Bandelin SONOREX GH 14 instrument holder for SUPER RK and DIGITEC DT
€126.40
% Manufacturer's RRP: €160.00 21% below manufacturer's RRP
- Stainless steel instrument holder
- For particularly large individual parts and larger laboratory flasks
- Larger cleaning volume compared with the basket
- Suitable for 5 SONOREX models of the SUPER RK and DIGITEC DT series
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "Bandelin SONOREX GH 14 instrument holder for SUPER RK and DIGITEC DT"
The GH 14 instrument holder is intended for particularly large individual parts in the SONOREX ultrasonic bath, such as larger laboratory flasks. Compared with the basket, it has more cleaning volume. It is made of stainless steel, and the basket brackets are partly covered with polyolefin heat-shrink tubing. According to Bandelin, the tubing protects the tank rim from damage and dampens noise. It is suitable for 5 models of the SONOREX SUPER RK and DIGITEC DT series.
Suitable for
| Model | Bandelin device no. |
|---|---|
| SONOREX SUPER RK 514 H | 207 |
| SONOREX SUPER RK 514 | 277 |
| SONOREX DIGITEC DT 514 H | 3211 |
| SONOREX DIGITEC DT 514 BH | 3216 |
| SONOREX DIGITEC DT 514 | 3250 |
Scope of delivery
- 1 SONOREX GH 14 stainless steel instrument holder
Fits
Ultrasonic bath with heating: SONOREX SUPER RK 514 H The Bandelin SONOREX SUPER RK 514 H is a high-performance ultrasonic cleaner with heating for professional use in laboratories, medical practices and workshops. With a capacity of 13.5 litres (working capacity 9.0 litres) and an ultrasonic frequency of 35 kHz, this ultrasonic bath ensures thorough, gentle cleaning of instruments, laboratory glassware and small parts. The integrated heater warms the cleaning bath to up to 80 °C, thereby helping to dissolve stubborn dirt, whilst the lowest setting of 30 °C allows for gentle cleaning of temperature-sensitive materials. The unit is classified as a Class I medical device; the suitability of the instruments depends on the instrument manufacturer’s specifications. Typical applications in everyday laboratory work include the cleaning of metal and glass instruments, the degassing of solvents prior to analytical procedures, and the reprocessing of laboratory glassware and small parts, which are freed from contamination even in hard-to-reach areas thanks to ultrasonic cavitation. The ultrasonic peak power of 860 W (rated power 215 W), combined with the 600 W heater, enables consistent, reproducible cleaning results even with daily use. The cleaning duration and bath temperature can be continuously adjusted using the rotary knob; the timer covers a range from 1 to 15 minutes and can also be set to continuous operation when longer cleaning cycles are required. This allows the unit to be flexibly adapted to different cleaning tasks, from short cycles for delicate small parts to longer cycles for heavily soiled laboratory glassware. Robust construction for continuous use The tank and housing of the SONOREX SUPER RK 514 H are made of 1.4301 stainless steel; the ultrasonic tank itself has a wall thickness of 1.0 mm, which gives the unit the necessary robustness for daily use in a laboratory setting. A fill-level mark inside the tank makes it easy to fill it correctly with cleaning fluid. For easy and clean emptying, the unit features a G 3/4 ball valve with a 50 cm long hose on the left-hand side, allowing the used bath to be drained directly into a collection vessel. Handles on the sides ensure safe transport, whilst the 2 m long mains cable, which is permanently attached to the unit, allows connection to a standard 230 V domestic socket. With an IP 32 protection rating, the housing is protected against foreign bodies larger than 2.5 mm and obliquely falling dripping water, which further simplifies handling in everyday laboratory use. Weighing 10.8 kg and with compact external dimensions of 355 x 325 x 305 mm, the ultrasonic bath can also be flexibly positioned at a fixed workstation in the laboratory or workshop. Technical details ModelSONOREX SUPER RK 514 H Capacity / Working volume13.5 l / 9.0 l Ultrasonic frequency35 kHz Ultrasonic powerPeak power 860 W, rated power 215 W Heating power600 W Temperature range30–80 °C Timer1–15 min (± 5 %), plus continuous operation Tank / housing materialStainless steel 1.4301 (tank wall thickness 1.0 mm) External dimensions (L x W x H)355 x 325 x 305 mm Internal dimensions of basin (L x W x D)325 x 300 x 150 mm Weight10.8 kg Degree of protection, housingIP 32 Packaging dimensions (L x W x H)475 x 445 x 380 mm Operating voltage / Conformity230 V~ (± 10 %), 50/60 Hz; Class I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 514 H ultrasonic bath with heating Mains cable (2 m, permanently attached to the unit) Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or cleaning and disinfection concentrates, a different model from the SONOREX range, or personalised advice on selecting the right ultrasonic bath for your application in a laboratory, practice or workshop? We support you with a personalised procurement service to help you put together the right laboratory equipment and will be happy to advise you on alternatives and complementary products from the Bandelin range. You can find full details at our procurement service. Simply get in touch with us and we’ll provide you with a suitable quote.
SONOREX SUPER RK 514: Ultrasonic bath for professional laboratory use The Bandelin SONOREX SUPER RK 514 is a high-performance ultrasonic bath with a total capacity of 13.5 litres and a working capacity of 9.0 litres, designed for daily use in laboratories, medical practices, clinics and workshops. With an ultrasonic frequency of 35 kHz and an effective rated power of 215 W (peak power 860 W), the unit generates intense cavitation bubbles that reliably remove contaminants whilst being gentle on materials, even in hard-to-reach areas such as cavities, threads or fine openings in instruments and small parts. Thanks to the combination of frequency and rated power, the bath is suitable for both more delicate cleaning tasks and more stubborn soiling, without placing excessive strain on the objects being cleaned. The tank and housing are made of 1.4301 stainless steel; the tank has a wall thickness of 1.0 mm. It is designed for high robustness and a long service life even with intensive use of aqueous cleaning or disinfectant solutions. The timer is conveniently operated via a rotary knob with a range of 1 to 15 minutes (tolerance ±5 %) and a continuous operation setting for longer cleaning cycles, allowing the treatment duration to be individually adjusted to different levels of soiling. For easy draining, the ultrasonic bath features a G 3/4 ball valve with a 50 cm long hose on the left-hand side of the unit, as well as a fill level mark for precise dosing of the cleaning solution. Handles on both sides facilitate handling and transport in everyday laboratory use, whilst the fixed 2 m long mains lead ensures flexible placement at the workstation. The operating voltage of 230 V~ (±10 %) at 50/60 Hz allows connection to standard laboratory power circuits. Typical applications for the ultrasonic bath The SONOREX SUPER RK 514 is suitable for a wide range of cleaning tasks in everyday laboratory work. These include the cleaning of instruments (suitability as specified by the instrument manufacturer), the degassing of solvents prior to analytical applications, and the cleaning of laboratory glassware, pipettes, electrodes and other small parts to remove residues, deposits or contaminants. Thanks to its continuously adjustable timer and robust stainless-steel tank, the ultrasonic bath can be flexibly integrated into various cleaning processes, both for one-off use as part of individual work steps and for recurring routine tasks in reprocessing units. The housing’s IP 32 protection rating and its classification as a Class I medical device in accordance with Regulation (EU) 2017/745 make the device a reliable fixture in professional environments; it also meets the requirements of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU and the RoHS Directive 2011/65/EU. Technical details Capacity / Working capacity13.5 l / 9.0 l Ultrasonic frequency35 kHz Ultrasonic peak power860 W Nominal ultrasonic power (effective)215 W Time control1–15 min (±5 %) and continuous operation, operated via a rotary knob Material of ultrasonic bathStainless steel 1.4301, wall thickness 1.0 mm Housing materialStainless steel 1.4301 External dimensions (L x W x H)355 x 325 x 305 mm Internal dimensions (L x W x D)325 x 300 x 150 mm Weight10.5 kg Degree of protection (housing)IP 32 Operating voltage230 V~ (±10 %), 50/60 Hz Mains cable2 m, permanently attached to the unit DrainG 3/4 ball valve with 50 cm hose ConformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x SONOREX SUPER RK 514 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories for your ultrasonic bath, such as hanging baskets, insert grids, a device holder or suitable cleaning and disinfection concentrates, or do you have specific requirements regarding procurement, delivery times or special terms? Our procurement service provides personalised support in selecting the right accessories and with any special procurement requests relating to your laboratory equipment, guiding you through the process from assessing your requirements right through to delivery.
The Bandelin SONOREX DIGITEC DT 514 H heats up to an adjustable temperature of 20 to 80 °C with 600 watts and achieves a peak ultrasonic power of 860 watts. The tank measures 325 x 300 x 150 mm internally and has a capacity of 13.5 l.Heating, setpoint and actual valueThe temperature is set using the buttons; the display shows the setpoint and actual values for the bath temperature. Protection against delayed boiling and dry-run protection for the heater are built in. Compared to the DT 510 H (400 watts), the heating power is 50 % higher; accordingly, the current consumption is 3.6 A at 230 V, whilst for the unheated DT 514 it is 1.0 A.Ultrasonic and time controlFour vibration systems deliver a peak power of 860 watts and a rated power of 215 watts at 35 kHz. SweepTec automatically prevents standing waves in the acoustic field; this is complemented by a pulse function and DEGAS degassing. The timer covers 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %); there is also a continuous operation mode and the unit switches off 12 hours after the last button press.Tank, drain and baseThe tank and housing are made of 1.4301 stainless steel; the tank is 1.0 mm thick. The working capacity of 9.0 l can be read from the fill level mark. A G 1/2 left-hand ball valve is provided for draining; a hose connector and hose are included. The bath measures 355 x 325 x 305 mm externally, weighs 9.0 kg and has side handles. The power cable is 2 m long; the degree of protection is IP 33.Which depth is suitable?If you have items to clean that are taller, compare the tank depth: 150 mm for the DT 514 H, 200 mm for the DT 514 BH, which consequently has a capacity of 18.7 l. The heating power is also 600 watts for both models.AccessoriesSuitable accessories include the K 14 insert basket (275 x 245 x 50 mm, up to 10 kg), the GH 14 apparatus holder, the D 514 lid, the DE 514 perforated lid for four insert beakers, the KAH 14.3 cassette holder for DIN cassettes, the SM 14 silicone studded mat and the KW 14 hanging tray. Clamps EK 10 to EK 250 hold laboratory flasks with a diameter of up to 85 mm.Typical applicationsCleaning of items of various shapes, types and sizes in laboratories, medical practices and workshops using a temperature-controlled bathRapid degassing of liquidsHomogenisation and emulsificationSonochemical applications, such as radical generation or improved mass transferSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat bath temperature can be set?20 to 80 °C with a heating power of 600 watts.Does the tank differ from that of the DT 514? No, the tank is identical (325 x 300 x 150 mm). The difference lies in the heating system and the protection against delayed boiling.Where is the drain?On the left-hand side, as a G 1/2 ball valve.Are there other plug types available?Yes. Bandelin offers GB, CH and US variants under separate order numbers, such as 3211-GB. The 3211 model is available with a CEE 7/7 EU plug.Technical detailsTotal capacity / Working capacity13.5 l / 9.0 lInternal dimensions of tank (L x W x D)325 x 300 x 150 mmExternal dimensions (L x W x H)355 x 325 x 305 mm (excluding handles and ball valve, including feet)Weight (net / gross)9.0 kg / 10.9 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating600 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 H ultrasonic bath with heaterMains cable (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert beakers, and they are available separately.Individual requirements and procurement serviceFor accessories such as basket K 14, cassette holders or lid D 514, and for other heated models, individual procurement is required. You can request a quote via our procurement service.
The Bandelin SONOREX DIGITEC DT 514 BH has a tank 200 mm deep. Its internal dimensions are 325 x 300 x 200 mm and it has a capacity of 18.7 l, of which 12.5 l is working capacity. It is fitted with a heating element, push-button controls and a drain.200 millimetres deep instead of 150The base area is the same as that of the DT 514 H, but the tank is 50 mm deeper. This increases the total capacity from 13.5 to 18.7 l and the working capacity from 9.0 to 12.5 l. With external dimensions of 355 x 325 x 385 mm, the unit is correspondingly taller and weighs 9.7 kg. The tank (1.0 mm) and housing are made of 1.4301 stainless steel.Heating and safety featuresThe 600-watt heating element is adjustable from 20 to 80 °C; the setpoint and actual temperature are shown on the display. For protection, the heater has built-in delayed-boiling protection and dry-run protection. The DT 514 operates without a heater but with the 150 mm deep tank.Ultrasound and timerFour vibration systems generate a peak power of 860 watts at 35 kHz (215 watts rated power). SweepTec automatically prevents standing waves in the ultrasonic field; there is also a pulse function and DEGAS rapid degassing. The time can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %) or to continuous operation. The unit switches off after twelve hours if no button is pressed.Operation and connectionThe water drains via the G 1/2 ball valve on the left-hand side; a hose connector and hose for installation are included. The mains cable is 2 m long and permanently attached. The current consumption is 3.6 A at 230 V; the protection rating is IP 33; the permissible ambient temperature ranges from 5 to 40 °C.Baskets and holdersFor this tank, Bandelin offers the K 14 B insert basket (275 x 245 x 50 mm, up to 10 kg) and the K 14 AZ basket (285 x 260 x 155 mm, mesh size 12.5 x 12.5 mm), which is designed to hold one full-view mask, two full-face masks or four half-masks. Also available are the GH 14 apparatus holder, the D 514 lid, the DE 514 perforated lid for four insert beakers and the KW 14 B hanging tray (275 x 210 x 195 mm).Typical applicationsUltrasonic cleaning of objects of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of taller items thanks to a tank depth of 200 mmRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsHow deep is the tank?200 mm, with a base area of 325 x 300 mm.What temperature range is available?20 to 80 °C with a heating power of 600 watts.How much liquid does it hold?The working capacity is 12.5 l; the total capacity is 18.7 l.What mains voltage is the 3216 model designed for?230 V with a CEE 7/7 EU plug. Bandelin supplies versions with UK, Swiss and US plugs under the order numbers 3216-GB, 3216-CH and 3216-1.Technical detailsTotal capacity / Working capacity18.7 l / 12.5 lInternal dimensions of the tank (L x W x D)325 x 300 x 200 mmExternal dimensions (L x W x H)355 x 325 x 385 mm (excluding handles and ball valve, including feet)Weight (net / gross)9.7 kg / 11.8 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, rated power 215 W, 4 vibration systemsHeating600 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heating element, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 3.6 A / 115 V 7.1 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 465 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 BH ultrasonic bath with heaterMains cable (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainThe scope of delivery does not include baskets, lids, holders and insert beakers, and they are available separately.Individual requirements and procurement serviceThe K 14 B or K 14 AZ baskets, the D 514 lid or the KW 14 B hanging tray require individual procurement. You can request a quote via our procurement service.
The tank of the Bandelin SONOREX DIGITEC DT 514 is almost square, with a base measuring 325 x 300 mm, and has a capacity of 13.5 l at a depth of 150 mm. The bath has four vibration systems, push-button controls and a ball valve drain. This model does not feature a built-in heater.Larger surface area compared to the DT 510The DT 510 has a significantly smaller base area of 300 x 240 mm, whilst the depth of 150 mm is identical. The DT 514 has a working capacity of 9.0 l; the fill-level marker helps with filling. The unit measures 355 x 325 x 305 mm externally and weighs 8.7 kg; side handles make it easier to carry.860 watts peak powerFour vibration systems achieve a peak power of 860 watts at 35 kHz; the nominal power is 215 watts. The SweepTec function automatically prevents standing waves in the ultrasonic field; a pulse function and DEGAS degassing are also included. DEGAS is activated at the start of the cleaning process.Timer, shut-off and drainThe cleaning duration can be set using the buttons to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %); alternatively, the bath runs in continuous operation. The display shows the remaining time; the unit switches off automatically twelve hours after the last button press. The G 1/2 ball valve on the left-hand side drains the tank; a hose connector and hose are included.With or without heatingThe DT 514 H features the same tank and additionally offers 600 watts of heating power for temperatures ranging from 20 to 80 °C. If you need even more depth, you can opt for the DT 514 BH with a tank depth of 200 mm and a capacity of 18.7 l, which is also heated. The DT 514 is suitable if the bath liquid does not need to be heated.Accessories for the large tankBandelin offers the following accessories for the DT 514: the K 14 insert basket (275 x 245 x 50 mm, up to 10 kg), the GH 14 apparatus holder, the D 514 lid and the DE 514 perforated lid for four insert beakers. The KAH 14.3 cassette holder (305 x 205 x 135 mm) holds three 1/1 DIN cassettes, six 1/2 DIN cassettes or twelve 1/4 DIN cassettes and can carry up to 5 kg. The SM 14 silicone studded mat and the KW 14 polypropylene hanging tray with PVC lid (280 x 215 x 145 mm) complete the range.Typical applicationsUltrasonic cleaning of items of various shapes, types and sizes in laboratories, medical practices and workshopsCleaning of multiple items simultaneously in an insert basketRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments classified as Class I medical devices; the suitability of the instruments is determined by the instrument manufacturer’s specificationsFrequently asked questionsWhat is the working capacity?9.0 l out of a total capacity of 13.5 l.Does the DT 514 have a heating function?No. Heated versions are the DT 514 H and the DT 514 BH.How many DIN cassettes does the KAH 14.3 cassette holder hold?Three 1/1 cassettes, six 1/2 cassettes or twelve 1/4 cassettes. The holder is not included in the scope of delivery.What mains voltage does the unit require?The 3250 model on offer operates at 230 V~ (± 10 %), 50/60 Hz. For 115 V, Bandelin offers the 3250-1 model. The current consumption is 1.0 A at 230 V.Technical detailsTotal capacity / Working capacity13.5 l / 9.0 lInternal dimensions of the tank (L x W x D)325 x 300 x 150 mmExternal dimensions (L x W x H)355 x 325 x 305 mm (excluding handles and ball valve, including feet)Weight (net / gross)8.7 kg / 10.6 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 860 W, nominal power 215 W, 4 vibration systemsTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 1.0 mmHousing materialStainless steel 1.4301DrainBall valve G 1/2, left-hand sideHandleson the sideMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 1.0 A / 115 V 1.9 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions475 x 445 x 380 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 514 ultrasonic bathMains lead (2 m, permanently attached to the unit)Ball valve, hose connector and hose for fitting to the drainBaskets, lids, holders and insert beakers are not included in the scope of delivery, and are available separately.Individual requirements and procurement serviceThe K 14 insert basket, the KAH 14.3 cassette holder, the D 514 lid or a heated version are available on an individual procurement basis. You can request a quote via our procurement service.