Nitrile gloves
Nitrile gloves are tear-resistant, chemical-resistant and protein-free. They are the alternative for anyone who wants or needs to avoid latex. LT Laborhandel offers nitrile examination and protective gloves from Meditrade and Unigloves in a wide range of colours and thicknesses, some with PPE Class III certification for enhanced chemical resistance, suitable for laboratories, food processing and industry. Prefer latex? Then take a look at the latex gloves category. Back to the overview: Disposable gloves.
Meditrade Nitril Black Examination Gloves, black (100 pcs.), M, 1284M
Black nitrile gloves are widely used in the tattoo and beauty industries, as the dark colour gives a professional appearance and any ink or pigment residue is not immediately noticeable. Meditrade Nitril Black examination gloves are powder-free, latex-free, disposable nitrile gloves with a micro-textured, elastic and tear-resistant surface, available in sizes S, M, L and XL, each in packs of 100. Latex-free for sensitive skin The gloves are completely latex-free and are therefore a suitable choice for staff with a diagnosed type 1 latex allergy, regardless of the area of application. The force at break is 6 N, tested to an AQL value of 1.5, the standard sampling inspection level for the leak-tightness of disposable gloves. Thickness varies by zone The Nitril Black gloves feature varying thicknesses across different zones: the thickness on the palm is 0.07 mm (± 0.02 mm), on the fingertips 0.10 mm (± 0.02 mm) for added grip on the fingertips, and 0.05 mm (± 0.02 mm) at the cuff for easier donning. This variation in thickness is common in nitrile gloves, as the fingertips are subject to the highest mechanical stress, whilst the wrist primarily requires elasticity. Nitrile as the material of choice Nitrile is a synthetic rubber which, unlike natural latex, does not contain the allergy-triggering latex proteins, whilst offering greater puncture and chemical resistance than latex. For businesses that avoid natural latex entirely for hygiene or compliance reasons, nitrile is therefore the obvious alternative to traditional latex gloves. Furthermore, nitrile retains its shape well even after prolonged wear, which noticeably enhances comfort throughout the entire shift in professions where gloves are changed frequently throughout the day. Tested according to EN 455 and EN ISO 374 Nitril Black complies with EN 455 (Parts 1 to 4) for medical disposable gloves, as well as the test standards of the EN ISO 374 series (Parts 1, 2, 4 and 5) for protective gloves against microorganisms and chemicals. In addition, the data sheet lists EN 16523-1 for determining resistance to chemical permeation. The manufacturer also classifies them as food-safe, which is relevant, for example, for inspection tasks in food processing or the catering industry. EN 16523-1 specifies how long it takes and to what extent a chemical penetrates the glove material, providing an additional indicator alongside the pure microorganism barrier as defined by EN ISO 374. Selection guide: choosing the right size The size range starts at S and goes through M and L to XL; there is no XS size for this model. We can provide width and length measurements on request; when selecting a size, we also recommend comparing it with the size of a disposable glove you already own that fits well. SizeManufacturer’s item no.EAN S1284S4250016405078 M1284M4250016405085 L1284L4250016405092 XL1284XL4250016405108 Differentiation within the nitrile range Several other Meditrade nitrile gloves with the same thickness gradation on the palm, fingertips and cuff are available alongside the Nitril Black. For those looking for a light-coloured glove for food processing rather than the dark contrasting colour, the Meditrade Nitril 3000 in white offers an alternative with identical wall thickness and additionally documented carton and pallet dimensions. For businesses using colour-coding by station or shift, the Meditrade Nitril Viola in purple is also available. Anyone requiring a variant tested against blood-borne pathogens with a wider size range up to XXL will find this in the Meditrade Nitril NextGen. Use and disposal We can provide details of storage conditions and shelf life on request. According to the manufacturer, the glove is non-sterile and intended for single use; it can be worn on either hand. After use, disposable gloves are usually disposed of as commercial waste; contaminated gloves are disposed of separately, depending on internal hazardous substances regulations. Typical applications The black colour of these nitrile gloves makes them suitable for a variety of sectors and applications: Tattoo and beauty salons, where black is an established, professional-looking colour Catering and event venues, to ensure a uniform, smart appearance for staff Laboratory and examination work, where light-coloured powders, tablets or crystals are more visible on dark gloves than on light-coloured ones General examination and routine tasks where a latex-free, food-safe disposable glove is required For example, when portioning powders or granules in the laboratory, it is immediately apparent whether any residue has become trapped on the dark glove, a contrast that a natural-coloured glove does not provide. Assessing your needs correctly: the pack of 100 for everyday use Nitril Black is sold in packs of 100 per size. A simple rough calculation can help with demand planning: at a rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. For businesses with higher consumption of several sizes simultaneously, it is advisable to stock several packs of the relevant sizes straight away, so that no workstation runs out of a particular size. The AQL value of 1.5 indicates the maximum number of defective gloves per batch that are tolerated within the framework of statistical sampling; a lower value indicates a stricter inspection. If you stock several sizes at the same time, you can distinguish between the packs of 100 at a glance using the manufacturer’s item number, without having to open the individual packs first. Frequently asked questions about Nitril Black Is Nitril Black latex-free?Yes, the glove is made entirely from nitrile and is therefore latex-free. Is Nitril Black sterile?No, according to the manufacturer, it is a non-sterile, single-use glove. How thick is the glove?The thickness is 0.07 mm on the palm, 0.10 mm at the fingertips and 0.05 mm at the cuff, each with a tolerance of ± 0.02 mm. What sizes are available?S, M, L and XL. There is no XS size for this model. Is the glove food-safe?Yes, the manufacturer classifies it as food-safe. What is the medical device class and PPE category of the glove?According to the data sheet, the glove is a class I medical device (Regulation (EU) 2017/745) and category III PPE (Regulation (EU) 2016/425). Technical details MaterialNitrile ColourBlack SurfaceMicro-textured, elastic, tear-resistant Thickness (palm)0.07 mm ± 0.02 mm Thickness at fingertips0.10 mm ± 0.02 mm Cuff thickness0.05 mm ± 0.02 mm Force at break6 N AQL1.5 PropertiesPowder-free, latex-free, food-safe, non-sterile, ambidextrous StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1 Scope of delivery 1 pack = 100 Meditrade Nitril Black examination gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities or a different colour from the Meditrade nitrile range? Our procurement service will be happy to support you with the suitable selection.
Meditrade Nitril NextGen Examination Gloves, blue, 100 pcs., size L, 1283L
Some applications require more than the basic protection typically offered by nitrile gloves, for example where, in addition to protection against contamination, the penetration of blood-borne pathogens must also be reliably prevented. Meditrade Nitril NextGen examination gloves are available in six sizes from XS to XXL and are additionally tested to ASTM F 1671. Powder-free, latex-free and available in blue, each pack containing 100 gloves. Latex-free and tested against blood-borne pathogens According to the manufacturer, the NextGen is produced without natural rubber latex and is therefore suitable for organisations that consistently rely on latex-free personal protective equipment. Beyond the series of standards customary for nitrile gloves, EN 455 and EN ISO 374, it is also tested according to ASTM F 1671 for the penetration of blood-borne pathogens, supplemented by EN 16523 for chemical permeation and DIN EN ISO 374-5 for protection against microorganisms. This additional testing distinguishes the NextGen from the simpler nitrile variants in the range. Thickness at the palm, shaft and fingertips According to the data sheet, the thickness at the palm is 0.07 mm (± 0.02 mm), at the fingertips 0.10 mm (± 0.02 mm) and on the shaft also 0.07 mm (± 0.02 mm), ensuring that the cuff area remains mechanically robust, rather than being thinner as is the case with some other nitrile gloves. The median force at break is at least 6.0 N both before and after artificial ageing, tested with an AQL value of 1.5. ASTM F 1671: what the additional test entails ASTM F 1671 tests whether a glove material can withstand the penetration of a bacteriophage, used as a model organism for blood-borne pathogens, under defined pressure. For workplaces with an increased risk of exposure, such as in emergency care or during invasive procedures, such an additional test is an indication of a higher level of protection than that offered by a nitrile glove which has only undergone the basic standards EN 455 and EN ISO 374. Combined with the permeation test according to EN 16523, NextGen thus covers both the microbiological and chemical aspects of the barrier performance. Six sizes from XS to XXL With its XXL size, the NextGen also accommodates particularly large hands. The width ranges from 75 mm (± 5 mm) for XS, through 95 mm (± 10 mm) for M, to at least 115 mm for XXL; the length is at least 240 mm for all sizes. SizeManufacturer’s item no.WidthLength XS1283XS75 mm (± 5 mm)min. 240 mm S1283S80 mm (± 10 mm)min. 240 mm M1283M95 mm (± 10 mm)min. 240 mm L1283L110 mm (± 10 mm)min. 240 mm XL1283XL≥ 110 mmmin. 240 mm XXL1283XXL≥ 115 mmmin. 240 mm Distinction within the nitrile range We offer the NextGen alongside several nitrile gloves in different colours from the same Meditrade range. Whilst the Meditrade Nitril 3000 in white, the Meditrade Nitril Black in black and the Meditrade Nitril Viola in purple all share the same basic formulation with a thickness of 0.07/0.10/0.05 mm, the NextGen is additionally tested to ASTM F 1671 against blood-borne pathogens and is available in size XXL. Those who also require a longer cuff for forearm protection will find this in the Meditrade Nitril X-Long, with a cuff length of 295 mm. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use only. According to the data sheet, they contain dithiocarbamates, which should not be used by anyone with a known hypersensitivity to these substances. After use, the gloves are disposed of as commercial waste or via the organisation’s internal hazardous waste disposal system, depending on the level of contamination. Typical applications The additional testing for blood-borne pathogens and the wide range of sizes make the NextGen an obvious choice for: Examination and care activities with increased requirements for barrier protection against pathogens Organisations that operate strictly latex-free whilst needing to cater for large hand sizes up to XXL Laboratory work involving contact with chemicals for which EN 16523 is documented as the permeation test Food processing, for which the glove is suitable according to the data sheet Teams with widely varying hand sizes who wish to maintain a single order list for all staff For example, in an outpatient clinic or laboratory with a changing workforce, the same type of glove can be stocked for almost every hand size without having to switch to a different product range for particularly large hands. Assessing requirements correctly: from the pack to the carton NextGen is sold in packs of 100 per size. According to the manufacturer, one carton holds 10 packs, i.e. 1,000 gloves, with a pallet containing 72 cartons (carton dimensions 295 x 260 x 250 mm). A simple rough calculation helps with demand planning: at a consumption rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. Where there are several workstations with different hand sizes, including XXL, it is advisable to stock each size separately, as experience shows that demand for XXL is lower, but if stock runs out, it is more difficult to reorder at short notice than the more common medium sizes. Setting a fixed minimum stock level for each size in your own stock management system helps to ensure that even sizes ordered less frequently, such as XS or XXL, are reordered in good time. Frequently asked questions about Nitril NextGen What distinguishes NextGen from other nitrile gloves in the range?It is additionally tested according to ASTM F 1671 for resistance to the penetration of blood-borne pathogens and is also available in size XXL. Is the NextGen latex-free?Yes, according to the manufacturer, it is produced without natural rubber latex. How thick is the glove?The thickness is 0.07 mm on the palm and shaft, and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case. Is the glove sterile?No, according to the data sheet, the NextGen is a non-sterile, single-use glove. What sizes are available?XS, S, M, L, XL and XXL, each with its own width specification as per the data sheet. Can I order individual gloves instead of the whole pack?No, the smallest order unit is a pack of 100 gloves per size. What does the additional ASTM F-1671 test mean in practice?It documents that, in laboratory tests, the glove material withstands the penetration of a model organism for blood-borne pathogens under pressure, in addition to the basic standards EN 455 and EN ISO 374. Technical details MaterialNitrile butadiene rubber (NBR) ColourBlue SurfaceMicro-textured, rolled cuff, suitable for both hands Lengthmin. 240 mm Thickness (palm)0.07 mm ± 0.02 mm Fingertip thickness0.10 mm ± 0.02 mm Thickness of shaft0.07 mm ± 0.02 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces), 72 cartons per pallet FeaturesPowder-free, latex-free, non-sterile, ambidextrous, suitable for food contact Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN ISO 21420:2020, EN 16523, ASTM F 1671, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Nitril NextGen examination gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Meditrade nitrile range, or larger purchase quantities for your business? Our procurement service will be happy to support you with the suitable selection.
Meditrade Nitril 3000 Examination Gloves, white (box of 100), L, 1280L
You don’t always need specialist equipment for your daily use of nitrile gloves. Meditrade Nitril 3000 examination gloves are the standard white nitrile gloves in the Meditrade range available from us; they are powder-free, latex-free and come with fully documented packaging and pallet dimensions for logistics planning. Available in sizes S to XL, each in packs of 100. Latex-free with a tried-and-tested basic formulation The glove is made from nitrile butadiene rubber (NBR) containing the following ingredients: antioxidant, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide and potassium hydroxide; it is free from mercaptobenzothiazole and thiurams and, according to the manufacturer, is not manufactured using natural rubber latex. The textured surface with a rolled cuff ensures a secure grip and makes the gloves easier to put on and take off. Thickness from the cuff to the fingertips According to the data sheet, the thickness at the shaft is 0.05 mm (± 0.02 mm), at the palm 0.07 mm (± 0.02 mm) and at the fingertip 0.10 mm (± 0.02 mm), ensuring that the greatest mechanical stress is absorbed at the fingertips. The force at break is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5. White as a neutral base colour Unlike the coloured variants of the Meditrade nitrile range, Nitril 3000 is available in a neutral white colour, which is regarded as the standard colour for examination gloves in many organisations and is compatible with almost any corporate design or hygiene concept. For organisations with no specific need for colour-coding or additional testing, it is therefore often the obvious first choice before a more specialised variant, such as a contrasting colour or an additionally tested version, is considered. Class I medical device and Category III PPE The Nitril 3000 is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN ISO 374-1, -2, -4 and -5, EN 16523-1 for chemical permeation, EN ISO 21420:2020, and is manufactured under a quality management system certified according to EN ISO 13485:2016. According to the data sheet, it is also suitable for contact with food. Selection guide: choosing the right size In our range, the Nitril 3000 is available in sizes S to XL, with widths ranging from 80 mm (± 10 mm) for size S to over 110 mm for size XL. SizeManufacturer’s item no.WidthLength S1280S80 mm (± 10 mm)min. 240 mm M1280M95 mm (± 10 mm)min. 240 mm L1280L110 mm (± 10 mm)min. 240 mm XL1280XL> 110 mmmin. 240 mm Distinctions within the nitrile range Within our Meditrade nitrile range, the Nitril 3000 is the standard white version with fully documented packaging and pallet dimensions. Anyone looking for the same glove in a dark contrasting colour for tattooing, cosmetic or laboratory work involving light-coloured powders will find the Meditrade Nitril Black, which offers the same range of thicknesses. For businesses using colour-coding, the Meditrade Nitril Viola in purple is also available. If you require a variant that has been additionally tested against blood-borne pathogens and is available in sizes up to XXL, you will find this in the Meditrade Nitril NextGen. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use. According to the information in the data sheet, they contain dithiocarbamates, which should not be used by anyone with a known hypersensitivity to these substances. After use, the gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the degree of contamination. Typical applications As the basic variant of the nitrile range, the Nitril 3000 is suitable for a wide range of applications: General examination and routine tasks in medical practices, laboratories and care settings Food processing and catering, for which the glove is suitable according to the data sheet Businesses that require a light-coloured, neutral glove without the need for additional testing Logistics-intensive businesses that can plan precisely thanks to documented carton and pallet dimensions For example, during incoming goods inspection in food processing, the same type of glove can be used consistently, from sampling right through to packaging checks. A neutral, widely used basic variant is also practical in training and educational contexts, as it is not tied to a specific workstation or colour-coding scheme. Assessing requirements correctly: from the pack to the carton The Nitril 3000 is sold in packs of 100 pieces per size. According to the manufacturer, one carton holds 10 packs, i.e. 1,000 gloves, with a pallet containing 72 cartons (carton dimensions 29.5 x 26.0 x 25.0 cm). A simple rough calculation helps with demand planning: at a consumption rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. For larger businesses with multiple workstations, the carton dimensions can also be used to plan storage logistics directly, for example, how many cartons will fit on a pallet or on a warehouse shelf. This makes capacity planning easier, particularly for larger businesses with their own warehousing, without having to first request the dimensions separately from the manufacturer. Why a basic version can be a sensible choice Not every business requires the additional ASTM F-1671 testing offered by NextGen or colour-coding by workstation. Where the nitrile glove is primarily intended to provide reliable basic protection according to EN 455 and EN ISO 374, with traceable logistics, the Nitril 3000 is an economically obvious choice without compromising on force at break, AQL value or certification compared to the other variants in the range. Frequently asked questions about the Nitril 3000 Is the Nitril 3000 latex-free?Yes, according to the manufacturer, it is produced without natural rubber latex. Is the glove sterile?No, according to the data sheet, the Nitril 3000 is a non-sterile, single-use glove. How thick is the glove?According to the data sheet, 0.05 mm on the shaft, 0.07 mm on the palm and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case. How big is a carton and how many fit on a pallet?A carton holds 1,000 gloves (10 packs of 100 each) and measures 29.5 x 26.0 x 25.0 cm; a pallet holds 72 cartons. Are the gloves suitable for food contact?Yes, according to the data sheet, they are suitable for contact with food. Can I order individual gloves instead of the whole pack?No, the pack of 100 pieces per size is the smallest unit sold. How does the Nitril 3000 differ from the coloured variants in the range?It shares the same material and thickness grades as Nitril Black and Nitril Viola, but is the only variant in neutral white without an additional colour-coding function. Technical details MaterialNitrile butadiene rubber (NBR) ColourWhite SurfaceTextured, rolled cuff, suitable for both hands Lengthmin. 240 mm Thickness (palm)0.07 mm ± 0.02 mm Fingertip thickness0.10 mm ± 0.02 mm Thickness of shaft0.05 mm ± 0.02 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces), 72 cartons per pallet FeaturesPowder-free, latex-free, non-sterile, ambidextrous, suitable for food contact Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN ISO 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, EN ISO 13485:2016 Scope of delivery 1 pack = 100 Meditrade Nitril 3000 examination gloves (size as per variant selection) Individual requirements and procurement service Do you require larger purchase quantities, a different colour from the Meditrade nitrile range, or assistance with warehouse logistics? Our procurement service will be happy to support you with the suitable selection.
Meditrade Nitril Viola Nitrile Examination and Protective Gloves, Purple, Powder-free, Size M, 1285M
As well as black, white and blue, a bold colour such as violet often ensures the quickest recognition in day-to-day work, whether at a specific station, in a particular treatment room or simply to stand out visually from other glove colours. Meditrade Nitril Viola nitrile examination and protective gloves are powder-free, latex-free, disposable nitrile gloves in violet, available in sizes XS to XL, sold in cartons of 1,000 (10 packs of 100). Latex-free with an additional polymer coating The glove is made from nitrile butadiene rubber (NBR) containing the following ingredients: antioxidant, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide, potassium hydroxide and colour pigment, supplemented by an additional polymer coating. It is free from mercaptobenzothiazole and thiurams. Thickness from the cuff to the fingertip According to the data sheet, the thickness at the cuff is 0.05 mm (± 0.02 mm), at the palm 0.07 mm (± 0.02 mm) and at the fingertip 0.10 mm (± 0.02 mm), the same gradation as for the other colours in the nitrile range. The force at break is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5. The effect of the additional polymer coating According to the list of ingredients, the Nitril Viola has an additional polymer coating. In nitrile gloves, such a surface coating is usually intended to make the gloves easier to put on and to influence surface friction without altering the thickness of the underlying material. As regards the barrier performance itself, the key parameters such as thickness, force at break and AQL remain identical to those of the other colours in the range. Class I medical device and Category III PPE The Nitril Viola is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN 374-1, -2, -4 and -5, EN 16523-1 for chemical permeation, EN ISO 21420 and ASTM F 1671 (ISO 16604) for the penetration of blood-borne pathogens, and is manufactured under a quality management system certified according to EN ISO 13485:2016. Selection guide: choosing the right size Sizes range from XS to XL, with widths from under 80 mm for XS to over 110 mm for XL. SizeManufacturer’s item no.WidthLength XS1285XS< 80 mmmin. 240 mm S1285S80 mm (± 10 mm)min. 240 mm M1285M95 mm (± 10 mm)min. 240 mm L1285L110 mm (± 10 mm)min. 240 mm XL1285XL> 110 mmmin. 240 mm Differentiation within the nitrile range Within our Meditrade nitrile range, the Nitril Viola shares the same thickness grades as the white Meditrade Nitril 3000 and the black Meditrade Nitril Black, but differs through its additional polymer coating and the ASTM F 1671 testing for protection against blood-borne pathogens. Those requiring an even wider range of sizes up to XXL will find this in the Meditrade Nitril NextGen. For organisations that also prioritise biodegradability, the Meditrade Nitril GreenGen offers a green variant that has been tested according to ASTM D5526 and D5511. Use, storage, shelf life and disposal According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use. After use, the gloves are disposed of as commercial waste or via the internal hazardous waste disposal system, depending on the level of contamination. Typical applications The violet colour is suitable wherever a clear visual distinction from other glove colours is required: Facilities with multiple colours of nitrile gloves, where violet is specifically allocated to a particular station or shift Examination and care activities with additional requirements for barrier protection against blood-borne pathogens Laboratory and routine tasks where a latex-free, visually distinctive glove is required Training and educational settings where a striking colour is intended to draw attention specifically to a particular exercise or station For example, in a workplace using several colours from the nitrile range, it is possible to see at a glance which station or shift is currently working with the violet colour, without the colour presenting any technical disadvantages. The additional ASTM F 1671 test also makes the colour suitable for areas with an increased risk of exposure, where a higher level of barrier protection is required anyway. Violet as part of a wider colour family Violet is also available in the Unigloves Pearl range. Anyone already working with a colour-coded system should therefore decide in advance whether violet should be used within the nitrile family or as a standalone colour across multiple glove types, in order to avoid confusion between different material qualities. As latex and nitrile gloves have different protective properties and allergy risks, a single colour should not be used to represent both material groups simultaneously without clear internal guidelines. Assessing requirements correctly: from the carton to the rotation routine Nitril Viola is sold exclusively in cartons containing 1,000 gloves per size, divided into 10 packs of 100 each, which can be made available independently at different workstations without opening the entire carton. A simple rough calculation helps with demand planning: assuming a consumption of 10 gloves per workstation per day, a pack of 100 covers around two working weeks, whilst the whole carton covers around 20 working weeks. If consumption is higher, at 30 gloves per workstation per day, one pack will last for around three to four working days, whilst the carton will last for a good six to seven working weeks. For businesses with multiple workstations, the same calculation can be multiplied by the number of workstations to roughly estimate requirements for a specific period. Individual packs cannot be selected separately during the ordering process, even though they can be opened and used independently of one another in the workplace. Frequently asked questions about Nitril Viola Are Nitril Viola gloves latex-free?Yes, according to the data sheet the glove is latex-free. It is made of nitrile butadiene rubber (NBR) with an additional polymer coating. What is the glove’s medical device class and PPE category?Medical device Class I in accordance with Regulation (EU) 2017/745 and Personal Protective Equipment Category III in accordance with Regulation (EU) 2016/425. How thick is the glove?The thickness is 0.05 mm on the cuff, 0.07 mm on the palm and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case. Has the glove been tested against blood-borne pathogens?Yes. According to the data sheet, it was tested according to ASTM F 1671 (ISO 16604). Are the gloves sterile?No, they are non-sterile, single-use gloves. Can I order a single pack of 100 instead of the whole carton?No, the product is sold exclusively in cartons containing 1,000 pieces per size (10 packs of 100 pieces each). What distinguishes the polymer coating from the other nitrile colours?It primarily affects the surface properties; the core specifications such as thickness and force at break remain identical to those of the other colours. Technical details MaterialNitrile butadiene rubber (NBR) with polymer coating ColourViolet SurfaceMicro-roughened, rolled cuff Lengthmin. 240 mm Thickness (palm)0.07 mm ± 0.02 mm Thickness (fingertip)0.10 mm ± 0.02 mm Thickness (cuff)0.05 mm ± 0.02 mm Force at break (before/after ageing)min. 6 N AQL1.5 Packaging100 pieces per pack, 10 packs per carton (1,000 pieces in total) FeaturesPowder-free, latex-free, non-sterile, ambidextrous, free from mercaptobenzothiazole and thiurams Medical device classI (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Shelf life3 or 5 years; store in a cool, dry place; protect from direct sunlight StandardsEN 455-1/-2/-3/-4, EN 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420, ASTM F 1671 (ISO 16604), EN ISO 13485:2016 Scope of delivery 1 carton = 10 packs of 100 pieces each = 1,000 pieces of Meditrade Nitril Viola nitrile examination and protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities or a different colour from the Meditrade nitrile range for your colour-coding? Our procurement service will be happy to assist you in making a suitable selection.
Content: 1000 piece(s) (€3.90 / 100 piece(s))
Unigloves Green Pearl Nitrile Gloves, Green, Powder-free, Size M, GP0043
Anyone who works in a workplace where several Pearl colours are used will be familiar with the problem: at first glance, every colour looks similar, but not every data sheet is equally comprehensive. With Unigloves Green Pearl nitrile gloves, you can check this straight away, as green is one of the few colours in the Pearl range for which the manufacturer specifies all three material thickness measurement points, the palm, fingertips and cuff, individually, rather than just one. These low-powder, latex-free gloves, made from fully dipped nitrile, feature textured fingertips for a secure grip and a rolled cuff that makes them easier to put on. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Low-powder rather than powder-free: a departure from the other Pearl colours Unlike most colours in the Pearl range, which are marketed as powder-free, the Green Pearl data sheet states a powder residue of less than 2 mg per glove and describes the product as ‘low-powder’, not powder-free. For most applications, this difference has no practical significance; however, for businesses with strict powder-avoidance policies, such as in cleanrooms, it is worth checking this specification before ordering. According to the data sheet, the glove is nevertheless latex-free and protein-free; however, unlike the other Pearl colours in our range, there is no indication that it is thiuram-free in the specification list. The material thickness is documented at all three measurement points: palm at least 0.06 mm, fingertips at least 0.08 mm, cuff at least 0.05 mm, each measured as a single layer. The median force at break is at least 6.0 N both before and after artificial ageing. Chemical protection according to EN 374, Category III, Type C Green Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C. Against 40 % sodium hydroxide solution, a permeation level of 6 was determined according to EN 374-4, with a degradation rate of minus 78.9 %, significantly higher than for most other Pearl colours, which are predominantly around minus 5.3 %. Both values achieve the same permeation level 6; the difference lies solely in the degradation rate. For other chemicals, the manufacturer’s product-specific chemical resistance table applies. Tested according to EN 455 Green Pearl complies with EN 455 (Parts 1 to 4) for single-use medical gloves. The type examination according to Modules B and C2 of the PPE Regulation (EU) 2016/425 was carried out by CCQS Certification Services Limited (No. 2834), and production is certified to DIN EN ISO 13485. According to the data sheet, the glove is classified as personal protective equipment in Category III (EN 374 CAT III, Type C). An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer. Choosing the right size The manufacturer also assigns a numerical glove size to each Green Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00415-6≥ 80 mm≥ 240 mm SGP00426-780 mm (± 10 mm)≥ 240 mm MGP00437-895 mm (± 10 mm)≥ 240 mm LGP00448-9110 mm (± 10 mm)≥ 240 mm XLGP00459-10≥ 110 mm≥ 240 mm Green in the twelve-colour Pearl range Green Pearl is one of twelve colours in the Unigloves Pearl range available from us. Those looking for a dark contrasting colour for cleanliness checks will find it in Black Pearl, whilst those preferring a similarly cool but completely powder-free colour will find it in Cobalt Pearl or the classic Blue Pearl. All colours share the same basic construction of fully-dipped nitrile with textured fingertips and a rolled cuff; however, according to their respective data sheets, they differ in details such as powdering and material thickness. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The green colour is suitable for work areas that are to be distinguished from other workstations in the colour-coding system: Laboratories and doctors’ surgeries that use green as the standard colour for general examinations and laboratory work Food processing (food-safe according to the manufacturer) Businesses using multiple Unigloves Pearl colours, where green is specifically used as a base colour alongside more striking signal colours for specialised areas Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III This means that in a facility with colour-coded workstations, it is immediately clear at a glance which work area uses green, whilst other colours from the Pearl range are reserved for exceptions or special processes. Assessing requirements correctly: from the carton to the change routine The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. A rough calculation can help with demand planning for a workstation using green gloves throughout: assuming a consumption of 12 gloves per workstation per day, one box of 100 pieces covers around 8 working days, whilst a whole carton covers approximately 16 weeks. Where there are several workstations with the same colour code, this calculation can be multiplied by the number of workstations to estimate the total requirement for a specific period and to reorder in good time. Sales are exclusively by the full carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Is Green Pearl powder-free?Not quite; the data sheet lists the product as low-powder, with a powder residue of less than 2 mg per glove, rather than powder-free like most other Pearl colours. Which notified body is stated for the glove?According to the manufacturer, the notified body is CCQS Certification Services Limited (No. 2834). How resistant is the glove to chemicals?Against 40 % caustic soda, permeation level 6 was determined with a degradation of minus 78.9 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. Are the palm, fingertips and cuff fully documented for Green Pearl?Yes, Green Pearl is one of the few Pearl colours for which all three measurement points are specified with values in the data sheet: palm at least 0.06 mm, fingertips at least 0.08 mm, cuff at least 0.05 mm. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourGreen Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS ≥ 80 mm, S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL ≥ 110 mm Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness (palm)min. 0.06 mm Fingertip thicknessmin. 0.08 mm Cuff thicknessmin. 0.05 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -78.9 % PropertiesLow-powder (< 2 mg/glove), latex-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420:2020, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4 PPE CategoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS Certification Services Limited (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Green Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Meditrade Nitrile GreenGen Examination Gloves, green, carton (1,000 pieces), L, 1293L
At a time when procurement guidelines are increasingly taking the environmental footprint of consumables into account, Meditrade’s Nitril GreenGen examination gloves offer a viable option without compromising on protection or ease of use. The powder-free, disposable glove comes in a striking green colour; according to the manufacturer, it has been tested for biodegradability and is available in cartons of 1,000 in sizes XS to XL. Biodegradable according to the ASTM standard Disposable gloves are disposed of in large quantities after use, a factor that is now taken into account in procurement decisions at many businesses. According to the manufacturer, the GreenGen nitrile glove has been tested for biodegradability according to ASTM D5526 (accelerated degradation test under landfill conditions) and ASTM D5511 (anaerobic digestion). For organisations that are increasingly aligning their procurement with sustainability criteria, this provides a documented basis that goes beyond a mere marketing claim, without requiring any compromise on the standard testing criteria for examination gloves. Thickness from the palm to the fingertips According to the data sheet, the median thickness at the palm is 0.07 mm (± 0.02 mm) and at the fingertips 0.09 mm (± 0.02 mm), with a median length of at least 240 mm. The slightly greater thickness at the fingertips takes into account the greater mechanical stress involved in gripping and feeling. The batch is tested using an AQL value of 1.5, the sampling inspection level commonly used in the glove industry for the statistical defect rate per batch. This means that GreenGen’s key performance indicators are on a par with those typically found in conventional nitrile examination gloves that have not been tested for biodegradability. Green as the identifying colour in the nitrile range Unlike the neutral, blue or black versions in the rest of the Meditrade nitrile range, GreenGen is coloured in a striking green, which, according to the manufacturer, is derived from a copper phthalocyanine green pigment. Businesses that use colour-coding to distinguish between different workstations or process stages can make targeted use of this colour as a distinguishing feature, for example, to visually set the GreenGen variant apart from the standard product without the need for additional labelling. Powder-free for less residue GreenGen is powder-free, so no powder residue is left on workpieces, samples or foodstuffs when the glove is removed. This is particularly important where residues could compromise sample quality or where powder particles are undesirable in the immediate vicinity of foodstuffs. The data sheet also lists EN ISO 10993 (biological evaluation of medical devices) among its standards. Five sizes, each with its own item number We offer the GreenGen in sizes XS, S, M, L and XL, with each size having its own manufacturer’s item number and its own EAN. This makes it easier to reorder individual sizes without any mix-ups between sizes during the ordering process, particularly when several sizes are in use simultaneously across different departments within the same organisation. Typical applications As a powder-free nitrile glove with documented biodegradability, GreenGen is suitable for, amongst other things: Laboratory procedures and sample processing in organisations with sustainability requirements in their procurement policies Catering and food processing, as the glove is food-safe according to the data sheet Examination and care activities involving high daily consumption Businesses that wish to distinguish between different types of nitrile gloves by colour This means that the daily use of disposable gloves when dealing with customers or auditors can be substantiated by a verifiable testing standard, rather than relying on an unsubstantiated sustainability claim, an argument that is increasingly sought after in tenders with environmental criteria. In training, too, the example of GreenGen clearly demonstrates how environmental testing standards and the protective function of a disposable glove can be reconciled. Standards, testing and packaging GreenGen complies with EN 455 (Parts 1 to 4) for examination gloves and with EN ISO 10993 for the biocompatibility of the material. It is sold in cartons of 1,000, divided into sizes XS to XL, each with its own item number. Anyone who requires tested resistance to chemicals and cytostatic agents in addition to biodegradability will find this in the Nitril X-Long from the same range. An overview of the entire range of materials is provided by the category Nitrile gloves. Technical details MaterialNitrile ColourGreen (copper phthalocyanine green pigment) PowderingPowder-free Lengthat least 240 mm (median) Thickness (palm)0.07 mm ± 0.02 mm (median) Thickness (fingertip)0.09 mm ± 0.02 mm (median) AQL1.5 PackagingCarton of 1,000 FeaturesPowder-free, food-safe according to the data sheet StandardsEN 455-1/-2/-3/-4, EN ISO 10993, ASTM D5526, ASTM D5511 (biodegradability) Scope of delivery 1 carton = 1,000 Meditrade Nitril GreenGen examination gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities, a different colour from the Meditrade nitrile range, or a version with additional chemical resistance? Our procurement service will be happy to help you choose the right product.
Content: 1000 piece(s) (€4.90 / 100 piece(s))
Unigloves Black Pearl Nitrile Gloves, Black, Powder-free, Size M, GP0033
In a laboratory with several workstations or in a workplace with different work areas, a consistent colour-coding system helps to prevent mix-ups. Black nitrile gloves such as the Unigloves Black Pearl fulfil this function without compromising on protection or classification. These powder-free, latex-free gloves, made from fully dipped nitrile, feature textured fingertips for a secure grip during wet or oily tasks and a rolled cuff that makes them easier to put on. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Black Pearl range is completely latex-free and, according to the manufacturer, also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). The median force at break is at least 6.0 N both before and after artificial ageing, whilst the palm has a thickness of at least 0.05 mm, measured as a single layer in the centre of the palm according to the data sheet. Nitrile gloves with chemical protection according to EN 374, Category III, Type C The glove is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, the highest protection category specified by the standard, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, which corresponds to the highest level on the scale, with a degradation rate of minus 5.3 %. For work involving other chemicals, it is worth consulting the manufacturer’s product-specific chemical resistance table in advance, as the data sheet only lists this one test chemical with numerical values. Tested according to EN 455, PPE Category III The Black Pearl gloves comply with EN 455 (Parts 1 to 4) for medical single-use gloves and are manufactured under a quality management system certified to DIN EN ISO 13485:2021. As personal protective equipment, they are classified in Category III, the highest PPE category for gloves involving complex risks, with type examination according to Modules B and C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834). In the 1,000 ml water tightness test, they demonstrate a high level of impermeability with an AQL value of 1.5. Furthermore, they are food-safe; however, the data sheet does not specify a particular regulation in this regard. Choosing the right size With nitrile gloves, the fit determines tactile sensitivity and safety: if they are too tight, they are difficult to put on and restrict dexterity; if they are too loose, they reduce grip and may slip whilst working. The manufacturer also assigns a numerical glove size to each Black Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. These numbers follow the standard sizing system used in EN ISO 21420, one of the standards against which the Black Pearl is tested, and are based on hand circumference in inches, measured at the widest point of the hand excluding the thumb. If you already know your glove size from other PPE gloves, you can use that directly; alternatively, you can refer to the specified width in millimetres. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00315-675 mm (± 5 mm)≥ 240 mm SGP00326-785 mm (± 5 mm)≥ 240 mm MGP00337-895 mm (± 5 mm)≥ 240 mm LGP00348-9105 mm (± 5 mm)≥ 240 mm XLGP00359-10120 mm (± 10 mm)≥ 240 mm Black in the twelve-colour Pearl range Black Pearl is one of twelve colours in the Unigloves Pearl range available from us: Blue Pearl, Cobalt Pearl, Yellow Pearl, Green Pearl, Violet Pearl, Magenta Pearl and Mint Pearl, through to Opal Pearl, Orange Pearl and Pink Pearl, and finally Red Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips, a rolled cuff and classification according to EN ISO 374-1 Category III Type C; however, according to the respective data sheets, they differ slightly in details such as the thickness of the palm and the width per size, varying between approximately 0.05 mm and 0.09 mm depending on the colour. For exact values for any other colour, please refer to the relevant product-specific data sheet. Black is particularly suitable where contrast is important: light-coloured powder residues, crystals or foreign particles are easier to spot on a dark surface than on a light-coloured glove, and in the tattoo and cosmetics industries, black has now become an established part of the look. In a workplace using several Pearl colours, black can also be used specifically for colour-coding, for example, to clearly distinguish a workstation, a process step or a shift from the other colours, without any one colour being at a technical disadvantage. Use, storage and disposal We can provide storage conditions and shelf life on request. Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Nitrile gloves such as the Black Pearl are usually changed for each task or process step, or at the latest at the first visible sign of damage, soiling or contact with chemicals outside the tested application. After use, they are generally disposed of as commercial waste, whilst contaminated gloves are disposed of separately in accordance with internal hazardous substances regulations. Typical applications The dark colour makes the Black Pearl an obvious choice wherever contrast or a uniform appearance is required: Tattoo and beauty salons, where black has now become an established colour Laboratories and food processing, where light-coloured powder residues, crystals or foreign particles are more visible on dark gloves than on light-coloured ones Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III Businesses using multiple Unigloves Pearl colours, where black is specifically used for colour-coding individual workstations, shifts or process steps For example, in a laboratory with several Pearl colours, it is possible to see at a glance which workstation is currently using black, whilst in a tattoo or beauty salon, the same colour primarily ensures a consistent, professional appearance. Assessing requirements correctly: from the carton to the change routine The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available at different workstations independently of one another, without having to open the entire carton. A simple rough calculation based on estimated consumption figures helps with demand planning: at a rate of 10 gloves per workstation per day, a box of 100 covers around two working weeks, whilst a whole carton covers around 20 working weeks. If consumption is higher, at 30 gloves per workstation per day, one box will last for around three to four working days and a carton for a good six to seven working weeks. For businesses with multiple workstations, the same calculation can be multiplied by the number of workstations to roughly estimate the requirement for a specific period and reorder in good time. Sales are exclusively by the full carton; a single box of 100 cannot be selected separately during the ordering process, even though the boxes can be opened and used independently of one another in the workplace. Frequently asked questions about the 1,000-piece carton Is Black Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant are the gloves to chemicals?The data sheet lists a test chemical with numerical values: 40 % sodium hydroxide solution with a permeation level of 6 and a degradation rate of -5.3 %. A breakthrough time in minutes is not specified in the data sheet; only the permeation level is given. For other chemicals, it is advisable to consult the manufacturer in advance. Are the Black Pearl gloves sterile?No, according to the data sheet, they are non-sterile, single-use gloves. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Do other Pearl colours differ technically from Black Pearl?Slightly: the thickness of the palm and the width per size vary between colour variants as shown in the data sheets. For exact specifications of a different colour, please refer to the relevant product-specific data sheet. Technical details MaterialNitrile, fully dipped ColourBlack Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palmmin. 0.05 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Black Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.75 / 100 piece(s))
Meditrade Nitrile StellarGrip Black Protective Gloves, box of 500 (10 boxes of 50), PPE Class III, M, 1292M
Whether in the workshop or on a maintenance call-out, any light-coloured glove will soon show signs of oil and dirt. Meditrade Nitril StellarGrip protective gloves in black are industrial protective gloves with a diamond-patterned texture on both sides for a secure grip; they are powder-free and available in cartons of 500 in sizes S to XXL. Black: a practical colour for work The dark colour is no coincidence in commercial use: traces of oil, grease and dirt are much less noticeable on black than on light-coloured examination gloves, such as those commonly used in laboratories or medical practices. For tasks where the glove regularly comes into contact with dirt anyway, this is a purely practical advantage, without compromising the protective function itself. Diamond pattern for a secure grip The surface features a diamond pattern on both sides. This improves grip when handling oily or slippery workpieces, for example, during assembly, on machinery or when handling metal parts, and works regardless of which side of the glove is currently being used. Particularly for tasks where the glove is frequently turned over or used at varying grip angles, the double-sided texture saves the need for extra hand movements. Thickness designed for everyday workshop use With a thickness of at least 0.18 mm on the palm and fingertips, and at least 0.10 mm on the cuff, the StellarGrip is significantly more robust than a thin disposable examination glove. Weighing 8.5 g (± 0.5 g) per glove and with a force at break of 11 N both before and after artificial ageing, it is designed for use several times a day in workshops, warehouses or on assembly lines without making the handling of small parts unnecessarily difficult. Significantly thicker than a disposable examination glove By way of comparison: a standard nitrile examination glove used in laboratories is usually around 0.07 to 0.12 mm thick. With a thickness of at least 0.18 mm on the palm and fingertips, the StellarGrip is designed to be significantly sturdier, a deliberate distinction between a disposable medical glove intended for brief contact tasks and an industrial protective glove designed to withstand mechanical stress over extended periods. PPE Category III for industrial use The StellarGrip is classified as Category III Personal Protective Equipment in accordance with Regulation (EU) 2016/425 and complies with EN 374 and EN ISO 21420. It is manufactured under a quality management system certified according to EN ISO 13485:2016. The glove is positioned as an industrial protective glove; there is no documentation classifying this product as a medical device, which is generally not required for its intended industrial use. Sizes from S to XXL Unlike the examination gloves in the rest of the Meditrade range, which usually start at XS, the StellarGrip covers sizes S, M, L, XL and XXL. This meets the wider range of size requirements in industrial settings, where larger hand circumferences are more common than in laboratories or medical practices. Each size has its own manufacturer’s item number and its own EAN, so that individual sizes can be reordered as required. Typical applications As a robust nitrile protective glove with a diamond pattern, the StellarGrip Black is suitable for, amongst other things: Workshop and automotive work involving regular contact with oil and grease Warehouse, logistics and assembly work involving increased wear and tear on the gloves Maintenance and repair work where dark soiling is virtually unavoidable Industrial and commercial enterprises requiring a more robust nitrile glove than disposable examination gloves For example, in a vehicle workshop, the same glove can be worn for an entire shift without visible soiling forcing a premature change, an advantage over light-coloured disposable gloves, which look unsightly after only a short time. Even when inspecting oily or dusty components on receipt, handling remains secure thanks to the diamond pattern, even when the glove surface itself is already soiled. Colour options in the StellarGrip range Those who prefer a highly visible glove colour for tasks with increased safety requirements will find the identical design in StellarGrip Orange. Both colours share the same material, diamond pattern and thickness; they differ only in colour. The complete nitrile range can be browsed in the Nitrile Gloves category. Technical details MaterialNitrile ColourBlack SurfaceDiamond pattern on both sides PowderingPowder-free Thickness (palm/fingertip)min. 0.18 mm Cuff thicknessmin. 0.10 mm Weight per glove8.5 g ± 0.5 g Force at break (before/after ageing)11 N PPE CategoryIII (Regulation (EU) 2016/425) Packaging500 pieces per carton (10 boxes of 50) StandardsEN 374, EN ISO 21420, EN ISO 13485:2016 Scope of delivery 1 carton = 500 Meditrade Nitril StellarGrip Black protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger purchase quantities, the second colour from the StellarGrip range, or assistance in selecting the right protective gloves for your workplace? Our procurement service will be happy to support you with the suitable selection.
Content: 500 piece(s) (€7.18 / 100 piece(s))
Meditrade Nitrile StellarGrip Orange protective gloves, carton of 500 (10 boxes of 50), PPE Class III, L
A discarded glove can easily get lost in a crowded toolbox or on a cluttered workbench. Meditrade Nitril StellarGrip protective gloves in orange are industrial-grade protective gloves with a diamond-patterned texture on both sides; they are powder-free, in a striking signal colour and available in cartons of 500 in sizes S to XXL, designed for workshops, warehouses and assembly facilities looking for a robust yet highly visible nitrile glove. Orange as a highly visible work colour The vibrant orange colour stands out clearly against dark workpieces, machine parts or workbenches. This makes it easier to spot a glove that has been set aside or dropped in the workplace than one in a less conspicuous colour, a simple yet noticeable advantage in day-to-day use, particularly when frequently switching between gloves and tools during various work stages. The colour remains clearly visible even in poorly lit storage or workshop areas. Diamond pattern on both sides Like the entire StellarGrip range, the orange version also features a diamond pattern on both sides. This improves grip on oily, dusty or smooth surfaces, for example, when handling tools or metal parts, regardless of whether the inside or outside of the glove is used. As both sides have the same texture, there is no need to worry about a specific orientation when putting them on, which makes it easier to switch quickly between tasks. Robust thickness for continuous use The thickness is at least 0.18 mm on the palm and fingertips, and at least 0.10 mm at the cuff, with a weight of 8.5 g (± 0.5 g) per glove. According to the data sheet, the force at break of 11 N applies both before and after artificial ageing, indicating that the mechanical strength does not depend solely on a fresh, unused glove, but is retained even after a certain period of storage. Size range for commercial use The StellarGrip Orange is available in sizes S, M, L, XL and XXL, a range tailored to commercial use which does not include an XS size. Each size has its own manufacturer’s item number and its own EAN, meaning that individual sizes can be reordered independently of one another if multiple hand sizes are in use within a business. PPE Category III and testing standards The glove is classified as Category III Personal Protective Equipment in accordance with Regulation (EU) 2016/425, complies with EN 374 and EN ISO 21420, and is manufactured under a quality management system certified according to EN ISO 13485:2016. This product is not documented as a medical device; the StellarGrip is positioned purely as an industrial protective glove and is not intended for medical examination activities. Typical applications With its striking signal colour and robust diamond pattern, the StellarGrip Orange is suitable for, amongst other things: Warehouse and order-picking tasks where gloves are frequently taken off and put back on Assembly and maintenance work involving frequent changes of tools Businesses that prefer a highly visible glove colour as part of their health and safety policy Poorly lit warehouse and workshop areas where dark-coloured gloves are harder to spot Industrial and commercial enterprises requiring a more robust nitrile glove than disposable examination gloves For example, in a materials store, it is possible to see at a glance where a pair of gloves has been set aside between two order-picking operations, rather than having to search for them afterwards in a cluttered storage area. Even when moving between workstations, the striking colour makes it easier to quickly check at a glance whether gloves are being worn at all, for example whilst making rounds through several work areas of a site where gloves are compulsory. Colour options in the StellarGrip range Those who prefer the more discreet option for work involving regular contact with oil and dirt will find the same technology in StellarGrip Black. The material, diamond pattern, thickness and pack size are identical for both colours; the only difference lies in the colouring. Some companies deliberately use both colours in parallel, for example to distinguish between different work areas or shifts by colour. The entire product range can also be found under ‘Nitrile gloves’. Technical details MaterialNitrile ColourOrange SurfaceDiamond pattern on both sides PowderingPowder-free Thickness (palm/fingertip)min. 0.18 mm Cuff thicknessmin. 0.10 mm Weight per glove8.5 g ± 0.5 g Force at break (before/after ageing)11 N PPE CategoryIII (Regulation (EU) 2016/425) Packaging500 pieces per carton (10 boxes of 50) StandardsEN 374, EN ISO 21420, EN ISO 13485:2016 Scope of delivery 1 carton = 500 Meditrade Nitril StellarGrip Orange protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger quantities, the black version from the StellarGrip range, or advice on selecting the right gloves for your workplace? Our procurement service will be happy to support you with the suitable selection.
Content: 500 piece(s) (€7.60 / 100 piece(s))
Unigloves Pink Pearl Nitrile Gloves, Pink, Powder-free, Size XS, GP0051
The thinner a glove, the more direct the sense of touch, but the more important it is that the fit is just right. With a palm thickness of at least 0.05 mm, the Unigloves Pink Pearl nitrile gloves are among the thinnest in the Pearl range, a thickness matched only by Black Pearl among the Pearl colours in our range. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a vibrant pink, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000, divided into 10 boxes of 100 each, in four sizes from XS to L. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Pink Pearl gloves are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of at least 0.05 mm, measured as a single layer in the centre of the palm; the data sheet does not specify separate values for the fingertips and cuff. The median force at break is at least 6.0 N, both before and after artificial ageing. Thin material for high tactile sensitivity With a minimum palm thickness of 0.05 mm, Pink Pearl is one of the thinnest documented colours in the Pearl range. A thinner material transmits more tactile feedback to the fingertips, which is beneficial for tasks where fine movements and immediate feedback are crucial, such as when making fine stitches, during dental work at the treatment chair, or when carrying out precision work in cosmetics. The trade-off: a thinner glove is generally more susceptible to mechanical stress than a thicker material, which is why a more robust glove may be the better choice for rough or sharp-edged tasks. Chemical protection according to EN 374, Category III, Type C Pink Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, with a degradation of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies, as only this one test chemical with numerical values is listed in the data sheet. Tested according to EN 455, PPE Category III Pink Pearl complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified according to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE category, Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer. Choosing the right size: just four sizes instead of five in our range The manufacturer assigns a numerical glove size to each Pink Pearl standard size, ranging from 5 to 6 for XS to 8 to 9 for L, according to the data sheet. Important for ordering: Pink Pearl can be selected in sizes XS to L. Size XL (manufacturer’s item no. GP0055) is listed by the manufacturer. If you require size XL, you will find it in other Pearl colours, such as Red Pearl in XL, or please contact us via our procurement service. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00515-676 mm (± 4 mm)≥ 240 mm SGP00526-786 mm (± 4 mm)≥ 240 mm MGP00537-898 mm (± 4 mm)≥ 240 mm LGP00548-9107 mm (± 4 mm)≥ 240 mm Pink in the twelve-colour Pearl range Pink Pearl is one of twelve colours in the Unigloves Pearl range. Amongst the warm shades in the range, Pink is lighter and more subtle than the bolder Magenta Pearl and the bright red Red Pearl. Anyone looking for the same thin material thickness as Pink Pearl but preferring a dark contrasting colour will find it in Black Pearl, which is the only other Pearl colour in our range that also achieves a palm thickness of at least 0.05 mm. All colours share the same basic construction, made from fully dipped nitrile with textured fingertips and a rolled cuff. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The combination of thin material and a striking colour makes Pink Pearl particularly interesting for tasks requiring a high degree of tactile sensitivity: Dental practices and other treatment areas involving fine motor skills when working on patients Cosmetic and beauty salons, for example during eyelash, nail or skin treatments Veterinary practices involving examinations requiring fine motor skills Food processing (food-safe according to the manufacturer) Where a more robust palm is required, such as for heavier cleaning or laboratory work, a thicker Pearl colour such as Cobalt or Green is the more suitable choice. Assessing requirements correctly: from the carton to the treatment area The carton of 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available independently at different workstations. In a dental or beauty practice, assuming 2 pairs of gloves per treatment appointment, a box of 100 pieces, i.e. 50 pairs, covers around 25 appointments, whilst a whole carton covers 250 appointments. If consumption is higher, at 3 pairs per appointment, one box is sufficient for around 16 to 17 appointments and a whole carton for around 165 appointments. The product is sold exclusively as a whole carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Is Pink Pearl also available in size XL?It is available from the manufacturer (item no. GP0055), but here sizes XS to L can be selected. For XL, another Pearl colour or our procurement service is an option. Is Pink Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation of minus 5.3 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. Why is the palm thinner on Pink Pearl than on other colours?According to the data sheet, it is at least 0.05 mm thick, similar in thickness to Black Pearl and thinner than colours such as Cobalt (0.09 mm) or Green Pearl (at least 0.06 mm). This increases tactile sensitivity but reduces mechanical robustness. How do I find the right size?Either by the numerical glove size (XS 5-6 to L 8-9) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourPink Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Available sizesXS to L (XL listed by the manufacturer as GP0055) Length≥ 240 mm Width per sizeXS 76 mm, S 86 mm, M 98 mm, L 107 mm, ± 4 mm in each case Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9 Palm thicknessmin. 0.05 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use only StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Pink Pearl nitrile gloves (size as per variant selection, XS to L) Individual requirements and procurement service Do you require size XL, a different colour from the Unigloves Pearl range, or larger quantities for your practice or studio? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.60 / 100 piece(s))
Unigloves Mint Pearl Nitrile Gloves, Mint, Powder-free, Size L, GP6804
The Unigloves Mint Pearl nitrile gloves add a light, cool shade of green to the Pearl range, which stands out clearly from bolder colours such as Green or Cobalt. They are powder-free, latex-free, thiuram-free and protein-free, fully dipped in nitrile, with textured fingertips for a secure grip and a rolled cuff. The Mint Pearl nitrile gloves are sold in a carton containing 1,000 gloves (10 boxes of 100 each), in five sizes from XS to XL with a comparatively snug fit. Tight fit: width tolerance of just ± 3 mm Mint Pearl has a tight manufacturing tolerance: The width is 76 mm (± 3 mm) for XS, 84 mm (± 3 mm) for S, 94 mm (± 3 mm) for M, 105 mm (± 3 mm) for L and 113 mm (± 3 mm) for XL. This points to comparatively consistent dimensions within a size. The length is at least 240 mm for all sizes, whilst the thickness at the palm is 0.07 mm (± 0.02 mm). The data sheet does not specify values for the fingertips or cuff. The median force at break is at least 6.0 N both before and after artificial ageing. Chemical protection according to EN ISO 374, Category III, Type C Mint Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, which corresponds to the highest level on the scale, with a degradation of minus 5.3 %. Manufacturing takes place under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). With an AQL value of 1.5, the glove achieves a high level of impermeability in the watertightness test; it is also food-safe according to the manufacturer. Typical applications Mint Pearl is suitable wherever a light, friendly-looking contrasting colour is required against darker station colours: Laboratories and medical practices that use mint as a light contrasting colour alongside darker Pearl colours Food processing (food contact suitability according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III Facilities with a narrow size range that benefit from the comparatively low manufacturing tolerance of ± 3 mm For example, Mint Pearl is suitable for stations where a light but not garish shade is desired, whilst neighbouring areas are colour-coded with more vibrant Pearl colours. Mint Pearl in the Pearl range Mint Pearl is one of twelve colours in the Unigloves Pearl range available from us. Those looking for a more vibrant shade of green will find it in the darker Green Pearl, whilst those who prefer a similarly light, pastel colour will find it in Opal Pearl. All colours in the range share the same basic construction of fully-dipped nitrile with textured fingertips and a rolled cuff; however, according to the respective data sheets, they differ in details such as manufacturing tolerance, documented material thickness and scope of certification. Technical details MaterialNitrile, fully dipped ColourMint Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 76 mm (± 3 mm), S 84 mm (± 3 mm), M 94 mm (± 3 mm), L 105 mm (± 3 mm), XL 113 mm (± 3 mm) Thickness (palm)0.07 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Mint Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves Magenta Pearl Nitrile Gloves, Magenta, Powder-free, Size XL, GP8505
Gloves that fit loosely to varying degrees depending on size take time to adjust and hinder dexterity. With the Unigloves Magenta Pearl nitrile gloves, it is striking that the manufacturer specifies the same tight manufacturing tolerance of just ± 3 mm for each of the five sizes, which is tighter than for some other colours in the Pearl range. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a vibrant magenta, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000, divided into 10 boxes of 100 each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Magenta Pearl are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of 0.07 ± 0.02 mm, measured as a single layer in the centre of the palm; the data sheet does not provide separate figures for the fingertips and cuff. The median force at break is at least 6.0 N both before and after artificial ageing. Tight manufacturing tolerances: consistent fit across all sizes A glance at the size chart in the data sheet reveals a distinctive feature: Whilst some other Pearl colours have a larger width tolerance, Magenta Pearl remains constant at ± 3 mm across all five sizes, ranging from 76 ± 3 mm for XS to 113 ± 3 mm for XL. In practice, this means a more consistent fit within each size, regardless of which size is chosen. This is particularly relevant for activities that require a consistently high level of dexterity, such as in the cosmetics industry or for intricate tattoo and piercing work, where a fit that is too loose or too tight can noticeably impair precision. Chemical protection according to EN 374, Category III, Type C Magenta Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, with a degradation of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies, as only this one test chemical is listed with numerical values in the data sheet. Tested according to EN 455, PPE Category III Magenta Pearl complies with EN 455 (Parts 1 to 4) for single-use medical gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer. Choosing the right size The manufacturer assigns a numerical glove size to each Magenta Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. SizeManufacturer’s item no.Glove sizeWidthLength XSGP85015 to 676 mm (± 3 mm)≥ 240 mm SGP85026 to 784 mm (± 3 mm)≥ 240 mm MGP85037 to 894 mm (± 3 mm)≥ 240 mm LGP85048 to 9105 mm (± 3 mm)≥ 240 mm XLGP85059 to 10113 mm (± 3 mm)≥ 240 mm Magenta in the twelve-colour Pearl range Magenta Pearl is one of twelve colours in the Unigloves Pearl range available from us. Within the range’s warm colour palette, Magenta stands out clearly from the lighter Pink Pearl and the bright red Red Pearl, meaning that all three can be easily distinguished even when used side by side in the same workplace. If you are looking for a dark contrasting colour, you will find it in Black Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips and a rolled cuff; the width tolerance of ± 3 mm across all sizes differs between the colours according to the data sheets. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The bold colour and consistent fit make Magenta Pearl particularly interesting for tasks that combine visible precision with a clear brand impact: Cosmetics and beauty salons with high standards regarding fit and dexterity Tattoo and piercing studios, where the colour serves not only as protection but also creates a visible, distinctive brand impact Food processing (food contact suitability according to the manufacturer) Businesses using multiple Unigloves Pearl colours, where Magenta is specifically used for colour-coding individual workstations or teams In studios with direct customer contact, the consistent fit across all sizes also ensures that every member of staff has the same grip experience, regardless of their own glove size. Assessing requirements correctly: from the carton to the customer appointment The carton of 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available at different workstations independently of one another. In a beauty or tattoo studio, assuming 2 pairs of gloves per client appointment, a box of 100 pieces, i.e. 50 pairs, covers around 25 appointments, whilst a whole carton covers 250 appointments. If consumption is higher, at 4 pairs per appointment, one box is sufficient for around 12 to 13 appointments and a whole carton for around 125 appointments. Sales are exclusively by the whole carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton What does the tight width tolerance of ± 3 mm mean in practice?It ensures a more consistent fit within each size. Some other Pearl colours have a larger width tolerance, whilst Magenta Pearl remains consistently at ± 3 mm across all five sizes. Is Magenta Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation of minus 5.3 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. How does Magenta differ from Pink and Red Pearl?All three are distinct colours with their own data sheets. Magenta is a colour that lies between the lighter Pink and the bright red Red; technically, the main differences between the colours lie in the material thickness and width tolerance. How do I find the right size?Either by the numerical glove size (XS corresponds to 5 to 6, XL to 9 to 10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourMagenta Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 76 mm, S 84 mm, M 94 mm, L 105 mm, XL 113 mm, ± 3 mm each Glove size per sizeXS 5 to 6, S 6 to 7, M 7 to 8, L 8 to 9, XL 9 to 10 Palm thickness0.07 ± 0.02 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4 PPE categoryIII (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Magenta Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger purchase quantities for your studio or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves Orange Pearl Nitrile Gloves, Orange, Powder-free, Size XS, GP0131
The Unigloves Orange Pearl nitrile gloves add a strong signal colour to the Pearl range, making them particularly suitable for situations where a work area needs to be recognisable at a glance. They are powder-free, latex-free, thiuram-free and protein-free, fully dipped in nitrile, with textured fingertips and a rolled cuff. The Orange Pearl nitrile gloves are sold in a carton containing 1,000 gloves (10 boxes of 100 each), in five sizes from XS to XL. Vibrant signal colour with a thickness of 0.08 mm Orange Pearl is one of the slightly thicker colours in the Pearl range: the thickness at the palm is 0.08 mm (± 0.02 mm); the data sheet does not specify values for the fingertips or cuff. The width increases from 76 mm (± 4 mm) for XS, through 86 mm, 98 mm and 107 mm (each ± 4 mm) for S, M and L up to 115 mm (± 4 mm) for XL, with a length of at least 240 mm across all sizes. The median force at break is at least 6.0 N both before and after artificial ageing. Tested according to EN 455 and EN ISO 374, Category III, Type C Orange Pearl is classified as a Category III, Type C chemical-resistant glove according to EN ISO 374-1 and also offers protection against viruses, fungi and bacteria according to EN ISO 374-5. In testing with 40 % sodium hydroxide solution according to EN 374-4, the highest permeation level 6 was achieved, with a degradation of minus 5.3 %. The glove is manufactured under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). The AQL value of 1.5 in the watertightness test describes the watertightness of the glove; according to the manufacturer, it is also food-safe. Typical applications The bold signal colour makes Orange Pearl an obvious choice wherever a work area needs to be clearly identifiable: Warning areas and hazard zones, where a highly visible signal colour aids identification Waste separation and disposal processes, where orange is often used as a dedicated colour code Food processing (food-safe according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III In workplaces with multiple warning levels, orange can be used specifically as a medium-intensity signal colour between a neutral base colour and a particularly eye-catching colour such as red. Orange Pearl in the Pearl range Orange Pearl is one of twelve colours in the Unigloves Pearl range available from us. Yellow Pearl is suitable as a related warm signal colour, whilst Red Pearl is suitable for even more eye-catching identification. All colours in the range share the same basic construction made from fully dipped nitrile, but differ, as specified in the respective data sheets, in details such as material thickness, width tolerance and the scope of the documented test values. Technical details MaterialNitrile, fully dipped ColourOrange Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 76 mm (± 4 mm), S 86 mm (± 4 mm), M 98 mm (± 4 mm), L 107 mm (± 4 mm), XL 115 mm (± 4 mm) Thickness (palm)0.08 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (#2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Orange Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.01 / 100 piece(s))
Meditrade Nitrile X-Long protective gloves (295 mm, blue, 10 x 100 pcs. carton), L, 1282L
When handling hazardous substances in clinics and laboratories, aggressive cleaning agents or concentrated alkalis, the protection provided by a standard examination glove on the forearm is often insufficient. The Meditrade Nitril X-Long protective gloves extend the protective area with an extra-long cuff; they are powder-free, blue in colour and, according to the data sheet, tested against 19 chemicals and 12 hazardous substances from the clinical sector. The X-Long is sold in cartons of 1,000, in sizes XS to XL. Extra-long cuff for greater protection According to the data sheet, the length is 295 mm (± 5 mm, median). This additional length covers a larger part of the forearm, for example when reaching into containers, when working above head height or when coming into contact with splashes above the rolled cuff of a shorter glove. Thickness at the cuff, palm and fingertips According to the data sheet, the median thickness at the cuff is 0.08 mm (± 0.02 mm), 0.07 mm (± 0.01 mm) on the palm and 0.12 mm (± 0.02 mm) at the fingertips, with a unit weight of 6.5 g (± 0.3 g, size M, median). The force at break is at least 9 N (median) both before and after artificial ageing, tested with an AQL value of 1.5. The greater thickness at the fingertips takes account of the higher mechanical stress experienced when gripping, without unnecessarily restricting the tactile sensation on the palm. Tested chemicals: 19 substances According to EN 16523-1, the X-Long was tested for breakthrough time and performance level against 19 chemicals, including several substances commonly found in laboratories and cleaning environments, with a breakthrough time of over 480 minutes (performance level 6): 40 % sodium hydroxide, 37 % formaldehyde, 50 % potassium hydroxide, 4 % chlorhexidine digluconate, 10 % povidone-iodine, 5 % glutaraldehyde and 5 % ethidium bromide. For other substances, the protective effect is significantly lower, as the data sheet clearly shows: ChemicalBreakthrough timePerformance level Hydrogen peroxide 30 %> 30 min2 Acetic acid 10 %> 60 min3 Hydrochloric acid 36 %> 10 min1 Isopropanol 40 % / 70 %> 10 min1 Ethanol 70 %inconsistentDo not use Isopropanol 100 % / benzalkonium chloride 50 %immediatelyDo not use According to the data sheet, no test values are available for 80 % sulphuric acid and 85 % phosphoric acid. This overview does not replace a separate risk assessment, but it does illustrate how significantly the protective effect varies depending on the substance and concentration. Tested hazardous substances from the clinical sector: 12 substances In addition to the general list of chemicals, 12 hazardous substances from the clinical sector were tested for their breakthrough time according to EN 16523-1. For eleven of the twelve substances, the breakthrough time according to the data sheet is over 240 minutes, for one of them even over 480 minutes. The lowest value on the list is 225 minutes. The breakthrough times for each substance are listed in the data sheet. For organisations that regularly work with such substances, for example in hospital pharmacies or oncology, this breakdown is a basis for their own risk assessment. Typical applications With its extended cuff and tested chemical resistance, the X-Long is suitable for, amongst other things: Handling hazardous substances in hospital pharmacies and oncology Cleaning and disinfection work involving aggressive agents, where splashes onto the forearm are possible Laboratory and industrial work requiring increased splash protection, such as during decanting or immersion Food processing, for which the glove is suitable according to the data sheet For example, when preparing disinfectant solutions from concentrate, the cuff can be deliberately pulled over the sleeve so that, even when moving the arm upwards, no strip of unprotected skin is exposed on the forearm, an advantage that a standard short glove does not offer in this situation. Class I medical device and PPE Category III Type B The X-Long is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III, Type B personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, DIN EN 374-5 (virus penetration) and ASTM F 1671 (ISO 16604), and is manufactured under a quality management system certified according to EN ISO 13485:2016. According to the manufacturer, it is produced without natural rubber latex in accordance with the BGW guidelines on allergy prevention (as at 11/2011). Packaging and order quantities The X-Long is sold in a carton containing 1,000 gloves (10 boxes of 100 gloves each per size), with 63 cartons per pallet. For those who do not require chemical resistance testing for general laboratory routines, the Nitril GreenGen offers an alternative in the same cardboard packaging format. An overview of the full range of products can be found in the Nitrile Gloves category. Technical details MaterialNitrile butadiene rubber (NBR) with polymer coating ColourBlue SurfaceTextured, rolled cuff, ambidextrous Length295 mm ± 5 mm (median) Width per sizeXS 75 ± 5 mm to XL 115 ± 5 mm (median) Thickness (palm)0.07 mm ± 0.01 mm (median) Fingertip thickness0.12 mm ± 0.02 mm (median) Cuff thickness0.08 mm ± 0.02 mm (median) Weight (size M)6.5 g ± 0.3 g (median) Force at break (before/after ageing)min. 9 N (median) AQL1.5 Packaging100 pieces per box, 10 boxes per carton (1,000 pieces), 63 cartons per pallet Chemical resistance19 substances tested according to EN 16523-1 (see product description for an extract) Hazardous substances, clinical sector12 substances tested according to EN 16523-1, breakthrough times in the data sheet Medical device classI (Regulation (EU) 2017/745) PPE categoryIII Type B (Regulation (EU) 2016/425) StandardsEN 455-1/-2/-3/-4, EN 374-1/-2/-4/-5, EN 16523-1, EN ISO 21420:2020, ASTM F 1671 (ISO 16604) Scope of delivery 1 carton = 1,000 Meditrade Nitril X-Long protective gloves (size as per variant selection) Individual requirements and procurement service Do you require larger purchase quantities, a list of chemicals for a specific substance not covered by standard testing, or assistance with the risk assessment for your workplace? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€4.90 / 100 piece(s))
Unigloves Opal Pearl Nitrile Gloves, Opal, Powder-free, Size M, GP0093
The Unigloves Opal Pearl nitrile gloves feature a light, iridescent colour and, with a thickness of 0.09 mm on the palm, are among the slightly thicker styles in this colour range. They are powder-free, latex-free, thiuram-free and protein-free, fully dipped in nitrile, with textured fingertips and a rolled cuff. The Opal Pearl nitrile gloves are sold in a carton containing 1,000 pieces (10 boxes of 100 each), in five sizes ranging from XS to XL. Thickness of 0.09 mm and individual width tolerances per size The width of Opal Pearl gloves ranges from 75 mm (± 5 mm) for XS, through 85 mm, 95 mm and 105 mm (each ± 5 mm) for S, M and L, up to 120 mm (± 10 mm) for XL, the largest documented tolerance within this colour range. The thickness at the palm is 0.09 mm (± 0.03 mm); values for the fingertips and cuff are not available. The length is at least 240 mm in all sizes; the median force at break is at least 6.0 N both before and after artificial ageing. Tested according to EN 455 and EN ISO 374, Category III, Type C Opal Pearl is classified as a Category III, Type C chemical protection glove according to EN ISO 374-1 and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. In testing with 40 % sodium hydroxide solution according to EN 374-4, the highest permeation level 6 was achieved, with a degradation of minus 5.3 %. Manufacturing takes place under a quality management system certified according to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). With an AQL value of 1.5 in the watertightness test, the glove is also food-safe according to the manufacturer. Typical applications The light, iridescent shade makes Opal Pearl a pleasant alternative to bolder signal colours: Laboratories and medical practices that use a light, understated shade as their standard colour Food processing (food contact suitability according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III Businesses that prefer a slightly thicker material to thinner Pearl colours Where several light Pearl colours are used side by side, Opal Pearl stands out slightly from more monochromatic pastel shades thanks to its iridescent tone, without appearing as bold as a pure signal colour. Application and packaging Like the other nitrile gloves in the Pearl range, Opal Pearl is a non-sterile, single-use glove that can be worn on either hand. The carton containing 1,000 gloves, divided into 10 boxes of 100 each, is suitable for businesses with regular consumption, such as laboratories, medical practices or workshops with multiple workstations, as individual boxes can be made available independently at different stations. Opal Pearl in the Pearl range Opal Pearl is one of twelve colours in the Unigloves Pearl range available from us. Other light, pastel shades in the range include Mint Pearl and Pink Pearl. All colours in the range share the same basic construction made from fully-dipped nitrile, but differ, according to their respective data sheets, in details such as material thickness, width tolerance and scope of certification. Technical details MaterialNitrile, fully dipped ColourOpal Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Thickness (palm)0.09 mm (± 0.03 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (#2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Opal Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves Red Pearl Nitrile Gloves, Red, Powder-free, Size M, GP0063
In hardly any other colour system is red as unambiguously assigned as in the marking of exceptions: stop, caution, special case. It is precisely this signalling effect that the Unigloves Red Pearl nitrile gloves bring to the colour of the gloves in the workplace, for example to visually distinguish a non-standard process step, an allergen area or a cleaning validation from the other colours in the Pearl range. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a vibrant red, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000, divided into 10 boxes of 100 each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Red Pearl gloves are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of 0.08 ± 0.03 mm, measured as a single layer in the centre of the palm; the data sheet does not provide separate figures for the fingertips and cuff. The median force at break is at least 6.0 N both before and after artificial ageing. Red as a signal colour: colour coding for exceptions and special processes In many colour-coding systems used in the food and laboratory sectors, red is the colour that attracts attention most quickly, for example, for production lines handling allergens, for cleaning stages with particularly high hygiene requirements, or for areas where an error would be particularly costly. Because red stands out clearly from the other Pearl colours, Red Pearl is well suited in a multi-colour colour-coding system as a ‘special colour’ that deliberately catches the eye and reminds staff at a glance that different rules apply in this area compared with the standard colour-coding used in other stations. Chemical protection according to EN 374, Category III, Type C Red Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % sodium hydroxide solution according to EN 374-4, with a degradation of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies, as only this one test chemical with numerical values is listed in the data sheet. Tested according to EN 455, PPE Category III Red Pearl complies with EN 455 (Parts 1 to 4) for medical single-use gloves and is manufactured under a quality management system certified according to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer according to the manufacturer. Choosing the right size The manufacturer also assigns a numerical glove size to each Red Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. The width measurements for each size correspond exactly to those of Black Pearl, indicating that both colours are manufactured using the same basic shape. SizeManufacturer’s item no.Glove sizeWidthLength XSGP00615-675 mm (± 5 mm)≥ 240 mm SGP00626-785 mm (± 5 mm)≥ 240 mm MGP00637-895 mm (± 5 mm)≥ 240 mm LGP00648-9105 mm (± 5 mm)≥ 240 mm XLGP00659-10120 mm (± 10 mm)≥ 240 mm Red in the twelve-colour Pearl range Red Pearl is one of twelve colours in the Unigloves Pearl range available from us. As a signal colour, red complements the other warm shades in the range, the lighter Pink Pearl and the vibrant Magenta Pearl, which are more suited to the standard colour code than to exceptional cases. Anyone looking for a dark contrasting colour for cleanliness checks will find it in Black Pearl, which has the same dimensions as Red Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips and a rolled cuff. Use, storage and disposal Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. Typical applications The signal effect of red makes Red Pearl useful wherever an area or process step needs to be deliberately highlighted: Food processing involving allergen segregation or special cleaning steps (food contact suitability according to the manufacturer) Laboratories with a colour-coding system for critical or error-prone work steps Facilities using multiple Unigloves Pearl colours, where red is deliberately used as an ‘exception’ colour alongside the regular station colours Work involving 40 % sodium hydroxide solution and comparable chemicals within the scope of the tested EN 374 Category III This means that, in a facility using multiple colours, it is immediately apparent at a glance who is currently working with red and is therefore deliberately deviating from the standard colour code, for example, during a special cleaning procedure or when handling an allergen. Assessing requirements correctly: from the carton to the specific task The carton containing 1,000 gloves is divided into 10 boxes of 100 each, so that individual boxes can be made available independently of one another at different workstations. If red is reserved exclusively for special tasks rather than for day-to-day operations, for example, with an assumed consumption of just 5 gloves per day on selected special days, one box of 100 covers around 20 uses, whilst a whole carton covers 200 uses. If, on the other hand, red is used continuously as the station colour at a rate of 10 gloves per workstation per day, one box will last for around two working weeks, and a full carton for around 20 working weeks. Sales are exclusively by the whole carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Why is red particularly suitable for identifying exceptions?In many colour-coding systems, red is the most striking colour and is therefore often reserved for special processes, allergen areas or particularly critical work steps, whilst more neutral colours indicate regular operations. Is Red Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation of minus 5.3 %. The data sheet does not specify a breakthrough time in minutes, only the permeation level. Is it true that Red Pearl has the same dimensions as Black Pearl?Yes, according to the respective data sheets, the width measurements per size are identical for both colours, indicating the same basic shape. The palm thickness, however, differs slightly (Red 0.08 mm, Black min. 0.05 mm). How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourRed Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 105 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Thickness at the palm0.08 ± 0.03 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination Modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 Unigloves Red Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger purchase quantities for your business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.60 / 100 piece(s))
Unigloves Cobalt Pearl Nitrile Gloves, Cobalt, Powder-free, Size L, GP1014
Anyone who has to use a tablet, smartphone or barcode scanner from time to time whilst working in a laboratory or at reception will be familiar with the problem: taking off your gloves, using the device, putting them back on, several times an hour. According to the manufacturer, Unigloves Cobalt Pearl nitrile gloves are touchscreen-compatible, meaning that screens can be operated whilst wearing the gloves. These powder-free, latex-free gloves, made from fully dipped nitrile, come in a rich cobalt blue, with textured fingertips for a secure grip and a rolled cuff that makes them easier to slip on. They are sold in a carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, in five sizes from XS to XL. Latex-free, thiuram-free and protein-free As gloves made entirely from nitrile, the Cobalt Pearl are completely latex-free and, according to the manufacturer, are also thiuram-free and protein-free. This makes them a suitable choice for staff who need to take into account allergies to natural latex or sensitisation to vulcanisation accelerators (thiurams). According to the data sheet, the palm has a thickness of 0.09 ± 0.03 mm, measured as a single layer in the centre of the palm. The median force at break is at least 6.0 N, both before and after artificial ageing. Touchscreen-compatible: operate devices without changing gloves According to the manufacturer, Cobalt Pearl allows you to operate a mobile phone or tablet screen without taking off your gloves. This is particularly useful wherever digital documentation, scanning or communication is required whilst working, such as when recording samples in a laboratory, scanning batches in food processing, or documenting procedures at a treatment station. This saves glove changes and reduces the risk of contaminated gloves being reused for screen work without realising it, as the devices can be operated directly through the work gloves. Chemical protection according to EN 374, Category III, Type C Cobalt Pearl is classified as a chemical-protective glove according to EN ISO 374-1, Category III, Type C, and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. A permeation level of 6 was determined for 40 % caustic soda according to EN 374-4, with a degradation rate of minus 5.3 %. For other chemicals, the manufacturer’s product-specific chemical resistance table applies. Tested according to EN 455, PPE Category III Cobalt Pearl complies with EN 455 (Parts 1 to 4) for medical single-use gloves and is manufactured under a quality management system certified to DIN EN ISO 13485:2021. The type examination was carried out according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 by the notified body CCQS (No. 2834); this combination of modules is intended exclusively for the highest PPE Category III. An AQL value of 1.5 applies in the 1,000 ml water-tightness test; furthermore, the glove is food-safe according to the manufacturer. Choosing the right size The manufacturer also assigns a numerical glove size to each Cobalt Pearl standard size, ranging from 5 to 6 for XS to 9 to 10 for XL. SizeManufacturer’s item no.Glove sizeWidthLength XSGP10115-670 mm (± 10 mm)≥ 240 mm SGP10126-780 mm (± 10 mm)≥ 240 mm MGP10137-895 mm (± 10 mm)≥ 240 mm LGP10148-9110 mm (± 10 mm)≥ 240 mm XLGP10159-10120 mm (± 10 mm)≥ 240 mm Cobalt in the twelve-colour Pearl range Cobalt Pearl is one of twelve colours in the Unigloves Pearl range available from us and should not be confused with the lighter Blue Pearl, which is a separate colour with its own data sheet. Those looking for a dark contrasting colour for cleanliness checks will find it in Black Pearl, whilst those preferring a neutral standard colour for general stations will find it in Green Pearl. All colours share the same basic construction of fully dipped nitrile with textured fingertips, a rolled cuff and certification according to EN ISO 374-1 Category III Type C. The manufacturer states touchscreen compatibility for Cobalt Pearl. Use, storage and disposal We can provide storage conditions and shelf life on request. Regarding handling, the manufacturer states that this is a non-sterile, single-use glove that can be worn on either hand. As a practical guideline based on everyday laboratory practice, rather than manufacturer’s specifications: nitrile gloves such as Cobalt Pearl are usually changed for each task or process step, but at the latest at the first visible sign of damage, soiling or contact with chemicals outside the tested application. After use, they are generally disposed of as commercial waste, whilst contaminated gloves are disposed of separately in accordance with internal hazardous substances regulations. Typical applications The touchscreen compatibility makes Cobalt Pearl particularly attractive where digital devices form part of the workflow: Laboratories with digital sample recording or tablet-based documentation at the workplace Food processing with barcode or batch scanners (food contact suitability according to the manufacturer) Medical and dental practices with digital patient documentation at the treatment station Facilities using multiple Unigloves Pearl colours, where Cobalt is specifically used for colour-coding individual stations or process steps Wherever a glove change would otherwise be necessary for every brief interaction with a screen, Cobalt Pearl’s touchscreen compatibility reduces the effort involved without compromising on protective performance or certification. Assessing requirements correctly: from the carton to the digital workplace The carton of 1,000 pieces is divided into 10 boxes of 100 pieces each, so that individual boxes can be made available independently of one another at different workstations. For a workstation with digital documentation and an assumed consumption of 15 gloves per day (changed when switching tasks or samples), one box of 100 covers approximately 6 to 7 working days; a whole carton covers around 13 working weeks. Where there are several digitally equipped workstations, this calculation can be multiplied by the number of workstations to estimate the total requirement for a specific period. Sales are exclusively by the full carton; a single box of 100 cannot be selected separately during the ordering process. Frequently asked questions about the 1,000-piece carton Does the touchscreen really work with every device?The manufacturer generally describes the touchscreen functionality as being suitable for mobile phone and tablet displays. We can provide details on compatibility with individual device models or specific film displays on request. Is Cobalt Pearl latex-free and suitable for people with allergies?Yes. The glove is made entirely of nitrile and, according to the manufacturer, is latex-free, thiuram-free and protein-free. How resistant is the glove to chemicals?The data sheet lists a test chemical with numerical values: 40 % caustic soda with a permeation level of 6 and a degradation rate of minus 5.3 %. We can provide the breakthrough time in minutes on request. Is Cobalt Pearl the same as Blue Pearl?No, they are two distinct colours, each with its own data sheet and manufacturer’s item number; Cobalt is a darker, richer blue than the classic Blue Pearl. How do I find the right size?Either by the numerical glove size (XS 5-6 to XL 9-10) or by the width in millimetres; see the size chart above. Can I order quantities smaller than a 1,000-piece carton?No, the sales unit is the carton of 1,000 pieces, divided into 10 boxes of 100 pieces each. Technical details MaterialNitrile, fully dipped ColourCobalt Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 70 mm (± 10 mm), S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Palm thickness0.09 ± 0.03 mm Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % FeaturesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, touchscreen-compatible according to the manufacturer’s specifications, ambidextrous, food-safe SterilityNon-sterile, for single use StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425, type examination modules B and C2), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Cobalt Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger purchase quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.10 / 100 piece(s))
Unigloves Crossguard Nitrile antimicrobial nitrile glove, GM0104, L
The Unigloves Crossguard Nitrile antimicrobial nitrile glove adds an additional surface technology to the Unigloves range: KluraLabs. Unlike the dyed gloves in the Pearl range, Crossguard is blue in colour and powder-free, fully nitrile-dipped, with textured fingertips and a rolled cuff. The Crossguard Nitrile glove is available in five sizes, from XS to XL. KluraLabs antimicrobial surface technology The Crossguard is fitted with the manufacturer’s KluraLabs antimicrobial surface technology. Its barrier performance against microorganisms has been tested according to EN ISO 374-5, and its chemical protection according to EN ISO 374, Category III, Type C. The thickness is 0.07 mm (± 0.02 mm) at the palm and 0.11 mm (± 0.03 mm) at the fingertip, measured on a single layer in each case. The glove is also thiuram-free and protein-free. Chemical protection according to EN ISO 374, Category III, Type C, with extended AQL test levels Crossguard is classified as Category III, Type C according to EN ISO 374 and complies with EN 455 (Parts 1 to 4) and EN ISO 21420. In testing with 40 % sodium hydroxide solution according to EN ISO 374-4, the highest permeation level 6 was achieved, with a degradation of minus 5.3 %. In addition to the 1,000-ml water-tightness test with an AQL value of 1.5, the data sheet for Crossguard also documents visual inspections for major defects with an AQL of 2.5 and for minor defects with an AQL of 4.0, representing a more comprehensive test programme than for most other gloves in this selection. The glove is manufactured under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). According to the manufacturer, the glove is also food-safe. Sizes with numerical glove sizes The manufacturer also assigns a numerical glove size to each Crossguard standard size: XS corresponds to 5 to 6, S corresponds to 6 to 7, M corresponds to 7 to 8, L corresponds to 8 to 9 and XL corresponds to 9 to 10. The width increases from 75 mm (± 5 mm) for XS, through 85 mm, 95 mm and 106 mm (each ± 5 mm) for S, M and L, up to 120 mm (± 10 mm) for XL, with a length of at least 240 mm across all sizes. The median force at break is at least 6.0 N both before and after artificial ageing. Typical applications The additional antimicrobial surface technology makes Crossguard an attractive option for businesses operating in hygiene-sensitive areas: Areas where hygiene is a key concern and where additional antimicrobial surface technology is desired, such as cleaning or food processing Workplaces where gloves are changed frequently Working with 40 % sodium hydroxide solution and similar chemicals within the scope of the tested EN 374 Category III Businesses that, in addition to their standard range, wish to specifically incorporate a variant featuring additional surface technology Where a standard nitrile glove such as Black Pearl has been used to date, Crossguard can be deployed as a targeted addition for stations with particularly high hygiene requirements. Crossguard compared to the Pearl range Crossguard is not part of the twelve-colour Unigloves Pearl range, but is also a fully dipped nitrile glove with a comparable chemical protection profile. For applications that do not require the additional antimicrobial surface technology, the colour-matched Blue Pearl is available; for a dark contrasting colour, the Black Pearl. Both share the same EN ISO 374 Category III, Type C classification as Crossguard, but differ in terms of surface technology. Technical details MaterialNitrile, fully dipped ColourBlue Manufacturer's packaging100 pieces per box, 10 boxes per carton (standard packaging as per the data sheet) Length≥ 240 mm Width by sizeXS 75 mm (± 5 mm), S 85 mm (± 5 mm), M 95 mm (± 5 mm), L 106 mm (± 5 mm), XL 120 mm (± 10 mm) Glove size per sizeXS 5-6, S 6-7, M 7-8, L 8-9, XL 9-10 Palm thickness0.07 mm (± 0.02 mm) Fingertip thickness0.11 mm (± 0.03 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 (watertightness), 2.5 (visual inspection for major defects), 4.0 (visual inspection for minor defects) Chemical resistance (EN ISO 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % FeaturesPowder-free, latex-free, thiuram-free, protein-free, with KluraLabs antimicrobial surface, textured fingertips, rolled cuff, ambidextrous, food-safe StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374 (Category III, Type C), EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (#2834) Scope of delivery 1 pack = 100 Unigloves Crossguard Nitrile antimicrobial nitrile gloves in the selected size. Can only be ordered by the carton: at least 10 packs (1 carton), then in steps of 10. Individual requirements and procurement service Do you require a different size, larger quantities or advice on a suitable glove variant for your laboratory or business? Our procurement service will be happy to assist you with your selection.
Tempo Healthcare Nitrile Examination Gloves, blue, powder-free, 100 pieces, size L
Medical practices, laboratories and cleaning services have different requirements for disposable gloves. The blue Tempo Healthcare nitrile examination gloves carry information on the box about medical use and chemical protection: According to the print, they are classified as a Class I medical device according to Regulation (EU) 2017/745 and designed as personal protective equipment of Category III with chemical protection according to EN ISO 374-1 Type B. The box bears the om brand, and distribution in Germany is handled by Tempo Healthcare GmbH. The glove is blue, powder-free, non-sterile and intended for single use. Sizes S and L are available, and one box contains 100 pieces. Class I examination glove with EN 455 The box carries a reference to the Medical Devices Regulation (EU) 2017/745, Class I, together with the symbol for medical devices. The four parts of EN 455 are also named. For medical single-use gloves, they cover leak-tightness, physical properties, biological evaluation and the determination of shelf life. The box gives an AQL (acceptable quality limit) of 1.5. The glove is therefore intended for examinations where a medical device is required. Chemical protection according to EN ISO 374-1 Type B (KPT) Type B requires that at least three test chemicals of the standard are passed with permeation level 2 or better. The box names three substances. Sodium hydroxide 40 % (code letter K) achieves level 6, which corresponds to a breakthrough time of more than 480 minutes. Formaldehyde 37 % (T) achieves level 5 (more than 240 minutes), hydrogen peroxide 30 % (P) level 2 (more than 30 minutes). The mean degradation according to EN 374-4 describes how much the glove material changes after contact. It is -38.4 % for K, 46.6 % for T and 17.6 % for P. According to EN ISO 374-5, the glove is tested against viruses (marking VIRUS). Resistance to bacteria and fungi is stated as passed. For the PPE, the box names the EU type examination and the ongoing surveillance by the notified body SATRA Technology Europe Ltd (identification number 2777). The values apply to the stated substances in the tested concentrations. For other chemicals and for mixtures, a separate assessment of the workplace is necessary. Food contact with a restriction The box shows the symbol for food contact. The accompanying text names suitability for handling food, except acidic food, and refers to a test over 2 hours at 40 °C. This is a statement on the packaging. Anyone who has to document food contact in their operation should request the evidence from the manufacturer. Material, fit and allergy information The glove consists of 100 % synthetic nitrile polymer and contains no natural latex. It can be worn on either hand and is at least 240 mm long in all sizes. The box points out that components can trigger allergic reactions in some users. Finding the right size The size depends on the hand width. For each size, the manufacturer states the hand width and a numerical glove size; the tolerance is ± 3 mm in each case. SizeGlove sizeHand widthLength XS676 mm (± 3 mm)at least 240 mm S784 mm (± 3 mm)at least 240 mm M894 mm (± 3 mm)at least 240 mm L9105 mm (± 3 mm)at least 240 mm XL10113 mm (± 3 mm)at least 240 mm Storage and use The gloves are stored cool and dry at -10 °C to 40 °C and protected from sunlight and fluorescent light. Damaged gloves are not used. Each glove is intended for single use only. Typical applications Medical practice and care: examinations with a glove classified as a Class I medical device Laboratory: preparing samples, preparing solutions, handling sodium hydroxide, hydrogen peroxide and formaldehyde at the tested concentrations Cleaning: working with alkalis and peroxides at the tested concentrations Kitchen and food processing: handling food, except acidic food, according to the statement on the box Work areas where the glove colour blue serves as identification Frequently asked questions about the Tempo Healthcare examination gloves Is the glove a medical device?Yes, the box names the classification as a Class I medical device according to Regulation (EU) 2017/745 and the standards EN 455 Parts 1 to 4. What do Type B and KPT mean?Type B stands for at least three passed test chemicals according to EN ISO 374-1. K, P and T are the code letters for sodium hydroxide 40 %, hydrogen peroxide 30 % and formaldehyde 37 %. May the gloves come into contact with food?The box names suitability for handling food, except acidic food. It is a manufacturer’s statement on the packaging. Do the gloves contain natural latex?No, they consist of 100 % synthetic nitrile polymer. Allergic reactions to components are nevertheless possible in some users. Which size do I need?The hand width in millimetres decides, see the table above. A hand with a width of 100 mm lies between M (94 mm) and L (105 mm). How many gloves does a box contain?100 pieces, i.e. 50 pairs. Technical details Material100 % synthetic nitrile polymer, no natural latex ColourBlue Brand on the boxom Packaging100 pieces per box Lengthat least 240 mm (all sizes) Hand width per sizeXS 76 mm, S 84 mm, M 94 mm, L 105 mm, XL 113 mm (± 3 mm in each case) Glove size by sizeXS 6, S 7, M 8, L 9, XL 10 AQL1.5 Chemical resistance (EN ISO 374-1, EN 16523-1, degradation EN 374-4)Sodium hydroxide 40 % (K) Level 6, mean degradation -38.4 %; hydrogen peroxide 30 % (P) Level 2, mean degradation 17.6 %; formaldehyde 37 % (T) Level 5, mean degradation 46.6 % Microorganisms (EN ISO 374-5)Virus; bacteria and fungi passed PropertiesPowder-free, ambidextrous SterilityNon-sterile, for single use only StandardsEN 455 Parts 1 to 4, EN ISO 374-1:2016 (Type B, KPT), EN ISO 374-5:2016, EN 420:2003+A1:2009 Medical deviceClass I (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425), notified body SATRA Technology Europe Ltd (2777) Food contactStatement on the box, except acidic food Storage-10 °C to 40 °C, cool and dry, protected from sunlight and fluorescent light Scope of delivery 1 box with 100 pieces of Tempo Healthcare nitrile examination gloves, blue (size according to variant selection) Regulatory information The glove bears the CE mark with the identification number 2777. According to the print, it is a Class I medical device according to Regulation (EU) 2017/745 and personal protective equipment of Category III according to Regulation (EU) 2016/425. The standards named are EN 455 Parts 1 to 4, EN ISO 374-1:2016 (Type B), EN ISO 374-5:2016 and EN 420:2003+A1:2009. The notified body for the PPE is SATRA Technology Europe Ltd, Bracetown Business Park, Clonee, D15YN2P, Ireland. The statement on food contact is a manufacturer’s statement. The manufacturer is Blue Sail Medical Co., Ltd., No.21 Qingtian Rd, Qilu Chemical Industrial Park, Zibo, Shandong Province, 255414 P.R. China. The EU authorised representative is Lotus NL B.V., Koningin Julianaplein 10, le Verd, 2595AA The Hague, Netherlands, email peter@lotusnl.com. Distribution in Germany: Tempo Healthcare GmbH, Kunibertstraße 6, 59457 Werl, telephone +49 2922 927539-0, email info@tempohealthcare.de. Individual requirements & procurement service Do you need a different size, a different glove material or larger purchase quantities? Our procurement service helps with the selection. You can find further gloves in the Nitrile Gloves category. Another blue nitrile examination glove is the Unigloves Blue Pearl (XS to XL).
Unigloves Violet Pearl Nitrile Gloves, Violet, Powder-free, Size XL, GP0075
The Unigloves Violet Pearl nitrile gloves add a cool shade of violet to the Pearl range, which stands out clearly from warmer colours such as orange or yellow. They are powder-free, latex-free, thiuram-free and protein-free, fully nitrile-dipped, with textured fingertips and a rolled cuff. The Violet Pearl nitrile gloves are sold in a carton containing 1,000 gloves (10 boxes of 100 each), in five sizes from XS to XL. A thickness of 0.07 mm and a narrow width tolerance Like Mint Pearl, Violet Pearl is also one of the colours with the tighter manufacturing tolerance of ± 3 mm: The width is 76 mm for XS, 84 mm for S, 94 mm for M, 105 mm for L and 113 mm for XL, in each case within this tolerance. The thickness at the palm is 0.07 mm (± 0.02 mm); no figures are available for the fingertips or cuff. The length is at least 240 mm in all sizes, and the median force at break is at least 6.0 N both before and after artificial ageing. Tested according to EN 455 and EN ISO 374, Category III, Type C Violet Pearl is classified as a Category III, Type C chemical-resistant glove according to EN ISO 374-1 and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. In a test with 40 % sodium hydroxide solution according to EN 374-4, the highest permeation level 6 was achieved, with a degradation of minus 5.3 %. Manufacturing takes place under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Module B and Module C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). The AQL value of 1.5 in the watertightness test describes the watertightness of the glove; according to the manufacturer, it is also food-safe. Typical applications Violet Pearl is suitable as a standalone marking colour wherever a work area needs to stand out clearly from neighbouring stations: Businesses that use violet as a distinct colour alongside other Pearl colours, for example for specialised or special processes Food processing (food-safe according to the manufacturer) Working with 40 % sodium hydroxide solution and similar chemicals within the scope of the tested EN 374 Category III Firms operating within a narrow size range that benefit from a manufacturing tolerance of ± 3 mm For example, violet can be specifically reserved for a single station, whilst the remaining areas of a facility remain colour-coded with other Pearl colours. Packaging and handling Like the other nitrile gloves in the Pearl range, Violet Pearl is a non-sterile, single-use glove that can be worn on either hand. As the carton is divided into 10 boxes of 100 gloves each, only one box can be opened at a time and made available at a single workstation, whilst the remaining nine boxes remain unopened and within easy reach in the storeroom until they are needed. Violet Pearl in the Pearl family Violet Pearl is one of twelve colours in our Unigloves Pearl range. In the neighbouring colour spectrum, Magenta Pearl has a warmer shade of pink and Cobalt Pearl a cooler, stronger shade of blue. All colours in the range share the same basic construction, made from fully-dipped nitrile, but differ, according to their respective data sheets, in details such as material thickness, width tolerance and scope of certification. Technical details MaterialNitrile, fully dipped ColourViolet Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width by sizeXS 76 mm (± 3 mm), S 84 mm (± 3 mm), M 94 mm (± 3 mm), L 105 mm (± 3 mm), XL 113 mm (± 3 mm) Palm thickness0.07 mm (± 0.02 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % FeaturesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous, food-safe StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (#2834) Scope of delivery 1 carton = 10 boxes of 100 each = 1,000 Unigloves Violet Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you need a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you in making a suitable selection.
Content: 1000 piece(s) (€6.00 / 100 piece(s))
Unigloves Uniprotect Blue Nitrile Gloves, blue, powder-free, 100 pieces, size M, 5503
Sodium hydroxide, hydrogen peroxide and formaldehyde are components of many cleaning and disinfecting agents. The data sheet of the Unigloves Uniprotect Blue contains measured values for all three substances. The glove is designed as a Type B chemical protection glove according to EN ISO 374-1 and is personal protective equipment of Category III. It is made of nitrile, is blue, powder-free and non-sterile. The fingertips are roughened and the cuff is rolled. The glove is available in sizes S to XL, and one pack contains 100 pieces. Chemical protection according to EN ISO 374-1 Type B Type B requires that at least three test chemicals of the standard are passed with permeation level 2 or better. The Uniprotect Blue was tested with three substances. Sodium hydroxide 40 % (code letter K) achieves level 6, which corresponds to a breakthrough time of more than 480 minutes. Hydrogen peroxide 30 % (P) achieves level 2 (more than 30 minutes), formaldehyde 37 % (T) level 5 (more than 240 minutes). According to EN ISO 374-5, the glove is also tested against viruses, fungi and bacteria. Conformity is based on an EU type examination (Module B) by SATRA Technology Europe, notified body 2777, and on Module C2 of the PPE Regulation (EU) 2016/425. The values apply to the stated substances in the tested concentrations. For other chemicals and for mixtures, a separate assessment of the workplace is necessary. Two AQL values for two tests The manufacturer states the AQL for each test. For the watertightness test with 1,000 ml (inspection level G-1), AQL 2.5 applies. For the visual inspection for major defects (inspection level G-1), AQL 1.5 applies, for the visual inspection for minor defects AQL 4.0. Dimensions are checked at inspection level S-2 with AQL 4.0. Anyone who requires AQL 1.5 for leak-tightness in a specification will therefore find the value 2.5 for this glove. Thickness, surface and force at break The thickness is stated as a minimum value for a single layer. At the cuff (25 mm from the rolled edge) it is at least 0.04 mm, in the centre of the palm at least 0.06 mm and at the fingertip (15 mm from the tip of the middle finger) at least 0.07 mm. The median force at break is at least 6.0 N before and after ageing. The gloves can be worn on either hand and are at least 240 mm long. Finding the right size There are four sizes. For each size, the manufacturer states the width of the hand and a numerical glove size. Sizes XS and XXL are not part of this range. SizeManufacturer’s item no.Glove sizeWidthLength S55026 to 780 to 90 mmat least 240 mm M55037 to 890 to 100 mmat least 240 mm L55048 to 9100 to 110 mmat least 240 mm XL55059 to 10110 to 120 mmat least 240 mm Blue and food-safe according to the manufacturer Blue is suitable as colour coding for a work area. Blue gloves are common in food processing because the colour rarely occurs in food and a fragment is more likely to be noticed. The manufacturer describes the Uniprotect Blue as food-safe. Classification as personal protective equipment The data sheet lists the Uniprotect Blue as a chemical protection glove of PPE Category III. Testing according to EN 455 and classification as a medical device are not mentioned in it. Where a medical device is required, for example for examinations on patients, a glove with this classification is to be chosen. A blue nitrile glove for this purpose is the Unigloves Blue Pearl, which the manufacturer lists in its declaration of conformity as a Class I medical device. Typical applications Cleaning work with sodium hydroxide 40 % Handling hydrogen peroxide 30 % or formaldehyde 37 %, for example when preparing and decanting solutions Laboratory work with samples where protection against viruses, bacteria and fungi according to EN ISO 374-5 is called for Food processing with colour coding (food-safe according to the manufacturer) Frequently asked questions about Uniprotect Blue Which AQL value applies to leak-tightness?For the watertightness test with 1,000 ml, the data sheet gives AQL 2.5. AQL 1.5 applies to the visual inspection for major defects. Is the glove a medical device?The data sheet names no classification as a medical device and no testing according to EN 455. The glove is personal protective equipment of Category III. What do Type B and KPT mean?Type B stands for at least three passed test chemicals according to EN ISO 374-1. K, P and T are the code letters for sodium hydroxide 40 %, hydrogen peroxide 30 % and formaldehyde 37 %. How do I find the right size?Via the width of the hand in millimetres or the numerical glove size, see the table above. How many gloves does a pack contain?100 pieces, i.e. 50 pairs. The manufacturer packs ten packs into one carton. Technical details MaterialNitrile ColourBlue Packaging100 pieces per pack, 10 packs per carton Lengthat least 240 mm Width per sizeS 80 to 90 mm, M 90 to 100 mm, L 100 to 110 mm, XL 110 to 120 mm Glove size by sizeS 6 to 7, M 7 to 8, L 8 to 9, XL 9 to 10 Cuff thicknessat least 0.04 mm (single layer) Palm thicknessat least 0.06 mm (single layer) Fingertip thicknessat least 0.07 mm (single layer) Median force at break (before and after ageing)at least 6.0 N AQL watertightness (1,000 ml, G-1)2.5 AQL visual inspection (G-1)1.5 for major defects, 4.0 for minor defects AQL dimensions (S-2)4.0 Chemical resistance (EN ISO 374-1, EN ISO 374-4)Sodium hydroxide 40 % (K) Level 6, degradation -29.9 %; hydrogen peroxide 30 % (P) Level 2, degradation 18.8 %; formaldehyde 37 % (T) Level 5, degradation 10.8 % FeaturesPowder-free, roughened fingertips, rolled cuff, ambidextrous SterilityNon-sterile StandardsEN ISO 374-1 (Type B, KPT), EN ISO 374-5, EN ISO 21420 PPE categoryIII (Regulation (EU) 2016/425, EU type examination module B, module C2) Scope of delivery 1 pack with 100 pieces of Unigloves Uniprotect Blue nitrile gloves (size according to variant selection) Regulatory information The Uniprotect Blue is personal protective equipment of Category III according to Regulation (EU) 2016/425. The EU type examination (Module B) was carried out by SATRA Technology Europe, Bracetown Business Park, Clonee, D15 YN2, Ireland (notified body 2777), and Module C2 applies in addition. The standards applied according to the data sheet are EN ISO 374-1 (Type B), EN ISO 374-5 and EN ISO 21420. The glove is CE-marked with the identification number 2777. The manufacturer is Unigloves Arzt- & Klinikbedarf Handelsgesellschaft mbH, Camp-Spich-Straße 71, 53842 Troisdorf. The statement on suitability for food contact is a manufacturer’s statement. Individual requirements & procurement service Do you need a different size, a glove classified as a medical device, or larger purchase quantities? Our procurement service helps with the selection. You can find further gloves in the Nitrile Gloves category.
AMPri Style Black Nitrile Gloves, black, powder-free, 100 pieces, size XXL, 01181-XXL
Gloves used in laboratories and kitchens need evidence for both areas: chemical protection on the one hand, food contact on the other. Both are documented for the AMPri Style Black. According to the data sheet, it is also classified as a Class I medical device and designed as personal protective equipment of Category III with chemical protection according to EN ISO 374-1 Type B. The glove is black, powder-free and made of nitrile. It is available in sizes XS to XXL, and one pack contains 100 pieces. Nitrile gloves as a Class I medical device AMPri lists the Style Black as a nitrile examination glove. It is classified as Class I according to Annex VIII of Regulation (EU) 2017/745 and, according to the data sheet, meets standards EN 455-1 to EN 455-4. In the water leak test according to EN 455-1, the AQL is below 1.5 (sampling inspection according to ISO 2859-1, general inspection level I). The gloves are non-sterile and intended for single use. Chemical protection according to EN ISO 374-1 Type B (KPT) Type B means that a glove passes at least three test chemicals of the standard at permeation level 2 or better. The data sheet lists three substances. Sodium hydroxide 40 % (code letter K) achieves level 6, which corresponds to a breakthrough time of more than 480 minutes. Hydrogen peroxide 30 % (P) achieves level 2 (more than 30 minutes), formaldehyde 37 % (T) achieves level 5 (more than 240 minutes). According to EN ISO 374-5, the glove is also impermeable to bacteria, fungi and viruses (testing according to ISO 16604, procedure B). The values come from laboratory tests on samples taken from the palm. According to the manufacturer, the actual duration of protection can differ significantly depending on temperature, abrasion and stretching, and likewise for mixtures. A separate risk assessment remains necessary for the specific workplace. Food contact with declaration of conformity For the Style Black, AMPri issued a declaration of conformity for materials in contact with food on 28 October 2025. It refers to Regulation (EC) No 1935/2004, Regulation (EU) No 10/2011, the LFGB and BfR Recommendation XXI. According to the declaration, the gloves may be in direct contact with all types of food for a short time; the declaration states no restrictions. The overall migration is below 3 mg/dm², the limit is 10 mg/dm². Thickness, surface and fit The thickness is 0.06 mm at the cuff, 0.07 mm on the palm and 0.10 mm at the fingertips. The fingertips are textured, and the inside of the glove is chlorinated. The fit is ambidextrous, and the length is at least 240 mm for all sizes. Choosing the right size The manufacturer assigns a numerical glove size to each size. XXL corresponds to glove sizes 10 to 11 and has a width of 125 mm (± 10 mm). For comparison, the black gloves Meditrade Nitril Black (S to XL) and Unigloves Black Pearl (XS to XL) end one size earlier. SizeManufacturer’s item no.Glove sizeWidthLength XS01181-XS5 to 680 mm or lessat least 240 mm S01181-S6 to 780 mm (± 10 mm)at least 240 mm M01181-M7 to 895 mm (± 10 mm)at least 240 mm L01181-L8 to 9110 mm (± 10 mm)at least 240 mm XL01181-XL9 to 10115 mm (± 10 mm)at least 240 mm XXL01181-XXL10 to 11125 mm (± 10 mm)at least 240 mm Information on allergies, storage and disposal The data sheet points out that the glove contains dithiocarbamates, which can trigger allergic reactions. The gloves are stored in their original packaging, cool and dry, protected from sunlight and not near sources of ozone such as laser printers or photocopiers. The manufacturer does not specify a general shelf life; the expiry date is printed on the packaging. Before use, the gloves are to be checked for holes and damage. After contact with chemicals, disposal is governed by the regulations for the chemical concerned. Unused gloves can be disposed of with household waste. Disinfection of the gloves is not provided for. Typical applications Laboratory: preparing solutions, preparing samples, handling alkalis and peroxides at the tested concentrations Kitchen and food processing: portioning and serving food Medical practice and care: examinations with a glove classified as a Class I medical device Cleaning: working with sodium hydroxide, hydrogen peroxide or formaldehyde at the tested concentrations Studios and practices where a black glove is desired Frequently asked questions about the Style Black Is the Style Black a medical device?Yes, according to the data sheet, it is a Class I medical device according to Regulation (EU) 2017/745. It meets EN 455-1 to EN 455-4. May the glove come into contact with all types of food?According to the manufacturer’s declaration of conformity of 28 October 2025, short-term direct contact with all types of food is possible. The declaration states no restrictions. What do Type B and KPT mean?Type B stands for at least three passed test chemicals of EN ISO 374-1. K, P and T are the code letters of the three substances, here sodium hydroxide 40 %, hydrogen peroxide 30 % and formaldehyde 37 %. Does the glove contain substances that can trigger allergies?The data sheet refers to dithiocarbamates, which can trigger allergic reactions. It names nitrile as the material. How many gloves does a pack contain?100 pieces, i.e. 50 pairs. The manufacturer packs ten packs into one outer carton. What is the shelf life of the gloves?The manufacturer does not specify a general expiry period; it depends on the conditions of use. The expiry date is printed on the packaging. Technical details MaterialNitrile, chlorinated on the inside ColourBlack Packaging100 pieces per pack, 10 packs per outer carton Lengthat least 240 mm (all sizes) Width per sizeXS 80 mm or less, S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL 115 mm (± 10 mm), XXL 125 mm (± 10 mm) Glove size by sizeXS 5 to 6, S 6 to 7, M 7 to 8, L 8 to 9, XL 9 to 10, XXL 10 to 11 Cuff thickness0.06 mm Palm thickness0.07 mm Fingertip thickness0.10 mm AQL (water leak test, EN 455-1)less than 1.5 Chemical resistance (EN ISO 374-1, EN ISO 374-4)Sodium hydroxide 40 % (K) Level 6, degradation 15.1 %; hydrogen peroxide 30 % (P) Level 2, degradation -74.1 %; formaldehyde 37 % (T) Level 5, degradation 24.0 % PropertiesPowder-free, finger-textured, ambidextrous SterilityNon-sterile, for single use StandardsEN 455-1 to EN 455-4, EN ISO 374-1 (Type B, KPT), EN ISO 374-4, EN ISO 374-5, EN ISO 21420 Medical deviceClass I (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Food contactDeclaration of conformity of 28 October 2025, all types of food Pack dimensions (L x W x H)215 x 120 x 60 mm Pack weight, size XXL460 g net, 520 g gross Scope of delivery 1 pack with 100 pieces of AMPri Style Black nitrile gloves (size according to variant selection) Regulatory information The Style Black is a Class I medical device according to Annex VIII of Regulation (EU) 2017/745 with the standards EN 455-1 to EN 455-4. At the same time, it is personal protective equipment of Category III according to Regulation (EU) 2016/425 with the standards EN ISO 374-1 (Type B), EN ISO 374-5 and EN ISO 21420. The glove is CE-marked. For food contact, a declaration of conformity of the manufacturer dated 28 October 2025 is available (Regulation (EC) No 1935/2004, Regulation (EU) No 10/2011, LFGB, BfR Recommendation XXI). The manufacturer is AMPri Handelsgesellschaft mbH, Benzstraße 16, 21423 Winsen (Luhe), SRN DE-MF-000007622. Individual requirements & procurement service Do you need a different size, a different glove material or larger purchase quantities? Our procurement service helps with the selection. You can find further gloves in the Nitrile Gloves category.
Unigloves Yellow Pearl Nitrile Gloves, Yellow, Powder-free, Size M, GP0113
The Unigloves Yellow Pearl nitrile gloves come in yellow, one of the classic signal colours in the Pearl range, and also state a manufacturing tolerance: the width tolerance is ± 10 mm across all five sizes. They are powder-free, latex-free, thiuram-free and protein-free, fully nitrile-dipped, with textured fingertips and a rolled cuff. The Yellow Pearl nitrile gloves are sold in cartons of 1,000 pieces (10 boxes of 100 pieces each), in five sizes from XS to XL. 0.09 mm thick with a generous fit The width of Yellow Pearl gloves ranges from 70 mm for XS, through 80 mm, 95 mm and 110 mm for S, M and L, up to 120 mm for XL, each with a tolerance of ± 10 mm, a generous fit. The thickness at the palm is 0.09 mm (± 0.03 mm); the data sheet does not specify values for the fingertips or cuff. The length is at least 240 mm in all sizes, and the median force at break is at least 6.0 N both before and after artificial ageing. Tested according to EN 455 and EN ISO 374, Category III, Type C Yellow Pearl is classified as a Category III, Type C chemical protection glove according to EN ISO 374-1 and also provides protection against viruses, fungi and bacteria according to EN ISO 374-5. In a test with 40 % sodium hydroxide solution according to EN 374-4, the highest permeation level 6 was achieved, with a degradation rate of minus 5.3 %. Manufacturing takes place under a quality management system certified to DIN EN ISO 13485:2021; the type examination according to Modules B and C2 of the PPE Regulation (EU) 2016/425 is carried out by CCQS (Notified Body 2834). The AQL value of 1.5 in the watertightness test describes the watertightness of the glove; according to the manufacturer, it is also food-safe. Typical applications The eye-catching signal colour and generous fit make Yellow Pearl a practical choice in a range of situations: Warning zones and marking stations where a highly visible signal colour is required Cleaning and domestic services, where yellow is traditionally used as a colour-coding system Food processing (food-safe according to the manufacturer) Work involving 40 % sodium hydroxide solution and comparable chemicals, within the scope of the tested EN 374 Category III The generous width tolerance of ± 10 mm per size can also be helpful when staff with different hand shapes are required to use the same size. Application and packaging Like the other nitrile gloves in the Pearl range, Yellow Pearl is a non-sterile, single-use glove that can be worn on either hand. The carton of 1,000 pieces, divided into 10 boxes of 100 pieces each, is suitable for businesses with regular consumption, such as laboratories, medical practices or workshops with multiple workstations, as individual boxes can be made available independently at different stations. Yellow Pearl in the Pearl range Yellow Pearl is one of twelve colours in the Unigloves Pearl range available from us. Orange Pearl is available as a related warm signal colour, whilst Black Pearl provides a dark contrast to yellow. All colours in the range share the same basic construction made from fully dipped nitrile, but differ, according to their respective data sheets, in details such as material thickness, width tolerance and scope of certification. Technical details MaterialNitrile, fully dipped ColourYellow Packaging100 pieces per box, 10 boxes per carton (1,000 pieces in total) Length≥ 240 mm Width per sizeXS 70 mm (± 10 mm), S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL 120 mm (± 10 mm) Thickness (palm)0.09 mm (± 0.03 mm) Median force at break (before/after ageing)min. 6.0 N AQL1.5 Chemical resistance (EN 374-4)Sodium hydroxide (caustic soda) 40 %, permeation level 6, degradation -5.3 % PropertiesPowder-free, latex-free, thiuram-free, protein-free, textured fingertips, rolled cuff, ambidextrous StandardsEN ISO 21420, EN 455 (Parts 1-4), EN ISO 374-1 (Category III, Type C), EN 374-4, EN ISO 374-5 PPE categoryIII (EU Regulation 2016/425), notified body CCQS (No. 2834) Scope of delivery 1 carton = 10 boxes of 100 pieces each = 1,000 pieces Unigloves Yellow Pearl nitrile gloves (size as per variant selection) Individual requirements and procurement service Do you require a different size, a different colour from the Unigloves Pearl range, or larger quantities for your laboratory or business? Our procurement service will be happy to support you with the suitable selection.
Content: 1000 piece(s) (€5.90 / 100 piece(s))
Unigloves White Pearl Nitrile Gloves, white, powder-free, 100 pieces, size XL, GP0025
In laboratories and medical practices, gloves are often changed several times an hour. Unigloves White Pearl nitrile gloves come in a dispenser box with 100 pieces. They are white, powder-free and made of nitrile. According to the manufacturer’s declaration of conformity, they are a Class I medical device and at the same time personal protective equipment of Category III with chemical protection according to EN ISO 374-1 Type C. They are available in sizes XS to XL. Class I medical device according to EN 455 The manufacturer’s declaration of conformity lists the White Pearl in the product family of examination gloves, risk class I according to Annex VIII of Regulation (EU) 2017/745. EN 455-1, EN 455-2, EN 455-3 and EN 455-4 are applied. As the intended purpose, the declaration names the protection of patients, users and third parties from diseases as well as temporary protection against bacteria, fungi, viruses and certain chemicals. The non-sterile single-use gloves can be used in the laboratory, in the medical sector and in the industrial sector. The specification sheet names three tests with AQL: Watertightness with 1,000 ml is tested according to EN 455-1 at AQL 1.5 (inspection level G-1). Visible defects are checked at AQL 2.5 (G-1), dimensions and physical properties at AQL 4.0 (S-2). Chemical protection Type C: tested against sodium hydroxide Type C means that the glove passes one test chemical of the standard EN ISO 374-1. For the White Pearl, this is sodium hydroxide 40 % (code letter K). It achieves permeation level 6, which corresponds to a breakthrough time of more than 480 minutes, with a degradation of minus 5.3 % according to EN ISO 374-4. In addition, the glove is tested against bacteria, fungi and viruses according to EN ISO 374-5 and meets EN ISO 21420. For other chemicals, the manufacturer gives no measured values. Anyone working with hydrogen peroxide, formaldehyde or other substances selects the glove on the basis of Type A or Type B and the measured values stated there. Thickness, surface and powder The thickness is 0.05 mm at the cuff, 0.07 mm on the palm and 0.10 mm at the fingertips, measured as a single wall in each case. The surface is micro-rough, the cuff is rolled and the fit is ambidextrous. Residual powder is at most 2.0 mg per glove. According to the specification sheet, the glove contains no proteins. A glove of size M weighs 3.5 g. The median force at break is at least 6.0 N before and after ageing. The tensile strength is at least 14 MPa, the elongation at break before ageing at least 500 % and afterwards at least 400 %. The manufacturer gives a shelf life of 5 years. Manufacture is according to ISO 9001 and ISO 13485. Accelerators and allergies The material is nitrile, and according to the manufacturer the glove is latex-free. However, the manufacturer points out that it contains accelerators, which can trigger allergic reactions. In the case of known allergies, use is to be clarified beforehand. Food contact according to the manufacturer The manufacturer’s specification sheet (as of 10/2025) lists ‘Food approved’ under the standards. This is a manufacturer’s statement on the glove. Which size fits? Five sizes from XS to XL, each with its own item number. The glove size rises from 6 for XS to 10 for XL. There is no size XXL for this glove. SizeManufacturer’s item no.Glove sizeWidthLength XSGP0021680 mm or lessat least 240 mm SGP0022780 mm (± 10 mm)at least 240 mm MGP0023895 mm (± 10 mm)at least 240 mm LGP00249110 mm (± 10 mm)at least 240 mm XLGP002510110 mm or moreat least 240 mm Typical applications Laboratory: sample preparation and work with sodium hydroxide 40 % Medical practice and care: examinations with a glove classified as a Class I medical device Industry: tasks where protection against sodium hydroxide 40 % is sufficient Kitchen and food processing (according to the manufacturer: ‘Food approved’) Other colours of the Pearl range include, among others, Blue Pearl, Black Pearl and Mint Pearl in cartons of 1,000 pieces. Frequently asked questions about White Pearl Is the White Pearl a Type B glove?No, according to the declaration of conformity it is Type C. Only sodium hydroxide 40 % (code letter K) is tested, not KPT. Can I use the glove with food?In its specification sheet, the manufacturer lists ‘Food approved’. This is a manufacturer’s statement. Is the glove latex-free?According to the manufacturer, yes, the material is nitrile. However, the glove contains accelerators, which can trigger allergic reactions. What is the shelf life of the gloves?According to the specification sheet, 5 years. How many gloves does a dispenser box contain?100 pieces, i.e. 50 pairs. The manufacturer packs ten dispenser boxes into one carton. Technical details MaterialNitrile ColourWhite Packaging100 pieces per dispenser box, 10 dispenser boxes per carton Lengthat least 240 mm Width per sizeXS 80 mm or less, S 80 mm (± 10 mm), M 95 mm (± 10 mm), L 110 mm (± 10 mm), XL 110 mm or more Glove size by sizeXS 6, S 7, M 8, L 9, XL 10 Cuff thickness0.05 mm Palm thickness0.07 mm Fingertip thickness0.10 mm Weight per glove3.5 g (size M) Median force at break (before and after ageing)at least 6.0 N Tensile strength (before and after ageing)at least 14 MPa Elongation at breakat least 500 % before ageing, at least 400 % after ageing Residual powderat most 2.0 mg per glove AQLWatertightness (1,000 ml, G-1) 1.5; visible defects (G-1) 2.5; dimensions and physical properties (S-2) 4.0 Chemical resistance (EN ISO 374-1, EN ISO 374-4)Sodium hydroxide 40 % (K) Level 6, degradation -5.3 % FeaturesPowder-free, micro-rough, rolled cuff, ambidextrous SterilityNon-sterile Shelf life5 years according to the manufacturer StandardsEN 455-1 to EN 455-4, EN ISO 374-1 (Type C), EN ISO 374-4, EN ISO 374-5, EN ISO 21420 Medical deviceClass I (Regulation (EU) 2017/745) PPE categoryIII (Regulation (EU) 2016/425) Scope of delivery 1 dispenser box with 100 pieces of Unigloves White Pearl nitrile gloves (size according to variant selection) Regulatory information The White Pearl is a Class I medical device according to Annex VIII of Regulation (EU) 2017/745 (Basic UDI-DI 4260503143710R3). The manufacturer’s declaration of conformity (revision 5 of 16 July 2026) names the item numbers GP0021 to GP0025 and the standards EN 455-1 to EN 455-4. As personal protective equipment of Category III according to Regulation (EU) 2016/425, EN ISO 374-1 Type C (test chemical sodium hydroxide 40 %) applies, together with EN ISO 374-4, EN ISO 374-5 and EN ISO 21420. The EU type examination certificate CE-PI-20230418-01-01-9B was issued by CCQS Certification Services Limited (notified body 2834). It is valid until 26 April 2028, and manufacture is subject to Module C2. The manufacturer is Unigloves Arzt- & Klinikbedarf Handelsgesellschaft mbH, Camp-Spich-Straße 71, 53842 Troisdorf-Spich, SRN DE-MF-000013340. Individual requirements & procurement service Do you need a different colour, a different glove material or larger purchase quantities? Our procurement service helps with the selection. You can find further gloves in the Nitrile Gloves category.