Unigloves Select Black 300 Latex Gloves, black, extra-long, powder-free, size M, 24303

Long tattoo sessions and kitchen work involving frequent contact with washing-up water have one thing in common: if the cuff is too short, liquid can quickly seep into the glove at the wrist. Unigloves has developed the Select Black 300 specifically for this scenario, described by the manufacturer itself as ‘The Long Creative’, the extended version of the black disposable latex glove, the Select Black. With a cuff length of 295 mm (± 5 mm), around 55 mm longer than the standard version, it provides additional protection for the wrist and part of the forearm. They are sold in a carton of 1,000 gloves, divided into 10 boxes of 100 gloves each, in five sizes from XS to XL.

Extended cuff and non-slip, chlorinated surface

The name derives from the length: the technical data sheet specifies 295 ± 5 mm for size XS, and at least 295 ± 5 mm for sizes S to XL; the model designation ‘300’ rounds off this figure. At 0.16 ± 0.03 mm, the palm is noticeably thicker than on the standard Select Black version (0.11 mm), which provides additional durability during prolonged contact with water or cleaning agents; the same applies to the fingertips, which measure 0.16 ± 0.03 mm. The cuff itself is also documented as being 0.11 ± 0.02 mm thick, a measurement for which no value is given in the data sheet for the shorter Select Black version. The surface is micro-textured on the fingertips and palm for a secure grip and chlorinated on the outside to make it easier to put on and take off. According to the manufacturer, the glove is also touchscreen-compatible, allowing smartphones or tablets to be operated without removing the gloves, for example for documentation between two work steps.

Chemical protection in accordance with EN 374, Category III, Type B, with three tested chemicals

Select Black 300 shares the chemical resistance profile of the short version: certified to EN ISO 374-1 in Category III, Type B, with additional protection against viruses, fungi and bacteria in accordance with EN ISO 374-5. Three test chemicals are specified with numerical values: 40 per cent caustic soda with a permeation level of 6 and a degradation rate of minus 55.11 per cent, 30 per cent hydrogen peroxide with a level of 2 and a degradation rate of plus 9.7 per cent, and 37 per cent formaldehyde with a level of 2 and a degradation rate of minus 12.4 per cent. For other chemicals, the manufacturer’s product-specific chemical resistance table applies.

Certified to EN 455 and PPE Category III

The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out in accordance with Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. In the 1,000 ml water-tightness test, the glove achieves a high level of impermeability with an AQL value of 1.5; it is also food-safe. The data sheet does not specify a particular medical device class. Note on the data: The data sheet analysed bears issue number 3.0 dated 18.07.2024 and is therefore older than the 2026 data sheets for the other products compared here; however, in terms of content, it is the most up-to-date source available.

Choosing the right size

With Select Black 300, too, the manufacturer assigns a numerical glove size to each clothing size, ranging from 5 to 6 for XS to 9 to 10 for XL; this is confirmed directly in the product’s own data sheet and is identical to the short Select Black version.

Select Black 300 or Select Black: which length is right for you?

Select Black 300 and the short Select Black share the same colour, chemical resistance profile and certification, but differ significantly in length and material thickness. For standard applications in the laboratory or at the treatment station, the short version with a cuff length of around 240 mm is sufficient. As soon as splash water, cleaning agents or frequent contact with liquids occur at the wrist, such as when washing up in a catering kitchen or during long tattoo sessions involving frequent hand contact with ink and disinfectant, the 300 version offers more robust protection with its cuff that is almost 60 mm longer and its thicker palm. For those with a natural latex allergy, a nitrile glove such as Black Pearl from the nitrile glove range is the suitable alternative to both Select Black variants.

Use, storage and disposal

The data sheet does not provide any information on storage conditions or shelf life; therefore, no figures are given here either. Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand.

As a practical observation from everyday work, rather than a manufacturer’s specification: precisely because of the long cuff, the glove is often chosen for tasks involving direct contact with liquids and is therefore changed more frequently than a standard glove, for example after each wash cycle or every break during a tattoo session. After use, the gloves are usually disposed of as clinical waste; contaminated gloves are disposed of separately in accordance with internal regulations on hazardous substances.

Typical applications

The manufacturer explicitly identifies two target groups for Select Black 300 for whom the extended cuff makes a practical difference:

• Tattoo and piercing studios during long sessions involving repeated contact with ink, disinfectants and skin contact surfaces
• Catering and food processing, particularly when washing up and carrying out cleaning tasks involving splashing water on the wrist, thanks to food-grade certification
• Laboratory work with an increased risk of splashes, where the extra cuff length offers a clear advantage over standard gloves

Where the standard length is sufficient, the short Select Black is the more economical choice; see the distinction above.

Assessing requirements correctly: from the carton to the shift

The box of 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available independently at different workstations. In a catering kitchen with an estimated consumption of 15 gloves per dishwasher per shift, one box of 100 covers around 6 to 7 shifts; a whole carton therefore covers around 65 shifts. In a tattoo studio, assuming 3 to 5 pairs of gloves per longer session (changed during breaks), one box of 50 pairs is sufficient for around 10 to 16 sessions, whilst a full carton covers 100 to 165 sessions. These are sold exclusively as whole cartons; a single box of 100 cannot be selected separately during the ordering process.

Frequently asked questions about the 1,000-pair carton

How long is the cuff really, 295 or 300 mm?
According to the data sheet, it measures 295 mm (± 5 mm); the model designation ‘300’ is the manufacturer’s rounded marketing figure.

Who did Unigloves develop this glove for?
Under the name ‘The Long Creative’, the manufacturer explicitly lists tattoo artists, as well as the catering and food processing sectors, as the target groups for the extended cuff.

Is Select Black 300 suitable for people with a latex allergy?
No, the glove is made of natural latex. If you have a known natural latex allergy, a nitrile glove such as Black Pearl is the right choice.

How resistant is the glove to chemicals?
Three test chemicals are listed with numerical values: 40% caustic soda (Level 6, minus 55.11 per cent), hydrogen peroxide 30 per cent (Level 2, plus 9.7 per cent) and formaldehyde 37 per cent (Level 2, minus 12.4 per cent), identical to the short Select Black version.

How does the Select Black 300 differ from the short Select Black?
Primarily in length (295 mm instead of 240 mm) and material thickness (0.16 mm instead of 0.11 mm on the palm). The colour, certification and chemical resistance profile are identical.

How do I find the right size?
Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above.

Technical details

Scope of delivery

• 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Select Black 300 latex gloves (size as per variant selection)

Individual requirements and procurement service

Do you require a different size, the short Select Black for standard applications, or a latex-free nitrile alternative from the Unigloves Pearl range for your studio or business? Our procurement service will be happy to assist you in making the right choice.