IKA S 65 C - G 65 F Dispersing Tool, Ø 65 mm, Ceramic, for T 65, 0010001667
€5,122.40
% Manufacturer's RRP: €5,392.00 5% below manufacturer's RRP
- Operating range 2 to 30 l, stator 65 mm, rotor 58 mm
- Ball bearings and ceramic plain bearings, AISI 316L and ceramic
- Final particle size 5 to 20 µm (suspensions), 1 to 10 µm (emulsions)
- Immersion depth 90 to 450 mm, installation length 520 mm
- Suitable for solvents, up to 170 °C
- Can be sterilised using all methods; not designed for use under vacuum
Product information "IKA S 65 C - G 65 F Dispersing Tool, Ø 65 mm, Ceramic, for T 65, 0010001667"
In the S 65 C - G 65 F (0010001667), the parts in contact with the product are made of AISI 316L and ceramic. The tool is designed for batch sizes of 2 to 30 l and is operated by the T 65 digital drive.
Bearings and limit values
The shaft runs in a ball bearing and a ceramic plain bearing. This tool is not designed for use under vacuum. Solvents are permitted; the pH range is from 2 to 13. The maximum operating temperature is 170 °C; sterilisation may be carried out using any method.
Geometry and precision
Stator 65 mm, rotor 58 mm, gap 0.5 mm. At 9,500 rpm, the rotor circumference reaches 28.8 m/s. The final fineness ranges from 5 to 20 µm for suspensions and 1 to 10 µm for emulsions. The immersion depth is 90 to 450 mm with an installation length of 520 mm. The tool weighs 3.94 kg. The 58 mm rotor achieves a higher peripheral speed than the 53 mm rotor of the S 65 C - G 65 G, at 26.4 m/s.
Typical applications
- Dispersing and emulsifying 2 to 30 l
- Suspensions with final particle sizes of 5 to 20 µm
- Emulsions with final particle sizes of 1 to 10 µm
- Batches with solvents in the pH range 2 to 13
- Processes up to 170 °C without vacuum operation
Technical details
| Processable volume (H2O) | 2 to 30 l |
| Stator diameter | 65 mm |
| Rotor diameter | 58 mm |
| Stator/rotor gap width | 0.5 mm |
| Max. permissible speed | 9,500 rpm |
| Maximum circumferential speed | 28.8 m/s |
| Penetration depth | 90 to 450 mm |
| Installation length | 520 mm |
| Bearing | Ball bearings and ceramic plain bearings |
| Materials in contact with the product | AISI 316L, ceramic |
| pH range | 2 to 13 |
| Suitable for solvents | Yes |
| Max. operating temperature | 170 °C |
| Sterilisability | All methods |
| Suitable for vacuum sterilisation | No |
| Final particle size of suspensions | 5 to 20 µm |
| Final fineness of emulsions | 1 to 10 µm |
| Weight | 3.94 kg |
Scope of delivery
- 1 x IKA S 65 C - G 65 F dispersing tool (single tool)
- The T 65 digital drive is not included in the Scope of delivery.
Comparison within the S 65 series
The S 65 KD - G 65 F has the same geometry with a PTFE seal and FFKM O-ring: same stator, same rotor, same gap, 2 to 30 l and the same final particle sizes, plus vacuum down to 100 mbar. For applications up to 50 l, the S 65 C - G 65 G also features ceramic components, but with a 53 mm rotor and a particle size range of 25 to 75 µm for suspensions. Fitted with a mechanical seal, capable of a vacuum down to 1 mbar and pressure up to 6 bar, but also featuring a 65 mm stator and a 58 mm rotor, the S 65 KG - HH - G 65 F operates at 2 to 30 l.
Individual requirements and procurement service
LT Laborhandel can source the T 65 digital drive and other equipment on request. The procurement service will put together the right combination for your batch size.
Fits
The T 65 digital ULTRA-TURRAX is designed for the transition from the laboratory to the pilot plant, for batches of 2 to 50 litres (H₂O) with a power consumption of 2,600 watts. Unlike the smaller units in the T series, it does not run on a single-phase laboratory power supply, but requires a three-phase connection of 3 x 400 volts, which must be installed by a qualified electrician. Anyone planning this connection should take this into account at the installation stage.For the transition from laboratory to pilot plantThree different rotor-stator geometries cover a range of applications from fine dispersion to coarse pre-comminution; a plug-in coupling allows tool changes to be made on the drive without the need for additional tools. Depending on the configuration, the stainless steel dispersing tools can also be used under vacuum and overpressure, provided the relevant accessories are designed for this purpose. The speed range extends from 1,000 to 9,500 rpm with a tolerance of 3 per cent, displayed via a 7-segment LED display; an error code display assists with troubleshooting during operation.Performance data for high throughputsWith a power input of 2,600 watts and an output power of 2,200 watts, the T 65 digital significantly outperforms the smaller T 25 and T 50 models; the maximum viscosity is 5,000 mPas. Measuring 300 x 420 x 400 millimetres and weighing 35 kilograms, the unit is designed for a fixed installation rather than portable use; without tools, the noise level is 75 dB(A). The IP 54 protection rating in accordance with DIN EN 60529 is noticeably higher than the IP 20 rating of the smaller T-series units, thereby allowing use in more demanding environments; permissible ambient temperatures range from 5 to 40 degrees Celsius with up to 80 per cent relative humidity.Power connection: three-phase and to be carried out only by a qualified electricianThe mains connection is 3 x 400 volts at 50 or 60 hertz; alternatively, a 3 x 230-volt version is available. A 2.5-metre power cable is not included in the scope of delivery and must be ordered separately as an accessory, as must the SI 400 safety limit switch (ID 0003294800) with the matching SI 474 bracket (ID 0003264400). According to the manufacturer, the actual mains connection must be carried out exclusively by a qualified electrician; this is a point that should be taken into account at an early stage when planning the installation, particularly if only a single-phase connection is currently available at the intended location.Typical areas of applicationPilot plants and technical trials prior to full-scale productionHomogenisation of large batches up to 50 litresApplications requiring high power and an increased protection ratingSwitching between several rotor-stator geometries depending on the formulationSelection guide: smaller model or laboratory unitIf only a single-phase connection is available or the volume is less than 30 litres, the T 50 digital ULTRA-TURRAX is the more practical choice. For laboratory volumes up to 2 litres, the T 25 digital ULTRA-TURRAX drive unit or the T 25 digital Solution complete set are significantly better suited.Technical detailsMotor power input / output2,600 W / 2,200 WProcessable volume (H₂O)2 to 50 lMax. viscosity5,000 mPasSpeed range1,000 to 9,500 rpm, continuously variable (tolerance 3 %)Speed display7-segment LEDNoise level (without tools)75 dB(A)Process typeBatchPermissible ambient temperature range / humidity5 to 40 °C / 80 %Protection classIP 54 in accordance with DIN EN 60529Rated power3 x 400 V, 50/60 Hz, 2,600 W (additional voltage variant 3 x 230 V available; connection must be carried out by a qualified electrician)Dimensions (W x H x D)300 x 420 x 400 mmWeight35 kgScope of deliveryT 65 digital ULTRA-TURRAX drive unitRotor spannerHook spannerShaft spannerCable gland for the switch cable (2 pieces)Hexagonal angle spannerThe dispersing tool, mains cable (2.5 m) and SI 400 safety limit switch are not included in the scope of delivery and are available separately. The mains connection must only be carried out by a qualified electrician.Regulatory informationThis device is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of end-of-life equipment can be found on our Environment and Disposal page.Warranty and Procurement ServiceThe T 65 digital is covered by IKA’s manufacturer’s warranty: 2 years, extended to 3 years if registered at ika.com/register within 90 days of purchase. LT Laborhandel’s procurement service compiles dispersing tools, stands, safety limit switches and mains cables to suit the existing drive.