Bandelin SONOREX PD 04 plastic sieve basket for SONOREX ultrasonic baths

Larger batches and a cleaning medium that places greater demands on the standard tank: Bandelin offers the SONOREX SUPER RK 1028 CH for this combination. It combines a welded tank made of 1.4404 stainless steel (AISI 316L) with a heating element that heats the bath to up to 80 °C, with a total capacity of 45 litres and a working capacity of 30 litres. Like the other models in the SUPER-RK series, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and is designed for use in laboratories, medical practices and workshops.Heater and durable bath in a single unitThe heating power is 1,450 watts when operating at 230 volts or 1,400 watts at 115 volts, and the bath temperature can be continuously adjusted between 30 and 80 °C; a dry-run protection feature switches off the heater if the water level is too low. As with the RK 1028 C, the tank is made of welded 1.4404 steel with a thickness of 2.0 mm; compared to the standard tank made of 1.4301, it is generally more resistant to chlorides and more aggressive cleaning agents. At 35 kHz, the unit delivers a peak power of 1,200 watts at a rated power of 300 watts via eight transducer systems, distributed by the automatic SweepTec function to prevent standing waves in the ultrasonic field.Selection guide: with or without heating, which tankAnyone who regularly works with heat and simultaneously requires a more robust tank, for example, for frequent changes of concentrate, will be well served by the RK 1028 CH. If the standard 1.4301 tank is sufficient but a heating element is still required, the RK 1028 H, with a total capacity of 28 litres, is the suitable choice. If heating is not required but a more robust bath is, the RK 1028 C remains the option as an unheated variant with the same bath specifications. For smaller batches, Bandelin offers, amongst others, the RK 514 BH with a capacity of 18.7 litres and the RK 156 BH with a narrow, elongated basin for 9 litres within the SUPER-RK range.Use and maintenanceThe tank is filled to a working capacity of 30 litres; the total volume of 45 litres applies to the tank filled to the brim without a load. According to Bandelin, the RK 1028 CH is fitted with a 50 cm long hose connected to the G 1/2 ball valve on the left-hand side of the unit, which facilitates changing the medium via an external container. The hanging basket and lid are not included in the Scope of delivery; the RK 1028 CH is compatible with baskets K 28 C, K 28 CS, K 28 CA or K 28 CV, together with lids D 1028 C or D 1028 CS. The power cable is 2 metres long and permanently fitted; the unit can be operated at either 230 V or 115 V at 50/60 Hz.Typical applicationsHeated cleaning of large batches of laboratory glassware and instrumentsRemoval of grease and dried-on residues at elevated temperaturesUse with more aggressive cleaning concentrates thanks to the robust tankPreparation and degassing of solvents prior to analytical proceduresFrequently asked questionsHow does the RK 1028 CH differ from the RK 1028 H?Both have a heating element. The RK 1028 CH has a total capacity of 45 litres compared with 28 litres for the RK 1028 H, and additionally features a welded 1.4404 tank with a thickness of 2.0 mm instead of the standard 1.0 mm 1.4301 tank.How quickly does the unit heat up?Bandelin does not state a heating-up time; the heating power is 1,450 watts at 230 V or 1,400 watts at 115 V.Is a drain hose included?Yes, according to Bandelin the RK 1028 CH has a 50 cm long hose connected to the G 1/2 ball valve.Can I use the unit for medical instruments?Bandelin classifies the RK 1028 CH as a Class I medical device in accordance with Regulation (EU) 2017/745. The suitability of the instruments depends on the instrument manufacturer’s specifications.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm, excluding handles/ball valve, with feetWeight (net)23.4 kgShipping weight (gross)26.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, rated power 300 W, 8 vibration systemsHeating power1,450 W at 230 V / 1,400 W at 115 VTemperature range30 to 80 °C, dry-run protection for the heaterTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainG 1/2 ball valve with 50 cm hose, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 7.7 A / 115 V 15.0 ADegree of protectionIP 32Packaging dimensions670 x 470 x 565 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 CH ultrasonic bath with heatingPermanently attached mains cable (2 m)Instructions for useHanging basket (K 28 C, K 28 CS, K 28 CA or K 28 CV) and lid (D 1028 C or D 1028 CS) are not included in the Scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding the right hanging basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 CH.

SONOREX SUPER RK 52 H, ultrasonic bath with heating for laboratories and medical practices The Bandelin SONOREX SUPER RK 52 H is a compact ultrasonic bath with heating for everyday use in laboratories, medical practices and workshops. With an operating frequency of 35 kHz and a tank capacity of 1.8 litres (usable capacity 1.2 litres), the unit is suitable for the gentle cleaning of instruments, laboratory glassware and small parts, as well as for the degassing of solvents prior to analytical applications. The integrated heating system allows the cleaning effect to be specifically enhanced for temperature-sensitive contaminants, without the need for a separate heating unit. The ultrasonic tank and housing are made of 1.4301 stainless steel with a wall thickness of 0.8 mm, which allows high resistance to the cleaning and disinfecting agents commonly used in laboratories and instrument reprocessing. A fill-level mark in the tank facilitates correct filling with cleaning fluid during day-to-day use. SweepTec technology and practical operation The SONOREX SUPER RK 52 H features the SweepTec function: automatic frequency adjustment prevents the formation of standing waves in the tank, thereby ensuring more uniform cavitation and, consequently, a more consistent cleaning result throughout the entire tank volume. The heating is continuously adjustable from 30 to 80 °C; the timer covers a range of 1 to 15 minutes (± 5 %) and can also be set to continuous operation when longer cleaning or degassing cycles are required. Operation is via rotary knobs; the mains cable is permanently attached to the unit and is designed for operation at 230 V~ (± 10 %), 50/60 Hz. Technical details Ultrasonic frequency35 kHz Ultrasonic powerPeak power 240 W, rated power (effective) 60 W Heating power140 W Temperature range30–80 °C Timer1–15 min, ± 5 %, plus continuous operation (∞) Tank/housing materialStainless steel 1.4301, wall thickness 0.8 mm External dimensions (L x W x H)175 × 165 × 225 mm Internal dimensions (L x W x D)150 × 140 × 100 mm CapacityCapacity 1.8 l, usable capacity 1.2 l Weight3.3 kg Degree of protectionIP 32 Operating voltage230 V~ (± 10 %), 50/60 Hz ConformityClass I medical device in accordance with Regulation (EU) 2017/745, Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 52 H ultrasonic bath with heater, including permanently attached mains cable (2 m) Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or cleaning and disinfection concentrates, a different tank size or a bespoke configuration for your SONOREX SUPER RK 52 H? Through our bespoke procurement service, we will assist you in selecting and procuring suitable solutions for your specific laboratory requirements.

Ultrasonic bath with heating for demanding cleaning tasks in the laboratory Anyone who regularly cleans instruments, laboratory glassware or small parts in a laboratory or industrial setting is familiar with the limitations of manual cleaning: residues in cannulas, valves or intricate geometries are almost impossible to remove completely by hand. The Bandelin SONOREX SUPER RK 1050 CH ultrasonic bath with heating provides a solution. With a total capacity of 90.0 l and a working capacity (usable capacity) of 60.0 l, it offers sufficient volume for larger batches and bulky items, such as those encountered when cleaning instruments, degassing solvents or cleaning laboratory glassware and small parts. SweepTec technology, heating and operation At the heart of the unit is the fully automatic SweepTec function, which prevents standing waves in the ultrasonic field and thus ensures a particularly uniform cleaning effect across the entire tank surface. The ultrasonic tank operates at a frequency of 35 kHz and delivers a peak ultrasonic power of 2,400 W at a rated ultrasonic power of 600 W. The integrated 1,950 W heater allows for an adjustable temperature range of 30 to 80 °C, which is particularly advantageous when degassing solvents or during temperature-assisted cleaning processes using cleaning and disinfection concentrates (e.g. from the TICKOPUR or STAMMOPUR ranges). The user-friendly rotary knob allows the cleaning duration and bath temperature to be set directly on the unit; the timer covers a range of 1 to 15 minutes (± 5 %) as well as continuous operation. A fill-level mark inside the tank makes it easier to fill the tank correctly during day-to-day use. Robust construction, safety and suitable accessories The SONOREX SUPER RK 1050 CH is robustly designed for practical use in the laboratory: the ultrasonic tank is made of welded 1.4404 stainless steel with a wall thickness of 2.0 mm, whilst the housing is made of 1.4301 stainless steel. Handles on the sides facilitate transport, and drainage is via a G ¾ ball valve with a 50 cm hose on the left-hand side of the unit. The 2 m power cable is permanently attached to the unit, which operates at 230 V~ (± 10 %), 50/60 Hz. The ultrasonic bath is classified as a Class I medical device in accordance with Regulation 2017/745/EU and is compliant with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU; the housing meets degree of protection IP 32. Suitable accessories, such as hanging baskets, lids and cleaning and disinfection concentrates, can be ordered separately from us if required. Technical details ModelSONOREX SUPER RK 1050 CH Frequency35 kHz Ultrasonic powerPeak power 2,400 W, rated power 600 W Heating power1,950 W Temperature range30-80 °C, adjustable Timer1-15 min (±5 %) and continuous operation Capacity / Working capacity90.0 l / 60.0 l (usable capacity) Ultrasonic tank materialStainless steel 1.4404, welded, wall thickness 2.0 mm Housing materialStainless steel 1.4301 External dimensions (L x W x H)640 x 540 x 530 mm Internal dimensions (L x W x D)600 x 500 x 300 mm Weight61.0 kg DrainG ¾ ball valve with 50 cm hose, left-hand side Operating voltage230 V~ (± 10 %), 50/60 Hz Degree of protection (housing)IP 32 ConformityClass I medical device in accordance with 2017/745/EU, Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 1050 CH ultrasonic bath with heating Mains lead permanently attached to the unit (2 m) Operating instructions Individual requirements and procurement service Do you require additional accessories such as suitable hanging baskets, lids or cleaning concentrates, a different model from the SONOREX range, or advice on the right ultrasonic bath equipment for your day-to-day laboratory work? We can assist you with the procurement and configuration of suitable laboratory equipment and accessories. You can find details at our procurement service.

Ultrasonic bath with heating: SONOREX SUPER RK 514 H The Bandelin SONOREX SUPER RK 514 H is a high-performance ultrasonic cleaner with heating for professional use in laboratories, medical practices and workshops. With a capacity of 13.5 litres (working capacity 9.0 litres) and an ultrasonic frequency of 35 kHz, this ultrasonic bath ensures thorough, gentle cleaning of instruments, laboratory glassware and small parts. The integrated heater warms the cleaning bath to up to 80 °C, thereby helping to dissolve stubborn dirt, whilst the lowest setting of 30 °C allows for gentle cleaning of temperature-sensitive materials. The unit is classified as a Class I medical device; the suitability of the instruments depends on the instrument manufacturer’s specifications. Typical applications in everyday laboratory work include the cleaning of metal and glass instruments, the degassing of solvents prior to analytical procedures, and the reprocessing of laboratory glassware and small parts, which are freed from contamination even in hard-to-reach areas thanks to ultrasonic cavitation. The ultrasonic peak power of 860 W (rated power 215 W), combined with the 600 W heater, enables consistent, reproducible cleaning results even with daily use. The cleaning duration and bath temperature can be continuously adjusted using the rotary knob; the timer covers a range from 1 to 15 minutes and can also be set to continuous operation when longer cleaning cycles are required. This allows the unit to be flexibly adapted to different cleaning tasks, from short cycles for delicate small parts to longer cycles for heavily soiled laboratory glassware. Robust construction for continuous use The tank and housing of the SONOREX SUPER RK 514 H are made of 1.4301 stainless steel; the ultrasonic tank itself has a wall thickness of 1.0 mm, which gives the unit the necessary robustness for daily use in a laboratory setting. A fill-level mark inside the tank makes it easy to fill it correctly with cleaning fluid. For easy and clean emptying, the unit features a G 3/4 ball valve with a 50 cm long hose on the left-hand side, allowing the used bath to be drained directly into a collection vessel. Handles on the sides ensure safe transport, whilst the 2 m long mains cable, which is permanently attached to the unit, allows connection to a standard 230 V domestic socket. With an IP 32 protection rating, the housing is protected against foreign bodies larger than 2.5 mm and obliquely falling dripping water, which further simplifies handling in everyday laboratory use. Weighing 10.8 kg and with compact external dimensions of 355 x 325 x 305 mm, the ultrasonic bath can also be flexibly positioned at a fixed workstation in the laboratory or workshop. Technical details ModelSONOREX SUPER RK 514 H Capacity / Working volume13.5 l / 9.0 l Ultrasonic frequency35 kHz Ultrasonic powerPeak power 860 W, rated power 215 W Heating power600 W Temperature range30–80 °C Timer1–15 min (± 5 %), plus continuous operation Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) External dimensions (L x W x H)355 x 325 x 305 mm Internal dimensions of basin (L x W x D)325 x 300 x 150 mm Weight10.8 kg Degree of protection, housingIP 32 Packaging dimensions (L x W x H)475 x 445 x 380 mm Operating voltage / Conformity230 V~ (± 10 %), 50/60 Hz; Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 514 H ultrasonic bath with heating Mains cable (2 m, permanently attached to the unit) Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or cleaning and disinfection concentrates, a different model from the SONOREX range, or personalised advice on selecting the right ultrasonic bath for your application in a laboratory, practice or workshop? We support you with a personalised procurement service to help you put together the right laboratory equipment and will be happy to advise you on alternatives and complementary products from the Bandelin range. You can find full details at our procurement service. Simply get in touch with us and we’ll provide you with a suitable quote.

When several beakers, sieves or larger sets of instruments need to be cleaned at the same time, 9 or 10 litres quickly proves to be insufficient. The Bandelin SONOREX SUPER RK 514 BH has a total capacity of 18.7 litres and a working capacity of 12.5 litres, a noticeably greater capacity, whilst remaining part of the SUPER RK series operated by a rotary handle.Four oscillation systems for larger batchesAt an operating frequency of 35 kHz, 860 watts of peak power and 215 watts of rated power are distributed across four oscillation systems; the SweepTec function ensures that, even with this larger tank volume, no standing waves are generated and cavitation acts uniformly, regardless of whether there are several smaller objects or a single large beaker in the bath.600-watt heater for demanding cleaning tasksThe heater covers a range of 30 to 80 °C, with dry-run protection to prevent damage if the liquid level is too low. Cleaning duration and temperature can be adjusted independently using two rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation for longer cleaning cycles.Larger tank than the smaller SUPER RK modelsThe tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the internal dimensions of 325 x 300 x 200 mm offer significantly more space than the smaller SUPER RK models. With external dimensions of 355 x 325 x 385 mm and a net weight of 9.8 kg, the unit remains portable. A G 1/2 ball valve on the left-hand side allows the larger volume of water to be drained without tilting the unit.Selection guide: when the RK 514 BH is suitableIf the capacity of the RK 510 H (9.7 litres) is no longer sufficient because several beakers or a larger set of instruments need to be cleaned simultaneously on a regular basis, the RK 514 BH, with a capacity of 18.7 litres, is the next logical step within the SUPER RK series. If even more capacity is required, for example, for entire sieves or larger batches, models such as the RK 1028 H, with a capacity of 28 litres, are available.Product range overview: SUPER RK, DIGITEC DT and smart STEven with larger volumes, the SUPER RK series retains its simple rotary-knob operation. For digital button operation with an LED display and automatic DEGAS degassing in a similar size class, the DIGITEC DT 512 H with a 13-litre capacity is available; for touchscreen operation with programme memory, the smart ST series is available. In addition to Bandelin SONOREX, Elma Elmasonic ultrasonic baths are also available.Use and maintenanceThe working capacity of 12.5 litres is significantly less than the total capacity of 18.7 litres, allowing several beakers to be placed inside at the same time without the liquid spilling over the rim. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning fluid; with this volume, a more generous refill quantity is recommended. Before the first cycle with freshly prepared medium, a short run-in period in continuous operation helps to remove trapped air. After the final cleaning cycle of the day, the tank can be quickly emptied via the ball valve.Typical applicationsCleaning several beakers or larger laboratory glassware items simultaneouslyCleaning of sieve inserts and larger sets of instrumentsHeat-assisted batch cleaning in workshops and industryDegassing of larger volumes of aqueous solutions prior to analysisFrequently asked questionsHow much does the tank actually hold?The working capacity is 12.5 litres, and the total capacity is 18.7 litres.What temperature range is possible?30 to 80 °C, with dry-run protection for the heater.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included?No, the K 14 B or, alternatively, the K 14 AZ hanging basket, as well as the D 514 lid, are available separately.Technical detailsTotal capacity / Working capacity18.7 l / 12.5 lInternal dimensions of the tank (L x W x D)325 x 300 x 200 mmExternal dimensions (L x W x H)355 x 325 x 385 mmWeight (net)9.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating power600 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ComplianceLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 465 mmScope of delivery1x Bandelin SONOREX SUPER RK 514 BH ultrasonic bath with heaterFixed mains lead (2 m)Operating instructionsThe hanging basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 14 B hanging basket, the alternative K 14 AZ basket, the D 514 lid or a larger model such as the RK 1028 H, there is an individual procurement need. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

SONOREX SUPER RK 514: Ultrasonic bath for professional laboratory use The Bandelin SONOREX SUPER RK 514 is a high-performance ultrasonic bath with a total capacity of 13.5 litres and a working capacity of 9.0 litres, designed for daily use in laboratories, medical practices, clinics and workshops. With an ultrasonic frequency of 35 kHz and an effective rated power of 215 W (peak power 860 W), the unit generates intense cavitation bubbles that reliably remove contaminants whilst being gentle on materials, even in hard-to-reach areas such as cavities, threads or fine openings in instruments and small parts. Thanks to the combination of frequency and rated power, the bath is suitable for both more delicate cleaning tasks and more stubborn soiling, without placing excessive strain on the objects being cleaned. The tank and housing are made of 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. It is designed for high robustness and a long service life even with intensive use of aqueous cleaning or disinfectant solutions. The timer is conveniently operated via a rotary knob with a range of 1 to 15 minutes (tolerance ±5 %) and a continuous operation setting for longer cleaning cycles, allowing the treatment duration to be individually adjusted to different levels of soiling. For easy draining, the ultrasonic bath features a G 3/4 ball valve with a 50 cm long hose on the left-hand side of the unit, as well as a fill level mark for precise dosing of the cleaning solution. Handles on both sides facilitate handling and transport in everyday laboratory use, whilst the fixed 2 m long mains lead ensures flexible placement at the workstation. The operating voltage of 230 V~ (±10 %) at 50/60 Hz allows connection to standard laboratory power circuits. Typical applications for the ultrasonic bath The SONOREX SUPER RK 514 is suitable for a wide range of cleaning tasks in everyday laboratory work. These include the cleaning of instruments (suitability as specified by the instrument manufacturer), the degassing of solvents prior to analytical applications, and the cleaning of laboratory glassware, pipettes, electrodes and other small parts to remove residues, deposits or contaminants. Thanks to its continuously adjustable timer and robust stainless-steel tank, the ultrasonic bath can be flexibly integrated into various cleaning processes, both for one-off use as part of individual work steps and for recurring routine tasks in reprocessing units. The housing’s IP 32 protection rating and its classification as a Class I medical device in accordance with Regulation (EU) 2017/745 make the device a reliable fixture in professional environments; it also meets the requirements of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. Technical details Capacity / Working capacity13.5 l / 9.0 l Ultrasonic frequency35 kHz Ultrasonic peak power860 W Nominal ultrasonic power (effective)215 W Time control1–15 min (±5 %) and continuous operation, operated via a rotary knob Material of ultrasonic bathStainless steel 1.4301, wall thickness 1.0 mm Housing materialStainless steel 1.4301 External dimensions (L x W x H)355 x 325 x 305 mm Internal dimensions (L x W x D)325 x 300 x 150 mm Weight10.5 kg Degree of protection (housing)IP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit DrainG 3/4 ball valve with 50 cm hose ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x SONOREX SUPER RK 514 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories for your ultrasonic bath, such as hanging baskets, insert grids, a device holder or suitable cleaning and disinfection concentrates, or do you have specific requirements regarding procurement, delivery times or special terms? Our procurement service provides personalised support in selecting the right accessories and with any special procurement requests relating to your laboratory equipment, guiding you through the process from assessing your requirements right through to delivery.

Ultrasonic bath for reliable cleaning in everyday laboratory work The Bandelin SONOREX SUPER RK 100 is a compact ultrasonic bath with a 3-litre tank capacity for the daily cleaning of laboratory equipment, instruments and small parts. The tank has a usable capacity of 2.0 litres and is made from 1.4301 stainless steel with a wall thickness of 1.0 mm, ensuring a robust and durable construction for regular laboratory use. The housing is also made from 1.4301 stainless steel and meets degree of protection IP 32. SweepTec technology and ease of use The unit operates at a frequency of 35 kHz and generates a peak ultrasonic power of 320 W at a rated power (effective ultrasonic power) of 80 W. The fully automatic SweepTec function prevents standing waves in the ultrasonic field, thereby ensuring a particularly uniform cleaning effect throughout the entire tank volume. Operation is via a simple rotary knob for setting the time; the timer covers a range from 1 to 15 minutes (±5 %) and includes a continuous operation mode. A fill-level mark inside the tank makes it easier to fill it correctly with cleaning fluid. The power cable is 2 m long and permanently attached to the unit; it operates at 230 V~ (±10 %), 50/60 Hz. Applications for the SONOREX SUPER RK 100 Thanks to its compact dimensions, the ultrasonic bath is particularly suitable for laboratories with limited space, for example for instrument cleaning, the degassing of solvents or the gentle cleaning of laboratory glassware and small parts. For specific applications, Bandelin offers suitable inserts such as baskets and lids, as well as cleaning and disinfection concentrates, as separate accessories. Technical details ModelSONOREX SUPER RK 100 Frequency35 kHz Ultrasonic peak power320 W Rated power (effective)80 W Timer range1–15 min (±5 %), plus continuous operation Tank volume (capacity)3.0 l Useful capacity2.0 l Tank materialStainless steel 1.4301, wall thickness 1.0 mm External dimensions (L x W x H)260 x 160 x 250 mm Internal tank dimensions (L x W x D)240 x 140 x 100 mm Weight4.3 kg Degree of protectionIP 32 Operating voltage230 V~ (±10 %), 50/60 Hz ConformityCE conformity: Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 100 ultrasonic bath Operating instructions Customised Requirements & Procurement Service Do you need suitable inserts, baskets, lids or cleaning concentrates for your ultrasonic bath, or do you have specific requirements for your laboratory equipment? We support you with a personalised procurement service and will find the right solution for your needs. Find out more at our procurement service.

Thorough ultrasonic cleaning for medical practices, laboratories and workshops The Bandelin SONOREX SUPER RK 102 H is a robust, high-performance ultrasonic cleaner with a heating element for medical practices, laboratories and workshops. Intense cavitation bubbles clean thoroughly and gently, even in hard-to-reach areas of the items being cleaned. The housing, made from 1.4301 stainless steel with a hard chrome plating, is designed for long-term reliability. Uniform cleaning thanks to SweepTec The fully automatic SweepTec function prevents standing waves in the ultrasonic field, thus ensuring a particularly uniform cleaning effect throughout the tank. The rotary knob control allows for simple, intuitive adjustment of cleaning duration and bath temperature, suitable even for daily use without the need for training. Suitable accessories for optimum results For optimally tailored ultrasonic cleaning, suitable baskets, lids and cleaning and disinfection concentrates are available as accessories, tailored to different items to be cleaned and areas of application. Technical details Total volume3.0 litres Working volume2.0 litres Internal dimensions (L×W×D)240 × 140 × 100 mm External dimensions (L×W×H)260 × 160 × 250 mm MaterialStainless steel 1.4301, hard chrome-plated, wall thickness 1.0 mm Ultrasonic frequency35 kHz Ultrasonic power120 W (rated), 480 W (peak) Heating power140 W Temperature range30–80 °C, adjustable Timer1–15 minutes (±5 %) or continuous operation Voltage230 V~ (±10 %), 50/60 Hz Mains lead2 m, permanently attached to the unit Weight5.4 kg DrainG ¼ ball valve with 25 cm hose (right-hand side) Level indicatorFitted Degree of protectionIP 32 ClassificationClass I medical device (EU 2017/745) Scope of delivery 1x Bandelin SONOREX SUPER RK 102 H ultrasonic bath with heating Baskets, lids and cleaning/disinfection concentrates are not included and are available separately as accessories. Individual requirements & procurement service Do you need suitable baskets, inserts, lids or cleaning concentrates for your SONOREX ultrasonic bath? Our procurement service will be happy to support you with the suitable selection.

SONOREX SUPER RK 156: Ultrasonic bath for daily laboratory cleaning The Bandelin SONOREX SUPER RK 156 is an ultrasonic bath with a total capacity of 6.0 litres (4.0 litres working capacity), operating at an ultrasonic frequency of 35 kHz. It generates a peak power of 640 W at a rated power of 160 W, making it suitable for the gentle yet effective cleaning of laboratory glassware, instruments and small parts using cavitation. The ultrasonic treatment time can be continuously adjusted between 1 and 15 minutes (±5 %) using the rotary knob; alternatively, continuous operation is available. This model from the RK 156 series is not fitted with a heater and is therefore designed for applications where a temperature-controlled cleaning fluid is not required. Robust construction and simple operation The tank and housing of the SONOREX SUPER RK 156 are made of 1.4301 stainless steel; the tank wall thickness is 1.0 mm. A fill-level mark facilitates correct filling of the tank; draining is carried out via a G 1/4 ball valve with a 25 cm long hose on the right-hand side of the unit. The unit is powered by 230 V~ (±10 %), 50/60 Hz; the 2-metre power cable is permanently attached to the unit. With an IP 32 protection rating and a weight of 7.7 kg, the ultrasonic bath is compact and designed for use on a laboratory bench. Laboratory applications Typical applications for an ultrasonic bath of this design include the cleaning of laboratory glassware and small parts, the pre-cleaning and preparation of instruments, and the degassing of solvents prior to analytical applications. Thanks to its compact size, the SONOREX SUPER RK 156 is suitable both for regular use in routine laboratory work and as a supplementary cleaning unit alongside larger ultrasonic baths. Technical details Ultrasonic frequency35 kHz Ultrasonic powerPeak power 640 W, rated power 160 W Timer1–15 minutes (±5 %), plus continuous operation Tank materialStainless steel 1.4301, tank thickness 1.0 mm Housing materialStainless steel 1.4301 External dimensions (L x W x H)530 x 165 x 245 mm Internal dimensions (L x W x D)500 x 140 x 100 mm Capacity6.0 litres (working capacity 4.0 litres) Weight7.7 kg Degree of protection (housing)IP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently fitted to the unit DrainG 1/4 ball valve with 25 cm hose ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 156 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories such as hanging baskets, lids or cleaning concentrates, or perhaps larger capacities or different configurations for your laboratory? We can assist you with the bespoke procurement of laboratory equipment and accessories. You can find information at our procurement service. Simply get in touch with us to discuss your requirements.

Bandelin SONOREX SUPER RK 106, compact ultrasonic bath for laboratories and medical practices The SONOREX SUPER RK 106 ultrasonic bath, part of Bandelin’s tried-and-tested SONOREX SUPER RK series, is designed for daily use in laboratories, medical practices and manufacturing facilities. With an ultrasonic frequency of 35 kHz, a peak ultrasonic power of 480 W and a nominal power of 120 W, the unit generates intense cavitation that reliably removes even stubborn contaminants. The tank is made of durable 1.4301 stainless steel with a wall thickness of 1.0 mm and offers a total capacity of 5.6 litres, with a usable working volume of 4.0 litres. This makes the RK 106 model a compact yet powerful ultrasonic bath suitable for small to medium-sized batches in everyday laboratory work, without taking up much space on the workbench. The housing is also made entirely of 1.4301 stainless steel, making the unit corrosion-resistant and easy to clean. The compact external dimensions of 265 x 265 x 270 mm allow for flexible installation even in laboratories with limited worktop space, whilst the weight of just 7.4 kg enables easy transport between different workstations. Applications in everyday laboratory work Ultrasonic baths such as the SONOREX SUPER RK 106 are used in many areas of the laboratory: for the gentle cleaning of instruments such as tweezers, scissors and other metal instruments; for the degassing of solvents and aqueous solutions prior to analytical applications such as HPLC or titration; and for cleaning laboratory glassware, pipettes, cuvettes and other small items to remove residues and deposits. The fill-level markings on the tank make it easy to fill it correctly with the cleaning medium, whilst the side-mounted drain with a G ¼ ball valve and a 25 cm long hose allows the tank to be emptied easily and cleanly without having to move or tilt the unit. This straightforward handling proves particularly beneficial in day-to-day operations, especially in laboratories where batches change frequently. As the SONOREX SUPER RK 106 operates without an integrated heater, it is particularly suitable for applications where the cleaning medium is at room temperature or is temperature-controlled separately. SweepTec technology for consistent cleaning results A key feature of the SONOREX SUPER RK 106 is the fully automatic SweepTec function. It prevents the formation of standing waves in the ultrasonic field, thereby ensuring uniform sound distribution and consistent cleaning performance throughout the entire tank volume, regardless of where the items being cleaned are located in the tank. The cleaning duration can be conveniently set using a rotary knob within a range of 1 to 15 minutes (± 5 %); alternatively, continuous operation is available when longer cleaning cycles are required. The robust housing made of 1.4301 stainless steel, the IP 32 protection rating and the 2-metre-long mains cable permanently attached to the unit make the ultrasonic bath a durable and practical piece of equipment suitable for everyday professional use in the laboratory. Technical details Ultrasonic frequency35 kHz Ultrasonic powerPeak power 480 W, nominal power 120 W Timer1–15 min (± 5 %), and continuous operation Capacity / Working capacity5.6 l / 4.0 l Tank materialStainless steel 1.4301, tank thickness 1.0 mm Internal dimensions (L x W x D)240 x 240 x 130 mm External dimensions (L x W x H)265 x 265 x 270 mm Weight7.4 kg DrainG ¼ ball valve with 25 cm hose, right-hand side Operating voltage230 V~ (± 10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit Enclosure protection ratingIP 32 ComplianceCE, Class I medical devices (Regulation (EU) 2017/745), Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), RoHS Directive (2011/65/EU) Scope of delivery 1x Bandelin SONOREX SUPER RK 106 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories such as insert baskets, lids or cleaning concentrates, a different tank size or a model with a heater? We can assist you in selecting the right ultrasonic bath for your application and with the bespoke procurement of laboratory equipment. Find out more at our procurement service or contact us directly for a personalised quote.

SONOREX SUPER RK 255 ultrasonic bath, tried-and-tested cleaning technology for laboratories and medical practices The Bandelin SONOREX SUPER RK 255 is a compact ultrasonic bath with a total capacity of 5.5 litres (3.8 litres working capacity), designed for daily cleaning routines in laboratories, doctors’ surgeries, dental practices and industrial workshops. Using an ultrasonic frequency of 35 kHz, the unit generates fine cavitation bubbles that reliably dislodge contaminants even from hard-to-reach cavities, channels, threads and crevices. It is operated via a simple rotary knob, which allows the cleaning duration to be adjusted continuously, for straightforward use without complex menu navigation and without the need for a lengthy training period for laboratory staff. This allows the ultrasonic bath to be easily integrated into existing cleaning and reprocessing workflows, for example as a standalone unit alongside a cleaning and disinfection device. According to Bandelin, instruments can be cleaned as part of manual reprocessing and before or after machine reprocessing. Applications: Instruments, laboratory glassware and solvents Thanks to its peak ultrasonic power of 640 W (nominal power 160 W), the ultrasonic bath is suitable for a wide range of cleaning tasks. Typical applications include the cleaning of instruments (suitability as specified by the instrument manufacturer), the gentle cleaning of laboratory glassware, pipettes, cuvettes and other small parts, as well as the degassing of solvents and aqueous media prior to sensitive analytical processes. Even stubborn residues such as dried-on samples or grease on tools and small parts can be thoroughly removed without damaging the material thanks to the intensive cavitation effect. The level mark on the stainless-steel tank facilitates correct filling with cleaning fluid, whilst the side drain, fitted with a ball valve and hose, allows the bath to be emptied easily and cleanly without the need for decanting, a particular advantage given the frequent changes of fluid required in everyday laboratory work. Robust construction for continuous use Both the ultrasonic tank and the housing are made of 1.4301 stainless steel, which ensures high resistance to cleaning agents and disinfectants, as well as a long service life in everyday laboratory use. The drip-proof housing (IP 32 rating) and the side handles facilitate transport and installation, for example on a workbench, a laboratory table or a mobile trolley. The timer covers a range of 1 to 15 minutes (± 5 %) and can alternatively be set to continuous operation, allowing for both short cleaning cycles for delicate parts and longer applications. The permanently fitted, 2-metre-long mains cable ensures flexible positioning at the workstation without the need for additional extension leads. For optimally tailored ultrasonic cleaning, baskets, lids and cleaning and disinfection concentrates are available as separate accessories to complement the unit. Technical details Ultrasonic frequency35 kHz Ultrasonic peak power640 W Nominal ultrasonic power160 W Capacity / Working capacity5.5 l / 3.8 l (with fill-level markings) Timer1 – 15 min (± 5 %), plus continuous operation Internal dimensions (L x W x D)300 x 150 x 150 mm External dimensions (L x W x H)325 x 175 x 295 mm Weight6.4 kg Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) Housing protection ratingIP 32 DrainG ¼ ball valve with 25 cm hose Mains cable2 m, permanently attached to the unit Operating voltage230 V~ (± 10 %), 50/60 Hz ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 255 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require accessories for this ultrasonic bath, such as baskets, lids or cleaning concentrates, a larger quantity, or personalised advice on selecting the right model for your application? We are here to assist you with procurement and will be happy to answer any questions you may have about this product. Use our procurement service to easily discuss your requirements with us.

Greater depth for your cleaning processes: Bandelin SONOREX SMART ST 103 H When standard dimensions reach their limits, the Bandelin SONOREX SMART ST 103 H comes into its own. This ultrasonic bath from the SMART series combines a compact footprint with an impressive tank depth of 150 mm. With a total volume of 4.0 litres, it is a suitable choice for laboratories, medical facilities and industrial plants that need to clean elongated instruments or bulky components thoroughly. The integrated high-performance heater and Bandelin’s tried-and-tested ultrasonic technology ensure good cleaning performance, even with complex geometries. SMART technology: intuitive control meets precision The SONOREX SMART series offers clear and easy operation. The ST 103 H features a digital control system that allows the user to precisely set the cleaning time and temperature via an easy-to-clean membrane keypad. The heating can be flexibly adjusted between 20 and 80 °C, whilst the digital timer supports both short-term and continuous operation. A special feature is the ‘sweep technology’: by continuously shifting the acoustic peaks within the tank, standing waves are prevented, supporting a uniform cavitation effect and protecting sensitive surfaces. Durability thanks to stainless steel The ST 103 H stands out above all for its choice of materials. Both the housing and the oscillating tank are made from robust, rust-free stainless steel. The tank is also particularly easy to maintain and resistant to a wide range of cleaning chemicals. With an ultrasonic frequency of 35 kHz, the unit offers a suitable energy density to generate cavitation bubbles that penetrate even the smallest capillaries and boreholes. Thanks to its drip-proof housing (IP 32), the unit is equipped for everyday use in the laboratory or workshop. Safety in a professional environment Safety for both people and equipment is standard at Bandelin. The SONOREX SMART ST 103 H is fitted with automatic over-temperature protection, which safely switches the unit off when critical values are reached. The clear digital display provides information on the current process status at all times. Technical Specifications Filling volume: 4.0 litres (working volume approx. 2.7 litres) Inner tank dimensions (L x W x D): 240 x 140 x 150 mm Peak ultrasonic power: 480 watts Nominal ultrasonic power: 120 watts Heating power: 140 watts Temperature range: 20 °C to 80 °C Ultrasonic frequency: 35 kHz (sweep technology) Protection rating: IP 32 Mains connection: 230 V, 50/60 Hz Scope of delivery SONOREX SMART ST 103 H ultrasonic bath Mains lead Detailed operating instructions (Note: Suitable insert baskets and lids are available separately.) Accessories & Advice To make the most of your ultrasonic bath’s full potential, we recommend using genuine Bandelin accessories such as the K 3 C insert basket and the matching D 100 lid. For specialised cleaning tasks, TICKOPUR concentrates are also available. Do you have any questions about material compatibility, or do you require a quote for a complete set? Make use of our procurement service and benefit from our expert advice on laboratory and ultrasonic technology.

SONOREX SUPER RK 52 ultrasonic bath for everyday laboratory use The SONOREX SUPER RK 52 ultrasonic bath from Bandelin is a compact benchtop unit designed for laboratories, medical practices and workshops where instruments, glassware and small parts need to be cleaned quickly and gently. With an operating frequency of 35 kHz and a nominal power of 60 W (peak power 240 W), the unit generates a fine, uniform cavitation field that reaches even hard-to-access areas such as boreholes, cannulas or threads. The robust tank and housing are made of 1.4301 stainless steel and are therefore designed for daily use in a laboratory environment. Versatile use: instruments, laboratory glassware and solvents Typical applications for an ultrasonic bath of this size include the pre-cleaning and preparation of laboratory instruments prior to sterilisation, the cleaning of laboratory glassware, pipettes and small components, and the degassing of solvents and aqueous solutions prior to analytical applications. With a volume of 1.8 litres and a working capacity of 1.2 litres, the SONOREX SUPER RK 52 is particularly suitable for smaller batches and occasional use at workstations with limited space. The time selection range of 1 to 15 minutes (± 5 %) and the option for continuous operation allow the treatment duration to be tailored to the items being cleaned, controlled via a simple rotary knob without the need for complex menu navigation. SweepTec technology for consistent cleaning results The fully automatic SweepTec function prevents standing waves in the ultrasonic field and ensures that the ultrasonic energy is distributed evenly throughout the tank. This prevents so-called ‘hot spots’ and uneven cleaning results, an advantage that is particularly relevant for delicate items such as fine instruments or glassware. A fill-level mark makes it easier to fill the tank correctly, whilst the permanently attached 2-metre power cable ensures flexible positioning at the workplace. Technical details Ultrasonic frequency35 kHz Ultrasonic powerRated power 60 W, peak power 240 W Time selection1 – 15 min (± 5 %) and continuous operation (∞), operated via a rotary knob Volume / Working capacity1.8 l / 1.2 l Tank and housing materialStainless steel 1.4301, tank thickness 0.8 mm External dimensions (L x W x H)175 x 165 x 225 mm Internal dimensions (L x W x D)150 x 140 x 100 mm Weight3.1 kg Enclosure protection ratingIP 32 Operating voltage230 V~ (± 10 %), 50/60 Hz CE conformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 52 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or compatible cleaning and disinfection concentrates, a different model from the SONOREX range, or personalised advice on selecting the right ultrasonic bath for your application? We can assist you with the procurement of suitable laboratory equipment and accessories. You can find details at our procurement service.

Where instruments or small parts also need to be cleaned of grease and residues using heat, a cold ultrasonic bath is often not sufficient. The Bandelin SONOREX SUPER RK 100 H features its own heating system within its compact 3.0-litre capacity, making it the smallest heated model in the SUPER RK series.Heating from 30 to 80 °CThe 140-watt heater covers a temperature range of 30 to 80 °C and is fitted with dry-run protection, which switches the heater off as soon as there is insufficient liquid in the tank. Combined with an operating frequency of 35 kHz, a peak power of 320 watts and a nominal power of 80 watts, it can remove dirt that would otherwise require more time or a more aggressive cleaning agent at room temperature.One vibration system for 2.0 litres of working capacityThe total capacity of 3.0 litres (working capacity 2.0 litres) is subjected to ultrasonic treatment via a single vibration system, whilst the SweepTec function prevents standing waves in the tank. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick. The unit is operated via a rotary knob; the cleaning duration and bath temperature can be set independently of one another, whilst the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Compact and without a drain connectionAs with the smaller RK 31, the data sheet for the RK 100 H makes no mention of a ball valve; ‘drain: -’ is explicitly stated in the technical specifications. With a capacity of 3.0 litres, the tank can still be easily emptied after cleaning. With external dimensions of 260 x 160 x 250 mm and a net weight of 3.5 kg, the appliance fits easily even on smaller worktops.Decision guide: when is it worth opting for the next size up?The RK 100 H is usually sufficient for individual instruments, spectacles or small tools. If you regularly need to clean several items at once or slightly larger objects, the RK 103 H (4.0 litres), which is slightly larger and fitted with a drain, offers a practical advantage when changing the cleaning solution. For beakers or small sieves, the RK 510 H, with a capacity of 9.7 litres, is the next step up within the SUPER RK series.SUPER RK or smart ST: two ways to achieve the same volumeBandelin also offers the same 3.0-litre tank size in its digital smart ST range, which features a touchscreen, fine-tuned power control and programme memory instead of a rotary knob. Those wishing to save cleaning cycles in a reproducible manner are better off with the smart ST 102 H, whilst those who prefer simple, robust operation without electronics should stick with the RK 100 H. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and MaintenanceThe 2.0-litre capacity provides space for the items to be cleaned; if filled to the brim, the tank will overflow when the items are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid and is available separately via the procurement service. As the RK 100 H does not have an automatic degassing function, a short initial run in continuous operation helps to expel dissolved air from freshly prepared liquid before the items to be cleaned are loaded. After the last cycle of the day, the tank should be emptied and wiped down to prevent any cleaning agent residues from settling.Typical applicationsHeat-assisted cleaning of small instruments in practices and laboratoriesDegreasing small metal and plastic partsCleaning spectacles, watches and jewelleryPreliminary cleaning of laboratory glassware prior to further processingFrequently Asked QuestionsWhat temperature does the RK 100 H reach?The heater operates at temperatures ranging from 30 to 80 °C, controlled via the rotary knob.Is there a drain for emptying?No, according to the data sheet, this model does not have a ball valve; the tank is simply tipped out.What is the difference between the RK 100 H and the RK 31?Both are part of the small SUPER RK range; the RK 100 H also has a 140-watt heating element and a slightly larger capacity (3.0 litres instead of 0.9 litres).Is a basket included in the scope of delivery?No, the K 3 C insert basket, the PK 2 C plastic basket and the D 100 lid are available separately.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mmWeight (net)3.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 320 W, nominal power 80 W, 1 vibration systemHeating power140 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmCasing materialStainless steel 1.4301Drainno drain/ball valveMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.0 A / 115 V 2.0 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX SUPER RK 100 H ultrasonic bath with heatingFixed power cable (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThere is a specific procurement requirement for the K 3 C insert basket, the PK 2 C plastic basket, the D 100 lid or a model with a drain such as the RK 103 H. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

Ultrasonic bath with heating for professional laboratory cleaning The Bandelin SONOREX SUPER RK 255 H is a heated ultrasonic bath with a nominal volume of 5.5 litres (working capacity 3.8 litres), designed for daily use in laboratories, clinics, dental practices and industry. The integrated SweepTec technology fully automatically readjusts the ultrasonic field, thereby preventing standing waves in the sound field and ensuring a uniform, homogeneous cleaning effect throughout the entire tank. With a nominal ultrasonic power of 160 watts and a peak power of 640 watts, the ultrasonic bath operates reliably even with more stubborn soiling. The thermostatically controlled heater, with a heating power of 280 watts, allows bath temperatures ranging from 30 to 80 °C, making the unit suitable for both gentle and intensive, temperature-assisted cleaning tasks. Applications in everyday laboratory work The ultrasonic bath is suitable for numerous applications in everyday laboratory work: from instrument cleaning in medical practices, clinics and sterilisation departments, through to the degassing of solvents prior to analytical processes, and the cleaning of laboratory glassware, pipettes, cuvettes and other small parts. The unit is also well suited for the pre-cleaning of components prior to further processing, for example as a preliminary step before manual final cleaning. Operation is convenient via a rotary knob, which allows the cleaning time and bath temperature to be set directly on the unit without the need for complex menu navigation, an advantage when the unit is used by different members of laboratory staff. The timer covers a range of 1 to 15 minutes (±5 %) and can also be set to continuous operation (∞) when longer cleaning cycles are required. A fill-level mark inside the stainless steel tank makes it easy to fill the tank precisely with the relevant cleaning or disinfecting solution and helps ensure that the 3.8-litre capacity is not exceeded. Robust construction for continuous use The tank of the SONOREX SUPER RK 255 H is made of 1.4301 stainless steel with a wall thickness of 1.0 mm and is therefore designed for continuous use in laboratory environments. For emptying, the unit features a drain valve (G 1/4 ball valve) on the right-hand side with a 25 cm long hose, which allows the bath to be changed without tilting the tank. Two side handles facilitate transport within the laboratory, whilst the 2-metre-long mains cable, which is permanently attached to the unit, ensures sufficient freedom of movement at the workstation. With external dimensions of 325 x 175 x 295 mm and a weight of 6.6 kg, the ultrasonic bath can also be easily accommodated on standard laboratory workstations. With an IP 32 protection rating for the housing and CE marking as a Class I medical device in accordance with Regulation (EU) 2017/745, as well as compliance with the Low Voltage Directive (2014/35/EU), the EMC Directive (2014/30/EU) and the RoHS Directive (2011/65/EU), the SONOREX SUPER RK 255 H is also suitable for regulated laboratory environments. Technical details Frequency35 kHz (automatic frequency adjustment via SweepTec) Ultrasonic powerNominal 160 W, peak 640 W Heating power280 W Temperature range30–80 °C, thermostatically adjustable Timer1–15 mins (±5 %) plus continuous operation (∞) Nominal volume / working capacity5.5 litres / 3.8 litres Tank materialStainless steel 1.4301, tank thickness 1.0 mm External dimensions (L x W x H)325 x 175 x 295 mm Internal dimensions (L x W x D)300 x 150 x 150 mm Weight6.6 kg Enclosure protection ratingIP 32 DrainG 1/4 ball valve with 25 cm hose, right-hand side Mains connection230 V~ (±10 %), 50/60 Hz ConformityCE marking, Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive (2014/35/EU), EMC Directive (2014/30/EU), RoHS Directive (2011/65/EU) Scope of delivery 1x Bandelin SONOREX SUPER RK 255 H ultrasonic bath with heating Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or specialised cleaning and disinfection concentrates for your ultrasonic bath, or are you looking for a procurement solution tailored to your specific application? As a specialist laboratory supplier, we can assist you in selecting the right accessories and other laboratory equipment for your laboratory. Please contact us via our procurement service. We’ll be happy to advise you on your specific requirements and provide you with a suitable quote.

The Bandelin SONOREX DIGITEC DT 31 is an ultrasonic bath for small parts and small quantities of liquid. The stainless steel tank measures 190 x 85 x 60 mm internally and has a capacity of 0.9 l. Externally, the unit measures 205 x 100 x 180 mm and weighs 2.3 kg.Tank and installationIt can be filled up to a working capacity of 0.6 l; a fill-level mark is provided. The tank (0.8 mm) and housing are made of 1.4301 stainless steel. The unit has neither handles nor a drain; the power cable is permanently attached and is 2 m long. The protection rating is IP 33, and the permissible ambient temperature is 5 to 40 °C.Ultrasound with one vibration systemA vibration system generates a peak power of 160 watts at 35 kHz; the nominal power is 40 watts. The fully automatic SweepTec function is designed to prevent standing waves in the ultrasonic field; a pulse function is also available. The DT 31 does not have a degassing function (DEGAS). This is available on the DT 52, which has a tank capacity of 1.8 l.Button controlsThe buttons are wipeable, and the display shows the remaining cleaning time. Settings include 1, 2, 3, 4, 5, 10, 15 and 30 minutes with a tolerance of ±5 %, or continuous operation. The appliance switches itself off 12 hours after the last button press. It does not have a built-in heater. The DT 31 H model, which has the same tank, heats to a fixed temperature of 65 °C.Accessories for small tanksThe DT 31 is compatible with the K 08 insert basket (170 x 65 x 50 mm, mesh size 4 x 4 mm, load capacity up to 1 kg), the D 08 lid and the DE 08 perforated lid for two insert cups. The insert cups are available as 0.4-litre glass beakers (SD 04), 0.4-litre plastic beakers (KB 04) and 0.6-litre glass beakers (SD 05). The FT 1 film test frame with FL 4 film cut-outs is used to test the bath.Typical applicationsCleaning small items of various shapes and types in laboratories, medical practices and workshopsHomogenising and emulsifying small quantitiesSample preparation for analysisSmall-scale sonochemical applicationsCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsDoes the DT 31 have a degassing function?No. It features SweepTec and a pulse function; the DEGAS function is only available on larger models such as the DT 52.Can the bath be heated?The DT 31 does not have a heating function. The DT 31 H heats to a fixed temperature of 65 °C; there is no adjustable temperature setting on this model.How is the bath emptied?The unit has no drain.Are there other plug types available?Yes, Bandelin offers variants with UK, Swiss and US plugs under separate order numbers, such as 3200-GB. The model offered here is the 3200 with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity0.9 l / 0.6 lInternal dimensions of tank (L x W x D)190 x 85 x 60 mmExternal dimensions (L x W x H)205 x 100 x 180 mm (including feet)Weight (net / gross)2.3 kg / 2.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 160 W, nominal power 40 W, 1 vibration systemTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drainHandlesNoneMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.2 A / 115 V 0.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions320 x 235 x 205 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 31 ultrasonic bathMains cable (2 m, permanently attached to the unit)The scope of delivery does not include baskets, lids, insert cups and cleaning concentrates, and they are available separately.Individual requirements and procurement serviceFor the K 08 insert basket, the D 08 lid, insert cups or a larger model, individual procurement is required. You can request a quote for suitable accessories or another SONOREX ultrasonic bath through our procurement service, with no obligation to purchase.

With the same footprint as the DT 102 H, the Bandelin SONOREX DIGITEC DT 103 H has a deeper tank: 240 x 140 x 150 mm instead of 240 x 140 x 100 mm. This gives a capacity of 4.0 l. The heating element has a power rating of 200 W and is adjustable between 20 and 80 °C.Deeper tank, same footprintThe appliance measures 260 x 160 x 310 mm externally and weighs 4.4 kg. Like the housing, the tank is made of 1.4301 stainless steel, with a wall thickness of 1.0 mm. The working capacity is 2.7 l, and a fill level mark is incorporated. The unit does not have any handles. The drain consists of a G ¼ ball valve on the right-hand side; the ball valve, hose connector and hose are included in the scope of delivery.Ultrasound, heating and functionsTwo vibration systems deliver a peak power of 560 W at 35 kHz; the nominal power is 140 W. The heater has a power rating of 200 W and is fitted with protection against delayed boiling and dry-run protection. SweepTec prevents standing waves in the ultrasonic field; the DEGAS rapid degassing function is activated at the start of the cleaning process, and a pulse function is also available. The current consumption at 230 V is 1.5 A.Buttons, display and timerThe buttons are wipe-clean. The display shows the remaining cleaning time and the temperature as both setpoint and actual values. The duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath can run continuously. It switches off automatically after 12 hours without any buttons being pressed.When a depth of 150 mm makes all the differenceWith all other tank dimensions being the same, the SONOREX DIGITEC DT 102 H has a depth of 100 mm, a capacity of 3.0 l and a heating power of 140 W. For even larger volumes with the same operation, the DT 156 BH (9.0 l, tank 500 x 140 x 150 mm) and the unheated DT 106 (5.6 l, round tank with a diameter of 240 mm) are available.AccessoriesAvailable for the DT 103 H are the K 3 CL stainless steel insert basket (200 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 2 kg), the D 100 lid and the perforated DE 100 lid for two insert cups. The insert cups SD 06 (glass), PD 06 (plastic) and EB 05 (stainless steel) each hold 0.6 l. Also available are the GH 1 instrument holder, the PHS 12 sample holder, the KW 3 insert tank and the GV 3 handle adjuster for controlling the immersion depth.Typical applicationsCleaning of objects of various shapes, types and sizesHomogenisation and emulsificationRapid degassing of liquidsSample preparation for analysisSonochemistry: radical generation, enhanced mass transferInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow deep is the bath?150 mm, with a length of 240 mm and a width of 140 mm.How hot does the bath get?The temperature can be set between 20 and 80 °C. The heater has a power rating of 200 W.Does the unit have handles?No, it is designed without handles.How heavy is the unit?4.4 kg net, external dimensions 260 x 160 x 310 mm.Technical detailsTotal capacity / Working capacity4.0 l / 2.7 lInternal dimensions of the tank (L x W x D)240 x 140 x 150 mmExternal dimensions (L x W x H)260 x 160 x 310 mm (excluding ball valve, including feet)Weight (net)4.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 2 vibration systemsHeating power200 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesNoneOperating voltage230 V AC (± 10 %), 50/60 Hz, alternatively 115 V AC (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 1.5 A / 115 V 3.0 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 103 H ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert basket, lid, insert cups and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service will be happy to request a quote on your behalf, without obligation, about a insert basket, lid, insert cup or another SONOREX model.

The inner dimensions of the Bandelin SONOREX DIGITEC DT 52 tank are 150 x 140 x 100 mm, and its total capacity is 1.8 l. Compared to the DT 31, the bath is roughly twice as large and also features the DEGAS degassing function. The DT 52 does not have a built-in heater.Tank and installationThe working capacity is 1.2 l, and there is a fill-level mark. The tank (0.8 mm) and housing are made of 1.4301 stainless steel. The unit measures 175 x 165 x 225 mm externally, weighs 2.4 kg and has no handles or drain. The mains cable is 2 m long and permanently attached to the unit; the protection rating is IP 33.Ultrasonic with 240 watts peak powerThe single transducer operates at 35 kHz and achieves a peak power of 240 watts at a rated power of 60 watts. SweepTec works fully automatically to counteract standing waves in the ultrasonic field, and the pulse function complements this. The DEGAS degassing function is activated at the start of the cleaning process and is designed to enhance the effect of the ultrasound.Buttons, display and timerTime and functions are selected via wipe-clean buttons; the display shows the remaining cleaning time. The timer runs for 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), or alternatively in continuous operation. The unit switches off after 12 hours if no button is pressed. If you also need to control the bath temperature, choose the DT 52 H, which has an identical tank.Holders for samples and flasksBandelin offers the RG 2 test tube holder (for six test tubes up to 25 mm in diameter or eight up to 16 mm) and the RG 2.2 (for six test tubes up to 30 mm or six up to 17 mm) for this bath. The GH 1 apparatus holder accommodates glass flasks up to 105 mm in diameter and supports loads of up to 1 kg. Also available are the K 1 C insert basket (120 x 110 x 40 mm, up to 1 kg), the D 52 lid and the DE 52 perforated lid for an insert beaker.Typical applicationsCleaning small parts of various shapes and sizes in laboratories, medical practices and workshopsUltrasonic treatment of samples in test tubes using the appropriate holderRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsHow many test tubes can be sonicated at the same time?With the RG 2 holder, six tubes up to 25 mm in diameter or eight up to 16 mm; with the RG 2.2, six tubes up to 30 mm or six up to 17 mm. The holders are not included in the scope of delivery.What is the difference between the DT 52 and the DT 52 H?Both have the same tank and the same ultrasonic power. The DT 52 H also has a heating element with an adjustable range of 20 to 80 °C.Does the DT 52 have a drain?No, there is no drain.Are there different plug types available?Yes, Bandelin offers GB, CH and US versions under their own order numbers, such as 3205-GB. The 3205 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity1.8 l / 1.2 lInternal dimensions of tank (L x W x D)150 x 140 x 100 mmExternal dimensions (L x W x H)175 x 165 x 225 mm (excluding handles and ball valve, including feet)Weight (net / gross)2.4 kg / 3.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 240 W, rated power 60 W, 1 vibration systemTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drainHandlesNoneMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.3 A / 115 V 0.6 ALeakage currentless than 3.5 mAProtection ratingIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions275 x 265 x 295 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 52 ultrasonic bathMains cable (2 m, permanently attached to the unit)The scope of delivery does not include holders, baskets, lids and insert beakers, and they are available separately.Individual requirements and procurement serviceIf you require test tube holders, instrument holders, lids or a different model, please contact us for a bespoke procurement solution. You can request a quote for suitable accessories or a larger bath, such as the DT 255, through our procurement service, with no obligation.

The Bandelin SONOREX DIGITEC DT 510 H combines a 9.7-litre tank with a 400-watt heater, which can be set to temperatures between 20 and 80 °C. The inner dimensions of the bath are 300 x 240 x 150 mm; it is operated via buttons, and the display shows the setpoint and actual bath temperature.Temperature control with boiling delay protectionThe heater includes boiling delay protection and dry-run protection. The automatic safety shut-off activates 12 hours after the last button press. At 230 V, the heater’s current consumption of 2.5 A is significantly higher than that of the unheated DT 510, which is 0.7 A.Ultrasound with four vibration systemsFour vibration systems deliver a peak power of 640 watts at 35 kHz; the rated power is 160 watts. SweepTec operates fully automatically to counter standing waves in the ultrasonic field; there is also a pulse function and the DEGAS rapid degassing feature, which is activated at the start of the cleaning process. The timer runs in the following increments: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) or in continuous operation.Tank, drain and weightThe tank (1.0 mm) and housing are made of 1.4301 stainless steel. Of the 9.7-litre total capacity, 6.6 l are used as working volume; a fill level mark is provided. The G 1/2 ball valve on the left-hand side is used for draining; a hose nozzle and hose for fitting to the drain are included. The unit measures 325 x 265 x 300 mm, weighs 7.4 kg and has side handles.Larger tank with heatingIf you need more capacity and heating up to 80 °C, the DT 514 H is the model for you, with a total capacity of 13.5 l, 600 watts of heating power and 860 watts of peak ultrasonic power. The DT 510 H, with a 9.7-litre capacity, is the smaller of the two baths and has a footprint of 325 x 265 mm.AccessoriesFor the DT 510 H, Bandelin supplies the K 10 insert basket (up to 10 kg), the GH 10 instrument holder, the D 510 lid, the DE 510 perforated lid for four insert cups, the ED 9 injection nozzle holder, the ZF 10 laboratory flask holder and the KW 10-0 polypropylene hanging tray. 0.6-litre insert cups are available in glass, plastic and stainless steel. Clamps EK 10 to EK 250 hold laboratory flasks with diameters up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops at an adjustable bath temperatureRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat temperatures can be set?20 to 80 °C at 400 watts of heating power.Where is the drain?On the left, as a G 1/2 ball valve.How does the DT 510 H differ from the DT 510?Both have the same tank and the same ultrasonic power. The DT 510 H also features a heating element and boiling delay protection.What is the unit’s current consumption?2.5 A at 230 V and 4.9 A at 115 V. The 3206 model is available with a CEE 7/7 EU plug for 230 V; Bandelin offers UK, Swiss and US variants under separate order numbers.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.4 kg / 9.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating400 W, adjustable temperature range 20 to 80 °C, boiling delay protection, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, boiling delay protection, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor accessories such as the K 10 basket, the D 510 lid or another heated model, individual procurement requirements apply. You can request a quote without obligation via our procurement service.

The same tank as the RK 510, but with a heater: The Bandelin SONOREX SUPER RK 510 H also has a capacity of 9.7 litres (6.6 litres working volume) and adds a 400-watt heater to its unheated counterpart for cleaning processes that require a heated medium.400-watt heating element with dry-run protectionThe heating element operates between 30 and 80 °C and switches off automatically via the integrated dry-run protection as soon as there is insufficient liquid in the tank. Cleaning duration and temperature are set using two separate rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Same ultrasonic power as the unheated RK 510At an operating frequency of 35 kHz, the RK 510 H, like the RK 510, delivers 640 watts of peak power and 160 watts of rated power via four transducer systems, distributed evenly throughout the tank by the SweepTec function. The tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm.Slightly heavier due to the heating technologyWith a net weight of 7.5 kg, the RK 510 H is only slightly heavier than the unheated RK 510 (7.2 kg); the external dimensions of 325 x 265 x 300 mm are identical. A G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting it. Both variants share the same IP 32 protection rating and are classified as a Class I medical device in accordance with Regulation (EU) 2017/745.When the heating system is worth itGrease, oil or wax residues dissolve much more quickly in heated cleaning fluid than at room temperature; likewise, many cleaning concentrates only become fully effective above a certain temperature. Anyone who regularly deals with such contaminants will benefit from the RK 510 H. If, on the other hand, you work exclusively with pre-heated or cold cleaning media, the RK 510, which has the same design, saves on the additional heating technology.Product range: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range of tank capacities extends from 0.9 litres (RK 31) to 58 litres (RK 1050), all featuring rotary knob controls. The DIGITEC DT series is available for digital button operation with an LED display and automatic degassing, whilst the smart ST series offers touchscreen operation with programme memory. We also offer Elma Elmasonic ultrasonic baths as a second brand in our range.Use and maintenanceThe working capacity of 6.6 litres is less than the total capacity of 9.7 litres, ensuring that heated water does not spill over the rim when beakers or instruments are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning solution; it usually dissolves even more effectively at higher temperatures. Before the first cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel dissolved air. After the last cleaning cycle of the day, the tank, whilst still warm, should be drained via the ball valve and wiped dry.Typical applicationsRemoval of grease and oil residues at elevated bath temperaturesHeat-assisted cleaning of instruments and laboratory glasswareCleaning processes using temperature-activated concentratesCleaning of multiple beakers or small parts in a single batchFrequently asked questionsWhat is the difference between the RK 510 H and the RK 510?Both share the same tank; the RK 510 H also has a 400-watt heater with a temperature range of 30 to 80 °C.What is the usable working capacity?6.6 litres out of a total capacity of 9.7 litres.Where is the drain?On the left, as a ball valve with a G 1/2 connection.Is a basket included in the scope of delivery?No, the K 10 insert basket and the D 510 lid are available separately.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.5 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsHeating power400 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.5 A / 115 V 4.9 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 H ultrasonic bath with heaterFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceThe K 10 insert basket, the D 510 lid or the unheated RK 510 version are available on request. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

Thorough ultrasonic cleaning for medical practices, laboratories and workshops The Bandelin SONOREX DIGITEC DT 100 is an ultrasonic cleaner for medical practices, laboratories and workshops. Intense cavitation bubbles clean thoroughly yet gently, even in hard-to-reach areas of the items being cleaned. The wipe-clean button controls and the LED display showing the remaining cleaning time make it particularly easy to use. SweepTec, pulse and degassing functions The fully automatic SweepTec function prevents standing waves in the ultrasonic field and ensures a particularly uniform cleaning effect. The pulse function allows for variable cleaning intensity, whilst the Degas function, which can be activated at the start, degasses the cleaning fluid, thereby further enhancing the effect of the ultrasound. Suitable accessories Suitable baskets, lids and cleaning and disinfection concentrates are available as accessories, tailored to different items to be cleaned and areas of application. Technical details Total volume3.0 litres Working volume2.0 litres Internal dimensions (L×W×H)240 × 140 × 100 mm External dimensions (L×W×H)260 × 160 × 250 mm MaterialStainless steel 1.4301, wall thickness 1.0 mm Ultrasonic frequency35 kHz Ultrasonic power80 W (rated), 320 W (peak) HeatingNot available Timer1/2/3/4/5/10/15/30 minutes or continuous operation (±5 %) DisplayLED display, remaining cleaning time Voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit Weight4.2 kg Level indicatorAvailable Degree of protectionIP 33 ClassificationClass I medical device (EU 2017/745) Scope of delivery 1x Bandelin SONOREX DIGITEC DT 100 ultrasonic bath Baskets, lids and cleaning/disinfection concentrates are not included in the scope of delivery and are available separately as accessories. Individual requirements & procurement service Do you need suitable baskets, inserts, lids or cleaning concentrates for your SONOREX ultrasonic cleaner, or are you looking for a heated model? Our procurement service will be happy to help you select suitable accessories.

The Bandelin SONOREX DIGITEC DT 514 H heats up to an adjustable temperature of 20 to 80 °C with 600 watts and achieves a peak ultrasonic power of 860 watts. The tank measures 325 x 300 x 150 mm internally and has a capacity of 13.5 l.Heating, setpoint and actual valueThe temperature is set using the buttons; the display shows the setpoint and actual values for the bath temperature. Protection against delayed boiling and dry-run protection for the heater are built in. Compared to the DT 510 H (400 watts), the heating power is 50 % higher; accordingly, the current consumption is 3.6 A at 230 V, whilst for the unheated DT 514 it is 1.0 A.Ultrasonic and time controlFour vibration systems deliver a peak power of 860 watts and a rated power of 215 watts at 35 kHz. SweepTec automatically prevents standing waves in the acoustic field; this is complemented by a pulse function and DEGAS degassing. The timer covers 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %); there is also a continuous operation mode and the unit switches off 12 hours after the last button press.Tank, drain and baseThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick. The working capacity of 9.0 l can be read from the fill level mark. A G 1/2 left-hand ball valve is provided for draining; a hose connector and hose are included. The bath measures 355 x 325 x 305 mm externally, weighs 9.0 kg and has side handles. The power cable is 2 m long; the degree of protection is IP 33.Which depth is suitable?If you have items to clean that are taller, compare the tank depth: 150 mm for the DT 514 H, 200 mm for the DT 514 BH, which consequently has a capacity of 18.7 l. The heating power is also 600 watts for both models.AccessoriesSuitable accessories include the K 14 insert basket (275 x 245 x 50 mm, up to 10 kg), the GH 14 apparatus holder, the D 514 lid, the DE 514 perforated lid for four insert beakers, the KAH 14.3 cassette holder for DIN cassettes, the SM 14 silicone studded mat and the KW 14 hanging tray. Clamps EK 10 to EK 250 hold laboratory flasks with a diameter of up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops using a temperature-controlled bathRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat bath temperature can be set?20 to 80 °C with a heating power of 600 watts.Does the tank differ from that of the DT 514? No, the tank is identical (325 x 300 x 150 mm). The difference lies in the heating system and the protection against delayed boiling.Where is the drain?On the left-hand side, as a G 1/2 ball valve.Are there other plug types available?Yes. Bandelin offers GB, CH and US variants under separate order numbers, such as 3211-GB. The 3211 model is available with a CEE 7/7 EU plug.Technical detailsTotal capacity / Working capacity13.5 l / 9.0 lInternal dimensions of tank (L x W x D)325 x 300 x 150 mmExternal dimensions (L x W x H)355 x 325 x 305 mm (excluding handles and ball valve, including feet)Weight (net / gross)9.0 kg / 10.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating600 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 H ultrasonic bath with heaterMains cable (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert beakers, and they are available separately.Individual requirements and procurement serviceFor accessories such as basket K 14, cassette holders or lid D 514, and for other heated models, individual procurement is required. You can request a quote via our procurement service.

The Bandelin SONOREX DIGITEC DT 255 has internal dimensions of 300 x 150 x 150 mm and a total capacity of 5.5 l. It is operated via buttons and does not have a built-in heating element.300 mm long tankThe working capacity is 3.8 l; a fill-level mark inside the tank makes filling easier. The tank and housing are made from 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. Compared to the DT 510, which has internal dimensions of 300 x 240 x 150 mm, the footprint of the DT 255 is a good third smaller, whilst the length and depth are the same. For even longer items to be cleaned, the SUPER RK 156 BH is designed with a 500 mm tank length; however, it features a rotary knob control instead of buttons.Two vibration systems, 640 watts peak powerAt an operating frequency of 35 kHz, the two vibration systems achieve a peak ultrasonic power of 640 watts; the rated power is 160 watts. The SweepTec function operates fully automatically and is designed to prevent standing waves in the ultrasonic field. There is also a pulse function. The DEGAS degassing function can be activated at the start of the cleaning process to remove dissolved air from freshly prepared medium.Button controls, timer and shut-offThe unit is operated via wipe-clean buttons; the remaining cleaning time can be read on the display. The timer can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (tolerance ± 5 %); alternatively, the bath can run continuously. After 12 hours without a button press, the unit switches off automatically. For those wishing to heat the bath, the version with a heater is available as the DT 255 H under order number 3240.Drain, handles and installationA drain with a G 1/4 ball valve on the right-hand side is provided for emptying. The ball valve, hose connector and hose for fitting to the drain are supplied with the unit. Handles on the sides make it easier to move the unit, which weighs 4.9 kg. The 2-metre power cable is permanently attached, and the protection rating is IP 33. The permissible ambient temperature is 5 to 40 °C.Matching accessories from the Bandelin rangeFor the DT 255, Bandelin supplies the D 255 lid, the K 5 C stainless steel insert basket (260 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 5 kg) and the perforated lid DE 255 for two insert cups. Insert cups with lids and rubber rings are available in 0.6-litre sizes in glass, plastic and stainless steel. The KW 5 hanging tray made of HD-PE (254 x 96 x 130 mm) is designed for temperatures up to a maximum of 60 °C. The FT 4 foil test frame is used to test the bath.Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizes in laboratories, medical practices and workshopsHomogenisation and emulsificationRapid degassing of liquidsSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsDoes the DT 255 have a heating element?No. The heated version is called the DT 255 H and has the order number 3240.How much liquid does the bath hold?The total capacity is 5.5 l; the working capacity is 3.8 l.Are there other plug types available?Yes. Bandelin offers variants with UK, Swiss and US plugs under separate order numbers, for example 3215-GB. The 3215 model offered here is for 230 V with a CEE 7/7 EU plug.What is the DEGAS function for?It is a degassing function that is activated at the start of the cleaning process and is designed to enhance the effect of the ultrasound.Technical detailsTotal capacity / Working capacity5.5 l / 3.8 lInternal dimensions of tank (L x W x D)300 x 150 x 150 mmExternal dimensions (L x W x H)325 x 175 x 295 mm (excluding handles and ball valve, including feet)Weight (net / gross)4.9 kg / 6.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 2 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions495 x 280 x 365 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 255 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, insert cups and cleaning concentrates, and they are available separately.Individual requirements and procurement serviceFor the K 5 C insert basket, the D 255 lid, the DE 255 perforated lid with insert cups or the heated DT 255 H variant, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories or another model from the SONOREX range.

The Bandelin SONOREX DIGITEC DT 514 BH has a tank 200 mm deep. Its internal dimensions are 325 x 300 x 200 mm and it has a capacity of 18.7 l, of which 12.5 l is working capacity. It is fitted with a heating element, push-button controls and a drain.200 millimetres deep instead of 150The base area is the same as that of the DT 514 H, but the tank is 50 mm deeper. This increases the total capacity from 13.5 to 18.7 l and the working capacity from 9.0 to 12.5 l. With external dimensions of 355 x 325 x 385 mm, the unit is correspondingly taller and weighs 9.7 kg. The tank (1.0 mm) and housing are made of 1.4301 stainless steel.Heating and safety featuresThe 600-watt heating element is adjustable from 20 to 80 °C; the setpoint and actual temperature are shown on the display. For protection, the heater has built-in delayed-boiling protection and dry-run protection. The DT 514 operates without a heater but with the 150 mm deep tank.Ultrasound and timerFour vibration systems generate a peak power of 860 watts at 35 kHz (215 watts rated power). SweepTec automatically prevents standing waves in the ultrasonic field; there is also a pulse function and DEGAS rapid degassing. The time can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %) or to continuous operation. The unit switches off after twelve hours if no button is pressed.Operation and connectionThe water drains via the G 1/2 ball valve on the left-hand side; a hose connector and hose for installation are included. The mains cable is 2 m long and permanently attached. The current consumption is 3.6 A at 230 V; the protection rating is IP 33; the permissible ambient temperature ranges from 5 to 40 °C.Baskets and holdersFor this tank, Bandelin offers the K 14 B insert basket (275 x 245 x 50 mm, up to 10 kg) and the K 14 AZ basket (285 x 260 x 155 mm, mesh size 12.5 x 12.5 mm), which is designed to hold one full-view mask, two full-face masks or four half-masks. Also available are the GH 14 apparatus holder, the D 514 lid, the DE 514 perforated lid for four insert beakers and the KW 14 B hanging tray (275 x 210 x 195 mm).Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of taller items thanks to a tank depth of 200 mmRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsHow deep is the tank?200 mm, with a base area of 325 x 300 mm.What temperature range is available?20 to 80 °C with a heating power of 600 watts.How much liquid does it hold?The working capacity is 12.5 l; the total capacity is 18.7 l.What mains voltage is the 3216 model designed for?230 V with a CEE 7/7 EU plug. Bandelin supplies versions with UK, Swiss and US plugs under the order numbers 3216-GB, 3216-CH and 3216-1.Technical detailsTotal capacity / Working capacity18.7 l / 12.5 lInternal dimensions of the tank (L x W x D)325 x 300 x 200 mmExternal dimensions (L x W x H)355 x 325 x 385 mm (excluding handles and ball valve, including feet)Weight (net / gross)9.7 kg / 11.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating600 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heating element, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 465 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 BH ultrasonic bath with heaterMains cable (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert beakers, and they are available separately.Individual requirements and procurement serviceThe K 14 B or K 14 AZ baskets, the D 514 lid or the KW 14 B hanging tray require individual procurement. You can request a quote via our procurement service.

Bandelin SONOREX SUPER RK 1028 Ultrasonic Bath for Laboratories and Clinics The Bandelin SONOREX SUPER RK 1028 ultrasonic bath is a high-performance cleaning system from the SUPER-RK series, designed for professional use in laboratories, hospitals and industry. With a tank capacity of 28 litres and a usable working volume of 19 litres, this ultrasonic bath offers sufficient space for larger batches of laboratory glassware, instruments and small parts. The tank is made of 1.4301 stainless steel with a wall thickness of 1.0 mm and is therefore designed for continuous use in demanding laboratory environments where cleaning takes place several times a day. Typical applications for this ultrasonic bath include the gentle cleaning of laboratory glassware and small parts, the cleaning of instruments in medical practices and hospitals, and the degassing of solvents prior to analytical processes. Thanks to the combination of a peak power of 1,200 W and a rated power of 300 W at an operating frequency of 35 kHz, the unit achieves an intensive yet gentle cavitation effect that works reliably even on stubborn residues on pipettes, beakers and tools. The generous tank capacity of 28 litres is also well suited to the simultaneous cleaning of several instruments or vessels in a single cycle, which noticeably increases throughput in day-to-day laboratory work. SweepTec technology and intuitive operation A key feature is the fully automatic SweepTec function, which prevents standing waves in the ultrasonic field and thus ensures uniform cleaning performance throughout the entire tank volume, including in the peripheral areas of the tank, which are often cleaned less thoroughly in simpler ultrasonic baths. Operation is via a simple rotary knob for setting the cleaning duration, selectable between 1 and 15 minutes (± 5 %) or in continuous operation for longer cleaning cycles. A fill-level mark facilitates correct filling with cleaning or disinfectant solution, whilst the G 3/4 ball valve fitted on the side, complete with a 50 cm hose, allows for straightforward and back-friendly emptying of the tank. Side handles ensure safe transport and handling during everyday laboratory use, whilst the 2-metre power cable, which is permanently attached to the unit, provides additional flexibility when positioning the unit at the workstation. Classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and with an IP 32 protection rating, the SONOREX SUPER RK 1028 is also suitable for regulated environments such as medical practices or clinics, where traceability and documentation requirements are important. Technical details Frequency35 kHz Ultrasonic powerPeak power 1,200 W, rated power 300 W Timer1–15 min (± 5 %), plus continuous operation (∞) Tank materialStainless steel 1.4301, wall thickness 1.0 mm External dimensions (L x W x H)535 x 325 x 400 mm Internal dimensions (L x W x D)500 x 300 x 200 mm Weight16.7 kg VolumeCapacity 28.0 l, working capacity 19.0 l Operating voltage230 V AC (± 10 %), 50/60 Hz DrainG 3/4 ball valve with 50 cm hose, left-hand side Mains cable2 m, permanently attached to the unit ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU, housing degree of protection IP 32 Packaging dimensions660 x 455 x 460 mm Scope of delivery 1x Bandelin SONOREX SUPER RK 1028 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require additional accessories such as insert baskets, insert beakers, covers or cleaning and disinfection concentrates, a different configuration, or assistance in selecting a suitable ultrasonic bath for your specific application? As a specialist dealer in laboratory supplies, we are happy to assist you with individual procurement enquiries, special configurations and bespoke solutions for laboratory equipment and accessories. For further information, please visit our procurement service, or contact us directly to discuss your requirements.

The heating element in the Bandelin SONOREX DIGITEC DT 31 H operates at a fixed temperature of 65 °C. This model does not have an adjustable temperature range. The inner dimensions of the tank are 190 x 85 x 60 mm and it has a capacity of 0.9 l.70-watt heating element with fixed temperatureThe heating power is 70 watts, and the bath temperature is set at 65 °C. A dry-run protection feature safeguards the heating element. If you wish to select the bath temperature yourself between 20 and 80 °C, the DT 52 H is a better choice; however, its tank is larger at 1.8 l. The DT 31 is available without a heater, but with otherwise identical dimensions.Ultrasonic and timerA vibration system delivers a peak power of 160 watts at 35 kHz (rated power 40 watts). SweepTec automatically distributes the sound field, and there is also a pulse function. This model does not feature DEGAS degassing. The cleaning duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), or the bath can run continuously. The unit switches off automatically after 12 hours without any button presses.Dimensions and materialsThe unit measures 205 x 100 x 180 mm externally and weighs 2.4 kg. The tank (0.8 mm) and housing are made of 1.4301 stainless steel; the tank has a fill-level mark for a working capacity of 0.6 l. There are no handles or drain; the mains cable is 2 m long and permanently fitted. The current consumption is 0.5 A at 230 V; the protection rating is IP 33.AccessoriesCompatible accessories include the K 08 insert basket (170 x 65 x 50 mm, up to 1 kg), the lid D 08, the perforated lid DE 08 for two insert beakers, and insert beakers with a rubber ring made of glass (0.4 l SD 04, 0.6 l SD 05) or polypropylene (0.4 l KB 04). The PD 04 sieve basket with sieve mesh (mesh size 0.63 x 0.63 mm) complements the beakers.Typical applicationsCleaning small items in laboratories, medical practices and workshops at a bath temperature of 65 °CHomogenisation and emulsificationSample preparation for analysisSonochemical applicationsCleaning of instruments classified as Class I medical devices; the suitability of the instruments is determined by the instrument manufacturer’s specificationsFrequently asked questionsCan the temperature be adjusted?No. The heater is fixed at 65 °C. The DT 52 H is designed for freely selectable temperatures ranging from 20 to 80 °C.Does the DT 31 H have a drain?No, the unit does not have a drain.Is there a degassing function?No, it features SweepTec and a pulse function, but not DEGAS.What plug types are available?The model 3220 with a CEE 7/7 EU plug for 230 V is offered here. Variants with UK, Swiss and US plugs are available from Bandelin under their own order numbers, such as 3220-GB.Technical detailsTotal capacity / Working capacity0.9 l / 0.6 lInternal dimensions of the tank (L x W x D)190 x 85 x 60 mmExternal dimensions (L x W x H)205 x 100 x 180 mm (excluding handles and ball valve, including feet)Weight (net / gross)2.4 kg / 2.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 160 W, rated power 40 W, 1 vibration systemHeating70 W, fixed at 65 °C, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, dry-run protection for the heating element, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drainHandlesNoneMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.5 A / 115 V 1.0 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions320 x 235 x 205 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 31 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)The scope of delivery does not include baskets, lids, insert beakers and cleaning concentrates, and they are available separately.Individual requirements and procurement serviceFor accessories such as the K 08 basket or the D 08 lid, a model with adjustable temperature or a larger tank, individual procurement is required. You can request a quote via our procurement service.

The Bandelin SONOREX DIGITEC DT 156 BH is characterised by a tank measuring 500 mm in length and just 140 mm in width. The bath has a capacity of 9.0 l, features a 600 W heater for temperatures ranging from 20 to 80 °C, and is operated via buttons with a display.Tank dimensions: 500 x 140 x 150 mmThe working capacity is 6.0 l, and the fill-level mark indicates the fill height. The tank and housing are made of 1.4301 stainless steel, with walls 1.0 mm thick. The unit measures 530 x 165 x 300 mm externally and weighs 7.2 kg; it has no handles. The drain is located on the right-hand side as a G ¼ ball valve; a hose connector and hose are supplied, and the 2-metre power cable is permanently attached.Four vibration systems and a 600 W heaterFour vibration systems generate a peak power of 860 W at 35 kHz (rated power 215 W). The heater has a power rating of 600 W and is fitted with delayed-boiling protection and dry-run protection; the current consumption at 230 V is 3.6 A. SweepTec prevents standing waves in the ultrasonic field; the DEGAS rapid degassing function is activated at the start of the cleaning process, and a pulse function is available.Button controls instead of rotary knobsThe SONOREX SUPER RK 156 BH has the same tank but is operated via rotary knobs; it operates within a range of 30 to 80 °C and does not have a DEGAS function. On the DT 156 BH, the temperature is set between 20 and 80 °C and displayed on the screen alongside the setpoint and actual values. The duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); continuous operation is also available. The bath switches off 12 hours after the last input.Basket and accessoriesThe K 6 BL stainless steel insert basket measures 460 x 100 x 50 mm, has a mesh size of 5 x 5 mm and a load capacity of up to 10 kg. The lid D 156 and the perforated lid DE 156 are suitable for it. The immersion depth is adjusted using the handle adjuster GV 3, whilst the silicone studded mat SM 6 is supplied in a pack of two. The range also includes the PHS 12 sample holder, 0.6-litre insert beakers, EK 25 to EK 250 clamps for laboratory flasks, and the FT 6 film test frame (220 x 410 mm).Shallower or deeperWith the same length and width, the unheated SONOREX DIGITEC DT 156 is only 100 mm deep and has a capacity of 6.0 l. Those looking for a larger volume with heating should consider the DT 514 BH with a capacity of 18.7 l.Typical applicationsUltrasonic cleaning of elongated objects in medical practices, laboratories and workshopsRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysis, sonochemical applicationsInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow long is the tank?500 mm internally, with a width of 140 mm and a depth of 150 mm.How hot does the bath get?Adjustable between 20 and 80 °C; the heating power is 600 W.Which basket is compatible with the unit?The K 6 BL insert basket, 460 x 100 x 50 mm, with a load capacity of up to 10 kg.How heavy is the unit?7.2 kg net, external dimensions 530 x 165 x 300 mm.Technical detailsTotal capacity / Working capacity9.0 l / 6.0 lInternal dimensions of the tank (L x W x D)500 x 140 x 150 mmExternal dimensions (L x W x H)530 x 165 x 300 mm (excluding handles and ball valve, including feet)Weight (net)7.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating power600 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesNoneOperating voltage230 V AC (± 10 %), 50/60 Hz, alternatively 115 V AC (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 3.6 A / 115 V 7.1 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions655 x 265 x 370 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 156 BH ultrasonic bath with heaterPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include an insert basket, lid, mat and concentrates.Individual requirements and procurement serviceFor the K 6 BL insert basket, lid or any other model in the SONOREX range, our procurement service is available to handle enquiries.

The bath temperature of the Bandelin SONOREX DIGITEC DT 52 H can be set between 20 and 80 °C. A 140-watt heating element maintains the temperature of the stainless steel tank, which has internal dimensions of 150 x 140 x 100 mm and a total capacity of 1.8 l; the display shows the setpoint and actual bath temperature.Heater and safety featuresTwo safety features are built in: protection against delayed boiling and dry-run protection for the heating element. In addition, the unit switches off automatically twelve hours after the last button press. If a fixed temperature is sufficient, the DT 31 H with 65 °C is also adequate, although its tank is smaller at 0.9 l.Ultrasonic unitA vibration system generates a peak power of 240 watts at 35 kHz (rated power 60 watts). SweepTec operates fully automatically to prevent standing waves from forming in the sound field; it also features a pulse function and DEGAS rapid degassing. Degassing is activated at the start of the cleaning process. The unheated sister model, the DT 52, has the same ultrasonic specifications.OperationThe buttons can be wiped clean. The cleaning duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (tolerance ± 5 %); continuous operation is also possible. The current consumption is 0.9 A at 230 V; the mains cable is 2 m long and is permanently attached.Housing and dimensionsThe appliance weighs 2.5 kg and measures 175 x 165 x 225 mm. The tank (0.8 mm) and housing are made of 1.4301 stainless steel; there are no handles or drain. The working capacity of 1.2 l can be read from the fill level mark; the protection rating is IP 33.AccessoriesTest tube holders RG 2 and RG 2.2, the GH 1 apparatus holder for glass flasks up to 105 mm, the K 1 C insert basket, lid D 52 and the perforated lid DE 52 are designed for use with the DT 52 H bath. 0.6-litre insert beakers are available in glass, plastic and stainless steel.Typical applicationsCleaning of small parts in laboratories, medical practices and workshops at a set bath temperature between 20 and 80 °CRapid degassing of liquidsHomogenisation and emulsificationSonochemical applicationsSample preparation for analysisCleaning of instruments using a Class I medical device; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat temperatures can be set?20 to 80 °C; the heating power is 140 watts.What safety features are there?There is protection against delayed boiling, dry-run protection for the heating element and automatic switch-off after twelve hours without any button presses.Does the unit have a drain?No.Are there other plug types available?Bandelin offers UK, Swiss and US versions under their own order numbers, such as 3225-GB. The 3225 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity1.8 l / 1.2 lInternal dimensions of tank (L x W x D)150 x 140 x 100 mmExternal dimensions (L x W x H)175 x 165 x 225 mm (excluding handles and ball valve, including feet)Weight (net / gross)2.5 kg / 3.1 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 240 W, rated power 60 W, 1 vibration systemHeating140 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drainHandlesNoneMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.9 A / 115 V 1.8 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions275 x 265 x 295 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 52 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)The scope of delivery does not include holders, baskets, lids and insert beakers, and they are available separately.Individual requirements and procurement serviceFor test tube holders, apparatus holders, lids or a larger heated model, individual procurement is required. You can request a quote via our procurement service.

Ultrasonic baths with a simple rotary knob reach their limits as soon as several batches are to be run in succession at exactly the same temperature. The Bandelin SONOREX DIGITEC DT 512 H solves this problem with push-button controls and an LED display that shows the remaining time as well as the setpoint and actual bath temperature. With a total volume of 13.0 l and a working capacity of 8.7 l, this ultrasonic bath is suitable for medium-sized batches from laboratories, workshops or medical practices, such as laboratory glassware, tools or small parts from manufacturing.Digital control with LED displayThe buttons replace the rotary knob found on the SUPER-RK series, whilst an LED display simultaneously shows the remaining cleaning time as well as the setpoint and actual temperature values. The time can be set in fixed increments of 1, 2, 3, 4, 5, 10, 15 or 30 minutes; alternatively, continuous operation is available, in each case with a tolerance of ±5 %. If the appliance remains unused for 12 hours without any buttons being pressed, the automatic safety shut-off switches it off.SweepTec, DEGAS and heating up to 80 °CThe fully automatic SweepTec function distributes the ultrasound evenly throughout the tank and prevents standing waves, which would otherwise lead to uneven cleaning. DEGAS rapidly degasses freshly prepared cleaning fluid, reducing the waiting time until the ultrasound takes full effect. The heating system covers a range of 20 to 80 °C and features built-in protection against delayed boiling and dry-run protection. With a nominal power of 215 watts and a peak power of 860 watts, distributed across four vibration systems, the bath generates cavitation.Which DIGITEC model is suitable: DT 100 H or DT 512 HWithin the DIGITEC range, the models differ primarily in terms of volume. The DT 100 H has a capacity of 3.0 l and is suitable for small quantities, such as individual tools, spectacles or small laboratory parts. The DT 512 H, with a total volume of 13.0 l and a working capacity of 8.7 l, is designed for medium-sized batches, such as several laboratory bottles at once or larger series of workpieces. Anyone who regularly cleans larger quantities or bulkier parts will find that the DT 512 H eliminates the need for multiple cycles.Differences from the SUPER RK and smart STThe SUPER RK series is operated via a traditional rotary knob, without a digital display or DEGAS function. The smart ST series goes one step further than DIGITEC, featuring a touchscreen, finely adjustable power settings from 10 to 100 % in 1 % increments, and a system bus interface for a docking station. The DIGITEC DT 512 H falls technically between the two, featuring a digital time and temperature display, but without a touchscreen or the additional programme memory of the smart ST range. The difference to the rotary-knob series is also evident in the protection rating: IP 33 instead of IP 32 for the SUPER RK.Day-to-day use and maintenanceThe drain is controlled via a G 1/2 ball valve on the left-hand side, which makes it easier to change the cleaning medium between batches. The basket and lid are not included in the scope of delivery; the K 10 B insert basket and the D 510 lid are suitable for the DT 512 H. The power cable, 2 metres long, is permanently attached to the unit; operation is possible at either 230 V or 115 V at 50/60 Hz. Protection class I and the heater’s dry-run protection are designed for daily laboratory use.Typical applicationsCleaning of laboratory glassware and pipettes in medium-sized batchesProcessing of tools and small parts in the workshopPre-cleaning of components prior to further processingCleaning tasks in medical practices and laboratories with varying temperature requirementsFrequently asked questionsIs the SONOREX DIGITEC DT 512 H a medical device?Yes, it is classified as a Class I medical device in accordance with Regulation (EU) 2017/745; it is also subject to the Low Voltage, EMC and RoHS Directives.Are the basket and lid included in the scope of delivery?No. The scope of delivery comprises the ultrasonic bath with a fixed mains cable and operating instructions; the K 10 B basket and D 510 lid are available separately.How does the DT 512 H differ from the smaller DT 100 H?With a total volume of 13.0 l and a nominal power of 215 watts, the DT 512 H has significantly more capacity than the DT 100 H, which has a volume of 3.0 l and a nominal power of 80 watts, making it suitable for larger batches or multiple batches at the same time.How is the cleaning bath changed?Via the G 1/2 ball valve on the left-hand side of the unit.Does the unit also run on 115 volts?Yes, the mains connection is designed for either 230 V or 115 V at 50/60 Hz.Technical detailsTotal volume13.0 lWorking capacity8.7 lInternal dimensions of the tank (L x W x D)300 x 240 x 200 mmExternal dimensions (L x W x H)325 x 265 x 350 mm (excluding handles/ball valve, including feet)Weightnet 8.2 kg / gross 10.2 kgTank materialStainless steel 1.4301, 1.0 mmUltrasonic frequency35 kHzUltrasonic power215 W nominal power, 860 W peak power, 4 vibration systemsHeating power400 WTemperature range20 to 80 °CTimer1/2/3/4/5/10/15/30 minutes (±5 %) or continuous operation, automatic safety shut-off after 12 hoursOperationButtons, LED display showing remaining time and setpoint/actual bath temperatureFunctionsSweepTec, DEGAS rapid degassing, pulse function, protection against delayed boiling, dry-run protection heaterDrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.7 A / 115 V 5.4 AProtection ratingIP 33ClassificationClass I medical device (EU 2017/745)Scope of delivery1x Bandelin SONOREX DIGITEC DT 512 H ultrasonic bathFixed mains lead (2 m)Instructions for useThe K 10 B insert basket and D 510 lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor suitable baskets, lids or cleaning concentrates for the DIGITEC range, please contact our procurement service.

With a total capacity of 58 litres and a working capacity of 41 litres, the Bandelin SONOREX SUPER RK 1050 is the largest model in the SUPER-RK series. It operates without a heating element and features a welded tank made from high-alloy stainless steel 1.4404 (AISI 316L), a material otherwise only used in the 1028-C/CH variants, though here in a significantly larger size. Like the other units in the series, the RK 1050 is classified as a Class I medical device in accordance with Regulation (EU) 2017/745.Sixteen vibration systems for large-volume cleaningAt 35 kHz, the RK 1050 achieves a peak power of 2,400 watts and a nominal power of 600 watts, distributed across 16 vibration systems in the base of the tank, more than any other model in this series. The automatic SweepTec function modulates the acoustic field and prevents standing waves, ensuring that the cavitation effect remains uniform even across the large tank surface area of 600 x 500 mm. The tank is 2.0 mm thick, and the housing is made from the standard material 1.4301. A pulse function briefly increases the energy output for heavily soiled items.Selection guide: Batch size and tank materialWith a working capacity of 41 litres, the RK 1050 significantly outperforms both the RK 1040 (28 litres) and the 1028 model (up to 30 litres). Those who do not require this capacity but still wish to have the more durable 1.4404 tank will find the RK 1028 C, with a total capacity of 45 litres, to be the smaller alternative made from the same tank material. For those who require a heater in addition to a smaller volume, this combination is available in the RK 1028 CH. A heater is not available for the RK 1050; this model is only available as an unheated version.The 1050 in the SUPER-RK familyBandelin’s SUPER-RK series covers volumes ranging from less than one litre for the RK 31 up to 58 litres for the RK 1050, with or without a heater, and with either a standard or a 1.4404 tank. For applications requiring a digital display or touchscreen operation, Bandelin offers the DIGITEC DT and smart ST series, although these are currently only available in smaller sizes. In addition to Bandelin, ultrasonic baths from Elma are also available; their Elmasonic P series utilises switchable dual-frequency technology, offering an alternative for laboratories that do not wish to clean continuously at 35 kHz.Typical applicationsLarge-volume cleaning of laboratory glassware, tools and components in a single operationIndustrial parts cleaning with high throughputUse with more aggressive cleaning concentrates thanks to the durable 1.4404 tankDegassing of larger quantities of cleaning media prior to analytical or industrial processesOperation and maintenanceThe tank is filled to a working capacity of 41 litres; the total volume of 58 litres refers to the tank filled to the brim without any load. The ball valve on the drain is used for emptying; according to Bandelin, this is a G 1/2-inch connection on the left-hand side of the unit. The K 50 insert basket and the matching D 1050 C lid are available as accessories but are not included in the scope of delivery. Due to its net weight of 30.0 kg and gross weight of 56.3 kg, the RK 1050 is dispatched in a carton on a Euro pallet; the power cable is 2 metres long and permanently fitted.Frequently Asked QuestionsHow many vibration systems does the RK 1050 have?16 vibration systems are fitted into the base of the tank, more than any other model in this series.Is there a heated version?No, the RK 1050 is available exclusively as an unheated model.How is the unit delivered?Due to its gross weight of 56.3 kg, the RK 1050 is shipped in a carton on a Euro pallet.Is the unit suitable for more aggressive cleaning agents?The welded tank made from 1.4404 is generally more resistant to chlorides than the standard material 1.4301; however, Bandelin does not specify approval for any specific chemicals.Technical detailsTotal capacity / Working capacity58.0 l / 41.0 lInternal dimensions of tank (L x W x D)600 x 500 x 200 mmExternal dimensions (L x W x H)640 x 540 x 425 mm, excluding handles/ball valve, with feetWeight (net)30.0 kgShipping weight (gross)56.3 kg, carton on Euro palletUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 W, 16 vibration systemsHeatingNot applicable, unheated modelTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.7 A / 115 V 5.3 ADegree of protectionIP 32PackagingCarton on a Euro pallet, 1200 x 800 x 740 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1050 ultrasonic bathPermanently attached mains cable (2 m)Instructions for useThe K 50 insert basket and D 1050 C lid are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1050.

Small components, tweezers or small laboratory parts often do not require a large tank volume, but rather a reliable temperature and simple digital control. The Bandelin SONOREX DIGITEC DT 100 H offers exactly that in a compact design: a total volume of 3.0 l, a working capacity of 2.0 l, and push-button operation with an LED display showing the remaining time and bath temperature. For a laboratory workstation or a workbench in a workshop, external dimensions of 260 x 160 x 250 millimetres (L x W x H, excluding handles) are sufficient.Compact volume for small batchesWith a total volume of 3.0 l and a working capacity of 2.0 l, the DT 100 H is designed for smaller cleaning volumes; a vibration system delivers 80 watts of nominal power and 320 watts of peak power. This is sufficient for individual tools, small metal or plastic parts, and laboratory accessories that do not accumulate in large batches. The internal dimensions of the tank are 240 x 140 x 100 millimetres.Buttons instead of a rotary knob, a display instead of a scaleButtons are used for operation instead of a rotary knob, whilst an LED display shows the remaining time as well as the setpoint and actual bath temperature simultaneously. The time can be selected in fixed increments from 1 to 30 minutes or set to continuous operation, in each case with a tolerance of ±5 %. The appliance switches off automatically after 12 hours without any buttons being pressed.Heating up to 80 °CThe 140-watt heating power covers a temperature range of 20 to 80 °C; a dry-run protection feature prevents damage should the tank accidentally run without liquid. Additionally, the unit features SweepTec for even sound distribution, DEGAS for rapid degassing, and a pulse function for varying cleaning intensity.DT 100 H or DT 512 H: which model is suitableFor small quantities such as tweezers, spectacles, jewellery or individual laboratory items, the DT 100 H with a 3.0-litre capacity is a suitable choice. If you regularly process larger batches, such as several laboratory bottles or bulkier items, the DT 512 H, with a total volume of 13.0 l and significantly higher performance, is the more suitable addition.Difference from the SUPER RK 100 H and smart ST 102 HThe SUPER RK 100 H has the same tank size but is operated via a traditional rotary knob, without a digital display or the DEGAS function. The smart ST 102 H offers more advanced technical features: a touchscreen, power adjustment from 10 to 100 % in 1 % increments, a freely selectable timer up to 8 hours and 12 programme memory slots. The DIGITEC DT 100 H falls somewhere in between and offers digital time and temperature control with a reasonable level of operational complexity.Operation without a drain tapThe DT 100 H has no drain or ball valve. To change the cleaning fluid, the tank is emptied directly or drained using a suction device. The K 3 C insert basket or the PK 2 C plastic basket, as well as the D 100 lid, both available separately, are compatible with the unit. The power cable is permanently fitted and measures 2 metres; the unit can be connected to either 230 V or 115 V at 50/60 Hz.Typical applicationsCleaning of small tools, tweezers and laboratory accessoriesProcessing of small metal or plastic parts in the workshopPre-cleaning of individual components prior to assembly or further processingCleaning tasks in confined spaces in the laboratory or at the workbenchFrequently asked questionsDoes the DT 100 H have a drain tap?No, the DT 100 H has no drain; the tank is emptied directly.Is the unit a medical device?Yes, Class I in accordance with Regulation (EU) 2017/745.Which accessories are compatible with the DT 100 H?The K 3 C insert basket or the PK 2 C plastic basket, as well as the D 100 lid; neither of these is included in the scope of delivery.How does the DT 100 H differ from the heated SUPER RK 100 H?Both models have the same tank size, but the SUPER RK 100 H is operated via a rotary knob, whilst the DT 100 H is operated via buttons with an LED display and an additional DEGAS function.How long does the appliance run without any input before it switches off?After 12 hours without any buttons being pressed, the automatic safety shut-off switches the appliance off.Technical detailsTotal volume3.0 lWorking capacity2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mm (excluding handles/ball valve, including feet)Weightnet 3.5 kg / gross 4.4 kgTank materialStainless steel 1.4301, 1.0 mmUltrasonic frequency35 kHzUltrasonic power80 W nominal power, 320 W peak power, 1 vibration systemHeating power140 WTemperature range20 to 80 °CTimer1/2/3/4/5/10/15/30 minutes (±5 %) or continuous operation, automatic safety shut-off after 12 hoursOperationButtons, LED display showing remaining time and setpoint/actual bath temperatureFunctionsSweepTec, DEGAS rapid degassing, pulse function, dry-run protection for the heaterDrainNo drain/ball valveMains connection230 V AC (±10 %), 50/60 Hz, optionally 115 V AC, 2 m fixed power cable, Protection Class ICurrent consumption230 V 1.0 A / 115 V 2.0 AProtection ratingIP 33ClassificationClass I medical device (EU 2017/745)Scope of delivery1x Bandelin SONOREX DIGITEC DT 100 H ultrasonic bathFixed mains lead (2 m)Instructions for useThe K 3 C insert basket or PK 2 C plastic basket and D 100 lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor a suitable insert basket, lid or a larger DIGITEC model, please contact our procurement service.

The Bandelin SONOREX DIGITEC DT 1028 H has a 500 mm long tank, a capacity of 28 l and a heating power of 1,300 W. The bath temperature can be set between 20 and 80 °C and is shown on the display as both the setpoint and the actual value.Tank and housingThe interior dimensions of the tank are 500 x 300 x 200 mm; it is made of 1.0 mm thick 1.4301 stainless steel, and the housing is made of the same material. The working capacity is 19.0 l; the fill level mark indicates the fill height. The unit measures 535 x 325 x 400 mm externally and weighs 14.7 kg. A G ½ ball valve is fitted at the drain on the left-hand side; a hose connector and hose are included with the unit.Ultrasonic field and heatingEight vibration systems deliver a peak power of 1,200 W at 35 kHz (300 W nominal power). SweepTec prevents standing waves in the ultrasonic field. The DEGAS rapid degassing function is activated at the start of the cleaning process and degasses the bath fluid; the pulse function complements the programme. The 1,300 W heating system is protected against delayed boiling and by dry-run protection. The current consumption is 7.0 A at 230 V and 14.0 A at 115 V.Day-to-day operationThe control panel can be wiped clean. A timer with settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) and a continuous operation mode are available. If someone forgets about the bath, it switches itself off 12 hours after the last button press. The handles on the sides make it easy to carry; the power cable is 2 m long and permanently attached.DT 1028 H or DT 1028The same tank is available without a heater as the SONOREX DIGITEC DT 1028 (14.0 kg, current consumption of just 1.4 A at 230 V). If you need to heat cleaning solutions, choose the H version. The DT 1028 CH features 2.0 mm thick, welded 1.4404 stainless steel and has a capacity of 45 l.Suitable accessoriesFor the DT 1028 H, the K 28 stainless steel insert basket (455 x 245 x 50 mm, mesh size 5 x 5 mm, load capacity up to 10 kg) and the D 1028 lid are available. The K 29 EM insert basket (470 x 240 x 45 mm, mesh size 4 x 4 mm, for standard instruments) requires the KT 30 basket support. In addition, there is the KW 28-0 polypropylene insert tank (437 x 230 x 155 mm), ZF 28 laboratory flask holders (13 pieces), 0.6-litre insert beakers, the UG 40 base frame with four height-adjustable feet and the TW 40 transport trolley.Typical applicationsCleaning of items of various shapes, types and sizesInstruments in the K 29 EM insert basket (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Homogenisation and emulsificationRapid degassing of liquidsSonochemical applications, such as radical generation and enhanced mass transferSample preparation for analysisFrequently asked questionsHow does the H model differ from the model without heating?The H version has a 1,300 W heater with protection against delayed boiling, dry-run protection and a temperature display. The tank, vibration systems and functions are otherwise identical.How long can the cleaning duration be set for?In increments of 1, 2, 3, 4, 5, 10, 15 and 30 minutes, or in continuous operation.Where is the drain located?On the left, as a G ½ ball valve.What is the current consumption?7.0 A at 230 V, 14.0 A at 115 V.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm (excluding handles and ball valve, including feet)Weight (net)14.7 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power1,300 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 mins (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ½, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 7.0 A / 115 V 14.0 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions660 x 455 x 460 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 1028 H ultrasonic bath with heaterPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainBaskets, lid, base frame and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service will request quotes for baskets, lids, base frames, trolleys or a bath in a different size from the SONOREX range on your behalf.

The Bandelin SONOREX DIGITEC DT 102 H is a heated ultrasonic bath designed for use on a workbench: It has a capacity of 3.0 l, external dimensions of 260 x 160 x 250 mm and a bath temperature that can be set between 20 and 80 °C. It is operated via buttons. The display shows the remaining cleaning time as well as the setpoint and actual temperature.Tank, heater and drainThe tank measures 240 x 140 x 100 mm internally and is made of 1.0 mm thick 1.4301 stainless steel; the surface is hard-chromed. A fill-level mark indicates the fill height; the working capacity is 2.0 l. The heater has a power rating of 140 W and is fitted with protection against delayed boiling and dry-run protection. The drain is located on the right-hand side as a G ¼ ball valve. The ball valve, hose connector and hose are included with the unit and are fitted to the drain.Ultrasonic field with SweepTec and DEGASTwo vibration systems operate at 35 kHz with a peak power of 480 W and a nominal power of 120 W. The SweepTec function prevents standing waves in the ultrasonic field, so that the ultrasonic treatment becomes more uniform. The DEGAS rapid degassing function is activated at the start of the cleaning process. Degassed liquid further enhances the effect of the ultrasound. A pulse function is also available.Timer, shut-off and operationThe cleaning duration can be selected in increments of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %); alternatively, the bath can run continuously. It switches off automatically 12 hours after the last button press. Handles on the sides make it easier to move the unit; the 2-metre power cable is permanently attached to the unit. The housing is made of 1.4301 stainless steel and is IP 33-rated.DT 102 H comparisonThe SONOREX smart ST 102 H features the same 240 x 140 x 100 mm tank; it operates at 40 kHz and is controlled via a touchscreen with twelve programme memory slots. If you need greater depth whilst maintaining the same footprint, consider the DT 103 H with a 240 x 140 x 150 mm tank, a 4.0-litre capacity and 200 W heating power. The DT 102 H is the suitable choice if button controls, a heating element and the smaller tank are sufficient.Accessories for hangingFor the DT 102 H, there is the K 3 C stainless steel insert basket (200 x 110 x 40 mm, mesh size 5 x 5 mm, load capacity up to 2 kg), the PK 2 C plastic basket (187 x 90 x 56 mm, mesh size 2 mm), the D 100 lid and 0.6-litre insert beakers with lids made of glass, plastic or stainless steel. The KW 3 polyethylene insert tank, complete with lid, is designed for use up to a maximum of 60 °C. The range is complemented by cleaning and disinfection concentrates from Bandelin.Typical applicationsUltrasonic cleaning in medical practices, laboratories and workshops, including items of various shapes and sizesRapid degassing of liquidsSample preparation for analysisSonochemistry, for example radical generation or improved mass transferHomogenisation and emulsificationInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsIs the bath heated?Yes. The heater has a power rating of 140 W, and the temperature can be set between 20 and 80 °C. Protection against delayed boiling and dry-run protection are built in.Is the drain included in the scope of delivery?Yes. A ball valve, hose connector and hose are supplied with the unit and are fitted to the drain on the right-hand side.Are there other plug types available?Yes, versions with UK plugs, Swiss plugs and US plugs for 115 V are available under separate order numbers. This offer is for the 230 V version with a CEE 7/7 EU plug.What happens if the unit is forgotten?The bath switches off automatically 12 hours after the last button press.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mm (excluding handles and ball valve, including feet)Weight (net)4.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, 2 vibration systemsHeating power140 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mm, hard chrome-platedHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 1.2 A / 115 V 2.3 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 102 H ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include an insert basket, lid, insert beakers or concentrates.Individual requirements and procurement serviceFor the insert basket, lid, insert beaker or any other model in the SONOREX DIGITEC range, our procurement service accepts enquiries, including for versions with different plugs.

Anyone wishing to clean large quantities of laboratory glassware, instruments or workpieces needs a basin that holds more than a tabletop unit, yet still fits on the worktop. The Bandelin SONOREX SUPER RK 1028 H offers exactly this intermediate size: a total capacity of 28 litres, a working capacity of 19 litres and a heater that brings the bath up to 80 °C. Bandelin lists this ultrasonic bath with heating as a Class I medical device in accordance with Regulation (EU) 2017/745. The suitability of instruments for cleaning depends on the instrument manufacturer’s specifications.Heated cleaning with a uniform ultrasonic fieldThe 1,300-watt heater regulates the bath temperature continuously between 30 and 80 °C and switches off via the dry-run protection if the water level is too low. Warmer water dissolves fats and dried-on residues more quickly than cold water, which is why the heating function is particularly useful for soiling that comes away only slowly at room temperature. The SweepTec function automatically modulates the ultrasonic field and prevents standing waves in the tank, so that the cavitation effect also reaches the edge areas of the tank. At an operating frequency of 35 kHz, the unit achieves a peak power of 1200 watts with a nominal power of 300 watts; in addition, a pulse function can be activated to provide a brief surge of energy.Selection guide: When is the RK 1028 H worthwhile?When choosing a model from the SUPER-RK series, the batch size is the key factor. With a working capacity of 19 litres, the RK 1028 H is sufficient for several flasks, beakers or a larger number of small parts in a single cleaning cycle; for individual instruments or small batches, the more compact models in the range, such as the RK 100 H with a 3-litre capacity or the RK 510 H with a 9.7-litre capacity, are often sufficient. For cleaning agents that have a more corrosive effect on the standard tank, for example, when more aggressive concentrates are used frequently, the sister models RK 1028 C and RK 1028 CH are available with a welded tank made from molybdenum-alloyed stainless steel 1.4404, which is generally more resistant to chlorides than the 1.4301 material used here. The tank of the RK 1028 H is 1.0 mm thick.The RK 1028 range and alternativesWithin the 1028 size range, the three variants differ only in terms of tank material and heating element: The RK 1028 H features the standard 1.4301 tank and a heating element; the RK 1028 C features the higher-grade 1.4404 tank without a heating element; and the RK 1028 CH combines both. Those who prefer a digital display and push-button controls to a rotary knob will find comparable technology in Bandelin’s SONOREX-DIGITEC range, featuring an LED display for setpoint and actual temperature values; however, this is currently only available in smaller sizes up to 13 litres. In addition to Bandelin, there are also ultrasonic baths from Elma, such as the Elmasonic P series with switchable dual-frequency technology, for laboratories that wish to switch between two frequencies rather than operating continuously at 35 kHz.Use and maintenanceTo ensure consistent cleaning results, the tank should be filled to a working capacity of 19 litres, not to the total volume of 28 litres; the total volume refers to the tank filled to the brim without the items to be cleaned. To change the cleaning solution, the bath can be drained via the ball valve on the drain, specified in the data sheet as G 1/2 inch on the left-hand side of the unit. Cleaning and disinfectant concentrates for the SONOREX series are available as accessories and are not included in the scope of delivery, nor are the insert basket and lid. The fixed power cable is 2 metres long; the unit operates on either 230 V or 115 V, at 50/60 Hz in each case.Typical applicationsCleaning and preparation of laboratory glassware such as flasks, beakers and pipettesCleaning of instruments, the suitability of the instruments depends on the instrument manufacturer’s specificationsDegassing of solvents prior to analytical proceduresCleaning of small parts and tools in workshops and industryFrequently asked questionsHow hot can the water get during operation?The heating system regulates the temperature continuously between 30 and 80 °C; a dry-run protection feature switches the heating off if the water level is too low.Are the basket and lid included in the scope of delivery?No, both are available as accessories; the K 28 insert basket and the D 1028 lid are suitable.Can the unit also be operated at 115 volts?Yes, the RK 1028 H is designed to operate at either 230 V or 115 V, at 50/60 Hz in each case.Is the unit suitable for use in a dental practice?Bandelin classifies the RK 1028 H as a Class I medical device in accordance with Regulation (EU) 2017/745. The suitability of the instruments depends on the instrument manufacturer’s specifications.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm, excluding handles/ball valve, including feetWeight (net)14.7 kgShipping weight (gross)17.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power1,300 WTemperature range30 to 80 °C, dry-run protection for the heating elementTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand side (as per data sheet)Mains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 7.0 A / 115 V 14.0 AProtection ratingIP 32Packaging dimensions660 x 455 x 460 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 H ultrasonic bath with heatingPermanently attached mains lead (2 m)Instructions for useThe K 28 insert basket and D 1028 lid are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 H.

The Bandelin SONOREX DIGITEC DT 510 has four vibration systems and a tank measuring 300 x 240 x 150 mm internally and with a capacity of 9.7 l. The unit is unheated, is operated via buttons and is drained via a ball valve.Tank and vibration systemsThe working capacity is 6.6 l; the level indicator shows the fill level. The tank is 1.0 mm thick and, like the housing, is made of 1.4301 stainless steel. At 35 kHz, the four vibration systems deliver a peak power of 640 watts; the rated power is 160 watts. The two vibration systems of the DT 255 achieve the same peak power with a narrower tank.SweepTec, pulse and DEGASThe SweepTec function automatically prevents standing waves in the ultrasonic field. In addition, there is a pulse function and the DEGAS degassing function, which is activated at the start of the cleaning process. Twelve hours after the last button press, the unit switches off automatically.Operation and drainControl is via wipeable buttons; the display shows the remaining running time. The timer offers settings of 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %) as well as continuous operation. The G 1/2 ball valve is located on the left-hand side; the hose connector and hose for connecting to the drain are included with the unit. If you require an adjustable heating function ranging from 20 to 80 °C, this is available in the DT 510 H model, which features the same tank.Dimensions, weight and connectionsWith external dimensions of 325 x 265 x 300 mm and a weight of 7.3 kg, the bath can still be easily moved using the side handles. The 2 m long mains cable is permanently connected; the current consumption is 0.7 A at 230 V. Degree of protection IP 33, ambient temperature 5 to 40 °C.Holders, baskets and insertsBandelin offers the following accessories for the DT 510: the K 10 insert basket (250 x 195 x 50 mm, mesh size 5 x 5 mm, up to 10 kg), the GH 10 appliance holder (260 x 200 mm, up to 10 kg), the D 510 lid and the DE 510 perforated lid for four insert cups. The ED 9 injection nozzle holder, made of stainless steel, has holes with diameters of 9.5, 5.5, 4.5 and 3.5 mm. ZF 10 laboratory flask holders secure flasks in the insert basket; the KW 10-0 hanging tray (242 x 182 x 135 mm) is made of polypropylene.Typical applicationsUltrasonic cleaning of items of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of multiple parts simultaneously in the insert basketCleaning of injection nozzles using the ED 9 nozzle holderRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of Class I medical devices; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhere is the drain?On the left-hand side, as a G 1/2 ball valve.Does the DT 510 have a heating function?No. The heated version is the DT 510 H.How many insert cups fit under the perforated lid?The DE 510 perforated lid is designed to hold four insert cups.Are there other plug types available?Bandelin supplies GB, CH and US variants under their own order numbers, such as 3245-GB. The 3245 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mm (excluding handles and ball valve, including feet)Weight (net / gross)7.3 kg / 8.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, display screenFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 510 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert cups, and they are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid, the ED 9 nozzle holder or the heated version DT 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories or another SONOREX model.

The tank of the Bandelin SONOREX DIGITEC DT 514 is almost square, with a base measuring 325 x 300 mm, and has a capacity of 13.5 l at a depth of 150 mm. The bath has four vibration systems, push-button controls and a ball valve drain. This model does not feature a built-in heater.Larger surface area compared to the DT 510The DT 510 has a significantly smaller base area of 300 x 240 mm, whilst the depth of 150 mm is identical. The DT 514 has a working capacity of 9.0 l; the fill-level marker helps with filling. The unit measures 355 x 325 x 305 mm externally and weighs 8.7 kg; side handles make it easier to carry.860 watts peak powerFour vibration systems achieve a peak power of 860 watts at 35 kHz; the nominal power is 215 watts. The SweepTec function automatically prevents standing waves in the ultrasonic field; a pulse function and DEGAS degassing are also included. DEGAS is activated at the start of the cleaning process.Timer, shut-off and drainThe cleaning duration can be set using the buttons to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath runs in continuous operation. The display shows the remaining time; the unit switches off automatically twelve hours after the last button press. The G 1/2 ball valve on the left-hand side drains the tank; a hose connector and hose are included.With or without heatingThe DT 514 H features the same tank and additionally offers 600 watts of heating power for temperatures ranging from 20 to 80 °C. If you need even more depth, you can opt for the DT 514 BH with a tank depth of 200 mm and a capacity of 18.7 l, which is also heated. The DT 514 is suitable if the bath liquid does not need to be heated.Accessories for the large tankBandelin offers the following accessories for the DT 514: the K 14 insert basket (275 x 245 x 50 mm, up to 10 kg), the GH 14 apparatus holder, the D 514 lid and the DE 514 perforated lid for four insert beakers. The KAH 14.3 cassette holder (305 x 205 x 135 mm) holds three 1/1 DIN cassettes, six 1/2 DIN cassettes or twelve 1/4 DIN cassettes and can carry up to 5 kg. The SM 14 silicone studded mat and the KW 14 polypropylene hanging tray with PVC lid (280 x 215 x 145 mm) complete the range.Typical applicationsUltrasonic cleaning of items of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of multiple items simultaneously in an insert basketRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments classified as Class I medical devices; the suitability of the instruments is determined by the instrument manufacturer’s specificationsFrequently asked questionsWhat is the working capacity?9.0 l out of a total capacity of 13.5 l.Does the DT 514 have a heating function?No. Heated versions are the DT 514 H and the DT 514 BH.How many DIN cassettes does the KAH 14.3 cassette holder hold?Three 1/1 cassettes, six 1/2 cassettes or twelve 1/4 cassettes. The holder is not included in the scope of delivery.What mains voltage does the unit require?The 3250 model on offer operates at 230 V~ (± 10 %), 50/60 Hz. For 115 V, Bandelin offers the 3250-1 model. The current consumption is 1.0 A at 230 V.Technical detailsTotal capacity / Working capacity13.5 l / 9.0 lInternal dimensions of the tank (L x W x D)325 x 300 x 150 mmExternal dimensions (L x W x H)355 x 325 x 305 mm (excluding handles and ball valve, including feet)Weight (net / gross)8.7 kg / 10.6 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, nominal power 215 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 1.0 A / 115 V 1.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainBaskets, lids, holders and insert beakers are not included in the scope of delivery, and are available separately.Individual requirements and procurement serviceThe K 14 insert basket, the KAH 14.3 cassette holder, the D 514 lid or a heated version are available on an individual procurement basis. You can request a quote via our procurement service.

The Bandelin SONOREX DIGITEC DT 1028 is the 28-litre bath in the DIGITEC range without a heating element. The tank measures 500 x 300 x 200 mm; eight vibration systems operate at 35 kHz with a peak power of 1,200 W, and the current consumption is 1.4 A at 230 V.Designed without a heaterThe DT 1028 has neither a heating element nor a temperature preset. Consequently, it lacks the boiling delay protection and dry-run protection of the heating; the list of functions includes a pulse function, SweepTec, DEGAS rapid degassing and an automatic shut-off 12 hours after the last button press. If you wish to heat the bath fluid, take a look at the heated DT 1028 H, which features the same tank and 1,300 W of heating power.Tank and dimensionsInside, the tank measures 500 x 300 x 200 mm and is made from 1.0 mm thick 1.4301 stainless steel. The housing is made from the same material. The total capacity is 28.0 l, the working capacity 19.0 l, and there is a fill level mark. Externally, the unit measures 535 x 325 x 400 mm and weighs 14.0 kg. The G ½ ball valve is located on the left-hand side of the drain; a hose connector and hose are supplied.Ultrasonic treatment and operationThe sound field is generated at 35 kHz with a peak power of 1,200 W and a nominal power of 300 W. SweepTec prevents standing waves. The DEGAS function degasses the liquid at the start of the cleaning process. The wipe-clean buttons allow you to select 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %) or continuous operation; the display shows the remaining time. The handles are located on the sides; the 2-metre power cable is permanently attached.Which size is suitable?With just under half the capacity, the SONOREX DIGITEC DT 514, at 13.5 l, is a suitable option. The DT 1028 CH is larger, with a capacity of 45 l, and also features a 1,450 W heater. The DT 1028 is suitable if a 28-litre tank is required and the bath fluid does not need to be heated.AccessoriesThe DT 1028’s range of accessories includes the K 28 insert basket (455 x 245 x 50 mm, mesh size 5 x 5 mm, load capacity up to 10 kg), the D 1028 lid and the GH 28 apparatus holder. The K 29 EM insert basket (470 x 240 x 45 mm, mesh size 4 x 4 mm) requires the KT 30 basket support, whilst the SM 29 silicone studded mat is available in a pack of two. The range also includes the KW 28-0 hanging tray, the ES 4 insert beakers with insert strips for four beakers, the UG 40 base frame and the TW 40 trolley.Typical applicationsUltrasonic cleaning in medical practices, laboratories and workshopsSample preparation for analysis and rapid degassing of liquidsHomogenisation, emulsification and sonochemical applications such as radical generationInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability subject to the instrument manufacturer’s specifications)Frequently asked questionsDoes the DT 1028 have a heating function?No. The model with a heating function is the DT 1028 H.How many vibration systems does the bath have?Eight, operating at 35 kHz and 1,200 W peak power.What is included in the scope of delivery for the drain?A ball valve, hose connector and hose for fitting to the drain on the left-hand side.What is the current consumption?1.4 A at 230 V, 2.8 A at 115 V.Technical detailsTotal capacity / Working capacity28.0 l / 19.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 200 mmExternal dimensions (L x W x H)535 x 325 x 400 mm (excluding handles and ball valve, including feet)Weight (net)14.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ½, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 1.4 A / 115 V 2.8 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions660 x 455 x 460 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 1028 ultrasonic bathPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert basket, lid, base frame and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceFor accessories for the DT 1028 or any other bath from the SONOREX range, our procurement service is available to handle enquiries.

One size larger than the RK 100 H, but with the same simple operating concept: The Bandelin SONOREX SUPER RK 103 H has a total capacity of 4.0 litres and a working capacity of 2.7 litres for cleaning tasks where a little more space is needed for instruments or small parts, without having to switch to a significantly larger bath.Greater performance thanks to two vibration systemsInstead of a single vibration system, as in the RK 100 H, the RK 103 H features two vibration systems operating in parallel, delivering a combined peak power of 560 watts at a nominal power of 140 watts, whilst maintaining a constant operating frequency of 35 kHz. The SweepTec function ensures that this power is distributed evenly across the slightly larger tank surface without standing waves forming.200-watt heater up to 80 °CAs with the other H models in the series, the integrated heater covers a range from 30 to 80 °C, with 200 watts of heating power and dry-run protection. Cleaning duration and temperature are set separately via two rotary knobs; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation.Ball valve drain as a practical difference from the RK 100 HUnlike the RK 100 H, the RK 103 H features a drain: a G 1/4 ball valve on the right-hand side allows for controlled emptying without having to lift or tilt the tank. Given the frequent changes of medium in everyday laboratory work, this is a noticeable advantage over its smaller counterpart. The tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the external dimensions are 260 x 160 x 310 mm with a net weight of 4.6 kg.Guide to choosing between the RK 100 H and RK 103 HAnyone who regularly changes the cleaning medium or requires a working volume of more than 2.0 litres is better off with the RK 103 H (2.7-litre working volume, with drain) than with the smaller RK 100 H without a drain. If even more space is required, for example, to accommodate several beakers at the same time, the RK 510 H, with a total capacity of 9.7 litres, is the next model up in the SUPER RK series.Product range at a glance: SUPER RK, DIGITEC DT and smart STBandelin also offers the same performance class in the DIGITEC DT series, featuring push-button operation, an LED display and automatic DEGAS degassing, as well as in the smart ST series with a touchscreen and programme memory. The RK 103 H is designed for anyone who prefers simple, mechanical operation without a display. In addition, there are Elma Elmasonic ultrasonic baths for laboratories that already rely on this brand.Use and maintenanceThe 2.7-litre working capacity leaves room for the items to be cleaned when filling the bath; the bath should not be filled to the brim. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. Before the first cleaning cycle with a freshly prepared solution, a short initial run in continuous operation helps to expel any trapped air and achieve the full cavitation effect. After the last use of the day, the tank should be drained via the ball valve and wiped dry to prevent any residues from settling.Typical applicationsCleaning of tweezers, scissors and smaller practice instrumentsDegreasing and cleaning of small metal and plastic partsCleaning of cuvettes, filter holders and sample holdersHeat-assisted pre-cleaning prior to further processingFrequently asked questionsWhat is the difference between the RK 103 H and the RK 100 H?The RK 103 H has a larger capacity (4.0 litres instead of 3.0 litres), two vibration systems instead of one, and a ball valve drain, which the RK 100 H does not have.What temperature range is available?30 to 80 °C, controlled via a separate rotary knob.On which side is the drain?On the right, fitted as a ball valve with a G 1/4 connection.Is the unit equally suitable for use in medical practices and laboratories?It is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and is CE-compliant with the Low Voltage, EMC and RoHS Directives. The suitability of the instruments depends on the instrument manufacturer’s specifications.Technical detailsTotal capacity / Working capacity4.0 l / 2.7 lInternal dimensions of the tank (L x W x D)240 x 140 x 150 mmExternal dimensions (L x W x H)260 x 160 x 310 mmWeight (net)4.6 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 560 W, nominal power 140 W, 2 vibration systemsHeating power200 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.5 A / 115 V 3.0 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 380 mmScope of delivery1x Bandelin SONOREX SUPER RK 103 H ultrasonic bath with heatingFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 3 CL insert basket, the D 100 lid or another model from the SUPER RK series, there is an individual procurement need. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

The Bandelin SONOREX DIGITEC DT 1028 CH is a heated ultrasonic bath with a large tank. It has a capacity of 45.0 l (usable volume 30.0 l); the welded tank, made of 1.4404 stainless steel, is 2.0 mm thick, and the 1,450 W heater brings the bath fluid up to 80 °C.Tank dimensions: 500 x 300 x 300 mmThe tank is 500 mm long, 300 mm wide and 300 mm deep on the inside. It is welded from 2.0 mm thick 1.4404 stainless steel; the housing is made of stainless steel. The unit weighs 23.4 kg and measures 540 x 340 x 500 mm externally. The drain consists of a G ½ ball valve with a 50 cm hose on the left-hand side; a level mark indicates the fill level.Ultrasound and heatingEight vibration systems operate at 35 kHz with a peak power of 1,200 W and a nominal power of 300 W. The heating element has a power rating of 1,450 W at 230 V (1,400 W at 115 V) and is adjustable between 20 and 80 °C; it also features boiling delay protection and dry-run protection of the heating. SweepTec prevents standing waves; the DEGAS rapid degassing function is activated at the start of the cleaning process, and there is also a pulse function. The current consumption at 230 V is 7.7 A.OperationThe duration and temperature are preselected using the wipe-clean buttons; the display shows the remaining time, the setpoint and the current value. The duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), plus continuous operation. The bath switches itself off 12 hours after the last button press. Side handles help with moving the 23.4 kg unit.Baskets, lids and base frameAccessories include the K 28 C insert basket (455 x 245 x 50 mm, mesh size 5 x 5 mm, up to 10 kg) and the K 28 CS basket (430 x 240 x 50 mm, up to 40 kg). The D 1028 C lid is designed for the K 28 C basket, whilst the D 1028 CS lid is designed for the K 28 CS basket. The K 28 CA and K 28 CV baskets accommodate six full-face masks and three full-view masks respectively (470 x 270 x 215 mm, mesh size 12.5 x 12.5 mm). The UG 40 stainless steel base frame has four height-adjustable feet; there is also a TW 40 transport trolley and FT 40 film test frames for testing the bath.Where the DT 1028 CH fits into the rangeThe SONOREX DIGITEC DT 1028 H has the same footprint, with a tank depth of 200 mm and a capacity of 28 l (tank made from 1.0 mm thick 1.4301 stainless steel, 1,300 W heater). The DT 1050 CH, with a capacity of 90 l, 16 vibration systems and a peak power of 2,400 W, is the larger model; its tank is also made of welded 1.4404 stainless steel, 2.0 mm thick. The DT 1058 M model, with a capacity of 46 l, does not, however, have a heating element.Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizesCleaning of masks in the K 28 CA and K 28 CV basketsHomogenisation, emulsification and rapid degassing of liquidsSonochemical applications and sample preparation for analysisUltrasonic cleaning in medical practices, laboratories and workshopsInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow much liquid does the tank hold?The total capacity is 45.0 l, the working capacity 30.0 l. The tank has a fill level mark.What is the heating power of the unit?1,450 W at 230 V, 1,400 W at 115 V. The temperature range is between 20 and 80 °C.Where is the drain located?On the left-hand side as a G ½ ball valve with a 50 cm hose.Are there other plug types available?Yes. Bandelin offers GB, CH and US versions (115 V) under separate order numbers; the 230 V version with a CEE 7/7 plug is offered here.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm (excluding handles and ball valve, including feet)Weight (net)23.4 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 1,200 W, nominal power 300 W, 8 vibration systemsHeating power230 V 1,450 W, 115 V 1,400 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, boiling delay protection, dry-run protection of the heating, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4404, 2.0 mm, weldedHousing materialStainless steelDrainG ½ ball valve with 50 cm hose, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 7.7 A / 115 V 15.0 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions670 x 470 x 565 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 1028 CH ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert baskets, lid, base frame and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceFor baskets, lids, base frames or trolleys, and for enquiries regarding the appropriate tank size, please contact our procurement service.

Not every cleaning task requires heat. If you are already working with a medium at a specific temperature or at room temperature, an additional heating element is simply unnecessary technology in the unit. The Bandelin SONOREX SUPER RK 510 has a total capacity of 9.7 litres and a working capacity of 6.6 litres, providing ample space for laboratory glassware and larger small parts; it is deliberately designed without a heating function.Powerful cleaning even without heatAt an operating frequency of 35 kHz, the RK 510 delivers 640 watts of peak power and 160 watts of rated power via four vibration systems. The SweepTec function continuously modulates the ultrasonic field to prevent standing waves from forming and ensure that cavitation acts evenly throughout the tank, even without auxiliary heating.Robust tank for daily useThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick with internal dimensions of 300 x 240 x 150 mm. Operation is via a rotary knob; the timer covers 1 to 15 minutes (± 5 %), and continuous operation is also available. With a net weight of 7.2 kg and external dimensions of 325 x 265 x 300 mm, the unit can be moved around the laboratory with minimal effort.Ball valve drain for easy medium changeA G 1/2 ball valve on the left-hand side allows the tank to be emptied without lifting or tilting it, which is practical when the cleaning medium needs to be changed frequently. IP 32 protection rating and CE conformity according to the Medical Devices Regulation, the Low Voltage Directive, the EMC Directive and the RoHS Directive allow it to be used in laboratories, medical practices and workshops alike.Selection guide: unheated or with heatingThe RK 510 shares the same tank size as the heated RK 510 H; both have a capacity of 9.7 litres, with a working volume of 6.6 litres. Those working exclusively with cold or pre-tempered media can save on the additional heating technology with the RK 510. As soon as grease or oil residues require a higher bath temperature, the RK 510 H is the more suitable choice, given the identical tank size.Product range breakdown: SUPER RK, DIGITEC DT and smart STWithin the SUPER RK series, the range extends from 0.9 litres (RK 31) to 58 litres (RK 1050), with operation consistently via rotary knobs. Those looking instead for a digital display with DEGAS degassing will find this in the DIGITEC DT series, whilst the smart ST series features touchscreen operation with programme memory. In addition to Bandelin SONOREX, we also offer Elma Elmasonic ultrasonic baths in our range.Use and maintenanceThe working capacity of 6.6 litres is deliberately set below the total capacity of 9.7 litres to prevent water from spilling over the rim when beakers or laboratory glassware are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for use as the cleaning fluid. A short pre-run in continuous operation before the first cleaning cycle removes dissolved air from freshly prepared medium. After the last use of the day, the tank can be drained via the ball valve and then wiped dry to prevent limescale or cleaning agent residues.Typical applicationsCleaning of beakers and laboratory glassware without the need for heatDegassing of aqueous solutions prior to analytical proceduresCleaning of tools and small parts in the workshopPre-cleaning of larger batches of instruments prior to further processingFrequently asked questionsCan the RK 510 be heated?No, the RK 510 is the unheated version; the heated version with the same tank size is the RK 510 H.Where is the drain?On the left, as a ball valve with a G 1/2 connection.How much volume is actually available for cleaning?6.6 litres working capacity with a total capacity of 9.7 litres.Is the device a medical device?Yes, Class I according to Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity9.7 l / 6.6 lInternal dimensions of the tank (L x W x D)300 x 240 x 150 mmExternal dimensions (L x W x H)325 x 265 x 300 mmWeight (net)7.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, rated power 160 W, 4 vibration systemsTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 0.7 A / 115 V 1.4 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions450 x 390 x 375 mmScope of delivery1x Bandelin SONOREX SUPER RK 510 ultrasonic bathFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 10 insert basket, the D 510 lid or the heated version RK 510 H, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories, a replacement basket or another model from the SONOREX range.

A round tank, 240 mm in diameter and 130 mm deep, distinguishes the Bandelin SONOREX DIGITEC DT 106 from the rectangular DIGITEC models. The tank holds 5.6 l, has four vibration systems with a peak power of 480 W at 35 kHz and operates without a heater.Round tankThe tank has an internal diameter of 240 mm and a depth of 130 mm. It is made of 1.4301 stainless steel, 1.0 mm thick, and the housing is made of the same material. The working capacity is 4.0 l; a fill-level mark indicates the fill height. Externally, the unit measures Ø 265 x 270 mm and weighs 5.1 kg; it has no handles.Ultrasonic field without heatingFour vibration systems generate a peak power of 480 W at 35 kHz (nominal power 120 W); the current consumption at 230 V is 0.6 A. There is no heating element. SweepTec prevents standing waves in the ultrasonic field; the DEGAS rapid degassing function is activated at the start of the cleaning process, and a pulse function is available. If you require a heating function, compare this with the DT 102 H (3.0 l, 140 W heating power) or the DT 156 BH (9.0 l, 600 W).OperationThe DT 106 is operated using wipe-clean buttons; a display shows the remaining time. Options include 1 to 5 minutes in 1-minute increments, 10, 15 and 30 minutes (± 5 %), as well as continuous operation. The bath switches off 12 hours after the last button press. The drain is a G ¼ ball valve on the right-hand side; the hose connector and hose are included with the unit, and the mains cable (2 m) is permanently fitted.Basket, lid and insertsThe K 6 stainless steel hanging basket has a diameter of 215 mm and a depth of 50 mm (mesh size 5 x 5 mm, load capacity up to 5 kg) and is part of the range of accessories for this model. Also available are the lid D 6, the perforated lid DE 6, 0.6-litre insert beakers made of glass, plastic or stainless steel, the sieve baskets KD 0 and PD 04, and the sieve holder SH 7. The FT 4 film test frame and the FL 4 film cut-outs are used to test the bath.Alternative with an oblong tankThe SONOREX DIGITEC DT 156 offers a similar volume in an elongated design, with a capacity of 6.0 l and a tank measuring 500 x 140 x 100 mm. The DT 106 has a tank diameter of 240 mm; the tank of the DT 156 is 140 mm wide and 500 mm long.Typical applicationsCleaning of objects of various shapes, types and sizesRapid degassing of liquids and sample preparation for analysisHomogenisation, emulsificationSonochemical applications such as radical generationInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsWhat shape is the bath?Round, 240 mm in diameter and 130 mm deep.Does it have a heating element?No. For a heated bath of this size, other models in the DIGITEC range are available.Which basket is compatible with the unit?The K 6 stainless steel hanging basket, 215 mm in diameter and 50 mm deep, with a load capacity of up to 5 kg.What is the current consumption?0.6 A at 230 V, 1.1 A at 115 V.Technical detailsTotal capacity / Working capacity5.6 l / 4.0 lInternal dimensions of tank (Ø x D)Ø 240 x 130 mmExternal dimensions (Ø x H)Ø 265 x 270 mm (excluding ball valve, including feet)Weight (net)5.1 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G ¼, right-hand sideHandlesNoneOperating voltage230 V AC (± 10 %), 50/60 Hz, alternatively 115 V AC (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 0.6 A / 115 V 1.1 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions340 x 340 x 340 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 106 ultrasonic bathPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainThe hanging basket, lid, insert beakers and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service can enquire on your behalf about a round basket, lid, sieve holder or another SONOREX bath.

The Bandelin SONOREX DIGITEC DT 1050 CH is a heated ultrasonic bath with a capacity of 90.0 l, a tank measuring 600 x 500 x 300 mm, 16 vibration systems and a peak power output of 2,400 W. The unit weighs 35.9 kg and is supplied in a carton on a Euro pallet.Tank and constructionThe tank is welded from 1.4404 stainless steel and is 2.0 mm thick. The working capacity is 60.0 l, and a level mark indicates the fill level. The unit’s external dimensions are 640 x 540 x 530 mm. The drain consists of a G ½ ball valve with a 50 cm hose on the left-hand side; the handles are located on the sides. The mains cable is 2 m long and permanently attached to the unit.Performance and heating16 vibration systems achieve a peak power of 2,400 W at 35 kHz, with a nominal power of 600 W. The heater has a power rating of 1,950 W at 230 V and 1,050 W at 115 V; the bath temperature can be set between 20 and 80 °C. Boiling delay protection and dry-run protection of the heating are built in. The current consumption is 11.1 A at 230 V and 14.4 A at 115 V. The designated circuit must be capable of handling this load.Functions and timerSweepTec ensures the sound field remains free of standing waves. At the start of a run, the liquid can be degassed using DEGAS; a pulse function is also included. The display shows the remaining time and temperature. The duration can be set in increments of one minute up to 5 minutes, and thereafter in increments of 10, 15 or 30 minutes (± 5 %), or the bath can run continuously. It switches off automatically after 12 hours unless a button is pressed.Accessories for large batchesAccessories include the K 50 C insert basket (545 x 450 x 50 mm, mesh size 5 x 5 mm, up to 10 kg) with the D 1050 C lid, as well as the K 50 CS basket (530 x 445 x 50 mm, mesh size 12.5 x 12.5 mm, up to 40 kg) with the D 1050 CS lid. The K 50 CA and K 50 CV baskets hold nine full-face masks and six full-view masks respectively. Also available are the KW 50 B-0 hanging tray (520 x 445 x 284 mm), the UG 75 stainless steel base frame on four height-adjustable feet, the TW 75 transport trolley and the FT 45 film test frame (550 x 585 mm) for testing the bath.Size comparisonThe SONOREX DIGITEC DT 1028 CH has a capacity of 45 l, eight vibration systems and a peak power of 1,200 W in a tank measuring 500 x 300 x 300 mm. The DT 1058 M has a capacity of 46 l, also 16 vibration systems and 2,400 W, but no heating. The DT 1050 CH is suitable for users who require both a large volume and a heated liquid.Typical applicationsSonication of large batches in the 90-litre tank (working capacity 60 l)Cleaning of masks in the K 50 CA and K 50 CV basketsHomogenisation, emulsification and rapid degassing of liquidsSonochemical applications, sample preparation for analysisInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow is the unit delivered?In a carton on a Euro pallet (1,200 x 800 x 740 mm); the shipping weight, including the pallet, is 61.0 kg.What is the heating power?1,950 W at 230 V and 1,050 W at 115 V.Where is the drain located?On the left, as a G ½ ball valve with a 50 cm hose.Are there other plug types available?Yes, there are separate order numbers for the UK, Switzerland and the US mains supply (115 V). The 230 V version is supplied with a CEE 7/7 plug.Technical detailsTotal capacity / Working capacity90.0 l / 60.0 lInternal dimensions of the tank (L x W x D)600 x 500 x 300 mmExternal dimensions (L x W x H)640 x 540 x 530 mm (excluding handles and ball valve, including feet)Weight (net)35.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 W, 16 vibration systemsHeating power230 V ~ 1,950 W / 115 V ~ 1,050 WTemperature range20 to 80 °CTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, boiling delay protection, dry-run protection of the heating, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4404, 2.0 mm, weldedDrainG ½ ball valve with 50 cm hose, left-hand sideHandlesOn the sidesOperating voltage230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 11.1 A / 115 V 14.4 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging1200 x 800 x 740 mm, carton on a Euro palletShipping weight (gross, including pallet)61.0 kgScope of delivery1x Bandelin SONOREX DIGITEC DT 1050 CH ultrasonic bath with heatingPermanently attached mains cable (2 m)Ball valve, hose connector and hose for fitting to the drainInsert baskets, lid, base frame, trolley and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service can assist with baskets, lids, frames or trolleys for the DT 1050 CH, as well as advising on the appropriate tank size.

At 100 mm deep, the tank of the Bandelin SONOREX DIGITEC DT 156 is shallower than that of the DT 156 BH, whilst the other dimensions remain the same: 500 mm long, 140 mm wide, with a total capacity of 6.0 litres and a working capacity of 4.0 litres. The bath has no heating and is operated via buttons.Flat and longThe inner dimensions of the tank are 500 x 140 x 100 mm. It is made from 1.0 mm thick 1.4301 stainless steel; the housing is made from the same material. Externally, the unit measures 530 x 165 x 245 mm and weighs 6.3 kg; it has no handles. A level mark indicates the fill level. A G ¼ ball valve is fitted on the right-hand side of the drain; a hose connector and hose are included with the unit.Ultrasound without heatingThere is no heating element, so there is no temperature preselection and no boiling delay protection. The current consumption is 0.7 A at 230 V and 1.4 A at 115 V. The ultrasonic energy is generated by four vibration systems (35 kHz, 640 W peak, 160 W nominal power). In addition, there is SweepTec to prevent standing waves, DEGAS for degassing before start-up, and a pulse function.OperationThe duration is set using wipe-clean buttons and shown on the display: 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), or alternatively, continuous operation. It switches off after 12 hours if no button is pressed. The power cable is 2 m long and permanently attached to the unit.AccessoriesThe K 6 L insert basket (stainless steel, 460 x 100 x 50 mm, mesh size 5 x 5 mm, up to 10 kg) almost fills the entire length of the tank. It is compatible with the lids D 156 and DE 156 (perforated) as well as the SM 6 silicone studded mat (pack of two). The range of accessories also includes 0.6-litre insert beakers, the KD 0 and PD 04 sieve baskets, the PHS 12 sample holder and the FT 6 film test frame with FL 14 films.DT 156, DT 156 BH and the alternativesThe SONOREX DIGITEC DT 156 BH is 150 mm deep, has a capacity of 9.0 litres and features a 600 W heater, whilst retaining the same length and width. The DT 106 has a round tank (Ø 240 x 130 mm) and holds 5.6 litres. The SUPER RK bath SONOREX SUPER RK 156 BH with rotary knobs has the same tank size as the DT 156 BH.Typical applicationsCleaning flat, elongated objectsHomogenisation, emulsification and rapid degassingSonochemistry and sample preparation for analysisInstrument cleaning (Class I medical device in accordance with Regulation (EU) 2017/745; suitability as specified by the instrument manufacturer)Frequently asked questionsHow deep is the tank?100 mm, with a length of 500 mm and a width of 140 mm.Does the bath have heating?No. The heated version with a deeper tank is the DT 156 BH.Which basket fits?The K 6 L insert basket, 460 x 100 x 50 mm, with a load capacity of up to 10 kg.How many vibration systems does the bath have?Four, operating at 35 kHz and with a peak power of 640 W.Technical detailsTotal capacity / Working capacity6.0 l / 4.0 lInternal dimensions of the tank (L x W x D)500 x 140 x 100 mmExternal dimensions (L x W x H)530 x 165 x 245 mm (excluding handles and ball valve, including feet)Weight (net)6.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 640 W, nominal power 160 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 minutes (± 5 %) or continuous operationOperationButtons, wipe-clean, displayFunctionsPulse function, SweepTec, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, 1.0 mmHousing materialStainless steel 1.4301DrainG ¼ ball valve, right-hand sideHandlesNoneOperating voltage230 V~ (± 10 %), 50/60 Hz, or 115 V~ (± 10 %), 50/60 Hz (separate order number)Current consumption230 V 0.7 A / 115 V 1.4 AMains cable2 m, permanently attached to the unitLeakage current< 3.5 mADegree of protection / Protection classIP 33 / Class IPermissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions655 x 265 x 320 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 156 ultrasonic bathPermanently attached mains lead (2 m)Ball valve, hose connector and hose for fitting to the drainThe insert basket, lid, mat and concentrates are not included in the scope of delivery.Individual requirements and procurement serviceOur procurement service can enquire on your behalf about an insert basket, lid or any other SONOREX bath.

Sensor tips, small cannulas, jewellery or individual cuvettes do not require a large bath for ultrasonic cleaning; rather, they need a bath that delivers uniform cavitation to every corner of the tank. With a total capacity of 0.9 l, the Bandelin SONOREX SUPER RK 31 is the smallest model in the SUPER RK series and is designed specifically for these small-item cleaning tasks in laboratories, medical practices and workshops.Small tank, noticeable cavitationAt an operating frequency of 35 kHz, the RK 31 generates a peak ultrasonic power of 160 watts at a nominal ultrasonic power of 40 watts, distributed across a single vibration system. This is sufficient for the small tank volume of 0.9 l (working capacity 0.6 l); larger SUPER RK models, such as the RK 514 BH, on the other hand, operate with four vibration systems covering a significantly larger area. The automatic SweepTec function continuously adjusts the frequency slightly, thereby preventing standing waves in the ultrasonic field; as a result, the cleaning effect remains uniform even in small volumes.Thin stainless steel tank for the laboratory benchThe oscillating tank is made of 1.4301 stainless steel with a thickness of 0.8 millimetres; the housing is made from the same material. The internal dimensions of 190 x 85 x 60 mm and the compact external dimensions of 205 x 100 x 180 mm ensure that the unit, with a net weight of 2.2 kg, can still be accommodated even on already occupied work surfaces. The RK 31 is operated via a robust rotary handle; the timer ranges from 1 to 15 minutes (tolerance ± 5 %), and continuous operation is also available.No drain, no heating, but simpleThis model has no drain; a ball valve is not provided for this size. With a capacity of 0.9 l, the tank can be emptied directly over the edge after the cleaning cycle; an additional connection would be rather cumbersome in this case. Similarly, the RK 31 does not feature a heating element. Anyone requiring heating for cleaning in the same size should choose the RK 31 H with a fixed 65 °C; the next larger model with adjustable heating is the RK 100 H.Selection guide for the SUPER RK seriesThe SUPER RK series from Bandelin covers a wide range: from the RK 31 with a 0.9-litre capacity to the RK 1050 with a total capacity of 58 l. If you are only cleaning individual small parts, sensor tips or cuvettes, you are properly equipped with the RK 31. If the batch size increases to include several instruments or small glass vessels, it is worth considering the RK 100 H (3.0 l, heated) or the RK 103 H (4.0 l, heated and with a drain). For entire sieves or beakers, the larger models from the RK 510 (9.7 l) upwards are the more suitable choice.SUPER RK, DIGITEC DT and smart ST comparedIn addition to the SUPER RK series with classic rotary knob control, Bandelin offers the DIGITEC DT series with push-button control, an LED display and DEGAS degassing, as well as the smart ST series with a touchscreen, finely adjustable power control and programme memory. Those who only clean occasionally and value straightforward, robust operation would be well advised to choose a SUPER RK model such as the RK 31. We also offer Elma Elmasonic ultrasonic baths, an alternative for laboratories already equipped with this brand.Use and maintenanceThe working capacity of 0.6 l is deliberately set below the total capacity of 0.9 l, as space must be left for the items being cleaned when filling the bath; otherwise, the liquid will spill over the rim. As for the cleaning solution itself, Bandelin offers its own TICKOPUR range of concentrates; for the SONOREX PR series of pipette cleaners, this is included in the set, whilst a suitable concentrate for the RK 31 must be purchased separately. Freshly prepared cleaning fluid contains dissolved air, which initially dampens cavitation; a short pre-run in continuous operation before the actual cleaning process dispels it. The stainless steel tank is compatible with most aqueous cleaning agents; however, abrasive sponges or chlorine-based agents should still be avoided. At the end of the working day, it is best to empty and dry the tank.Typical applicationsCleaning of small sensor tips, cannulas and needlesPrecision cleaning of jewellery and small metal partsPre-cleaning of precision mechanical components and watch movementsCleaning individual cuvettes or small sample vessels in the laboratoryFrequently asked questionsIs the SONOREX SUPER RK 31 heated?No, the RK 31 is unheated. The heated version with the same volume is the RK 31 H (fixed at 65 °C); the next larger model with adjustable heating is the RK 100 H.Does the unit have a drain?No, the RK 31 has no ball valve; with a capacity of 0.9 l, the bath is emptied directly.Is the RK 31 a medical device?Yes, it is classified as a Class I medical device according to Regulation (EU) 2017/745 and is also CE-compliant with the Low Voltage, EMC and RoHS Directives.Are the basket and lid included in the scope of delivery?No, the K 08 insert basket and the D 08 lid are available separately as accessories.Technical detailsTotal capacity / Working capacity0.9 l / 0.6 lInternal dimensions of tank (L x W x D)190 x 85 x 60 mmExternal dimensions (L x W x H)205 x 100 x 180 mmWeight (net)2.2 kgUltrasonic frequency35 kHzUltrasonic powerPeak ultrasonic power 160 W, nominal ultrasonic power 40 W, 1 vibration systemTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drain/ball valveMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 0.2 A / 115 V 0.4 AProtection ratingIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions320 x 235 x 205 mmScope of delivery1x Bandelin SONOREX SUPER RK 31 ultrasonic bathFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 08 insert basket, the D 08 lid or a larger SUPER RK model, there is an individual procurement requirement. You can use our procurement service to request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

Long pipettes, tubing, tools or torches rarely fit into a square tank. The Bandelin SONOREX SUPER RK 156 BH, with internal dimensions of 500 x 140 x 150 mm, is deliberately designed to be narrow and long, thus providing a total capacity of 9.0 l for elongated items that cannot be accommodated in the more compact SUPER RK models.Narrow tank for elongated objectsWhilst most SUPER RK models have approximately square tanks, the RK 156 BH, measuring 500 mm in length and just 140 mm in width, is tailored to slender items: shorter laboratory glass rods, tools, hoses or several smaller instruments placed side by side. The working capacity is 6.0 l, and four vibration systems ensure uniform ultrasonic agitation across the entire length of the tank.600-watt heater for thorough cleaningAt an operating frequency of 35 kHz, the RK 156 BH delivers 860 watts of peak power and 215 watts of rated power; the SweepTec function prevents standing waves across the elongated tank shape. The 600-watt heater covers a range of 30 to 80 °C and is fitted with dry-run protection; the timer ranges from 1 to 15 minutes (± 5 %) or continuous operation, controlled via rotary knobs for time and temperature.Ball valve drain and robust constructionA G 1/4 ball valve on the right-hand side allows the tank to be drained in a controlled manner. The tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the external dimensions of 530 x 165 x 300 mm and the net weight of 7.3 kg correspond to the narrow, elongated design. The housing is IP 32-rated, and the 2-metre power cable is permanently attached to the unit.When the BH design is suitableFor compact, roughly cube-shaped items to be cleaned, the standard SUPER RK models, such as the RK 510 H (9.7 l, but with a more square tank), are often the more practical choice. The RK 156 BH is worth considering where the length of the items to be cleaned is the main issue, such as with rods, longer tools or multiple objects that need to be placed side by side rather than on top of one another.Product range breakdown: SUPER RK, DIGITEC DT and smart STThe slim BH design is currently only available within the SUPER RK series with classic rotary knob controls. Those looking instead for digital button controls with an LED display will find them in the DIGITEC DT series, whilst the smart ST series features touchscreen controls with programme memory. We also offer Elma Elmasonic ultrasonic baths, although these are built with different tank shapes.Use and maintenanceThe working capacity of 6.0 l is less than the total capacity of 9.0 l, ensuring that no water spills over the rim when the items to be cleaned are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable as the cleaning agent. Freshly prepared liquid should be run briefly in continuous operation before the first cleaning cycle, so that dissolved air escapes and cavitation can take full effect. After use, the tank can be drained completely via the ball valve, leaving no residue, and then wiped dry.Typical applicationsCleaning of elongated tools, rods and hosesSimultaneous cleaning of several smaller instruments side by sidePre-cleaning of narrow laboratory glassware prior to further processingDegreasing of elongated metal parts in workshops and industryFrequently asked questionsWhy is the tank so narrow and long?The internal dimensions of 500 x 140 x 150 mm are specifically designed for elongated items that do not fit into more square-shaped tanks.Where is the drain?On the right, as a ball valve with a G 1/4 connection.Is the RK 156 BH heated?Yes, with a heating power of 600 watts and a temperature range of 30 to 80 °C.How many vibration systems does the unit have?Four, distributed along the entire length of the tank to ensure uniform agitation.Technical detailsTotal capacity / Working capacity9.0 l / 6.0 lInternal tank dimensions (L x W x D)500 x 140 x 150 mmExternal dimensions (L x W x H)530 x 165 x 300 mmWeight (net)7.3 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating power600 W, temperature range 30 to 80 °C, dry-run protectionTimer1 to 15 minutes (± 5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/4, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ADegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions655 x 265 x 370 mmScope of delivery1x Bandelin SONOREX SUPER RK 156 BH ultrasonic bath with heaterFixed mains lead (2 m)Instructions for useThe insert basket and lid are not included in the scope of delivery and are available separately.Individual requirements and procurement serviceFor the K 6 BL insert basket, the D 156 lid or another tank shape from the SUPER RK series, individual procurement requirements apply. You can request a quote without obligation via our procurement service for suitable accessories, a replacement basket or another model from the SONOREX range.

Not every cleaning task requires heat; indeed, some cleaning agents and materials do not tolerate it well. The Bandelin SONOREX SUPER RK 1028 C operates without heating and instead features a welded tank made from high-alloy stainless steel 1.4404 (AISI 316L). With a total capacity of 45 litres and a working capacity of 30 litres, this ultrasonic bath is one of the larger models in the SUPER-RK series and, like all units in the range, is classified as a Class I medical device in accordance with Regulation (EU) 2017/745.Robust tank for continuous operation without heatingThe 1.4404 grade is molybdenum-alloyed and is therefore generally more resistant to chlorides and more aggressive cleaning agents than the standard 1.4301 grade, from which the other unheated SUPER-RK models, such as the RK 1040, are manufactured. The tank is welded rather than drawn and has a thickness of 2.0 mm, twice that of the standard RK 1028 H model. On the ultrasonic side, the RK 1028 C delivers a peak power of 2,000 watts and a nominal power of 500 watts at 35 kHz, distributed across ten vibration systems. The SweepTec function operates fully automatically to counter standing waves in the acoustic field, whilst an additional pulse function briefly increases the energy output to tackle more stubborn dirt.Typical applicationsCleaning of larger batches of laboratory glassware, tools and componentsPreparation and degassing of cleaning media prior to analytical processesUse with cleaning concentrates that are more aggressive towards standard stainless steelWorkshop and industrial applications with high throughput and no temperature requirementsThe 1028 series and alternatives in the rangeIf you additionally need heating, the RK 1028 CH with an identical tank offers the heated version with the same tank material. If the standard 1.4301 tank is sufficient, the RK 1028 H with the same volume and heating is the more cost-effective alternative. For smaller batches without heating, Bandelin also offers the RK 510 with a capacity of 9.7 litres and the RK 1040 with a round tank and a capacity of 39.5 litres. In addition to the SONOREX range, we also offer ultrasonic baths from Elma, for example with switchable dual-frequency technology, for applications where a fixed frequency of 35 kHz is insufficient.Use and maintenanceThe tank is filled to a working capacity of 30 litres; the total volume of 45 litres refers to the tank filled to the brim without the items to be cleaned. The ball valve on the drain, specified in the data sheet as G 1/2 inch on the left-hand side of the unit, is used for draining and changing the cleaning medium. The insert basket and lid are not included in the scope of delivery; for the RK 1028 C, the K 28 C or K 28 CS baskets are suitable, with the corresponding lids D 1028 C or D 1028 CS respectively. Cleaning concentrates for the SONOREX series can be purchased separately. The power cable is 2 metres long and permanently attached to the unit; operation is possible with either 230 V or 115 V.Frequently Asked QuestionsWhy does the RK 1028 C not have heating?This is the unheated basic version of the 1028 model; for heated operation with the same tank, there is the sister model RK 1028 CH.What distinguishes the 1.4404 tank from the standard tank?The tank of the RK 1028 C is welded rather than drawn, 2.0 mm thick instead of 1.0 mm, and is made from the molybdenum-alloyed stainless steel 1.4404, which is generally more resistant to chlorides than the standard material 1.4301.How much does the unit weigh when shipped?The net weight of the RK 1028 C is 24.9 kg; when packed in a carton, the weight increases to 28.0 kg.Is the device classified as a medical device?Yes, Bandelin classifies the RK 1028 C as a Class I medical device in accordance with Regulation (EU) 2017/745.Technical detailsTotal capacity / Working capacity45.0 l / 30.0 lInternal dimensions of the tank (L x W x D)500 x 300 x 300 mmExternal dimensions (L x W x H)540 x 340 x 500 mm, excluding handles/ball valve, with feetWeight (net)24.9 kgShipping weight (gross)28.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 2,000 W, nominal power 500 W, 10 vibration systemsHeatingNot applicable, unheated modelTimer1 to 15 minutes (±5 %) or continuous operationOperationRotary knobFunctionsSweepTec, pulse functionTank materialStainless steel 1.4404 (AISI 316L), welded, thickness 2.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideMains connection230 V~ (±10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 2.2 A / 115 V 4.4 ADegree of protectionIP 32Packaging dimensions670 x 470 x 565 mmMedical device classClass I in accordance with Regulation (EU) 2017/745Scope of delivery1x Bandelin SONOREX SUPER RK 1028 C ultrasonic bathPermanently attached mains cable (2 m)Instructions for useThe insert basket (K 28 C or K 28 CS) and lid (D 1028 C or D 1028 CS) are not included in the scope of delivery and are available separately as accessories.Individual requirements and procurement serviceOur procurement service can assist you in finding a suitable insert basket, lid or cleaning concentrates for the SONOREX SUPER RK 1028 C.

Same tank size as the SUPER RK 100 H, but with a completely different operating system: With a total capacity of 3.0 litres and touchscreen controls, the Bandelin SONOREX smart ST 102 H is the digital alternative for users who wish to fine-tune cleaning cycles and repeat them consistently.Touchscreen instead of a rotary knobA touchscreen takes over the operation instead of a mechanical rotary knob. The ultrasonic power can be adjusted from 10 to 100 % in 1 % increments, whilst the timer accepts any value from 1 second to 8 hours in 1-second increments. Twelve programme memories, including an ECO programme, allow cleaning cycles to be saved once they have been set and recalled later with a single tap, rather than having to reset the time, power and temperature each time.40 kHz instead of 35 kHz, plus DEGAS degassingUnlike the SUPER RK series, the smart ST 102 H operates at an ultrasonic frequency of 40 kHz, with a peak power of 480 watts and a nominal power of 120 watts. In addition to the SweepTec function, there is an automatic DEGAS rapid degassing feature, which removes dissolved air from freshly prepared cleaning fluid before the actual cleaning process begins, supplemented by a pulse mode and an interval operation ranging from 1 to 60 seconds.Heating up to 80 °C, in 1-degree incrementsThe 140-watt heater covers a range from 20 to 80 °C, adjustable in 1-degree increments rather than over a continuous range as with the SUPER RK models, and also features boiling delay protection and dry-run protection. Drainage is via a G 1/4 ball valve with a 25 cm hose on the right-hand side.Hard-chromed tank and system bus interfaceAs with the SUPER RK series, the tank and housing are made of 1.4301 stainless steel with a thickness of 1.0 mm; the tank is also hard-chromed. The unit can be connected to a docking station via a system bus interface with a 4-pin M12 socket. A lithium backup battery (CR 2032, 3 V) safeguards the stored programmes even in the event of a power cut.SUPER RK, DIGITEC DT or smart ST: choose the suitable control optionBandelin offers this same compact 3.0-litre tank size in three control concepts: with a rotary knob in the SUPER RK series (such as the RK 100 H), with push-button controls and an LED display in the DIGITEC DT series, or with a touchscreen and programme memory in the smart ST 102 H. Those wishing to store cleaning parameters for different items in a reproducible manner will benefit from the smart ST series, whilst those who prefer simple, robust operation without electronics should opt for the RK 100 H. We also offer Elma Elmasonic ultrasonic baths as a further brand.Use and maintenanceThe working capacity of 2.0 litres is less than the total capacity of 3.0 litres, ensuring that no water spills over the rim when the items to be cleaned are placed inside. A concentrate from Bandelin’s TICKOPUR range is suitable for the cleaning fluid. Unlike the SUPER RK models, the DEGAS function of the smart ST 102 H automatically degasses freshly prepared cleaning fluid; a manual pre-run is not necessary. The hard-chromed tank is compatible with standard aqueous cleaning agents, but should be emptied and wiped dry after the last cycle of the day to prevent residues from settling.Typical applicationsReproducible cleaning programmes for recurring test seriesPrecision cleaning of small instruments and sensor tips using stored parametersProcess validation in laboratories and practices with documented settingsConnection to a docking station for networked cleaning processesFrequently asked questionsWhat is the difference between the smart ST 102 H and the SUPER RK 100 H?Both have a tank capacity of 3.0 litres; the smart ST 102 H features a touchscreen, programme memory, DEGAS degassing and operates at 40 kHz instead of 35 kHz.How many programmes can be stored?Twelve, including an ECO programme.Is there a drain?Yes, a G 1/4 ball valve with a 25 cm hose on the right-hand side.Is the appliance also available with a 115 V connection?Yes, according to Bandelin, a 115 V version is available on request, as well as versions with Swiss or British plugs; the model listed here is the standard EU version with 230 V.Technical detailsTotal capacity / Working capacity3.0 l / 2.0 lInternal dimensions of the tank (L x W x D)240 x 140 x 100 mmExternal dimensions (L x W x H)260 x 160 x 250 mmWeight (net)4.4 kgUltrasonic frequency40 kHzUltrasonic powerPeak power 480 W, nominal power 120 W, power adjustment 10 to 100 % in 1 % incrementsHeating power140 W, temperature range 20 to 80 °C in 1 °C increments, boiling delay protection, dry-run protectionTimer1 second to 8 hours in 1-second increments, automatic safety shut-off after 8 hoursOperationTouchscreenFunctionsSweepTec, DEGAS rapid degassing, Pulse mode, interval 1 to 60 s, 12 programme memories including ECO programme, M12 system bus interface (4-pin)Tank materialStainless steel 1.4301, thickness 1.0 mm, hard chrome-platedHousing materialStainless steel 1.4301DrainG 1/4 ball valve with 25 cm hose, right-hand sideMains connection230 V~ (± 10 %), 50/60 Hz, optionally 115 V~, 2 m fixed mains lead, protection class ICurrent consumption230 V 1.2 A / 115 V 2.4 ABack-up batteryLithium button cell CR 2032, 3 VDegree of protectionIP 32Medical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions365 x 265 x 315 mmScope of delivery1x Bandelin SONOREX smart ST 102 H ultrasonic bath with heatingFixed mains lead (2 m)Operating instructionsThe insert basket and lid are not included in the scope of delivery and are available separately.Regulatory informationThe appliance contains a lithium backup battery (CR 2032 button cell, 3 V) for the programme memory. In accordance with the Batteries Act, batteries must not be disposed of with household waste; used batteries can be returned free of charge at local authority collection points and at any shop selling batteries of the relevant type.Individual requirements and procurement serviceThere is a need for individual procurement of the K 3 C insert basket, the PK 2 C plastic basket, the D 100 lid or the docking station. Through our procurement service, you can request a quote for suitable accessories, a replacement basket or another model from the SONOREX range.

The Bandelin SONOREX DIGIPLUS DL 514 BH has been discontinued by the manufacturer and is no longer available. Its successor is the Bandelin SONOREX smart ST 514 BH, which has the same tank size and a finer power setting.Powerful cleaning with digital precision The Bandelin SONOREX DIGIPLUS DL 514 BH is a professional-grade digital ultrasonic bath, specially developed for demanding tasks in laboratories and industry. With a tank volume of 18.7 litres, it offers sufficient space for larger items to be cleaned. A key feature of this model is the power setting from 20 % to 100 % in 10 % increments. This allows you to precisely adjust the intensity of the ultrasound to suit the sensitivity of the items being cleaned, from gentle treatment to the powerful removal of stubborn dirt. Efficient heating and robust construction For optimum cleaning results, the unit features an integrated 600-watt heating element that electronically controls the temperature range from 20 °C to 80 °C. The ultrasonic tank is made of high-quality 1.4301 (V2A) stainless steel with a wall thickness of 1.0 mm. The housing is protected against spraying water (IP 33) and is also made of stainless steel, supporting easy cleaning and durability in daily use. Convenient operation and process reliability Control is via an intuitive membrane keypad. The digital timer allows selection of fixed time intervals (1, 2, 3, 4, 5, 10, 15, 30 min) or continuous operation for longer processes. Thanks to the high ultrasonic peak power of 860 W (at a frequency of 35 kHz), cavitation bubbles are effectively generated to clean thoroughly even in hard-to-reach cavities. After use, the liquid can be conveniently drained via the side-mounted ball valve (G ½). Technical details Tank capacity: 18.7 litres Working capacity: 12.5 litres Internal dimensions (L x W x D): 325 x 300 x 200 mm Nominal ultrasonic power: 215 W Ultrasonic peak power: 860 W Power setting: 20 to 100 % (adjustable) Heating power: 600 W (20 to 80 °C) Frequency: 35 kHz Timer: Intervals (1 to 30 mins) & continuous operation (∞) Drain: G ½ ball valve (left-hand side) Tank/housing material: Stainless steel 1.4301 Degree of protection: IP 33 External dimensions (L x W x H): 355 x 325 x 385 mm Scope of delivery Bandelin SONOREX DIGIPLUS DL 514 BH G ½ ball valve (fitted) Mains lead (2 m, permanently attached to the unit) Operating instructions Note: The basket (K 14 B) and lid (D 514) are not included in the scope of delivery. They are available separately. Individual requirements and procurement service The K 14 B insert basket, the D 514 lid and cleaning chemicals (TICKOPUR) are available as accessories. Our procurement service can arrange suitable accessories on request.

SONOREX SUPER RK 512 H ultrasonic bath with heating for everyday laboratory use The SONOREX SUPER RK 512 H is an ultrasonic bath with heating designed for cleaning tasks in everyday laboratory and practice work. With a total volume of 13 litres and a usable working capacity of 8.7 litres, the stainless steel tank offers sufficient space for laboratory glassware, small parts and instruments. The ultrasonic cleaning operates at a frequency of 35 kHz with a peak power of 860 W and an effective nominal power of 215 W, reliably and gently removing adhering dirt, residues and deposits. Thanks to its compact external dimensions of 325 x 265 x 350 mm, the ultrasonic bath can be flexibly positioned on laboratory benches, workbenches or in smaller cleaning stations without taking up much space. Thanks to the combination of powerful ultrasonic cleaning and adjustable heating, the SONOREX SUPER RK 512 H is suitable both for occasional use at a single workstation and for regular use in laboratories with a higher throughput of small parts and glassware requiring cleaning. Laboratory applications Typical applications for this ultrasonic bath include the cleaning of laboratory glassware and small parts, the pre-cleaning and preparation of instruments, and the degassing of solvents prior to analytical applications. Thanks to its comparatively large working capacity of 8.7 litres, the unit is also suitable for the routine cleaning of pipettes, sample vessels and other small parts used in everyday laboratory work. The integrated heater allows temperature control from 30 to 80 °C, which further enhances the cleaning effect on more stubborn residues and enables a process temperature tailored to the specific application and cleaning agent. The cleaning duration and bath temperature can be set directly and easily on the unit using the rotary knob; the timer covers a range of 1 to 15 minutes (±5 %) as well as continuous operation, so that both short cleaning cycles and longer applications can be carried out. A fill-level mark inside the tank facilitates correct and repeatable filling with cleaning fluid. Robust construction for continuous use The tank and housing of the ultrasonic bath are made of 1.4301 stainless steel; the ultrasonic tank itself has a wall thickness of 1.0 mm. A G 1/2 ball valve on the side, with a hose (packed separately, for mounting), allows the cleaning fluid to be drained easily and cleanly without having to lift or tilt the tank. Handles on the sides make it easy to move the unit, whilst the fixed, 2-metre-long mains cable ensures straightforward connection to a 230 V power supply. With an IP 32 protection rating, the housing is protected against foreign bodies larger than 2.5 mm and dripping water falling at an angle. The unit is CE-marked as a Class I medical device in accordance with Regulation (EU) 2017/745 and also complies with the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. Technical details ModelSONOREX SUPER RK 512 H Frequency35 kHz Ultrasonic powerPeak power 860 W, nominal power (effective) 215 W Heating power400 W Temperature range30 to 80 °C, adjustable Timer1 to 15 min (±5 %), plus continuous operation Total capacity / Working capacity13.0 l / 8.7 l External dimensions (L x W x H)325 x 265 x 350 mm Internal dimensions (L x W x D)300 x 240 x 200 mm Weight10.1 kg Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) DrainG 1/2 ball valve with hose (packed separately, for mounting), left-hand side Degree of protection, housingIP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x SONOREX SUPER RK 512 H ultrasonic bath with heating Operating instructions Fixed mains cable (2 m) Insert baskets, lids and cleaning concentrates are not included in the scope of delivery. Individual requirements & procurement service Our procurement service accepts enquiries for insert baskets, lids, cleaning concentrates or another model in the SONOREX range.

Anyone who regularly has to thoroughly clean instruments, workpieces or glassware in a laboratory, dental practice or workshop is familiar with the problem: cleaning time, temperature and intensity must be precisely tailored to the items being cleaned, without making the operation complicated. The Bandelin SONOREX smart ST 514 BH is an ultrasonic bath with heating and a total capacity of 18.7 litres, designed specifically to address this need. Via the touchscreen, power, temperature and cleaning duration can be adjusted in fine increments and saved as a custom programme, ensuring that recurring cleaning cycles can be reproduced consistently at any time. Touchscreen operation with ten programme memories Instead of traditional rotary controls or individual buttons, a touchscreen handles all operation of the ST 514 BH. The ultrasonic power can be adjusted from 10 to 100 % in 1 % increments, the temperature from 20 to 80 °C in 1 K increments, and the timer accepts any value from 1 second to 8 hours in 1-second increments. Up to ten programmes can be saved in the unit using these settings and recalled at the touch of a finger. For example, one programme can be set up for intensive rough cleaning of heavily soiled workpieces and a second for the gentle cleaning of sensitive instruments; both can be recalled at any time without the need for further adjustment. An integrated ECO programme further reduces energy consumption when the bath does not need to be running at full capacity. Powerful ultrasound with DEGAS, Sweep, Pulse and Interval The ultrasonic generator operates at a frequency of 40 kHz with a nominal power of 215 W and a peak power of 860 W. The DEGAS function degasses freshly prepared cleaning fluid before the actual cleaning process, thereby preventing dissolved air bubbles from weakening the cavitation effect. The Sweep function continuously varies the frequency slightly to prevent standing waves in the tank and to achieve a uniform cleaning effect throughout the bath. Pulse and interval modes further adjust the cleaning intensity to suit items of varying sensitivity. Ultrasonic bath with heating: 600 W for constant bath temperatures Many cleaning agents only achieve their full effectiveness at elevated temperatures. The ST 514 BH’s 600 W heater covers a range from 20 to 80 °C, adjustable in 1 K increments, so that the bath temperature can be precisely matched to the cleaning concentrate being used. Drainage is via a G ½ left-hand ball valve, so that the bath can be emptied after cleaning without having to tip it or decant the contents. System bus interface for the DST 01 docking station The ST 514 BH can be connected to the DST 01 docking station via a system bus interface with an M12 connector (4-pin), allowing it to be integrated into networked cleaning processes in which several units are to be operated together. Robust stainless steel design for continuous use The tank and housing are made of 1.4301 stainless steel. The tank is 1.0 mm thick and has internal dimensions of 325 × 300 × 200 mm, with a total capacity of 18.7 litres and a working capacity of 12.5 litres. With external dimensions of 355 × 325 × 350 mm, measured excluding handles and ball valve, and a net weight of 10.3 kg, the unit can be accommodated on any laboratory bench or workbench. Degree of protection IP 32 and protection class I ensure safe operation in everyday use in laboratories, medical practices and workshops. Connection, warranty and delivery The unit is connected via a permanently fitted, 2-metre-long mains cable to a 230 V AC supply (±10 %, 50/60 Hz) with a current consumption of 3.6 A. Bandelin provides a 2-year warranty on the SONOREX smart ST 514 BH; packed ready for dispatch, the unit weighs 12.6 kg with packaging dimensions of 475 × 445 × 465 mm. Successor to the SONOREX DIGIPLUS DL 514 BH, compatible with existing accessories The ST 514 BH is the successor to the now-discontinued SONOREX DIGIPLUS DL 514 BH and features a comparable tank size and performance class. Anyone already using a lid, insert basket, insert tank, insert beaker or insert grid for a 514 model can continue to use these accessories directly on the new ST 514 BH; there is no need to switch to new accessory sizes. Compared to its predecessor, the ST 514 BH features a touchscreen control panel instead of individual buttons, finer power adjustment in 1 % increments rather than 10 %, a freely selectable timer instead of fixed time settings, ten programme memory slots and the system bus interface for the docking station. Typical applications The ST 514 BH is suitable wherever items to be cleaned require thorough yet gentle treatment and where cleaning parameters need to remain reproducible throughout the day: Sample preparation and cleaning of laboratory glassware, cuvettes and small parts in day-to-day laboratory work Pre-treatment of instruments in dental and medical practices prior to further sterilisation Precision cleaning of components, tools and machine parts in industry and workshops Technical details Inner tank dimensions (L×W×D)325 × 300 × 200 mm Tank materialStainless steel 1.4301, thickness 1.0 mm Total capacity18.7 l Working capacity12.5 l Ultrasonic frequency40 kHz Ultrasonic power215 W (nominal), 860 W (peak) Power setting10 to 100 %, in 1 % increments Heating power600 W Temperature range20 to 80 °C, in 1 K increments Timer1 s to 8 h, in 1-s increments Pulsation times1 to 60 s Programme memory10, including ECO programme FunctionsDEGAS, Sweep, Pulse, Interval OperationTouchscreen InterfaceM12 system bus, 4-pin, for DST 01 docking station DrainG ½ left-hand ball valve HousingStainless steel 1.4301 External dimensions (excluding handles/ball valve)355 × 325 × 350 mm Weight (net)10.3 kg Packaging dimensions475 × 445 × 465 mm Shipping weight (gross)12.6 kg Connection230 V~ (±10 %), 50/60 Hz, 3.6 A Mains cable2 m, permanently attached to the unit Degree of protectionIP 32 Protection classI Back-up batteryLithium button cell CR 2032, 3 V ClassificationClass I medical device (MDR 2017/745) ConformityLow Voltage Directive 2014/35/EU, EMC 2014/30/EU, RoHS 2011/65/EU Scope of delivery 1x Bandelin SONOREX smart ST 514 BH ultrasonic bath with heating, stainless steel tank with fixed 2-metre mains cable The lid, insert basket, insert tank, insert beaker, insert grid and the DST 01 docking station are not included in the scope of delivery and are available separately. Regulatory information The device contains a lithium backup battery (CR 2032 button cell, 3 V) for the programme memory. In accordance with the Battery Act, batteries must not be disposed of with household waste. You are legally obliged to return used batteries; this can be done free of charge at local authority collection points and at any shop where batteries of the relevant type are sold. Individual requirements & procurement service We are happy to assist you via our procurement service with lids, insert baskets, insert tanks, insert beakers, insert grids or the DST 01 docking station for the ST 514 BH, as well as with the individual procurement of spare parts or suitable cleaning concentrates.