ESAB OK GoldRox Welding Rod, Rutile-cellulose, E 42 0 RC 11, Ø 3.2 x 350 mm, 1 kg, 46593235Z0
€6.45
No longer available
- Rutile cellulose rod electrode, Ø 3.2 mm, length 350 mm
- Current range 90 to 140 A, voltage 24 V
- 1 kg per pack
- E 42 0 RC 11 according to EN ISO 2560-A, E6013 according to AWS A5.1
- Direct current and alternating current, all positions including PG and PE
- Deposition rate 1.1 kg/h
- Used in metal fabrication, light steel construction, tank and shipbuilding
ⓘ This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.
Product information "ESAB OK GoldRox Welding Rod, Rutile-cellulose, E 42 0 RC 11, Ø 3.2 x 350 mm, 1 kg, 46593235Z0"
90 to 140 A at 24 V and a deposition rate of 1.1 kg/h: these are the key specifications of the OK GoldRox with a diameter of 3.2 mm. The electrode is 350 mm long and the pack weighs 1 kg. It is the version designed for higher currents, alongside the 2.5 mm electrode (60 to 90 A). Both have a yellow coating with an ignition aid.
Welding data
At 90 % of the maximum current, each electrode takes 57 s to melt off. The deposition efficiency is 59 %; 59 electrodes are consumed to produce 1 kg of weld metal. The welding current is DC+- or AC. ESAB recommends direct current at the negative terminal; the positive terminal is also suitable. For alternating current, the transformer must have a no-load voltage of at least 50 V.
Classification and weld metal
EN ISO 2560-A classifies the electrode as E 42 0 RC 11; SFA/AWS A5.1 classifies it as E6013, carbon-manganese alloy type. The tensile strength of the weld metal is 520 MPa, and the notched impact energy is 60 J at 0 °C. Welding can be carried out in all positions, including vertical down (PG) and overhead (PE).
Difference compared to the 2.5 mm electrode
With the larger diameter, the current range and deposition rate increase, whilst the deposition efficiency decreases slightly.
| Ø 2.5 mm | Ø 3.2 mm (this electrode) | |
| Current range | 60 to 90 A | 90 to 140 A |
| Voltage | 25 V | 24 V |
| Deposition rate | 0.8 kg/h | 1.1 kg/h |
| Deposition efficiency | 62 % | 59 % |
| Electrodes per kg of weld metal | 91 | 59 |
| Melt-off time at 90 % Imax | 49 s | 57 s |
Typical applications
GoldRox is described as a tack and assembly electrode for metal construction, light steel construction, tank construction and shipbuilding. It is not affected by primers or scale; the slag is easy to remove and spatter formation is minimal.
Approvals
Depending on the manufacturing site: ABS 2, BV 2, CE EN 13479, DB 10.039.48, LR 2, UKCA EN 13479 and VdTÜV 19622.
Technical details
| Diameter | 3.2 mm |
| Electrode length | 350 mm |
| Pack size | 1 kg |
| Current range | 90 to 140 A |
| Voltage | 24 V |
| Deposition rate | 1.1 kg/h |
| Melt-off time per electrode at 90 % of Imax | 57 s |
| Deposition efficiency | 59 % |
| Electrodes per kg of weld metal | 59 |
| Electrode type | Rutile-cellulose-coated, yellow coating, with ignition aid |
| Classification | EN ISO 2560-A: E 42 0 RC 11; SFA/AWS A5.1: E6013 |
| Alloy type | Carbon-manganese |
| Welding current | DC+-, AC |
| Welding positions | all, including PG and PE |
| Tensile strength (ISO) | 520 MPa |
| Notched impact energy (ISO) | 60 J at 0 °C |
Scope of delivery
- 1 kg of OK GoldRox rod electrodes, Ø 3.2 x 350 mm
Individual requirements and procurement service
For inverter-based manual metal arc welding with electrodes up to 4.0 mm in diameter, we offer the ESAB Rogue ES 200i PRO, which has a current range of up to 200 A. For other electrodes or larger quantities, please use our procurement service.