Latex gloves
Latex gloves offer high elasticity and very good tactile sensitivity, tried and tested for examinations and tasks requiring fine motor skills in laboratories, medical practices and hospitals. LT Laborhandel offers latex examination gloves from Meditrade (Gentle Skin range) and Unigloves, available powder-free or with a grip coating, in sizes XS to XL. Is there a latex allergy in your team? You’ll find a protein-free alternative in the nitrile gloves category. Back to the overview: disposable gloves.
Meditrade Gentle Skin Grip, latex examination gloves, powder-free, 100 pieces - M, 1221GRIP-M
Wet instruments, oily tools or slippery packaging put many disposable gloves to the test: as soon as the surface becomes damp or greasy, the grip decreases noticeably. According to the manufacturer, Meditrade Gentle Skin Grip latex examination gloves are the grippiest latex gloves in the Meditrade range. An acrylic polymer coating on a textured surface provides extra grip where smooth gloves reach their limits. Available in sizes XS to XL, each in packs of 100. Acrylic polymer coating for extra grip In addition to the ingredients typically found in latex gloves, natural rubber latex, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide and antioxidants, the Grip range also features an acrylic polymer coating on the textured surface. This coating is the key difference compared to traditional latex gloves without any special grip optimisation and, according to the manufacturer, improves grip, particularly when handling damp, oily or powdery surfaces. The glove is free from mercaptobenzothiazole and thiurams. Thickness from the cuff to the fingertips According to the manufacturer’s data sheet, the thickness at the cuff is at least 0.08 mm, at the palm at least 0.11 mm and at the fingertips at least 0.12 mm, ensuring that the greatest material thickness is available at the point subject to the most stress. The breaking force is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5 for the absence of holes in the batch. The rolled cuff also makes it easier to put on and take off the gloves, even when the hands themselves are already damp. Class I medical device and PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves, as well as EN ISO 374-1, -2, -4 and -5 for protection against microorganisms, supplemented by EN 16523-1 for chemical permeation and EN 420:2003+A1:2009 as the general standard for protective gloves. It is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment under Regulation (EU) 2016/425, and is manufactured under a quality management system certified according to EN ISO 13485:2016. Why smooth gloves reach their limits in wet conditions A purely textured glove without an additional coating loses some of its grip when it comes into contact with water, oil or cleaning agents, because a thin film of liquid forms between the glove and the workpiece. This is precisely where the acrylic polymer coating of the Gentle Skin Grip comes into its own: according to the manufacturer, it increases friction even in damp conditions without compromising the elasticity of the natural latex. For standard dry tasks without any particular risk of slipping, however, a simpler latex glove from our range is often sufficient. Selection guide: choosing the right size As with the other Gentle Skin gloves, the size range from XS to XL is based on the width of the hand, measured at the widest point excluding the thumb. SizeManufacturer’s item no.WidthLength XS1221GRIP-XS< 80 mmmin. 240 mm S1221GRIP-S80 mm (± 10 mm)min. 240 mm M1221GRIP-M95 mm (± 10 mm)min. 240 mm L1221GRIP-L110 mm (± 10 mm)min. 240 mm XL1221GRIP-XL> 110 mmmin. 240 mm Distinction within the Gentle-Skin latex range Within the Meditrade latex range, the Grip differs from the other two variants primarily due to its coating. Those who, on the other hand, require a particularly fine sense of touch for pipetting and laboratory work are better served by the low-protein Meditrade Gentle Skin Sensitive. For general routine use without any specific grip or protein requirements, the Meditrade Gentle Skin compact+ is available, with a comparable basic wall thickness. All three are tested according to EN 455 and EN ISO 374 and are classified as a Class I medical device and PPE Category III. Those wishing to avoid natural latex entirely will find latex-free alternatives in our range of nitrile gloves, although these do not feature the grip coating described here. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use only. As the gloves are made from natural rubber latex, the manufacturer expressly warns of the risk of allergic or even anaphylactic reactions. After use, the gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the level of contamination. Typical applications The grippy coating makes the Gentle Skin Grip of interest wherever moisture or grease would otherwise make a firm grip difficult: Cleaning and processing of laboratory glassware and instruments, often in contact with water or cleaning agents Handling oily or greasy components in workshops and industry Packaging and order-picking tasks involving frequent changes of material Examination and care tasks where a secure grip on damp surfaces is required For example, when rinsing and sorting laboratory glassware under running water, the grip is maintained, whereas an uncoated glove would slip more easily in the same situation. The difference compared to a smooth glove surface is also clearly evident when handling greasy seals or lubricants in the workshop. Assessing your requirements correctly: from the pack to the carton Gentle Skin Grip is sold in packs of 100 per size; according to the manufacturer’s data sheet, a carton contains 10 packs, i.e. 1,000 gloves. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. Businesses with multiple workstations or frequent glove usage should ideally stock several packs of the appropriate size to ensure that no workstation runs out of a particular size. Frequently asked questions about Gentle Skin Grip What sets the Grip apart from other latex gloves?The textured surface is additionally coated with an acrylic polymer, which, according to the manufacturer, improves grip on damp or oily surfaces. Is the glove sterile?No, according to the data sheet, it is a non-sterile, single-use glove. How thick is the glove?The thickness is at least 0.08 mm on the cuff, 0.11 mm on the palm and 0.12 mm at the fingertips. Is the Grip suitable for people with a latex allergy?No, the glove is made of natural rubber latex and, according to the manufacturer, may trigger allergic or even anaphylactic reactions. What is the shelf life of the glove?According to the data sheet, 3 or 5 years when stored in a cool, dry place, protected from direct sunlight. Is the Grip coating also available on a latex-free glove?For this data sheet, the coating is only documented for the latex version. For a latex-free alternative offering comparable grip performance, our procurement service will be happy to assist you with your selection. What sizes are available?XS, S, M, L and XL, each with its own width specification as per the data sheet, ranging from under 80 mm to over 110 mm. Can I order individual gloves instead of the whole pack?No, the product is sold exclusively in packs of 100 per size. Technical details MaterialNatural rubber latex with an acrylic polymer coating SurfaceTextured, rolled cuff, ambidextrous Lengthmin. 240 mm Cuff thicknessmin. 0.08 mm Palm thicknessmin. 0.11 mm Fingertip thicknessmin. 0.12 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces) CharacteristicsPowder-free, non-sterile, textured, rolled cuff, ambidextrous, free from mercaptobenzothiazole and thiurams Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1, EN 420:2003+A1:2009, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Gentle Skin Grip latex examination gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a latex-free alternative with similar grip, or larger purchase quantities for your business? Our procurement service will be happy to assist you in making the right choice.
Meditrade Gentle Skin Sensitive Latex Gloves, natural colour, powder-free, 100 pieces, size M, 1221RMT
Anyone who spends many hours in a laboratory or in a care setting pipetting, decanting samples or handling delicate instruments will quickly realise whether a glove is helpful or more of a hindrance. Meditrade Gentle Skin Sensitive latex gloves are low-protein natural latex gloves designed specifically for this kind of fine motor work: powder-free, thin-walled and with a stretch that moulds closely to the hand without causing fatigue even when worn for hours on end. Available in sizes XS to XL, each pack containing 100 gloves. Low-protein thanks to a multi-stage processing method Natural latex naturally contains water-soluble proteins which can trigger skin reactions in sensitised individuals. The Sensitive range is therefore processed using a multi-stage washing process and additionally undergoes double chlorination, which reduces the protein content whilst also allowing the gloves to be put on easily without powder. This does not make the glove completely latex-free; it remains a natural rubber product containing natural rubber latex, sulphur, dithiocarbamate, zinc oxide, titanium dioxide, potassium hydroxide, calcium carbonate, polyacrylate and colour pigments. If you have a known Type 1 latex allergy, a nitrile glove from our range is therefore the safer choice. Gradual thickness variation from the palm to the fingertips According to the manufacturer’s data sheet, the thickness at the palm is at least 0.11 mm, and at the fingertips 0.13 mm (± 0.02 mm), slightly thicker to provide additional tactile sensitivity and mechanical strength precisely where the greatest stress occurs during gripping and pipetting. The force at break is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5 for the absence of holes in the batch. The textured, micro-roughened surface with a rolled cuff also ensures a secure grip, whether used dry or in contact with aqueous solutions. Class I medical device and PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves, as well as EN ISO 374-1, -2, -4 and -5 for protection against microorganisms, supplemented by EN 16523-1 for chemical permeation and EN ISO 21420:2020 as the basic standard for protective gloves in general. It is classified as a Class I medical device under Regulation (EU) 2017/745 and as Category III personal protective equipment under Regulation (EU) 2016/425, and is manufactured under a quality management system certified according to EN ISO 13485:2016. According to the data sheet, it is also suitable for contact with food, which is relevant, for example, for sample preparation in food analysis. Latex or nitrile: when it’s worth switching Natural latex offers high elasticity with low mechanical stress, which means the Gentle Skin Sensitive fits snugly to the hand and provides a particularly fine sense of touch. However, natural latex is less suitable for tasks involving non-polar solvents such as oils or fats, as the material can swell. In such cases, or where there is a known latex allergy, a nitrile glove from our range is the more appropriate choice, offering a comparable fit but greater chemical resistance. Selection guide: choosing the right size The size range extends from XS to XL and is based on the width of the hand, measured at the widest point excluding the thumb. A glove that is too tight causes the hand to tire more quickly when worn for long periods, whilst a glove that is too loose reduces both tactile sensitivity and a secure grip. SizeManufacturer’s item no.WidthLength XS1221RXST< 80 mmmin. 240 mm S1221RST80 mm (± 10 mm)min. 240 mm M1221RMT95 mm (± 10 mm)min. 240 mm L1221RLT110 mm (± 10 mm)min. 240 mm XL1221RXLT> 110 mmmin. 240 mm Differentiation within the Gentle Skin latex range Two other latex gloves from the same Meditrade range are available alongside the Gentle Skin Sensitive. Anyone who, in addition to a fine sense of touch, requires greater grip on damp or oily surfaces will find this in the textured Meditrade Gentle Skin Grip with its acrylic polymer coating. For day-to-day routine use without the protein-reduced processing of the Sensitive range, the Meditrade Gentle Skin compact+, with a comparable wall thickness, is an obvious alternative from the same product family. All three share the same basic construction made from natural latex with a rolled cuff and testing according to EN 455 and EN ISO 374-1, but differ in wall thickness, surface treatment and protein content. Those who wish to avoid natural latex altogether will find a latex-free alternative in our range of nitrile gloves. Use, storage, shelf life and disposal According to the manufacturer, the gloves are suitable for all areas where there is a risk of contamination, ranging from highly infectious situations in hospitals and doctors’ surgeries, through the care sector and laboratories, to the pharmaceutical industry, cleaning and industrial applications. According to the data sheet, the shelf life is 3 or 5 years, provided they are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile and intended for single use only; used gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the level of contamination. It is recommended that the gloves be changed at the latest upon the first visible sign of damage or soiling, even if the specified shelf life of 3 or 5 years has not yet been reached. Typical applications The low-protein formulation makes the Gentle Skin Sensitive particularly interesting where tactile sensitivity and skin compatibility have to come together: Sample preparation and pipetting tasks in the laboratory where dexterity is required Care and examination tasks involving frequent glove changes throughout a shift Food analysis and quality control, where the glove is suitable for food contact according to the data sheet Cleaning and routine tasks in the pharmaceutical industry and industrial settings For example, when pipetting a series of samples over several hours, the thin-walled material on the palm and fingertips can be utilised without the hand tiring prematurely, an advantage over thicker standard gloves. Assessing requirements correctly: from the pack to the carton Gentle Skin Sensitive is sold in packs of 100 per size. According to the manufacturer’s specifications, one carton contains 10 packs, i.e. 1,000 gloves, with a pallet comprising 56 cartons. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, a pack of 100 will last for around two working weeks; at 30 gloves per day, it will last for three to four working days. For businesses with multiple workstations or varying sizes, it is advisable to stock several packs of the appropriate size straight away, to ensure that no workstation runs out of a particular size. Frequently asked questions about Gentle Skin Sensitive Is the Gentle Skin Sensitive suitable for people with a latex allergy?No. The glove is low in protein but is still made from natural rubber latex. For those with a known Type 1 latex allergy, we recommend a nitrile glove from our range. Are the gloves sterile?No; according to the data sheet, they are non-sterile, single-use gloves. How thick is the glove on the palm and fingertips?The thickness is at least 0.11 mm on the palm and 0.13 mm (± 0.02 mm) on the fingertips. Is the glove suitable for contact with food?Yes, according to the data sheet, it is suitable for contact with food. What is the shelf life of the glove?3 or 5 years according to the data sheet, provided it is stored in a cool, dry place and protected from direct sunlight. Can I order individual gloves instead of the whole pack?No, the sales unit is a pack of 100 per size. Technical details MaterialNatural latex ColourNatural white SurfaceTextured, chlorinated, rolled cuff Lengthmin. 240 mm Thickness (palm)min. 0.11 mm Fingertip thickness0.13 mm ± 0.02 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces), 56 cartons per pallet FeaturesPowder-free, non-sterile, textured, rolled cuff, ambidextrous, suitable for food contact Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Gentle Skin Sensitive latex gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a sterile version or larger purchase quantities for your laboratory or practice? Our procurement service will be happy to support you with the suitable selection.
Meditrade Gentle Skin compact+ latex gloves, powder-free, 100 pcs., XS, 1221XSI
Where natural rubber latex is not an issue, its elasticity and comfort make it the first choice amongst disposable gloves for many users. Meditrade Gentle Skin compact+ latex gloves are powder-free, natural white, online-chlorinated for easy donning and doffing, and available in packs of 100 in sizes XS to XL. Natural rubber latex for high elasticity The glove is made from natural rubber latex with a textured surface and a rolled cuff. The online chlorination process reduces the material’s natural stickiness, making the glove easier to put on and take off than an untreated latex variant, even with slightly damp hands. The high inherent elasticity of natural rubber ensures a snug, second-skin fit, which many users prefer to nitrile for tasks requiring fine motor skills, as the glove adapts more directly to the shape of the hand. Thickness for delicate tasks According to the data sheet, the median thickness at the palm and fingertips is at least 0.11 mm in each case, with a median length of at least 240 mm. The width varies according to size: under 80 mm for XS, 80 mm (± 10 mm) for S, 95 mm (± 10 mm) for M, 110 mm (± 10 mm) for L and over 110 mm for XL. The force at break is at least 6 N (median), both before and after artificial ageing, tested with an AQL value of 1.5. Class I medical device and Category III PPE The Gentle Skin compact+ is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN ISO 374-1/-2/-4/-5 and EN ISO 21420:2020, and is manufactured under a quality management system certified according to EN ISO 13485:2016. Important note for those with a latex allergy As a natural rubber product, the glove contains dithiocarbamates (ZDC, ZDBC) according to the data sheet, for which there is a warning regarding possible allergic reactions. However, it is free from mercaptobenzothiazole and thiurams, two other common contact allergens used in rubber processing. Organisations with staff or customers known to have a latex allergy should switch to a nitrile-based alternative. Compact pack of 100 as a sales unit Unlike some nitrile variants in the range, which are sold in large cartons containing several thousand pieces, the price of Gentle Skin compact+ applies per handy pack of 100. It is ordered by the carton, at least 10 packs (1,000 pieces), then in steps of 10. Typical applications As a powder-free, highly elastic latex examination glove, the Gentle Skin compact+ is suitable for, amongst other things: Examination and care activities requiring a high degree of tactile sensitivity and dexterity Medical practices and clinics where there are no known cases of latex allergy amongst staff or patients Routine laboratory work where the high elasticity of natural rubber latex is preferred over nitrile Short-term tasks involving frequent glove changes, thanks to the compact pack of 100 For example, during examinations requiring fine motor skills, such as palpating small structures, the snug fit of natural rubber latex can be put to targeted use, whilst the compact pack size ensures that a fresh pack is always to hand, even for less frequent tasks, rather than having to keep a large carton in stock. In training situations too, where groups of trainees rotate, the 100-pack makes it easier to track consumption per group than with a large carton. Packaging: from individual pack to carton Gentle Skin compact+ is sold in packs of 100 pieces per size. According to the manufacturer, one carton holds 10 packs (1,000 pieces), with a pallet containing 54 cartons. The individual pack measures 120 x 215 x 70 mm, whilst the carton measures 245 x 360 x 225 mm, dimensions that aid storage planning in first-aid cupboards or stock rooms. Anyone looking for a powder-free latex alternative with a different grip surface will find it in the Gentle Skin Grip from the same product range. The entire latex range can be found under ‘Latex gloves’. Technical details MaterialNatural rubber latex ColourNatural white SurfaceTextured, rolled cuff, ambidextrous, online chlorinated PowderingPowder-free Lengthmin. 240 mm (median) Width by sizeXS < 80 mm, S 80 ± 10 mm, M 95 ± 10 mm, L 110 ± 10 mm, XL > 110 mm Thickness (palm/fingertip)min. 0.11 mm (median) Force at break (before/after ageing)min. 6 N (median) AQL1.5 Packaging100 pieces per pack (120 x 215 x 70 mm), 10 packs per carton (245 x 360 x 225 mm), 54 cartons per pallet Medical device classClass I (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN ISO 21420:2020, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Gentle Skin compact+ latex gloves (size as per variant selection). Can only be ordered by the carton: at least 10 packs (1 carton), then in steps of 10. Individual requirements and procurement service Do you require larger purchase quantities, a different variant from the Gentle Skin range, or advice on latex tolerance within your team? Our procurement service will be happy to support you with the suitable selection.
Unicare Black Latex, Latex gloves, Black, Powder-free, 1,000 pieces (10 x 100 pieces) - S, GS2902
Unigloves Unicare Black Latex gloves are the only latex option in this colour range and therefore differ fundamentally from the nitrile gloves in the Pearl range: they are made from natural latex rather than nitrile and are therefore not latex-free. Unicare is Unigloves’ basic range. The gloves are powder-free, with a micro-textured palm for a secure grip and a rolled cuff. Unicare Black Latex gloves are sold in a carton containing 1,000 pieces (10 boxes of 100 pieces each), in four sizes from S to XL, excluding size XS. Natural latex instead of nitrile: greater thickness, but allergy warning As a natural latex glove, Unicare Black Latex is 0.11 mm (± 0.02 mm) thick on the palm and 0.12 mm (± 0.02 mm) at the fingertips, thicker than the nitrile gloves in the Pearl range, which results in a more robust feel. As natural latex contains the allergen natural rubber latex, this glove is not suitable for people with a known latex allergy (Type I); in such cases, a nitrile glove from the Pearl range is a suitable latex-free alternative. The median force at break is at least 6.0 N both before and after artificial ageing, whilst the AQL value in the watertightness test is 1.5. Chemical protection according to EN 374, Category III, Type B Unicare Black Latex is tested according to EN 374, Category III, Type B; this is a different protection class to the Type C classification of the nitrile Pearl gloves in this range. In addition, the glove provides protection against viruses according to EN ISO 374-5. It complies with EN 455 (Parts 1 to 4) for medical disposable gloves as well as EN ISO 21420, and is manufactured under a quality management system certified according to EN ISO 13485:2016. As personal protective equipment, the glove is classified in PPE Category III. Information on food contact suitability and specific permeation values for individual chemicals is available on request. Typical applications Unicare Black Latex is suitable for applications where the elasticity of natural latex is valued and there are no known latex allergies amongst staff: Applications where the high elasticity of natural latex is preferred over nitrile, for example for work requiring a particularly precise fit Cleaning and disinfection tasks within the scope of the tested EN 374 Category III, Type B Businesses that specifically use black as a contrasting colour to improve the visibility of light-coloured residues Areas of use where there are no known latex allergies amongst staff As this is a natural latex glove, it is worth briefly checking with the team before ordering to see if there are any known latex allergies. If this is the case, the Black Pearl from the nitrile range offers a colour-matched, latex-free alternative. Packaging for ongoing requirements The carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, is suitable for businesses with regular consumption, such as cleaning services, workshops or medical practices with multiple workstations. The individual boxes of 100 can be placed at different workstations independently of one another without having to open the entire carton, which keeps the remaining boxes sealed and ready to hand for longer. Unicare in the Unigloves range Unicare is Unigloves’ basic range, comprising latex gloves for everyday use. Anyone looking for a latex alternative with a different product focus will find it in the Select Black range, also black and powder-free, from another Unigloves product line. For latex-free applications, a nitrile glove from the Pearl range is a suitable alternative, such as the colour-coordinated Black Pearl. Technical details MaterialNatural latex ColourBlack Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Thickness (palm)0.11 mm (± 0.02 mm) Thickness at fingertip0.12 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 CharacteristicsPowder-free, micro-textured palm, rolled cuff StandardsEN ISO 21420, EN 455 (Parts 1-4), EN 374 (Category III, Type B), EN ISO 374-5 Quality management systemEN ISO 13485:2016 PPE categoryIII (EU Regulation 2016/425) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Unicare Black Latex gloves (size as per variant selection, available in S to XL) Individual requirements and procurement service Do you require a different size, a latex-free alternative from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€6.10 / 100 piece(s))
Unigloves Select Black 300 Latex Gloves, black, extra-long, powder-free, size M, 24303
Long tattoo sessions and kitchen work involving frequent contact with washing-up water have one thing in common: if the cuff is too short, liquid can quickly seep into the glove at the wrist. Unigloves has developed the Select Black 300 specifically for this scenario, described by the manufacturer itself as ‘Der lange Kreative’, the extended version of the black disposable latex glove, the Select Black. With a cuff length of 295 mm (± 5 mm), around 55 mm longer than the standard version, it provides additional protection for the wrist and part of the forearm. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Extended cuff and good-grip, chlorinated surface The name derives from the length: the technical data sheet specifies 295 ± 5 mm for size XS, and at least 295 ± 5 mm for sizes S to XL; the model designation ‘300’ rounds off this figure. At 0.16 ± 0.03 mm, the palm is noticeably thicker than on the standard Select Black version (0.11 mm), which provides additional durability during prolonged contact with water or cleaning agents; the same applies to the fingertips, which measure 0.16 ± 0.03 mm. The cuff itself is also documented as being 0.11 ± 0.02 mm thick, a measurement for which no value is given in the data sheet for the shorter Select Black version. The surface is micro-textured on the fingertips and palm for a secure grip and chlorinated on the outside to make it easier to put on and take off. According to the manufacturer, the glove is also touchscreen-compatible, allowing smartphones or tablets to be operated without removing the gloves, for example for documentation between two work steps. Chemical protection according to EN 374, Category III, Type B, with three tested chemicals Select Black 300 shares the chemical resistance profile of the short version: classified according to EN ISO 374-1 in Category III, Type B, with additional protection against viruses, fungi and bacteria according to EN ISO 374-5. Three test chemicals are specified with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation rate of minus 55.11 %, 30 % hydrogen peroxide with a level of 2 and a degradation rate of plus 9.7 %, and 37 % formaldehyde with a level of 2 and a degradation rate of minus 12.4 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies. Tested according to EN 455, PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. In the 1,000 ml water-tightness test, the glove achieves a high level of impermeability with an AQL value of 1.5; it is also food-safe. The data sheet does not specify a particular medical device class. Choosing the right size With Select Black 300, too, the manufacturer assigns a numerical glove size to each standard size, ranging from 5 to 6 for XS to 9 to 10 for XL, identical to the short Select Black version. SizeManufacturer’s item no.Glove sizeWidthLength XS243015-675 mm (± 5 mm)295 mm (± 5 mm) S243026-780 mm (± 10 mm)≥ 295 mm (± 5 mm) M243037-895 mm (± 10 mm)≥ 295 mm (± 5 mm) L243048-9110 mm (± 10 mm)≥ 295 mm (± 5 mm) XL243059-10≥ 110 mm≥ 295 mm (± 5 mm) Select Black 300 or Select Black: which length is right for you? Select Black 300 and the short Select Black share the same colour, chemical resistance profile and certification, but differ significantly in length and material thickness. For standard applications in the laboratory or at the treatment station, the short version with a cuff length of around 240 mm is sufficient. As soon as splash water, cleaning agents or frequent contact with liquids occur at the wrist, such as when washing up in a catering kitchen or during long tattoo sessions involving frequent hand contact with ink and disinfectant, the 300 version offers more robust protection with its cuff that is around 55 mm longer and its thicker palm. For those with a natural latex allergy, a nitrile glove such as Black Pearl from the nitrile glove range is the suitable alternative to both Select Black variants. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The extended cuff of the Select Black 300 makes a practical difference above all in these areas of use: Tattoo and piercing studios during long sessions involving repeated contact with ink, disinfectants and skin contact surfaces Catering and food processing, particularly when washing up and carrying out cleaning tasks involving splashing water on the wrist (food contact suitability according to the manufacturer) Laboratory work with an increased risk of splashes, where the extra cuff length offers a clear advantage over standard gloves Where the standard length is sufficient, the short Select Black is the more economical choice; see the distinction above. Assessing requirements correctly: from the carton to the shift The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently at different workstations. In a catering kitchen with an estimated consumption of 15 gloves per dishwashing staff member per shift, one box of 100 covers around 6 to 7 shifts; a whole carton therefore covers around 65 shifts. In a tattoo studio, assuming 3 to 5 pairs of gloves per longer session (changed during breaks), one box of 50 pairs is sufficient for around 10 to 16 sessions, whilst a full carton covers 100 to 165 sessions. These are sold exclusively as whole cartons; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton How long is the cuff really, 295 or 300 mm?According to the data sheet, it measures 295 mm (± 5 mm); the model designation ‘300’ is the manufacturer’s rounded marketing figure. Who did Unigloves develop this glove for?Under the name suffix ‘Der lange Kreative’, the manufacturer explicitly lists tattoo artists, as well as the catering and food processing sectors, as the target groups for the extended cuff. Is Select Black 300 suitable for people with a latex allergy?No, the glove is made of natural latex. If you have a known natural latex allergy, a nitrile glove such as Black Pearl is suitable. How resistant is the glove to chemicals?Three test chemicals are listed with numerical values: 40 % caustic soda (Level 6, minus 55.11 %), hydrogen peroxide 30 % (Level 2, plus 9.7 %) and formaldehyde 37 % (Level 2, minus 12.4 %), identical to the short Select Black version. How does the Select Black 300 differ from the short Select Black?Primarily in length (295 mm instead of 240 mm) and material thickness (0.16 mm instead of 0.11 mm on the palm). The colour, certification and chemical resistance profile are identical. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Technical details MaterialLatex (natural rubber) ColourBlack, matt Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length295 mm (± 5 mm), size XS 295 mm, sizes S to XL at least 295 mm Width per sizeXS 75 mm (± 5 mm), S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL ≥ 110 mm Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palm0.16 ± 0.03 mm Fingertip thickness0.16 ± 0.03 mm Cuff thickness0.11 ± 0.02 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)40 % caustic soda, Level 6 (-55.11 %), 30 % hydrogen peroxide, Level 2 (+9.7 %), 37 % formaldehyde, Level 2 (-12.4 %) PropertiesPowder-free, thiuram-free, micro-textured, chlorinated, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type B), EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Select Black 300 latex gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, the short Select Black for standard applications, or a latex-free nitrile alternative from the Unigloves Pearl range for your studio or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€10.10 / 100 piece(s))
Unigloves Select Black Latex Gloves, black, powder-free (sizes XS to XL), M, GT2403
Anyone who works with their hands all day, whether at the tattoo chair, in the laboratory or in the kitchen, needs a glove that doesn’t compromise tactile sensitivity and grip for the sake of safety. The manufacturer specifically markets the Unigloves Select Black latex gloves, under the name suffix ‘Der Kreative’ (The Creative One), for tattoo artists and other precision trades where dexterity is crucial to the quality of the work. Unlike the nitrile gloves in the Pearl range, Select Black is made from natural latex with micro-textured fingertips and palms for extra grip, a rolled cuff and a matt black finish. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Latex instead of nitrile: greater elasticity, a different situation regarding allergies Natural latex moulds more closely to the hand than nitrile and is therefore perceived by many users as more comfortable during prolonged wear, one reason why Unigloves specifically targets this range at tattoo artists who work for hours on end. According to the data sheet, the palm has a thickness of 0.11 ± 0.03 mm, and the fingertips 0.13 ± 0.03 mm, both measured as a single layer. According to the manufacturer, the glove is thiuram-free, meaning it contains no vulcanisation accelerators, which frequently trigger contact allergies. However, unlike the fully synthetic nitrile gloves in the Pearl range, Select Black, being a natural rubber product, does contain proteins: for staff with a natural latex allergy, a nitrile glove such as the Unigloves Black Pearl is the more suitable choice, not Select Black. Chemical protection according to EN 374, Category III, Type B, tested against three chemicals Select Black is classified as a chemical protective glove according to EN ISO 374-1, Category III, Type B, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. The data sheet lists three test chemicals with numerical values for this glove: 40 % caustic soda achieves permeation level 6 with a degradation rate of minus 55.11 %, 30 % hydrogen peroxide at Level 2 with a degradation rate of plus 9.7 %, and 37 % formaldehyde at Level 2 with a degradation rate of minus 12.4 %. For other chemicals, the manufacturer’s product-specific chemical resistance table continues to apply. Tested according to EN 455, PPE Category III The glove complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. In the 1,000 ml water-tightness test, the glove achieves a high level of watertightness with an AQL value of 1.5; it is also food-safe. The data sheet does not specify a particular medical device class. Choosing the right size The manufacturer also assigns a numerical glove size to each Select Black size, ranging from 5 to 6 for XS to 9 to 10 for XL. These figures are based on hand circumference in inches, measured at the widest point of the hand excluding the thumb, and help when comparing sizes with other PPE gloves. SizeManufacturer’s item no.Glove sizeWidthLength XSGT24015-675 mm (± 5 mm)≥ 240 mm SGT24026-785 mm (± 5 mm)≥ 240 mm MGT24037-895 mm (± 5 mm)≥ 240 mm LGT24048-9105 mm (± 5 mm)≥ 240 mm XLGT24059-10120 mm (± 10 mm)≥ 240 mm Select Black or Select Black 300: choosing the right length Within the black Unigloves latex range, the two Select Black variants differ primarily in their length. The Select Black described here, with a standard length (≥ 240 mm), is suitable for most applications in laboratories, catering and studios. Those who need additional protection on the wrist and forearm, for example, during longer tattoo sessions or when washing up and cleaning in the kitchen, will find Select Black 300, with a cuff length of around 295 mm, to be a suitable addition. It offers the same colour and the same chemical protection profile, but with a thicker palm (0.16 instead of 0.11 mm). For staff with a natural latex allergy, switching to a nitrile colour such as Black Pearl from the nitrile glove range is the right alternative. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The combination of elasticity, grip and an unobtrusive black appearance makes Select Black particularly attractive for tasks where dexterity is paramount: Tattoo and piercing studios, for which the manufacturer has specifically developed the range Cosmetic and beauty treatments requiring a high degree of tactile sensitivity Catering and food processing (food contact suitability according to the manufacturer) Laboratory work with a documented need for chemical resistance to caustic soda, hydrogen peroxide or formaldehyde, provided there is no natural latex allergy The following applies to all these sectors: where latex is ruled out due to allergies, the nitrile Pearl range offers a synthetic alternative with the same basic features of textured fingertips and a rolled cuff. Assessing requirements correctly: from the carton to the session The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. In a tattoo or piercing studio, assuming 2 to 4 pairs of gloves per client appointment (changed during breaks or if soiled), a box of 100 pieces, i.e. 50 pairs, covers approximately 12 to 25 appointments, whilst a whole carton covers 125 to 250 appointments. In a laboratory or catering establishment, assuming a consumption of 10 gloves per workstation per day, one box lasts for approximately two working weeks, whilst a whole carton lasts for around 20 working weeks. The product is sold exclusively in whole cartons; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Is Select Black suitable for people with a latex allergy?No. The glove is made of natural latex and therefore contains proteins, unlike the fully synthetic nitrile gloves in the Pearl range. If you have a known natural latex allergy, a nitrile glove is suitable. What has Select Black been specifically developed for?The manufacturer positions the range under the name suffix ‘Der Kreative’ (The Creative One), specifically for tattoo artists and other precision professions with high demands on tactile sensitivity and grip. How resistant is the glove to chemicals?The data sheet lists three test chemicals with numerical values: 40 % caustic soda (Level 6, minus 55.11 % degradation), 30 % hydrogen peroxide (Level 2, plus 9.7 %) and 37 % formaldehyde (Level 2, minus 12.4 %). The data sheet does not specify breakthrough times in minutes, only the permeation levels. How does Select Black differ from Select Black 300?Mainly in terms of length: Select Black has a cuff of at least 240 mm, whilst Select Black 300 has a cuff of around 295 mm for additional wrist protection, as well as a thicker palm (0.16 mm instead of 0.11 mm). The colour, certification and chemical profile are identical for both. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialLatex (natural rubber) ColourBlack Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palm0.11 ± 0.03 mm Fingertip thickness0.13 ± 0.03 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)40 % caustic soda, Level 6 (-55.11 %), 30 % hydrogen peroxide, Level 2 (+9.7 %), 37 % formaldehyde, Level 2 (-12.4 %) FeaturesPowder-free, thiuram-free, micro-textured fingertips and palm, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type B), EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Select Black latex gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, the extra-long Select Black 300, or a latex-free nitrile alternative from the Unigloves Pearl range for your studio or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€8.50 / 100 piece(s))
L&R Sentina Ambidextrous Latex Examination Gloves, powder-free, 100 pcs. – M
Tried-and-tested latex quality for medical precision The Sentina® Ambidextrous examination gloves from Lohmann & Rauscher (L&R) offer the classic elasticity and good tactile sensitivity of natural latex. They fit like a second skin, enabling work with less fatigue even over extended periods. Thanks to the micro-textured fingertips, they provide a secure grip, even when handling damp instruments or liquids. Powder-free with a rolled cuff These gloves are powder-free to reduce the risk of skin irritation and the inhalation of powder particles. Thanks to a synthetic inner coating, they can still be put on quickly and easily. The sturdy rolled cuff at the wrist provides additional support and reduces the risk of the glove slipping down during treatment or care. Versatile range of applications The Sentina® Ambidextrous is classified as a Class I medical device (tested according to EN 455) and as personal protective equipment (PPE Category III). It is suited for use in hospitals, doctors’ surgeries and in elderly care and nursing. Thanks to its durable material properties, it offers protection against contamination and chemicals (limited protective effect in accordance with EN ISO 374-1 and EN ISO 374-5). Technical details Material: Natural latex (natural white) Type: Powder-free, non-sterile Fit: Suitable for both hands (ambidextrous) Surface: Textured fingertips Inner surface: Synthetic coating (easy to put on) Quality: AQL 1.5 Standards: EN 455 (1–4), EN ISO 374-1, EN ISO 374-5, EN ISO 21420:2020 Classification: Class I medical device, PPE Category III Length: min. 240 mm Scope of delivery 1 box of L&R Sentina® Ambidextrous (contents: 100 pieces) Note: Due to weight considerations, size XL contains 90 pieces. Individual requirements & procurement service Are you looking for a latex-free alternative (e.g. Sentina Nitril) or sterile surgical gloves? We can help you choose the right gloves for your facility. Use our procurement service for bulk enquiries and alternative options.