Meditrade Nitrile 3000 Examination Gloves, White, Powder-free, 100 Pieces (sizes S to XL), 1280X

You don’t always need specialist equipment for your daily use of nitrile gloves. Meditrade Nitrile 3000 examination gloves are the standard white nitrile gloves in the Meditrade range available from LT Laborhandel; they are powder-free, latex-free and come with fully documented packaging and pallet dimensions for logistics planning. Available in sizes S to XL, each in packs of 100.

Latex-free with a tried-and-tested basic formulation

The glove is made from nitrile butadiene rubber (NBR) containing the following ingredients: antioxidant, sulphur, zinc oxide, zinc diethyldithiocarbamate, zinc dibutyl dithiocarbamate, titanium dioxide and potassium hydroxide; it is free from mercaptobenzothiazole and thiurams and, according to the manufacturer, is not manufactured using natural rubber latex. The textured surface with a rolled cuff ensures a secure fit and makes the gloves easier to put on and take off.

Thickness from the cuff to the fingertips

According to the data sheet, the thickness at the shaft is 0.05 mm (± 0.02 mm), at the palm 0.07 mm (± 0.02 mm) and at the fingertip 0.10 mm (± 0.02 mm), ensuring that the greatest mechanical stress is absorbed at the fingertips. The tear strength is at least 6 N both before and after artificial ageing, tested with an AQL value of 1.5.

White as a neutral base colour

Unlike the coloured variants of the Meditrade nitrile range, Nitrile 3000 is available in a neutral white colour, which is regarded as the standard colour for examination gloves in many organisations and is compatible with almost any corporate design or hygiene concept. For organisations with no specific need for colour-coding or additional testing, it is therefore often the obvious first choice before a more specialised variant, such as a contrasting colour or an additionally tested version, is considered.

Class I medical device and Category III PPE

The Nitril 3000 is classified as a Class I medical device in accordance with Regulation (EU) 2017/745 and as Category III personal protective equipment in accordance with Regulation (EU) 2016/425. It complies with EN 455 (Parts 1 to 4), EN 374-1, -2, -4 and -5, EN 16523-1 for chemical permeation, EN 420:2003+A1:2009 and EN 21420:2020, and is manufactured under a quality management system certified to EN ISO 13485:2016. According to the data sheet, it is also suitable for contact with food.

Selection guide: choosing the right size

At LT Laborhandel, the Nitril 3000 is available in sizes S to XL, with widths ranging from 80 mm (± 10 mm) for size S to over 110 mm for size XL.

Distinctions within the nitrile range

Within the Meditrade nitrile range at LT Laborhandel, the Nitril 3000 is the standard white version with fully documented packaging and pallet dimensions. Anyone looking for the same glove in a dark contrasting colour for tattooing, cosmetic or laboratory work involving light-coloured powders will find the Meditrade Nitrile Black, which offers the same range of thicknesses. For businesses using colour-coding, the Meditrade Nitrile Viola in purple is also available. If you require a variant that has been additionally tested against blood-borne pathogens and is available in sizes up to XXL, look for the Meditrade Nitril NextGen.

Use, storage, shelf life and disposal

According to the data sheet, the shelf life is 3 or 5 years, provided the gloves are stored in a cool, dry place and protected from direct sunlight. The gloves are non-sterile, ambidextrous and intended for single use. According to the information in the data sheet, they contain dithiocarbamates, which should not be used by anyone with a known hypersensitivity to these substances. After use, the gloves are disposed of as clinical waste or via the internal hazardous waste disposal system, depending on the degree of contamination.

Typical applications

As the basic variant of the nitrile range, the Nitril 3000 is suitable for a wide range of applications:

• General examination and routine tasks in medical practices, laboratories and care settings
• Food processing and catering, for which the glove is suitable according to the data sheet
• Businesses that require a light-coloured, neutral glove without the need for additional testing
• Logistics-intensive businesses that can plan precisely thanks to documented carton and pallet dimensions

For example, during incoming goods inspection in food processing, the same type of glove can be used consistently, from sampling right through to packaging checks. A neutral, widely used basic variant is also practical in training and educational contexts, as it is not tied to a specific workstation or colour-coding scheme.

Assessing requirements correctly: from the pack to the box

The Nitril 3000 is sold in packs of 100 pieces per size. According to the manufacturer, one carton holds 10 packs, i.e. 1,000 gloves, with a pallet containing 72 cartons (carton dimensions 29.5 x 26.0 x 25.0 cm). A simple rough calculation helps with demand planning: at a consumption rate of 10 gloves per workstation per day, one pack covers around two working weeks; at 30 gloves per day, it lasts for three to four working days. For larger businesses with multiple workstations, the carton dimensions can also be used to plan storage logistics directly, for example, how many cartons will fit on a pallet or on a warehouse shelf. This makes capacity planning easier, particularly for larger businesses with their own warehousing, without having to first request the dimensions separately from the manufacturer.

Why a basic version can be a sensible choice

Not every business requires the additional ASTM F-1671 testing offered by NextGen or colour-coding by workstation. Where the nitrile glove is primarily intended to provide reliable basic protection in accordance with EN 455 and EN 374, with traceable logistics, the Nitrile 3000 is a cost-effective choice without compromising on tear strength, AQL value or certification compared to the other variants in the range.

Frequently asked questions about the Nitril 3000

Is the Nitrile 3000 latex-free?
Yes, according to the manufacturer, it is produced without natural rubber latex.

Is the glove sterile?
No, according to the data sheet, the Nitril 3000 is a non-sterile, single-use glove.

How thick is the glove?
According to the data sheet, 0.05 mm on the shaft, 0.07 mm on the palm and 0.10 mm at the fingertips, with a tolerance of ± 0.02 mm in each case.

How big is a carton and how many fit on a pallet?
A carton holds 1,000 gloves (10 packs of 100 each) and measures 29.5 x 26.0 x 25.0 cm; a pallet holds 72 cartons.

Are the gloves suitable for food contact?
Yes, according to the data sheet, they are suitable for contact with food.

Can I order individual gloves instead of the whole pack?
No, the pack of 100 pieces per size is the smallest unit sold.

How does the Nitril 3000 differ from the coloured variants in the range?
It shares the same material and thickness grades as Nitril Black and Nitril Viola, but is the only variant in neutral white without an additional colour-coding function.

Technical details

Scope of delivery

• 1 pack = 100 Meditrade Nitrile 3000 examination gloves (size as per variant selection)

Individual requirements and procurement service

Do you require larger purchase quantities, a different colour from the Meditrade nitrile range, or assistance with warehouse logistics? Our procurement service will be happy to help you make the right choice.