Laboratory furniture
Labormöbel und Laborstühle sorgen für ergonomisches, sicheres Arbeiten im Labor. LT Laborhandel führt aktuell Bimos-Laborstühle für Labor, Reinraum und ESD-Umgebung – von Gleiter- über Rollen- bis zu Sattelstuhl-Ausführungen. Das Sortiment wird laufend um weitere Labormöbel erweitert. Unser Serviceteam berät Sie gerne zur passenden Sitzlösung.
Bimos Laboratory Saddle Chair 2 (seat height 540–800 mm, faux leather), 9473L-MG01
The Bimos Laboratory Saddle Stool, also sold as a saddle chair, is designed for elevated workstations with frequently changing, short sitting phases, as found in laboratory and medical settings, particularly where mobility is required or leg room stays limited. The saddle shape aligns the pelvis and supports an upright sitting posture. 3D seating dynamics for active sitting The saddle shape allows active, dynamic sitting with variable seating positions, which bimos calls 3D seating dynamics. Seat height adjusts steplessly from 540 to 800 mm, via a release button at the front edge of the saddle seat, reachable from every sitting position. Anyone switching between a laboratory table and an elevated workbench can adjust the height directly at the workstation without tools, without getting off the stool. Synthetic leather in six colours The saddle stool is upholstered in synthetic leather, washable, easy to care for and resistant to commercially available disinfectants. Damage from sharp-edged objects cannot be ruled out. Six colours are available: black, blue, grey, light beige, mint and apricot. This covers both neutral laboratory environments and colour coding by department or work area, for example when several teams share the same room with different stools. Hygienic design and mobility The upholstery is free of folds and seams, the mechanism is enclosed, which makes it harder for germs and bacteria to settle and eases cleaning between two work steps. Load-dependent braked soft castors for hard floors come as standard, together with an extra-small aluminium star base that keeps the stool mobile without getting in the way or taking up much floor space. This combination of easy cleaning and mobility is typical of bimos laboratory and medical stool systems, where short, frequent sitting scenarios and strict hygiene requirements come together. Standard and warranty The saddle stool is built to DIN 68877. According to the manufacturer, bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge, labour and call-out are then charged, and wear parts such as upholstery and castors are excluded from the fourth year. The conditions apply to deliveries within Germany. Typical applications Short-term workstations with frequent changes between sitting and standing Microscopy and pipetting workstations in the laboratory Medical and nursing tasks with changing sitting positions Workstations with elevated hygiene requirements Inspection and test stations in workshops and industry, where mobility between several stations matters and room for a standing leg stays limited Technical details StandardDIN 68877Seat height540 to 800 mm, steplessly via release buttonSeat width350 mmSeat depth415 mmStar base diameter540 mmMaterialSynthetic leather MagicColoursBlack, blue, grey, light beige, mint, apricotCastorsload-dependent braked soft castors for hard floorsNet weight8.5 kgGross weight (shipping)10 kgShipping carton (L x W x H)634 x 534 x 277 mmCondition on deliverypartly disassembled in a cartonManufacturer's warranty3-year full warranty from delivery, then spare parts up to year 10 (labour charged) Contents Bimos laboratory saddle stool in the selected colour Aluminium star base with castors Delivered partly disassembled in a carton Individual requirements and procurement service For special colours, larger quantities or spare parts such as castor sets, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.
Bimos TEXON 2 laboratory chair, with castors, 9173-6801
The Bimos TEXON is a task chair for laboratory workstations with frequent changes of position, and for workbenches and test stations in industry. Auto-Motion technology follows every movement, the anthracite aluminium star base carries the chair as standard, and depending on the version and upholstery, the TEXON adapts to a lab bench, production line or workbench. Auto-Motion technology and Flex-Back for dynamic sitting The Auto-Motion mechanism can be locked in three positions and automatically adjusts the weight regulation, with no need to readjust the chair. The Flex-Back under the lower backrest increases the range of movement to the rear. Anyone sharing the chair between several people in shift work manages without tools and without a long adjustment time. Interchangeable upholstery and smooth surfaces Seat and backrest upholstery can be changed with one click, without tools. The seamless design and closed surfaces make cleaning straightforward, which matters at laboratory workstations with cleaning regulations and in production areas exposed to dust and splashes. Choosing upholstery to suit the application The TEXON is available in four upholstery materials, each with its own focus. Synthetic leather Magic is PVC-free, easy to clean and resistant to commercially available disinfectants, which makes it an obvious choice for laboratory workstations with hygiene requirements. Skintec combines seating comfort with easy cleaning and robustness, is likewise resistant to disinfectants and, according to the manufacturer, is produced in a particularly sustainable way, making it a second good choice for laboratories. Supertec is designed for production environments: its micro-armour coating resists cuts and slipping while remaining breathable, which suits workbenches and manufacturing workstations in industry. Fabric Duotec is suited to clean environments, is breathable and can be cared for with commercially available upholstery cleaners. Synthetic leather Magic and Fabric Duotec are available in black and grey, Skintec additionally in off-white, and Supertec in black and grey. Four versions for different working heights The basic models differ in seat height and floor contact. Low with glides or with castors covers seat heights from 450 to 620 mm, the range for lab benches and workbenches at standard height. High with glides and foot ring or with seat-stop castors and foot ring runs from 570 to 810 mm and is intended for elevated workstations, for example on production lines or test benches at standing-desk height. At these seat heights, the foot ring gives the feet the necessary support. Anyone who needs castors at an elevated workstation chooses the version with seat-stop castors. One basic model for laboratory and industry At the lab bench, cleaning between two samples matters most, at the workbench it is the seat height relative to the machine and the stability of the castors. The TEXON covers both with the same mechanism and differs only in version and upholstery. Anyone who wants to use the chair in both the laboratory and the adjoining production area can choose version and upholstery separately for each workstation, without having to switch to a different model. Standard, safety and warranty The TEXON is built to DIN 68877 and carries the GS mark for tested safety. The castor versions come with load-dependent braked soft castors for hard floors as standard. According to the manufacturer, bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge, labour and call-out are then charged, and wear parts such as upholstery and castors are excluded from the fourth year. The conditions apply to deliveries within Germany. Typical applications Sample preparation and microscopy workstations in the laboratory Quality assurance and test stations with frequent sit-stand changes Workbenches in production and assembly Inspection and packaging stations at elevated working height Shift work with several users on the same chair Technical details StandardDIN 68877, GS mark for tested safety Standard equipmentAuto-Motion technology, anthracite aluminium star base Seat height, low (glides or castors)450 to 620 mm Seat height, high with foot ring (glides or seat-stop castors)570 to 810 mm Seat width475 mm Seat depth460 mm Backrest height570 mm Star base diameter700 mm Net weight15.5 to 19.5 kg, depending on version Gross weight (shipping)18 to 22 kg, depending on version Shipping carton (L x W x H)800 x 400 x 650 mm Castorson the castor versions, load-dependent braked soft castors for hard floors Condition on deliverypartly disassembled in a carton, optionally assembled in a protective cover Manufacturer's warranty3-year full warranty from delivery, then spare parts up to year 10 (labour charged) Contents Bimos TEXON task chair in the selected version, upholstery material and colour Anthracite aluminium star base On the high versions: foot ring Delivered partly disassembled in a carton 4D armrests are not included, nor is the foot ring on the low versions. Both can be ordered separately as accessories if required. Some variant product images show the chair with armrests fitted; these are not part of the scope of delivery. Individual requirements and procurement service For special colours, larger quantities or spare parts such as castor sets, armrests or foot rings, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.
Bimos NEON 1 laboratory chair, with glides, 9560-9999-278
The Bimos NEON chair element is the base of the NEON system for industry and laboratory. It is delivered without seat and back upholstery, the matching upholstery element is available as a separate product. Anyone who equips several workstations with the same base model can combine one chair element with different upholstery elements, instead of buying a complete new chair for every colour. Delivered without upholstery, choose the upholstery element separately Seat and backrest arrive on the chair element without a cover. Every upholstery element from the NEON range fits the chair element, in Fabric Duotec, Synthetic leather Magic, Skintec or Supertec, each in black, blue or grey. The upholstery element is ordered separately and can later be swapped independently of the chair element. Permanent-contact backrest or synchronous mechanism The chair element is available with either a permanent-contact backrest or a synchronous mechanism. With the permanent-contact backrest, only the backrest moves when leaning back, with the synchronous mechanism, seat and backrest move in a fixed ratio to each other. Both mechanism variants share the same ergonomic package: weight regulation, seat depth adjustment, seat tilt adjustment and backrest height adjustment. Three versions for different working heights Bimos offers the chair element in three versions, referred to internally by the manufacturer as NEON 1, NEON 2 and NEON 3. Low with glides or with castors covers a seat height of 450 to 620 mm, the range for workbenches and laboratory tables at standard height. High with glides and step-up aid runs from 560 to 820 mm and is intended for elevated workstations, for example at standing desks or test tables. The star base is made of aluminium, fitted with glides or castors depending on the version, and the chair is delivered partly disassembled in a carton. Anyone switching between a fixed laboratory table and an elevated workbench chooses the matching version for each workstation, without having to change the mechanism or the upholstery. Flexband as a colour accent The Flexband is the impact-resistant edging made of soft plastic and is available in blue, grey, orange or green, independent of the chosen upholstery colour. This allows workstations, shifts or departments to be distinguished by colour, without needing a different upholstery for it. Standard and castors The NEON chair element is built to DIN 68877 and, as a bimos work swivel chair, carries the GS mark for tested safety. The castor versions come with load-dependent braked soft castors for hard floors as standard. According to the manufacturer, bimos grants a 3-year full warranty from delivery. From the fourth to the tenth year, bimos supplies spare parts free of charge, labour and call-out are then charged, and wear parts such as upholstery and castors are excluded from the fourth year. The conditions apply to deliveries within Germany. Matching accessory The multifunction armrest for NEON fits the chair element, adjustable in height, width and depth with a pivoting arm pad. It is not part of the standard equipment and is ordered separately. Typical applications Changing workstations in manufacturing and assembly with several users per shift Inspection and test stations with frequent sit-stand changes Laboratory workstations with requirements for wipeable surfaces Workbenches and standing desks at elevated working height Companies using colour coding by department or shift Technical details StandardDIN 68877, GS mark for tested safetyMechanismPermanent-contact backrest or synchronous mechanismErgonomic packageWeight regulation, seat depth adjustment, seat tilt adjustment, backrest height adjustmentSeat height, low (glides or castors)450 to 620 mmSeat height, high with step-up aid (glides)560 to 820 mmSeat width470 mmSeat depth420 to 480 mmBackrest height570 mmStar baseAluminium, diameter 700 mm, with glides or castors depending on versionFlexband coloursBlue, grey, orange, greenNet weight18 to 21 kg, depending on versionGross weight (shipping)20 to 23 kg, depending on versionCondition on deliverypartly disassembled in a cartonManufacturer's warranty3-year full warranty from delivery, then spare parts up to year 10 (labour charged) Contents Bimos NEON chair element in the selected version, mechanism and Flexband colour Aluminium star base with glides or castors, depending on version On the high version: step-up aid Delivered partly disassembled in a carton Seat and backrest upholstery and armrests are not included. The matching upholstery element and the multifunction armrest for NEON are available separately. Individual requirements and procurement service For special colours, larger quantities or spare parts, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.
Bimos NEON Upholstery Element, Synthetic leather Magic black, 9588-MG01
The Bimos NEON upholstery element is the seat and back cover for the NEON chair element, which is delivered without upholstery. Fits all NEON chair elements The upholstery element fits every version of the NEON chair element: low with glides (9560, 9570), low with castors (9563, 9573) and high with glides and step-up aid (9561, 9571), regardless of the chosen mechanism, permanent-contact backrest or synchronous mechanism. Anyone who already has a chair element in use and only wants to change the cover or reorder a replacement upholstery does not need a new base model for that. This is the core of the bimos modular principle: one chair element, several interchangeable upholstery covers. Four materials, three colours The upholstery element is available in four materials, each in black, blue or grey. Fabric Duotec is breathable, absorbs and releases moisture, and can be cared for with commercially available upholstery cleaners, which suits clean working environments. Synthetic leather Magic is washable, easy to care for and resistant to commercially available disinfectants, though damage from sharp-edged objects cannot be ruled out. Skintec combines, according to the manufacturer, seating comfort with easy cleaning and robustness, is likewise resistant to disinfectants and, according to bimos, is produced in a particularly sustainable way. Supertec has a textile base layer with an applied micro-armour coating, is cut- and slip-resistant while remaining breathable, and is intended for production environments with higher mechanical loads. For laboratory workstations with disinfection requirements, Synthetic leather Magic and Skintec are the obvious choice, for production environments with mechanical loads Supertec tends to be preferred, and for clean office and test areas Fabric Duotec. Technical details MaterialFabric Duotec, Synthetic leather Magic, Skintec or SupertecColoursBlack, blue, greyFitsNEON chair element 9560, 9563, 9561, 9570, 9573, 9571Net weight3 kgGross weight (shipping)4 kgPackaging dimensions (L x W x H)490 x 650 x 160 mm Contents Bimos NEON upholstery element in the selected material and colour Seat and backrest upholstery as a set The NEON chair element is not included and is available separately. Individual requirements and procurement service For different colours or larger quantities, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.
Bimos Multifunction Armrest for NEON Laboratory Chair, 9589-217
The Bimos multifunction armrest is intended for the NEON chair element and adjusts in height, width and depth, the arm pad additionally pivots. Compatibility The armrest fits all versions of the NEON chair element: low with glides (9560, 9570), low with castors (9563, 9573) and high with glides and step-up aid (9561, 9571), regardless of mechanism and upholstery colour. It is not part of the standard equipment of the chair element and is fitted separately. Anyone sitting at the same NEON workstation for longer periods, for example at a screen or under a microscope, can relieve the shoulders and forearms with the armrest. Technical details Adjustmentheight, width and depth adjustable, arm pad pivotsFitsNEON chair element 9560, 9563, 9561, 9570, 9573, 9571Order unitpairNet weight2.5 kgGross weight (shipping)3.5 kgPackaging dimensions (L x W x H)330 x 250 x 350 mm Contents Bimos multifunction armrest for NEON, 1 pair Individual requirements and procurement service For spare parts or larger quantities, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.
Bimos 4D Armrests for TEXON Task Chair, 9179
The Bimos 4D armrests are intended for the TEXON task chair and adjust in height, width and depth, the arm pad additionally pivots. Compatibility The 4D armrests fit all four versions of the TEXON: low with glides, low with castors, high with glides and foot ring, and high with seat-stop castors and foot ring, regardless of upholstery material and colour. They are not included in the scope of delivery of the TEXON and are fitted separately. Anyone sitting at the same TEXON workstation for longer periods, for example at the workbench or the test table, can relieve the shoulders and forearms with the armrests. Technical details Adjustmentheight, width and depth adjustable, arm pad pivotsFitsBimos TEXON, all 4 versionsNet weight3 kgGross weight (shipping)5.5 kgPackaging dimensions (L x W x H)320 x 240 x 350 mm Contents Bimos 4D armrests for TEXON Individual requirements and procurement service For spare parts or larger quantities, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.
Bimos Foot Ring for TEXON Task Chair, 9178
The Bimos foot ring is intended for the TEXON task chair and gives the feet the necessary support at an elevated seat height, when the floor is no longer within reach. It is height-adjustable. Standard on the high versions On the high TEXON versions with seat heights from 570 to 810 mm (high with glides, high with seat-stop castors), the foot ring is part of the standard equipment. As a single part, it is suitable as a replacement. Whether it can be retrofitted to the low versions is clarified by our procurement service with bimos before ordering. Technical details Versionheight-adjustableFitsBimos TEXONStandard onTEXON high with glides, TEXON high with seat-stop castorsNet weight3 kgGross weight (shipping)5.5 kgPackaging dimensions (L x W x H)510 x 510 x 100 mm Contents Bimos foot ring for TEXON Individual requirements and procurement service For spare parts or larger quantities, our procurement service is on hand to help. It clarifies availability and lead time directly with the manufacturer.