Bürkle Novartos Uno Pharmaceutical Zone Collector, 2-compartment, V4A stainless steel, 600 mm insertion depth, 5358-0600
€1,218.00
- Target-point sampling with a two-stage sampling line from a collection chamber
- Two identical sub-samples from a single puncture
- V4A stainless steel (1.4404) with components made from 1.4571, pipe diameter 25 mm
- Three lengths from 600 to 1,400 mm penetration depth
- Sample inserts from 0 to 4 ml and replacement tips available separately
Product information "Bürkle Novartos Uno Pharmaceutical Zone Collector, 2-compartment, V4A stainless steel, 600 mm insertion depth, 5358-0600"
In pharmaceutical incoming goods inspection, a single sample per container is often insufficient. An inspector requires two identical sub-samples from the same location in the drum: one for the current release test, and one as a retained sample for subsequent re-testing. Two separate punctures would be inaccurate for this purpose, as they would never hit exactly the same spot. The Novartos Uno, with its dual-sample extraction system, extracts precisely this double sample from a single, pre-determined point in the bulk material, in a single puncture.
Two samples from a single point, one puncture
The sampling lance has a single collection chamber, which is fitted with two sample inserts (available separately). When inserted into the bulk material, both inserts fill simultaneously at the same point. The material between the two sub-samples thus remains comparable, without the need for a second penetration, which would mix the rest of the container more thoroughly or cause damage. After the lance has been withdrawn, the two filled inserts are removed and processed separately.
Use in release and hold procedures
Typically, the sample is divided into one for the ongoing test and one for retention in accordance with standard GMP guidelines. Both sub-samples originate from the same zone, which makes the comparison traceable at a later stage, for example if a re-test is required due to a complaint. In the event of a dispute, this makes it possible to prove that the retained sample really does originate from the same area of the container as the one originally tested.
Three lengths for different container heights
The Novartos Uno 2-Fach is available with penetration depths of 600, 1,000 and 1,400 millimetres; depending on the model, the total length is 800, 1,200 or 1,600 millimetres. For a standard drum, the shortest version is usually sufficient; larger big bags or containers require the longer variants to ensure that even the deepest layers can be reached. For all three lengths, the target position of the collection chamber is 52 millimetres in front of the lance tip, meaning that the extraction depth can be controlled via the selected overall length.
Material for the pharmaceutical sector
The lance is manufactured from V4A (1.4404) stainless steel with components made from 1.4571, with a tube diameter of 25 millimetres. Both steels are corrosion-resistant and designed for repeated cleaning between batches, as is standard practice in pharmaceutical and chemical production.
Why the chamber position matters
The collection chamber begins 52 millimetres behind the tip of the lance. The top 52 millimetres of the container are therefore not sampled, which must be taken into account when comparing samples from other samplers or from previous batches. The chamber length of 45 millimetres also determines the layer height from which the two subsamples are taken.
Replacement tip and sampling inserts
For the Novartos Uno series, a replacement tip made of V4A is available as a separate spare part in case the original tip becomes damaged through frequent use. The appropriate sample inserts are available in six volumes ranging from 0 to 4 millilitres and are selected individually depending on the test task and inserted into the collection chamber.
Selection within the Novartos range
The Novartos Uno draws the sample at exactly one point, whereas the Novartos Multi with a 2-channel sample draw system draws the sample across four to nine zones along the entire penetration depth, providing an overview of multiple layers rather than a single point. If a third sub-sample is required from the same location, for example, for additional validation, the Novartos Uno with 3-zone sampling is available. The multi-zone variant, with three samples per zone, is the Novartos Multi with 3-zone sampling.
Typical applications
- Incoming goods inspection of powders and granules in pharmaceutical and chemical production
- Duplicate samples for release testing and retained samples from a drum or big bag
- Sampling at a defined target point without the need for multiple punctures
- Batch testing of free-flowing bulk materials
Technical details
| Pipe diameter | 25 mm |
| Material | V4A stainless steel (1.4404) with components made from 1.4571 |
| Chamber length | 45 mm |
| Chamber width | 13 mm |
| Start of the collection chamber | 52 mm |
| Configuration | 2 sample inserts |
| Number of collection ports | 1 |
| Storage | Room temperature |
Variants at a glance
| Item number | Insertion depth mm | Overall length mm |
| 5358-0600 | 600 | 800 |
| 5358-1001 | 1,000 | 1,200 |
| 5358-1400 | 1,400 | 1,600 |
Scope of delivery
- Novartos Uno collection lance, 2-channel sample line, in the selected length
- excluding sample inserts (available separately)
Service and procurement
The correct length depends on the insertion depth of the respective container. We supply the Novartos Uno 2-channel in all three lengths and can source matching sample inserts ranging from 0 to 4 millilitres, as well as the replacement tip made from V4A. If you have any queries regarding the selection of the correct zone sampler variant within the Novartos range, our team will be happy to assist.