Bandelin SONOREX D 52 lid for SUPER RK and DIGITEC DT

SONOREX SUPER RK 52 H, ultrasonic bath with heating for laboratories and medical practices The Bandelin SONOREX SUPER RK 52 H is a compact ultrasonic bath with heating for everyday use in laboratories, medical practices and workshops. With an operating frequency of 35 kHz and a tank capacity of 1.8 litres (usable capacity 1.2 litres), the unit is suitable for the gentle cleaning of instruments, laboratory glassware and small parts, as well as for the degassing of solvents prior to analytical applications. The integrated heating system allows the cleaning effect to be specifically enhanced for temperature-sensitive contaminants, without the need for a separate heating unit. The ultrasonic tank and housing are made of 1.4301 stainless steel with a wall thickness of 0.8 mm, which allows high resistance to the cleaning and disinfecting agents commonly used in laboratories and instrument reprocessing. A fill-level mark in the tank facilitates correct filling with cleaning fluid during day-to-day use. SweepTec technology and practical operation The SONOREX SUPER RK 52 H features the SweepTec function: automatic frequency adjustment prevents the formation of standing waves in the tank, thereby ensuring more uniform cavitation and, consequently, a more consistent cleaning result throughout the entire tank volume. The heating is continuously adjustable from 30 to 80 °C; the timer covers a range of 1 to 15 minutes (± 5 %) and can also be set to continuous operation when longer cleaning or degassing cycles are required. Operation is via rotary knobs; the mains cable is permanently attached to the unit and is designed for operation at 230 V~ (± 10 %), 50/60 Hz. Technical details Ultrasonic frequency35 kHz Ultrasonic powerPeak power 240 W, rated power (effective) 60 W Heating power140 W Temperature range30–80 °C Timer1–15 min, ± 5 %, plus continuous operation (∞) Tank/housing materialStainless steel 1.4301, wall thickness 0.8 mm External dimensions (L x W x H)175 × 165 × 225 mm Internal dimensions (L x W x D)150 × 140 × 100 mm CapacityCapacity 1.8 l, usable capacity 1.2 l Weight3.3 kg Degree of protectionIP 32 Operating voltage230 V~ (± 10 %), 50/60 Hz ConformityClass I medical device in accordance with Regulation (EU) 2017/745, Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 52 H ultrasonic bath with heater, including permanently attached mains cable (2 m) Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or cleaning and disinfection concentrates, a different tank size or a bespoke configuration for your SONOREX SUPER RK 52 H? Through our bespoke procurement service, we will assist you in selecting and procuring suitable solutions for your specific laboratory requirements.

SONOREX SUPER RK 52 ultrasonic bath for everyday laboratory use The SONOREX SUPER RK 52 ultrasonic bath from Bandelin is a compact benchtop unit designed for laboratories, medical practices and workshops where instruments, glassware and small parts need to be cleaned quickly and gently. With an operating frequency of 35 kHz and a nominal power of 60 W (peak power 240 W), the unit generates a fine, uniform cavitation field that reaches even hard-to-access areas such as boreholes, cannulas or threads. The robust tank and housing are made of 1.4301 stainless steel and are therefore designed for daily use in a laboratory environment. Versatile use: instruments, laboratory glassware and solvents Typical applications for an ultrasonic bath of this size include the pre-cleaning and preparation of laboratory instruments prior to sterilisation, the cleaning of laboratory glassware, pipettes and small components, and the degassing of solvents and aqueous solutions prior to analytical applications. With a volume of 1.8 litres and a working capacity of 1.2 litres, the SONOREX SUPER RK 52 is particularly suitable for smaller batches and occasional use at workstations with limited space. The time selection range of 1 to 15 minutes (± 5 %) and the option for continuous operation allow the treatment duration to be tailored to the items being cleaned, controlled via a simple rotary knob without the need for complex menu navigation. SweepTec technology for consistent cleaning results The fully automatic SweepTec function prevents standing waves in the ultrasonic field and ensures that the ultrasonic energy is distributed evenly throughout the tank. This prevents so-called ‘hot spots’ and uneven cleaning results, an advantage that is particularly relevant for delicate items such as fine instruments or glassware. A fill-level mark makes it easier to fill the tank correctly, whilst the permanently attached 2-metre power cable ensures flexible positioning at the workplace. Technical details Ultrasonic frequency35 kHz Ultrasonic powerRated power 60 W, peak power 240 W Time selection1 – 15 min (± 5 %) and continuous operation (∞), operated via a rotary knob Volume / Working capacity1.8 l / 1.2 l Tank and housing materialStainless steel 1.4301, tank thickness 0.8 mm External dimensions (L x W x H)175 x 165 x 225 mm Internal dimensions (L x W x D)150 x 140 x 100 mm Weight3.1 kg Enclosure protection ratingIP 32 Operating voltage230 V~ (± 10 %), 50/60 Hz CE conformityClass I medical device (Regulation (EU) 2017/745), Low Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EU Scope of delivery 1x Bandelin SONOREX SUPER RK 52 ultrasonic bath Operating instructions Individual requirements & procurement service Do you require suitable accessories such as baskets, lids or compatible cleaning and disinfection concentrates, a different model from the SONOREX range, or personalised advice on selecting the right ultrasonic bath for your application? We can assist you with the procurement of suitable laboratory equipment and accessories. You can find details at our procurement service.

The inner dimensions of the Bandelin SONOREX DIGITEC DT 52 tank are 150 x 140 x 100 mm, and its total capacity is 1.8 l. Compared to the DT 31, the bath is roughly twice as large and also features the DEGAS degassing function. The DT 52 does not have a built-in heater.Tank and installationThe working capacity is 1.2 l, and there is a fill-level mark. The tank (0.8 mm) and housing are made of 1.4301 stainless steel. The unit measures 175 x 165 x 225 mm externally, weighs 2.4 kg and has no handles or drain. The mains cable is 2 m long and permanently attached to the unit; the protection rating is IP 33.Ultrasonic with 240 watts peak powerThe single transducer operates at 35 kHz and achieves a peak power of 240 watts at a rated power of 60 watts. SweepTec works fully automatically to counteract standing waves in the ultrasonic field, and the pulse function complements this. The DEGAS degassing function is activated at the start of the cleaning process and is designed to enhance the effect of the ultrasound.Buttons, display and timerTime and functions are selected via wipe-clean buttons; the display shows the remaining cleaning time. The timer runs for 1, 2, 3, 4, 5, 10, 15 or 30 minutes (± 5 %), or alternatively in continuous operation. The unit switches off after 12 hours if no button is pressed. If you also need to control the bath temperature, choose the DT 52 H, which has an identical tank.Holders for samples and flasksBandelin offers the RG 2 test tube holder (for six test tubes up to 25 mm in diameter or eight up to 16 mm) and the RG 2.2 (for six test tubes up to 30 mm or six up to 17 mm) for this bath. The GH 1 apparatus holder accommodates glass flasks up to 105 mm in diameter and supports loads of up to 1 kg. Also available are the K 1 C insert basket (120 x 110 x 40 mm, up to 1 kg), the D 52 lid and the DE 52 perforated lid for an insert beaker.Typical applicationsCleaning small parts of various shapes and sizes in laboratories, medical practices and workshopsUltrasonic treatment of samples in test tubes using the appropriate holderRapid degassing of liquidsHomogenisation and emulsificationSample preparation for analysisCleaning of instruments; the ultrasonic bath is classified as a Class I medical device, the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsHow many test tubes can be sonicated at the same time?With the RG 2 holder, six tubes up to 25 mm in diameter or eight up to 16 mm; with the RG 2.2, six tubes up to 30 mm or six up to 17 mm. The holders are not included in the scope of delivery.What is the difference between the DT 52 and the DT 52 H?Both have the same tank and the same ultrasonic power. The DT 52 H also has a heating element with an adjustable range of 20 to 80 °C.Does the DT 52 have a drain?No, there is no drain.Are there different plug types available?Yes, Bandelin offers GB, CH and US versions under their own order numbers, such as 3205-GB. The 3205 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity1.8 l / 1.2 lInternal dimensions of tank (L x W x D)150 x 140 x 100 mmExternal dimensions (L x W x H)175 x 165 x 225 mm (excluding handles and ball valve, including feet)Weight (net / gross)2.4 kg / 3.0 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 240 W, rated power 60 W, 1 vibration systemTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drainHandlesNoneMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.3 A / 115 V 0.6 ALeakage currentless than 3.5 mAProtection ratingIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions275 x 265 x 295 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 52 ultrasonic bathMains cable (2 m, permanently attached to the unit)The scope of delivery does not include holders, baskets, lids and insert beakers, and they are available separately.Individual requirements and procurement serviceIf you require test tube holders, instrument holders, lids or a different model, please contact us for a bespoke procurement solution. You can request a quote for suitable accessories or a larger bath, such as the DT 255, through our procurement service, with no obligation.

The bath temperature of the Bandelin SONOREX DIGITEC DT 52 H can be set between 20 and 80 °C. A 140-watt heating element maintains the temperature of the stainless steel tank, which has internal dimensions of 150 x 140 x 100 mm and a total capacity of 1.8 l; the display shows the setpoint and actual bath temperature.Heater and safety featuresTwo safety features are built in: protection against delayed boiling and dry-run protection for the heating element. In addition, the unit switches off automatically twelve hours after the last button press. If a fixed temperature is sufficient, the DT 31 H with 65 °C is also adequate, although its tank is smaller at 0.9 l.Ultrasonic unitA vibration system generates a peak power of 240 watts at 35 kHz (rated power 60 watts). SweepTec operates fully automatically to prevent standing waves from forming in the sound field; it also features a pulse function and DEGAS rapid degassing. Degassing is activated at the start of the cleaning process. The unheated sister model, the DT 52, has the same ultrasonic specifications.OperationThe buttons can be wiped clean. The cleaning duration can be set to 1, 2, 3, 4, 5, 10, 15 or 30 minutes (tolerance ± 5 %); continuous operation is also possible. The current consumption is 0.9 A at 230 V; the mains cable is 2 m long and is permanently attached.Housing and dimensionsThe appliance weighs 2.5 kg and measures 175 x 165 x 225 mm. The tank (0.8 mm) and housing are made of 1.4301 stainless steel; there are no handles or drain. The working capacity of 1.2 l can be read from the fill level mark; the protection rating is IP 33.AccessoriesTest tube holders RG 2 and RG 2.2, the GH 1 apparatus holder for glass flasks up to 105 mm, the K 1 C insert basket, lid D 52 and the perforated lid DE 52 are designed for use with the DT 52 H bath. 0.6-litre insert beakers are available in glass, plastic and stainless steel.Typical applicationsCleaning of small parts in laboratories, medical practices and workshops at a set bath temperature between 20 and 80 °CRapid degassing of liquidsHomogenisation and emulsificationSonochemical applicationsSample preparation for analysisCleaning of instruments using a Class I medical device; the suitability of the instruments depends on the instrument manufacturer’s specificationsFrequently asked questionsWhat temperatures can be set?20 to 80 °C; the heating power is 140 watts.What safety features are there?There is protection against delayed boiling, dry-run protection for the heating element and automatic switch-off after twelve hours without any button presses.Does the unit have a drain?No.Are there other plug types available?Bandelin offers UK, Swiss and US versions under their own order numbers, such as 3225-GB. The 3225 model is available with a CEE 7/7 EU plug for 230 V.Technical detailsTotal capacity / Working capacity1.8 l / 1.2 lInternal dimensions of tank (L x W x D)150 x 140 x 100 mmExternal dimensions (L x W x H)175 x 165 x 225 mm (excluding handles and ball valve, including feet)Weight (net / gross)2.5 kg / 3.1 kgUltrasonic frequency35 kHzUltrasonic powerPeak power 240 W, rated power 60 W, 1 vibration systemHeating140 W, adjustable temperature range 20 to 80 °C, protection against delayed boiling, dry-run protectionTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %) or continuous operationOperationButtons, displayFunctionsSweepTec, pulse function, DEGAS rapid degassing, protection against delayed boiling, dry-run protection for the heater, automatic safety shut-off 12 hours after the last button pressTank materialStainless steel 1.4301, thickness 0.8 mmHousing materialStainless steel 1.4301DrainNo drainHandlesNoneMains connection230 V~ (± 10 %), 50/60 Hz, alternatively 115 V~ (± 10 %), 2 m fixed mains lead, protection class ICurrent consumption230 V 0.9 A / 115 V 1.8 ALeakage currentless than 3.5 mADegree of protectionIP 33Permissible ambient temperature5 to 40 °CMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUPackaging dimensions275 x 265 x 295 mmScope of delivery1x Bandelin SONOREX DIGITEC DT 52 H ultrasonic bath with heaterMains lead (2 m, permanently attached to the unit)The scope of delivery does not include holders, baskets, lids and insert beakers, and they are available separately.Individual requirements and procurement serviceFor test tube holders, apparatus holders, lids or a larger heated model, individual procurement is required. You can request a quote via our procurement service.