Giese-GEF
Class 2.1 dangerous goods label (flammable gases), 100 x 100 mm, film, roll of 1,000 labels.
Regulatory labelling for flammable gases Ensure your gas shipments are labelled professionally. This Class 2.1 dangerous goods label is specifically designed for the labelling of flammable gases (such as propane, butane, acetylene or hydrogen). Featuring the internationally standardised flame symbol on a red background, it reliably meets all legal requirements in accordance with ADR, RID, ADN, the IMDG Code and IATA DGR for road, rail, sea and air transport. Durability for everyday hazardous goods transport Safety allows for no compromises on quality. Our labels are made from a durable PE/PVC film, specially developed for the harsh realities of day-to-day logistics. They are weather-resistant, waterproof and UV-stable. The strong permanent adhesive ensures that the label adheres securely even to curved surfaces such as gas cylinders, drums or tank containers – even in damp or cold conditions. Efficiency in use They are supplied on a handy roll of 1,000 labels, ideal for high-volume use in filling plants or dispatch centres. The standard size of 100 x 100 mm complies with the prescribed minimum size for parcels. Thanks to their clean finish, the labels can be quickly peeled off the backing and applied efficiently. Technical details Dangerous goods class: 2.1 (Flammable gases) Symbol: Flame (black or white) on a red background, the number ‘2’ in the bottom corner Dimensions: 100 x 100 mm (standard size for packages) Material: Weather-resistant plastic film (PE/PVC) Adhesive: Permanent (self-adhesive) Compliance: ADR, RID, ADN, IMDG, IATA Properties: Seawater-resistant, abrasion-resistant, UV-stable Packaging: Roll of 1,000 labels Contents 1x roll of Class 2.1 dangerous goods labels (contents: 1,000 labels) Note: This label applies to flammable gases. For non-flammable, non-toxic gases, you will need Class 2.2 (green). Custom requirements & procurement service Do you require labels for other gas classes (2.2, 2.3) or are you looking for placards in the 250x250 mm format for containers? We can source the appropriate safety labelling for every application. Make use of our procurement service.
Class 1.2 dangerous goods label (explosive substances/projectiles), 100 x 100 mm, film, roll of 1,000 labels.
Warning: Projectiles: Labelling for Class 1.2 This Class 1.2 label is mandatory for explosive substances and articles which, whilst not capable of mass explosion, pose a hazard from flying fragments (shrapnel, projectiles). The orange warning label featuring the ‘exploding bomb’ symbol immediately alerts emergency services and logistics personnel to the specific nature of the threat. Fulfil your duty of care in accordance with ADR, RID, ADN, IMDG and IATA DGR safely and reliably. Extremely durable for international transport Explosives are subject to the strictest transport regulations. Our labels guarantee that your labelling remains intact even under the most adverse conditions. The high-quality PE/PVC film is completely seawater-resistant, weatherproof and UV-stable. The permanent adhesive adheres securely to all standard packaging materials such as wooden crates, metal drums or cardboard boxes – essential for complex supply chains in the military or industrial sectors. Standardised format for efficient handling With standard dimensions of 100 x 100 mm, these labels meet the requirements for consignments. Supplied on a large roll containing 1,000 labels, they are ideal for professional use in ammunition depots, by fireworks manufacturers or in the chemical industry. The ease with which they can be peeled off the backing ensures rapid labelling processes. Technical details Dangerous goods class: 1, subclass 1.2 (explosive substances, danger from projectiles) Symbol: Exploding bomb (black) on an orange background Dimensions: 100 x 100 mm (standard size) Material: Weather-resistant plastic film (PE/PVC) Adhesive: Permanent (self-adhesive) Resistance: Seawater-resistant, UV-stable, abrasion-resistant Compliance: ADR, RID, IMDG, IATA Packaging: Roll of 1,000 labels Contents 1x roll of Class 1.2 dangerous goods labels (contents: 1,000 labels) Note: The compatibility group (letters A–L, N, S) may need to be supplemented in accordance with your specific substance data, unless otherwise specified. Customised requirements & procurement service Do you require labels for other subclasses of Class 1 (e.g. 1.1 mass explosion, 1.4 minor hazard) or special placards for containers? We can assist you with the correct labelling of your explosive goods. Make use of our procurement service.
Class 3 hazardous goods label (flammable liquids), 100 x 100 mm, film, roll of 1,000 labels
These Class 3 dangerous goods labels (symbol: flame) are essential for the correct labelling of flammable liquids. They ensure compliance with international transport and storage regulations (such as ADR, RID, IMDG, GHS) and are a must for anyone who ships or stores such substances (e.g. solvents, alcohols, fuels, paints). Compliance and safety The pictogram (flame, white) and the number ‘3’ (class) on a red background clearly warn carriers and users of the hazard. The use of these labels is required by law and prevents accidents, incorrect storage and severe penalties during inspections. Weather-resistant material for transport and storage These labels are made from a robust, permanently adhesive film (PE/PVC). This material is weatherproof, UV-stable, abrasion-resistant and seawater-resistant. It is therefore the mandatory choice for outdoor use and the labelling of drums, IBCs and containers (ADR/IMDG). Easy to use The labels, in the standard size of 100 x 100 mm, are supplied on a roll (1,000 pieces per roll). This allows for quick and easy application, either manually or using a label dispenser. Technical details Hazard class: 3 (Flammable liquids) Pictogram: Flame (white on red) Dimensions: 100 x 100 mm Packaging: Roll Labels per roll: 1,000 Material: Film (PE/PVC), permanent adhesive, seawater-resistant, UV-resistant Compliance: ADR, RID, IMDG, GHS Contents 1 roll of Class 3 dangerous goods labels (1,000 labels per roll) made from film. Customised requirements & procurement service Do you require other classes of dangerous goods (e.g. Class 8, Corrosive; Class 6.1, Toxic), different formats or GHS pictograms not listed here? Our team of experts will be happy to advise you. For all your compliance labelling requirements, please use our bespoke procurement service.
Class 9 dangerous goods label (Miscellaneous dangerous substances), 100 x 100 mm, film, roll of 1,000 labels.
Essential labelling for Class 9 consignments These Class 9 dangerous goods labels (symbol: 7 vertical stripes) are essential for the correct labelling of ‘various dangerous substances and articles’. They ensure compliance with international transport and storage regulations (such as ADR, RID, IMDG and IATA) and are a must for anyone shipping such substances (e.g. asbestos, dry ice, environmentally hazardous substances or certain lithium batteries in equipment). Compliance and safety The distinctive pictogram (black stripes at the top) on a white background clearly warns carriers and users of hazards that cannot be classified under any other category. The use of these labels is required by law and prevents accidents, incorrect storage and severe penalties during inspections. Weather-resistant material for transport and storage These labels are made from a robust, permanently adhesive film (PE/PVC). This material is weatherproof, UV-stable, abrasion-resistant and seawater-resistant. It is therefore the mandatory choice for outdoor use and for labelling drums, IBCs and containers (ADR/IMDG), where paper labels would fail. Easy to use The labels, in the standard size of 100 x 100 mm, are supplied on a roll (1,000 per roll). This allows for quick and easy application, either manually or using a label dispenser, making them ideal for high-volume dispatch. Technical details Hazard class: 9 (Miscellaneous dangerous substances and articles) Pictogram: 7 vertical stripes (black on white) Dimensions: 100 x 100 mm (standard for consignments) Packaging: Roll Labels per roll: 1,000 Material: Film (PE/PVC), permanent adhesive, seawater-resistant, UV-resistant Compliance: ADR, RID, ADN, IMDG, IATA Contents 1 roll of Class 9 dangerous goods labels (1,000 labels per roll) made of film. Important note: For consignments consisting solely of lithium batteries, please check whether the special Class 9A marking is required. Custom requirements & procurement service Do you require other dangerous goods classes (e.g. Class 8, Corrosive; Class 3, Flammable), different formats or labels with a pre-printed UN number? Our team of experts will be happy to advise you. For all your compliance labelling requirements, please use our bespoke procurement service. Enquire here.
Class 2.2 dangerous goods label (non-flammable gases), 100 x 100 mm, film, roll of 1,000 labels.
Clear labelling for non-flammable gases Ensure maximum safety and compliance when transporting pressurised gas cylinders. This Class 2.2 dangerous goods label clearly and visibly identifies ‘non-flammable, non-toxic gases’ (such as nitrogen, argon, helium, carbon dioxide or compressed air). The white or black gas cylinder symbol on a green background immediately signals the specific hazard posed by pressure, whilst clearly distinguishing it from flammable (red) or toxic (white) gases. Weather- and chemical-resistant Hazardous goods labelling must remain legible under all circumstances. Our labels are made from a high-quality PE/PVC film, specifically designed for harsh outdoor use. They are resistant to UV radiation, moisture, seawater and many chemicals. The permanent adhesive guarantees rock-solid adhesion to curved surfaces such as steel cylinders, cryogenic containers or tankers – without peeling at the edges. Optimised for logistics and shipping Measuring 100 x 100 mm, the labels comply with the prescribed minimum dimensions for consignments in accordance with ADR, RID, IMDG and IATA. Supplied on a roll of 1,000 pieces, they can be applied quickly and efficiently – whether by hand or using dispensers. This helps you avoid transport delays caused by incorrect labelling and ensures you meet all legal requirements. Technical details Dangerous goods class: 2.2 (Non-flammable, non-toxic gases) Symbol: Gas cylinder (black or white) on a green background, number ‘2’ Dimensions: 100 x 100 mm (standard size for consignments) Material: Durable plastic film (PE/PVC) Adhesive: Permanent (self-adhesive) Properties: Weather-resistant, waterproof, abrasion-resistant Compliance: ADR, RID, ADN, IMDG, IATA Packaging: Roll of 1,000 labels Contents 1x roll of Class 2.2 dangerous goods labels (contents: 1,000 labels) Note: This label is specifically for non-flammable gases. For flammable gases, use Class 2.1 (red); for toxic gases, use Class 2.3 (white). Customised requirements & procurement service Do you require combination labels, placards for containers (250x250 mm) or labels for Class 2.3 (toxic gases)? We can equip your logistics operations with the full range of regulation-compliant labelling. Make use of our procurement service.
Class 1.4 dangerous goods label (low risk of explosion), 100 x 100 mm, film, roll of 1,000 labels.
Correct labelling for Class 1.4 (safety ammunition, etc.) Substances and articles of Subclass 1.4 pose only a minor risk of explosion in the event of ignition or detonation during carriage. The effects are largely confined to the consignment, and no significant projectiles are to be expected. Typical examples include safety ammunition, pyrotechnic articles for technical purposes and certain signalling devices. Label these goods in accordance with regulations using the characteristic label (the number ‘1.4’ at the top, the number ‘1’ at the bottom) to avoid delays in dispatch. Suitability for global trade Our dangerous goods labels are specifically designed to meet the demands of complex supply chains. Manufactured from robust PE/PVC film, they are seawater-resistant in accordance with BS 5609, weather-resistant and UV-stable. The permanent special adhesive ensures secure adhesion to a wide variety of surfaces such as cardboard boxes, metal crates or plastic containers – even in the presence of moisture and temperature fluctuations. Efficient handling during dispatch The labels, in the prescribed minimum size of 100 x 100 mm, are supplied on a handy roll of 1,000 labels. This enables rapid labelling, both manually and using label dispensers. The clean die-cut ensures easy separation from the backing paper without tearing. Technical details Dangerous goods class: 1, subclass 1.4 (low risk of explosion) Symbols: Number ‘1.4’ (black) in the upper half, number ‘1’ at the bottom (not a bomb!) Background colour: Orange Dimensions: 100 x 100 mm (ADR-compliant) Material: Weather-resistant plastic film (PE/PVC) Adhesive: Permanent (self-adhesive) Resistance: Seawater-resistant, UV-stable Compliance: ADR, RID, ADN, IMDG, IATA Packaging: Roll of 1,000 labels Contents 1x roll of Class 1.4 dangerous goods labels (contents: 1,000 labels) Note: Depending on the substance, it may be necessary to specify the compatibility group (e.g. S or G) alongside the label. Customised requirements & procurement service Do you require labels with the compatibility group already printed on them (e.g. 1.4S for air transport) or labels for other hazard classes? We manufacture and source your bespoke safety labelling. Make use of our procurement service.