Memmert IN75plus Incubator, 74 L, with TwinDISPLAY & natural convection

The Memmert IN75plus is a high-precision incubator with natural convection, specially developed for applications in research, medicine, pharmaceuticals and food analysis where absolute silence inside the chamber is required. With a chamber volume of 74 litres and the high-end TwinDISPLAY control system, this model offers maximum process reliability for the gentle incubation of sensitive organisms.

High-end control system: ControlCOCKPIT with TwinDISPLAY

Unlike the standard version, the IN75plus features the adaptive TwinDISPLAY. Two high-resolution TFT colour graphic displays (touchscreens) enable intuitive setting and monitoring of all parameters. Take advantage of exclusive functions such as HeatBALANCE for individual adjustment of the heat distribution (top/bottom) or the graphical programming of temperature profiles directly on the unit.

Gentle temperature control without forced air circulation

Natural convection ensures purely thermal air circulation without a fan. This effectively prevents samples from drying out and minimises the risk of cross-contamination from airborne particles. The integrated all-round surface heating guarantees homogeneous temperature distribution throughout the entire stainless steel interior.

Maximum safety & sterilisation

The IN75plus offers dual safety through two Pt100 temperature sensors (DIN Class A), which monitor each other and take over the function in the event of a fault (AutoSAFETY). For hygiene-critical areas, a permanently installed sterilisation programme is integrated, which reliably sterilises the interior (without load) at +160 °C for over 4 hours.

Technical details

• Model: Memmert IN75plus (2012 generation)
• Capacity: 74 litres
• Convection type: Natural convection (no forced air circulation)
• Temperature setting range: +20 °C to +80 °C
• Operating temperature range: At least 5 °C above room temperature to +80 °C
• Setting accuracy: 0.1 °C
• Control system: TwinDISPLAY (2x TFT touchscreen)
• Temperature sensors: 2x Pt100 sensors, DIN Class A (4-wire measurement)
• Sterilisation: Integrated programme (4 hours / 160 °C) for internal sterilisation
• Functions: HeatBALANCE, SetpointWAIT, AtmoCONTROL
• Interior: Stainless steel (grade 1.4301), deep-drawn ribbing
• Outer casing: Textured stainless steel sheet, galvanised rear panel
• Internal dimensions (W x H x D): 400 x 560 x 330 mm
• External dimensions (W x H x D): 585 x 944 x 514 mm (depth excluding door handle, +56 mm for handle)
• Load capacity: Max. 120 kg total / max. 20 kg per shelf
• Shelves: 2 stainless steel wire shelves included, max. 6 possible
• Interfaces: Ethernet LAN, USB (for programme transfer/logging)
• Voltage / Power: 230 V, 50/60 Hz / approx. 1250 W
• Net weight: approx. 66 kg

Scope of delivery

• Memmert IN75plus incubator (basic unit)
• 2 x stainless steel wire shelves (electropolished)
• 1 x factory calibration certificate (at +37 °C)
• 1 x USB stick with AtmoCONTROL software
• 1 x mains cable
• Operating instructions

Customised requirements & procurement service

Do you require additional stainless steel grating (up to 6 available), a feed-through for external sensors or the AtmoCONTROL software? We will configure your Memmert incubator precisely to your laboratory requirements. Take advantage of our bespoke procurement service for accessories and special requests.