IKA Bridge Thermostat, IC basic, 0003861000

IC basic
The IC basic immersion thermostat features a retractable bath bridge and is designed for temperature control of liquids in open or semi-open bath vessels up to a temperature of 250 °C. The integrated pressure and suction pump enables its use for both internal and external applications. Optionally, a cooling coil can be connected to the unit for temperature control at or near ambient temperature. All IKA thermostats comply with the highest safety classification III (FL) for use with flammable liquids in accordance with DIN 12876. The IC basic immersion thermostats offer fast heating times and stable temperature conditions. With the integrated M16x1 connections, the unit can also be used for external applications.
Temperature range: RT – 250 °C
Temperature stability: ± 0.02 K
Extendable stainless steel bath bridge, allowing the thermostat to
be suspended in bath vessels of various sizes Integrated powerful and adjustable pressure/suction pump
Large LED display shows measured values, temperature setting, pump speed and safety temperature
Intuitive menu navigation via push buttons and rotary knobs
Adjustable safety circuit
Socket for connecting an external PT 100 temperature sensor
Visual and audible warning functions
USB / RS 232 interface for controlling and monitoring the units via labworldsoft® and for online updating of the unit software

Technical data
Device type Immersion
thermostat Class designation according to DIN 12876 III
Marking according to DIN 12876 FL
Heating power 2500 W
Operating temperature Room temperature +10K @1000rpm – 250 °C
Minimum operating temperature (with external cooling) –20 °C
Temperature display: yes
Temperature control: PID
Operating temperature sensor: PT 100
Safety temperature sensor: PT 1000
Operating temperature display: LED
Safety temperature display: LED
Temperature stability: DIN 12876 ±0.02 K
Connection for external temperature sensor PT 100
Display resolution 0.1 K
Display of operation with external sensor: yes
Setpoint accuracy: ±0.1 K
Visual warning function: yes
Audible warning function: yes
Overtemperature warning function: yes
Safety circuit: adjustable 0–260 °C
Low-level protection: yes
High-level protection: yes
Pump type: pressure/suction pump
Adjustable pump output: yes
Maximum pump pressure (0 litres flow rate) 0.61 bar
Pump pressure (suction side), max. (0 litres flow rate) 0.45 bar
Flow rate, max. (0 bar back pressure) 31 l/min
Pump connections M16x1
Bath depth, min. 150 mm
Calibration option yes
Device mounting: bridge
; clamping range of universal clamp 280–375 mm
Technical data in accordance with DIN 12876
Permissible duty cycle 100 %
Dimensions (W x H x D) 285 x 313 x 291 mm
Weight 10 kg
Permissible ambient temperature range 5 – 40 °C
Permissible relative humidity 80 %
Protection class in accordance with DIN EN 60529 IP 21
RS 232 interface yes
USB interface yes
Voltage 230 V
Frequency 50/60 Hz
Power consumption 2650 W

Accessories and spare parts available on request