Skip to main content Skip to search Skip to main navigation

IKA S 50 KG - HH - G 45 F Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008004100

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "IKA S 50 KG - HH - G 45 F Dispersing Tool, Ø 45 mm, Suitable for Vacuum Use, 0008004100"

The S 50 KG - HH - G 45 F (0008004100) handles 0.25 to 10 l with a 45 mm stator and a 40 mm rotor. The shaft is mounted on ball bearings; the single-acting mechanical seal consists of carbide against carbide. The T 50 digital serves as the drive.

Vacuum, pressure and media

With the mechanical seal, the unit is designed for vacuum down to 1 mbar and pressure up to 6 bar. Materials in contact with the product are FFPM, tungsten carbide (WC) and AISI 316L. IKA describes it as solvent-resistant. The maximum operating temperature is 150 °C; sterilisation is carried out using wet chemical methods.

Dimensions and final fineness

The immersion depth ranges from 70 to 250 mm, whilst the installation length is 290 mm. At a maximum peripheral speed of 20.9 m/s, the tool achieves final finenesses of 10 to 30 µm for suspensions and 1 to 10 µm for emulsions. It weighs 0.51 kg. At 40 mm, the rotor is larger than that of the S 50 KG - HH - G 45 G (36 mm), and the peripheral speed is correspondingly higher than its 18.8 m/s.

The same dimensions without a mechanical seal

With the same operating range and final particle size, but with PTFE bearings instead of a mechanical seal, the S 50 N - G 45 F is available. The immersion depth (70 to 250 mm) and installation length (290 mm) are the same as for this tool. Those working under vacuum should stick with the KG version.

Larger batches

The S 50 KG - HH - G 45 G, with a 36 mm rotor and a final fineness of 40 to 100 µm (suspensions), processes volumes of up to 20 l. The S 50 KG - HH - G 45 M covers volumes from 0.5 to 15 l and specifies 25 to 50 µm for suspensions and 5 to 20 µm for emulsions.

Typical applications

  • Dispersing and emulsifying in batches of 0.25 to 10 l
  • Operations under vacuum down to 1 mbar
  • Processes at pressures up to 6 bar
  • Batches containing solvents
  • Samples where the tool is sterilised using wet chemical methods

Technical details

Working range (H2O)0.25 to 10 l
Stator diameter45 mm
Rotor diameter40 mm
Maximum circumferential speed20.9 m/s
Immersion depth70 to 250 mm
Installation length290 mm
Bearing and sealBall bearing, single-acting mechanical seal (carbide/carbide)
Materials in contact with the productFFPM, WC / AISI 316L
Suitable for solventsYes
Max. operating temperature150 °C
Sterilisabilitywet chemical
Vacuum1 mbar
Max. pressure6 bar
Final fineness of suspensions10 to 30 µm
Final fineness of emulsions1 to 10 µm
Weight0.51 kg

Scope of delivery

  • 1 x IKA S 50 KG - HH - G 45 F dispersing tool (single tool)
  • The T 50 digital drive is not included in the scope of delivery.

Individual requirements and procurement service

We can supply the T 50 digital drive and a second tool for changing on request. The procurement service will assist with selecting the correct geometry.

Skip product gallery

Fits

Discount
IKA T 50 digital ULTRA-TURRAX Dispergierer, 0,25 bis 30 l, bis 10.000 rpm
IKA T 50 digital ULTRA-TURRAX disperser, 0.25 to 30 l, up to 10,000 rpm, 0003787000
Manufacturer number: 0003787000

If a process in a beaker reaches its limits because 2 litres suddenly need to become 20, a drive with more power and a larger support arm is required, but without having to switch to a completely different system. The T 50 digital ULTRA-TURRAX covers precisely this transition, from 0.25 to 30 litres (H₂O), with a speed range of 600 to 10,000 revolutions per minute. As with the smaller model, this is a drive unit only, without a dispersing tool.Constant speed even with varying viscosityThe electronic speed control maintains the set value even if the viscosity changes during the batch, with a maximum permissible viscosity of 5,000 mPas. A soft start reduces the start-up load, whilst electronic overload protection and an error code display ensure reliable operation. Without a tool fitted, the noise level is 72 dB(A); the speed itself is displayed via an LED and can be adjusted continuously.Powerful drive for larger volumesWith a power input of 1,100 watts and an output of 700 watts, the T 50 digital significantly outperforms the smaller T 25 digital; the support arm measures 16 millimetres in diameter and 220 millimetres in length. Measuring 115 x 355 x 139 millimetres and weighing 5.85 kilograms, the machine can still be guided by hand. It operates on 220 to 240 volts at 50 or 60 hertz; a voltage variant of 100 to 120 volts is also available. It has an IP 20 protection rating in accordance with DIN EN 60529, and is suitable for ambient temperatures of 5 to 40 °C with up to 80 % relative humidity.Tool change using the supplied wrenchesA socket wrench for changing the shaft and another for changing the dispersing tool are supplied with the drive unit; the dispersing tool itself is not included and must be selected to suit the application. The range includes, amongst others, the stainless steel tools S 50 N - G 45 G (Ident 0008003000) and S 50 N - G 45 F (ID 0008003900); the R 1405 propeller (ID 0001289800) for axial flow; and the R 1402 dissolver (ID 0001243300) for radial flow. The S 50 N - W 80 SMK jet mixing head (ID 0008006300) is also suitable for dispersion tasks requiring high shear. For stationary operation, the H-stand R 2722 (ID 0001412000) with boss head R 271 (ID 0002664000) is available.Typical applicationsScale-up of laboratory formulations to pilot plant volumesHomogenisation of suspensions and emulsions up to 30 litresPilot trials prior to scaling up to production scaleInterchangeable rotor-stator assemblies depending on the applicationSelection guide: smaller, larger or as a complete setThose working at a laboratory scale of up to 2 litres are better served by the more compact T 25 digital ULTRA-TURRAX drive unit or the T 25 digital Solution complete set; for even smaller batches, the T 18 brushless digital is suitable. If requirements exceed 30 litres, or if a three-phase connection is available anyway, the T 65 digital ULTRA-TURRAX can handle volumes of up to 50 litres.Technical detailsMotor power input / output1,100 W / 700 WProcessable volume (H₂O)0.25 to 30 lMax. viscosity5,000 mPasSpeed range600 to 10,000 rpm, continuously variable (1 % deviation)Speed displayLEDNoise level (without tools)72 dB(A)Support arm diameter / support arm length16 mm / 220 mmProcess typebatchPermissible duty cycle100 %Permissible ambient temperature range / humidity5 to 40 °C / 80 % (up to 31 °C), decreasing linearly to 50 % at 40 °CIP ratingIP 20 in accordance with DIN EN 60529Connected load220 to 240 V, 50/60 Hz, 1,100 W (additional voltage variant 100 to 120 V available)Dimensions (W x H x D)115 x 355 x 139 mmWeight5.85 kgScope of deliveryT 50 digital ULTRA-TURRAX drive unitSocket wrench for changing the shaftSocket wrench for tool changeA dispersing tool is not included and must be selected separately to suit the specific application.Regulatory informationThis unit is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, IKA, is DE 66784213. Information on the return of old appliances can be found on our Environment and Disposal page.Warranty and procurement serviceThe IKA manufacturer’s warranty applies to the T 50 digital: 2 years, extended to 3 years upon registration at ika.com/register within 90 days of purchase. Our procurement service assembles dispersing tools, stirring elements and stands to suit the existing drive; on request, it also provides factory calibration certificates and qualification documents for regulated areas.

Sale price: €3,181.50 Manufacturer's RRP: €4,242.00 25% below manufacturer's RRP