IKA RET basic ETS-D7 Solution magnetic stirrer complete package, stainless steel base, 0010016577
€1,276.50
% Manufacturer's RRP: €1,702.00 25% below manufacturer's RRP
- Professional IKA magnetic stirrer complete set RET basic, including an ETS-D7 contact thermometer
- Highly conductive 135 mm stainless steel base ensures short heating times and mechanical robustness
- Direct temperature control within the medium via PID control reduces overshoot of the target temperature
- IP 42 housing protects the drive and electronics from dripping water
- Operational safety thanks to an independently adjustable safety circuit and a visual residual heat indicator
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "IKA RET basic ETS-D7 Solution magnetic stirrer complete package, stainless steel base, 0010016577"
The IKA RET basic ETS-D7 Solution Complete Package (MPN 0010016577) is a mechatronic system solution for the simultaneous stirring, mixing and high-precision temperature control of liquid media in the laboratory. This turnkey combination set combines the RET basic safety heating magnetic stirrer with the intelligent, electronic contact thermometer ETS-D7 and the matching stand accessories. Whether for demanding chemical syntheses, temperature-critical reactions in pharmaceutical research or intensive routine applications in industrial process engineering, precise temperature monitoring directly within the sample medium is the primary criterion for working in a manner that is gentle on materials and reproducible.
Excellent thermal conductivity thanks to a pure stainless steel base
A key material-specific feature of the RET basic is its high-performance base plate, with a diameter of 135 mm, which is manufactured from a specialised, high-purity stainless steel alloy. Compared to conventionally coated surfaces, the uncoated stainless steel plate offers exceptionally high thermal conductivity, resulting in extremely short heating cycles and highly efficient heat transfer into the sample. The surface is also characterised by outstanding mechanical impact resistance, scratch resistance and excellent resistance to a wide range of aggressive solvents. Its geometry is tailored to standardised laboratory vessels, can be cleaned without leaving any residue and ensures gentle, continuous use over many years.
Media temperature control via the ETS-D7 contact thermometer
A key process engineering feature of this system solution is the direct thermodynamic coupling via the ETS-D7 electronic contact thermometer included in the package. The connected temperature sensor is positioned stably within the liquid core of the sample using the sturdy stand system and regulates the heating power via a highly efficient PID microprocessor. The system thus reduces overshoot of the target temperature. Via the ETS-D7’s intuitive, high-resolution graphic display, laboratory staff can keep a constant eye on all relevant parameters as well as the temperature curve. Integrated safety functions also allow a maximum cut-off temperature to be set for unattended operation.
Housing and laboratory safety
The unit has a die-cast aluminium housing. The housing complies with degree of protection IP 42 and protects the internal electronic control elements and the magnetic drive against solid foreign objects larger than 1 mm and obliquely falling drops of water. A comprehensive safety concept protects users and the laboratory infrastructure: an independently adjustable safety circuit immediately switches off the heating function in the event of an unexpected overheating, whilst a visual residual heat indicator (Hot Top Indicator) warns staff of the risk of burns even after the unit has been switched off.
Technical details
Drive & stirring specifications (RET basic)
- Number of stirring points: 1
- Maximum stirring volume (based on water): 20 litres
- Speed range: 50 to 1,700 revolutions per minute (rpm)
- Speed control: Continuously variable via analogue rotary control with digital LED display
- Motor principle: Electronically commutated motor for maximum torque stability during sudden changes in viscosity
- Magnetic coupling: High holding force for secure guidance of large magnetic stir bars
Thermodynamics & heating power
- Heating power: 600 watts (for excellent heating kinetics)
- Heating plate temperature: Room temperature to 340 °C
- Heating plate setting accuracy: +/- 1 K
- Heating plate diameter: 135 mm
- Base material: High-quality, uncoated stainless steel alloy
- Adjustable safety circuit (min./max.): 50 to 380 °C
Specifications for the ETS-D7 contact thermometer
- Measurement and control range: -50 to +450 °C
- Control accuracy with integrated Pt1000 sensor: +/- 0.1 K
- Display: High-resolution graphic display for intuitive menu navigation
- Safety functions: Adjustable safety cut-off temperature, sensor break detection
Design, geometry & degree of protection
- Housing material: Robust die-cast aluminium housing, powder-coated for chemical resistance
- Degree of protection according to DIN EN 60529: IP 42
- Dimensions (W x D x H): 160 x 270 x 85 mm
- Mains connection: 220–230 V / 50/60 Hz
Scope of delivery
- 1 x IKA RET basic magnetic stirrer with heating (stainless steel plate)
- 1 x IKA ETS-D7 electronic contact thermometer
- 1 x Pt1000 temperature probe (stainless steel version)
- 1 x support rod for precise probe guidance
- 1 x cross-shaped sleeve for secure probe locking
- 1 x mains cable
- 1 x Detailed operating instructions
Regulatory information
This device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.
Individual requirements & accessories
To ensure you get the most out of the IKA RET basic ETS-D7 Solution complete package, we offer a comprehensive range of compatible system accessories. For safe, oil-free operation with round-bottom flasks, we recommend the heat-efficient IKA Dry attachments made from anodised aluminium, which can replace traditional oil baths. To protect the stirrer housing from stubborn contamination, we offer precisely fitting silicone protective covers. For complex mixing requirements, we also offer a wide range of PTFE-coated magnetic stir bars in various geometries (e.g. cylindrical, triangular or oval for round-bottom flasks). For data logging and process control, the system can also be linked to the labworldsoft laboratory software via the integrated interface. Please make use of our technical procurement service to ensure your measuring station is designed to meet your specific requirements. The IKA manufacturer’s warranty applies to the RET basic in the complete package: 2 years, extended to 10 years upon registration at ika.com/register within 90 days of purchase.
| Certification marks: | NRTL (TÜV SÜD, USA/Canada) |
|---|