Skip to main content Skip to search Skip to main navigation

IKA S 18 D - 14 G - KS disposable dispersing tool (12 pieces), plastic, Ø 14 mm, 0003452300

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 18 D - 14 G - KS disposable dispersing tool (12 pieces), plastic, Ø 14 mm, 0003452300"

For larger volumes: the IKA S 18 D - 14 G - KS disposable dispersing tool

In modern analytics, clinical diagnostics and life sciences research, the quality of sample preparation is becoming an increasingly important focus. The IKA S 18 D - 14 G - KS disposable dispersing tool (MPN 0003452300) is intended for laboratories where purity is important. As an accessory for the IKA T 18 dispersing drives (such as the T 18 digital, T 18 brushless digital or T 18 mini digital), this tool, made from plastic, offers size reduction without the risks associated with traditional reusable systems. Supplied in a practical pack of 12, it is suitable for daily high-throughput processing of medium to large sample volumes.

Avoiding cross-contamination in everyday laboratory work

The greatest enemy of reliable analytical results is sample carry-over, known as cross-contamination. When using conventional stainless steel dispersing tools, even after the most thorough manual cleaning, microscopic residues of tissue, proteins or nucleic acids (DNA/RNA) often remain trapped in the fine gaps between the rotor and stator or within the PTFE bearing. In highly sensitive procedures such as PCR analysis (polymerase chain reaction), forensic evidence collection or sequencing, these minimal residues can lead to false-positive results. The IKA S 18 D - 14 G - KS reduces this risk. As this is a purely single-use product, you use a fresh, unused instrument for each individual sample. After homogenisation, the entire plastic component, together with the potentially infectious or contaminated sample, is disposed of in accordance with best practice. If the tool is disposed of after use, there is no need for cleaning, rinsing or autoclaving between samples.

The 14-millimetre advantage: powerful for medium volumes

In direct comparison with the smaller 10-mm tools, the S 18 D - 14 G - KS model stands out due to its significantly larger stator diameter of 14 millimetres. This design expands the working range: you can homogenise volumes from 10 ml up to 500 ml (based on the viscosity of water) in a short time. The letter “G” in the product designation stands for a coarse slot geometry on the stator. This open geometry is of crucial importance when dealing with coarse-grained, tough or fibrous feed materials. Plant roots, pieces of meat, tablets or compact food samples are efficiently drawn into the shear gap by the suction forces of the 14 mm rotor, where they are cut up at speeds of up to 24,000 revolutions per minute. The result is a fine, homogeneous suspension or emulsion that is prepared for subsequent extraction or analysis.

Cost-effectiveness reimagined: Total Cost of Ownership (TCO)

A common objection to single-use laboratory items is the seemingly higher cost of materials. However, when a realistic full-cost analysis (Total Cost of Ownership) is carried out, the IKA S 18 D system can reduce the effort involved in tool maintenance. Consider the hidden costs of a stainless steel tool: laboratory staff spend time dismantling, scrubbing and reassembling the tools. Added to this are the running costs for distilled water, aggressive cleaning chemicals, energy consumption and the maintenance of autoclaves, as well as the inevitable wear and tear on ball bearings and seals. The single-use plastic tool S 18 D - 14 G - KS eliminates the need for all these steps. You save working time per sample, reduce downtime and can increase throughput in your laboratory. Staff can focus on value-adding analytical tasks rather than carrying out washing duties.

Typical areas of use

The areas of application for the 14-mm plastic tool are as diverse as they are demanding. In food testing, it is used to detect pesticide residues or pathogenic organisms in large meat or vegetable samples. In clinical pathology, it enables the safe processing of infected patient tissue. In pharmaceutical research, it is used for the size reduction of pharmaceutical formulations for active ingredient release testing.

Combination with disposable tubes

For work involving particularly critical media, the tool offers a further advantage: it can be combined with IKA disposable tubes (e.g. the ET50 tube). Simply attaching the tube to the tool shaft creates a largely closed system. When dispersing, the tube can reduce the escape of aerosols, vapours or splashes into the laboratory environment or the fume hood. This not only protects your valuable analytical equipment from contamination, but above all safeguards the health of your staff.

Technical data

  • Model: S 18 D - 14 G - KS
  • Product type: Disposable dispersing tool (rotor-stator principle)
  • Packaging unit (PU): 12 pieces per pack
  • Material: Plastic (KS)
  • Stator diameter: 14 mm
  • Rotor diameter: 10.3 mm (approx.)
  • Working range (H₂O volume): 10 to 500 ml
  • Slot geometry: Coarse (G) for high material throughput
  • Maximum permissible speed: 24,000 rpm
  • Max. permissible operating temperature: 100 °C
  • Compatible drives: IKA T 18 digital, T 18 brushless digital, T 18 mini digital
  • Sterilisability: autoclavable according to the data sheet, designed for single use

Scope of delivery

  • 1 x pack of 12 IKA S 18 D - 14 G - KS plastic dispersing tools

(Important note: The required T 18 drive motor and sample vessels are available separately and are not included in this scope of delivery.)

Individual requirements & accessories

Also available are the matching IKA ET50 disposable tubes, which fit onto the shaft of this tool and serve as a splash guard. Is 500 ml too large for your application? Then simply switch to the 10 mm version (S 18 D - 10 G - KS) for smaller volumes of up to 100 ml. Our procurement service will be happy to assist you in selecting the suitable tool sizes for your Standard Operating Procedures (SOPs).

Skip product gallery

Fits

Discount
Topseller
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
IKA T 18 digital ULTRA-TURRAX disperser, tool-free drive unit, 500 W, 0003720000
Manufacturer number: 0003720000

Anyone who frequently homogenises samples in the laboratory will be familiar with the problem: a good drive alone is not enough; ultimately, it is the right tool that determines the final fineness and throughput. The IKA T 18 digital ULTRA-TURRAX (0003720000) is designed precisely with this in mind. It is supplied as a drive unit only, with a power consumption of 500 watts, which can be freely combined with various S-18 tools for coarse, fine or single-use applications. The LED display always shows the set speed between 3,000 and 25,000 revolutions per minute, which facilitates reproducible results across multiple test runs. Rotor-stator principle with high shear rates During dispersion, the tool draws the sample in axially and forces it out radially through the narrow slots between the rotor and stator. This briefly generates very high shear rates, which break down solid components and mix liquids into stable emulsions or suspensions. With an output power of 300 watts and a processable volume of 0.001 to 1.5 litres (based on water), the T 18 digital covers typical laboratory batches up to a maximum viscosity of 5,000 mPas. Stepless speed control with LED display The speed can be adjusted continuously between 3,000 and 25,000 rpm, with a deviation of just 1 % according to IKA. Unlike purely analogue controllers, the LED display shows the set value directly. Once process parameters have been determined, they can be noted down and reproduced exactly for subsequent experiments. With a permissible duty cycle of 100 %, prolonged continuous operation is also possible without the drive having to pause in between. The choice of tool determines the result The T 18 digital is deliberately supplied without a dispersing tool, as the most suitable tool depends heavily on the specific sample. The standard S 18 N - 19 G tool with PTFE bearings is suitable for coarse pre-shredding and tougher media, whilst the S 18 N - 10 G offers a narrower gap geometry for finer end products. Those who frequently work with varying samples that are potentially susceptible to contamination will find disposable plastic tools to be a practical alternative, as they reduce the risk of cross-contamination between batches. Typical applications As a standalone drive unit, the T 18 digital is particularly suitable for laboratories that already work with a variety of tools or switch specifically between several applications: Preparation of emulsions and suspensions in sample preparation Homogenisation of tissue samples in biology and life sciences research Mixing pigments and fillers into dispersions Routine tasks in quality assurance with varying tool configurations Setting up customised workstations through flexible combination with a stand and tool Selection guide for the T-18 range Drive unit only, complete set or just the tool? The four products compared here differ primarily in terms of what is included in the scope of delivery and, in the case of the mini-drive, in terms of motor power. ProductTypeMotor power (input/output)Speed rangeScope of deliveryT 18 digital ULTRA-TURRAX (this product)Drive unit500 W / 300 W3,000 to 25,000 rpmDrive unit only, without toolsT 18 digital SolutionSet500 W / 300 W3,000 to 25,000 rpmDrive unit, S 18 N - 19 G tool, stand, boss headT 18 mini digital SolutionSet, compact drive210 W / 160 W3,000 to 25,000 rpmDrive unit, tool S 18 N - 19 G, stand, boss headS 18 N - 19 G dispersing toolSingle toolNo built-in motorPermitted up to 25,000 rpmTool only Anyone who already owns a T-18 drive or wishes to switch between several tools as required is best served by the drive described here, which does not require a tool. The complete T 18 digital Solution Set is suitable for getting started straight away without having to order a separate tool; those looking for a more compact workstation will find the T 18 mini digital Solution to be a suitable alternative with lower motor power. Technical details Motor power input500 WMotor power output300 WProcessing volume (H₂O)0.001 to 1.5 lMax. viscosity5,000 mPasSpeed range3,000 to 25,000 rpm, continuously variableSpeed deviation1 %Speed displayLEDNoise level without tools75 dB(A)Support arm diameter13 mmSupport arm length160 mmProcess typeBatchPermissible duty cycle100 %Permissible ambient temperature range5 to 40 °CPermissible relative humidity80 % (up to 31 °C), decreasing linearly to a maximum of 50 % (at 40 °C)Dimensions (W x H x D)87 x 271 x 106 mmWeight2.5 kgConnected load220 to 240 V, 50/60 Hz, 500 W (other voltage options from 100 to 120 V available)IP ratingIP 20 (DIN EN 60529) Scope of delivery 1 x IKA T 18 digital ULTRA-TURRAX (drive unit, without dispersing tool) The dispersing tool and stand are not included and must be purchased separately to suit the specific application. Differences from the neighbouring series If you also require a brushless motor with a timer, the IKA T 18 brushless series offers the next step up: the T 18 brushless digital ULTRA-TURRAX as a drive unit without a tool, or the T 18 brushless digital Solution as a complete set. Both drive units operate with lower wear than the classic T 18 digital. An overview of all dispersers can be found in the ‘Dispersers’ category; suitable tools are listed under ‘Dispersing Tools’. Application, set-up and maintenance For short-term manual operation, the T 18 digital fits comfortably in the hand; for longer or reproducible processes, it can be securely mounted on a stand, such as the R 1826 plate stand. Operation is permitted at an ambient temperature of 5 to 40 °C and a relative humidity of up to 80 % at 31 °C, decreasing linearly to a maximum of 50 % at 40 °C. The drive, with degree of protection IP 20, is not designed for use in damp rooms or outdoors. After each use, the tool used should be dismantled and, depending on the material, cleaned or sterilised before the next procedure begins. At the end of its service life, as an electrical appliance, the drive must not be disposed of with household waste but must be placed in the separate collection for waste electrical and electronic equipment. WarrantyManufacturer’s warranty from IKA: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our page Environment and disposal.Individual requirements & procurement service In addition to the standard tools, further accessories for the T 18 digital are also available, such as stands, mounting elements or the Silentstream flow breaker to reduce air ingress during dispersion. Do you require a specific tool, a qualification document or assistance in selecting the right configuration? Through our procurement service, we can assist you with procurement and configuration. Frequently Asked Questions Is a dispersing tool included in the scope of delivery?No, the T 18 digital is supplied exclusively as a drive unit. A suitable tool, such as the S 18 N - 19 G, must be purchased separately. Which tool is suitable for coarse pre-grinding?For coarse applications and tougher media, the S 18 N - 19 G with PTFE bearings is the standard choice; finer end products can be achieved with the S 18 N - 10 G. How accurately can the speed be reproduced?The LED display shows the set value within a range of 3,000 to 25,000 rpm with a deviation of around 1 %, which facilitates the exact repetition of test series. Is a stand included in the scope of delivery?No; for continuous operation, we recommend a separately available stand such as the R 1826 plate stand. What is the difference between the T 18 digital and the T 18 mini digital Solution?The T 18 mini digital Solution features a more compact, brushless drive with lower motor power and comes as a set including the tool and stand; the T 18 digital described here is the more powerful drive unit without accessories.

Sale price: €1,305.53 Manufacturer's RRP: €1,830.00 28% below manufacturer's RRP