the unit generates intense cavitation bubbles that reliably remove contaminants whilst being gentle on materials, even in hard-to-reach areas such as cavities, threads or fine openings in instruments and small parts. Thanks to the combination of frequency and rated power, the bath is suitable for both more delicate cleaning tasks and more stubborn soiling, without placing excessive strain on the objects being cleaned.
The tank and housing are made of 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. It is designed for high robustness and a long service life even with intensive use of aqueous cleaning or disinfectant solutions. The timer is conveniently operated via a rotary knob with a range of 1 to 15 minutes (tolerance ±5 %) and a continuous operation setting for longer cleaning cycles, allowing the treatment duration to be individually adjusted to different levels of soiling. For easy draining, the ultrasonic bath features a G 3/4 ball valve with a 50 cm long hose on the left-hand side of the unit, as well as a fill level mark for precise dosing of the cleaning solution. Handles on both sides facilitate handling and transport in everyday laboratory use, whilst the fixed 2 m long mains lead ensures flexible placement at the workstation. The operating voltage of 230 V~ (±10 %) at 50/60 Hz allows connection to standard laboratory power circuits.
Typical applications for the ultrasonic bath
The SONOREX SUPER RK 514 is suitable for a wide range of cleaning tasks in everyday laboratory work. These include the cleaning of instruments (suitability as specified by the instrument manufacturer), the degassing of solvents prior to analytical applications, and the cleaning of laboratory glassware, pipettes, electrodes and other small parts to remove residues, deposits or contaminants. Thanks to its continuously adjustable timer and robust stainless-steel tank, the ultrasonic bath can be flexibly integrated into various cleaning processes, both for one-off use as part of individual work steps and for recurring routine tasks in reprocessing units. The housing’s IP 32 protection rating and its classification as a Class I medical device in accordance with Regulation (EU) 2017/745 make the device a reliable fixture in professional environments; it also meets the requirements of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU.
Technical details
| Capacity / Working capacity | 13.5 l / 9.0 l |
| Ultrasonic frequency | 35 kHz |
| Ultrasonic peak power | 860 W |
| Nominal ultrasonic power (effective) | 215 W |
| Time control | 1–15 min (±5 %) and continuous operation, operated via a rotary knob |
| Material of ultrasonic bath | Stainless steel 1.4301, wall thickness 1.0 mm |
| Housing material | Stainless steel 1.4301 |
| External dimensions (L x W x H) | 355 x 325 x 305 mm |
| Internal dimensions (L x W x D) | 325 x 300 x 150 mm |
| Weight | 10.5 kg |
| Degree of protection (housing) | IP 32 |
| Operating voltage | 230 V~ (±10 %), 50/60 Hz |
| Mains cable | 2 m, permanently attached to the unit |
| Drain | G 3/4 ball valve with 50 cm hose |
| Conformity | Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU |
Scope of delivery
- 1x SONOREX SUPER RK 514 ultrasonic bath
- Operating instructions
Individual requirements & procurement service
Do you require suitable accessories for your ultrasonic bath, such as hanging baskets, insert grids, a device holder or suitable cleaning and disinfection concentrates, or do you have specific requirements regarding procurement, delivery times or special terms? Our procurement service provides personalised support in selecting the right accessories and with any special procurement requests relating to your laboratory equipment, guiding you through the process from assessing your requirements right through to delivery.
| Volume: | 13.5 l |
|---|
Matching accessories
The D 514 stainless steel lid is intended for 8 ultrasonic baths of the SONOREX SUPER RK, DIGITEC DT, DIGIPLUS DL and smart ST series. It protects the bath fluid from external contamination. When cleaning or disinfecting agents have been added, it prevents odour nuisance, according to Bandelin. During operation, it reduces noise emission. Condensation runs back into the tank.Suitable forModelBandelin device no.SONOREX SUPER RK 514 H207SONOREX SUPER RK 514 BH263SONOREX SUPER RK 514277SONOREX DIGITEC DT 514 H3211SONOREX DIGITEC DT 514 BH3216SONOREX DIGITEC DT 5143250SONOREX DIGIPLUS DL 514 BH7185SONOREX smart ST 514 BH7107Scope of delivery1 SONOREX D 514 stainless steel lid
The K 14 insert basket holds the items to be sonicated in 4 ultrasonic baths of the SONOREX SUPER RK and DIGITEC DT series. Nothing may lie on the tank bottom during operation, as abrasion can occur between the items and the oscillating tank. According to Bandelin, the basket keeps the items in the optimum area of the cavitation field, 1 to 2 cm above the bottom. For rinsing, it can be lifted out without the user coming into contact with the sonication liquid. The inner dimensions (L x W x D) are 275 x 245 x 50 mm.Suitable forModelBandelin device no.SONOREX SUPER RK 514 H207SONOREX SUPER RK 514277SONOREX DIGITEC DT 514 H3211SONOREX DIGITEC DT 5143250Scope of delivery1 SONOREX K 14 insert basket
The KD 0 sieve basket is made of stainless steel with sieve mesh. The inner diameter is 75 mm and the mesh size is 1 x 1 mm according to Bandelin. It is placed in insert vessels, or fine parts are cleaned with it directly in the ultrasonic bath. The dimensions are 75 x 75 x 40 mm.Scope of delivery1 SONOREX KD 0 stainless steel sieve basket
The PD 04 sieve basket is made of plastic and has a very fine mesh. It is placed in insert vessels or used to clean very fine parts directly in the ultrasonic bath. The dimensions are 60 x 60 x 45 mm. It is intended for ultrasonic baths of the SONOREX SUPER RK, DIGITEC DT, DIGIPLUS DL and smart ST series.Scope of delivery1 SONOREX PD 04 plastic sieve basket
The GH 14 instrument holder is intended for particularly large individual parts in the SONOREX ultrasonic bath, such as larger laboratory flasks. Compared with the basket, it has more cleaning volume. It is made of stainless steel, and the basket brackets are partly covered with polyolefin heat-shrink tubing. According to Bandelin, the tubing protects the tank rim from damage and dampens noise. It is suitable for 5 models of the SONOREX SUPER RK and DIGITEC DT series.Suitable forModelBandelin device no.SONOREX SUPER RK 514 H207SONOREX SUPER RK 514277SONOREX DIGITEC DT 514 H3211SONOREX DIGITEC DT 514 BH3216SONOREX DIGITEC DT 5143250Scope of delivery1 SONOREX GH 14 stainless steel instrument holder
The SD 09 insert beaker is made of glass, with a GR ring and a DD lid. Its inner dimensions are 91 x 91 x 180 mm. It is hung in a DE perforated lid or an insert strip. According to Bandelin, insert beakers are used for chemically aggressive liquids, abrasive contamination and sample liquids. The beaker is also intended for cleaning agents or solvents that are aggressive to stainless steel. The ultrasound acts indirectly; a cleaning solution serves as contact fluid.Scope of delivery1 SONOREX SD 09 glass insert beaker with GR ring and DD lid
The SD 06 glass insert beaker holds 600 ml. The GR ring and DD lid are included in the scope of delivery. The beaker hangs in a DE perforated lid or an insert strip. Bandelin cites insert beakers for chemically aggressive liquids, for abrasive contamination and for sonicating sample liquids; the ultrasound then acts indirectly. It is also intended for cleaning agents or solvents that are aggressive to stainless steel.Scope of delivery1 SONOREX SD 06 glass insert beaker with GR ring and DD lid
The EG 1 insert grid protects delicate parts in the stainless steel basket. According to Bandelin, it prevents the parts from lying on the bottom of the basket, touching each other or being damaged. The grid is made of polypropylene (PP) and is cut to size. 10 fastening buttons are included in the scope of delivery.Scope of delivery1 SONOREX EG 1 insert grid made of polypropylene (PP), to be cut to size, 10 fastening buttons
The EB 05 stainless steel beaker holds 600 ml and has a lid and a rubber ring. As an insert beaker, it is hung in a DE perforated lid or an insert strip. According to Bandelin, insert beakers are used for chemically aggressive liquids and when sonicating sample liquids; the ultrasound then acts indirectly. The inner dimensions are 88 x 88 x 110 mm. For this, the ultrasonic bath needs a cleaning solution as contact fluid.Scope of delivery1 SONOREX EB 05 stainless steel beaker with lid and rubber ring
The PD 06 plastic beaker holds 600 ml and is supplied with a lid and a rubber ring. It is hung in a DE perforated lid or an insert strip. According to Bandelin, insert beakers are used when liquids are chemically aggressive, when contamination is abrasive or when sample liquids are sonicated. The ultrasound then acts indirectly. The inner dimensions are 86 x 86 x 125 mm. A cleaning solution is used as contact fluid in the ultrasonic bath.Scope of delivery1 SONOREX PD 06 plastic beaker with lid and rubber ring
The KW 14 hanging tray is made of polypropylene and the lid of polycarbonate. The inner dimensions of the tray are 280 x 215 x 145 mm. Nothing may lie on the tank bottom of the ultrasonic bath during operation, which is why Bandelin offers suitable plastic hanging trays with lids. According to Bandelin, it is temperature-resistant up to 80 °C with water and up to 60 °C with acids. A cleaning solution serves as contact fluid. The tray is intended for 4 models of the SONOREX SUPER RK and DIGITEC DT series.Suitable forModelBandelin device no.SONOREX SUPER RK 514 H207SONOREX SUPER RK 514277SONOREX DIGITEC DT 514 H3211SONOREX DIGITEC DT 5143250Scope of delivery1 SONOREX KW 14 polypropylene hanging tray with polycarbonate lid
The DE 514 perforated lid is made of stainless steel. It holds insert beakers, because nothing may lie on the tank bottom during operation. Several beakers with different liquids are possible at the same time. According to Bandelin, insert beakers are used for chemically aggressive liquids and sample liquids; the ultrasound acts indirectly. The perforated lid is intended for 8 models of the SONOREX SUPER RK, DIGITEC DT, DIGIPLUS DL and smart ST series.Suitable forModelBandelin device no.SONOREX SUPER RK 514 H207SONOREX SUPER RK 514 BH263SONOREX SUPER RK 514277SONOREX DIGITEC DT 514 H3211SONOREX DIGITEC DT 514 BH3216SONOREX DIGITEC DT 5143250SONOREX DIGIPLUS DL 514 BH7185SONOREX smart ST 514 BH7107Scope of delivery1 SONOREX DE 514 stainless steel perforated lid