Skip to main content Skip to search Skip to main navigation

Memmert Compressor-Cooled incubator ICP110, 108 l, -12 to +60 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert Compressor-Cooled incubator ICP110, 108 l, -12 to +60 °C, TwinDISPLAY"

The Memmert Compressor-Cooled incubator ICP110 holds 108 litres and is the smallest of the four ICP sizes. It heats and cools in the setting temperature range from -12 to +60 °C with a compressor system that uses propane (R290) as refrigerant, and it is operated via the TwinDISPLAY of the ControlCOCKPIT. The external dimensions are 745 × 1,233 × 584 mm (W×H×D), and the door handle adds 56 mm. The unit stands mobile and lockable on castors.

One cooling system for cooling and heating

The cooling and heating system is CFC-free and defrosts automatically. The thermal jacket is separated from the interior, so an evaporator does not dry out the material. Temperature control is via an all-round air jacket, and the speed of the circulating air motor can be set on the display.

A restriction applies to the range below 0 °C: the unit is not suitable for permanent storage at sub-zero temperatures, and in continuous operation the glass door can ice up.

TwinDISPLAY and two Pt100 sensors

Two Pt100 sensors of DIN class A measure in 4-wire technology and monitor each other. If one fails, the other takes over its function. The adaptive digital PID microprocessor controller shows its values on two TFT colour graphic displays, and the temperature setting accuracy is 0.1 °C. Celsius or Fahrenheit, program runtime, time zones and summer/winter time are settable, and the interface is available in nine languages from German to Chinese.

The countdown clock runs from 1 minute to 99 days with target time indication. With SetpointWAIT, the process time starts only when the setpoint temperature is reached. The calibration function takes three freely selectable temperature values. Programs can be created, managed and transferred with the AtmoCONTROL software via Ethernet or USB port, and the program sequence remains saved in the event of a power failure.

Three monitoring levels for temperature

A mechanical temperature limiter TB of protection class 1 according to DIN 12880 switches the heating off at about 10 °C above the maximum chamber temperature. Selectable on the display, an adjustable temperature monitor TWW (protection class 3.3) or an adjustable temperature limiter TWB (protection class 2) is added. The third level is AutoSAFETY (ASF): the over- and under-temperature protection follows the setpoint at a freely selectable interval, triggers an alarm when exceeded or fallen below, switches the heating off when exceeded and the cooling unit off when fallen below. A self-diagnosis system supports troubleshooting, and the alarm is visual and acoustic.

When the ICP110 is enough and when another model fits better

The interior measures 560 × 480 × 400 mm (depth less 33 mm for the fan) and takes up to 5 shelves, with 20 kg allowed per shelf and 150 kg for the whole unit. If that is not enough, the ICP260 with 256 litres, up to 9 shelves, 200 kg per unit and 800 mm internal height instead of 480 mm is the next step.

Anyone who also needs to control air humidity will find the same volume of 108 litres in the ICH110 climate chamber. It actively humidifies and dehumidifies from 10 to 80 % rh, its setting temperature range begins at -10 °C, and with humidity it works from +10 to +60 °C.

Typical applications

These applications come into question for the ICP110:

  • Incubating, culturing and cooling in biology, zoology, pharmaceuticals and food
  • Incubating, drying and storing (permanent storage at sub-zero temperatures excepted)
  • Ramp operation with rapid temperature changes when incubating, culturing or storing

Technical details

Interior volume108 l
Internal dimensions (W×H×D)560 × 480 × 400 mm (depth less 33 mm for the fan)
External dimensions (W×H×D)745 × 1,233 × 584 mm (depth plus 56 mm door handle)
Setting temperature range-12 to +60 °C (not suitable for permanent storage at sub-zero temperatures, in continuous operation the glass door can ice up)
Setting accuracy temperature0.1 °C
Temperature sensor2 Pt100 DIN class A, 4-wire measurement, mutual monitoring and function takeover in the event of a fault
Cooling/heating systemCompressor, CFC-free, refrigerant R290 propane, automatic defrost
ControlControlCOCKPIT TwinDISPLAY, adaptive digital PID microprocessor controller with 2 TFT colour graphic displays
TimerDigital countdown clock with target time indication, 1 min to 99 days, SetpointWAIT function
Temperature monitoringMechanical temperature limiter TB protection class 1 (DIN 12880), adjustable temperature monitor TWW protection class 3.3 or adjustable temperature limiter TWB protection class 2, AutoSAFETY ASF
InterfacesEthernet and USB port
DoorFully insulated stainless steel door with 2-point locking (compression door lock), inner glass door
Shelves standard/max.2 / 5
Max. load150 kg per unit / 20 kg per shelf
InstallationMobile and lockable on castors, distance to the wall at the back at least 15 cm, to the ceiling 20 cm, at the sides to wall or neighbouring unit at least 5 cm
Ambient conditionsHumidity max. 70 % non-condensing, max. 2,000 m above sea level, overvoltage category II, pollution degree 2
Voltage/power consumption230 V, 50/60 Hz, approx. 1,200 W; 115 V, 50/60 Hz (factory option X2), approx. 1,200 W
Net weight/gross weightapprox. 113 kg / approx. 141 kg (carton 880 × 1,410 × 810 mm)

Other sizes in the series

The ICP series comes in four sizes from 108 to 749 litres, all with TwinDISPLAY and the same setting temperature range of -12 to +60 °C:

ModelInternal volumeSetting temperatureDisplay
ICP110 (this page)108 l-12 to +60 °CTwinDISPLAY
ICP260256 l-12 to +60 °CTwinDISPLAY
ICP450449 l-12 to +60 °CTwinDISPLAY
ICP750749 l-12 to +60 °CTwinDISPLAY

Scope of delivery

  • 1× Memmert Compressor-Cooled incubator ICP110 (basic unit)
  • Factory calibration certificate at +10 °C and +37 °C
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • Inner glass door
  • 2× stainless steel grid shelf, electropolished

Regulatory information

The unit is an electrical device within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer Memmert GmbH + Co. KG is DE 66812464. Notes on returning old appliances can be found on our page Environment and disposal.

The cooling system works with the refrigerant R290 (propane).

Individual requirements and procurement service

These factory options are possible when ordering: 115 V instead of 230 V (X2), an interior socket (R3), lateral feedthroughs with 23 mm inner diameter (F0, F1), a silicone feedthrough with 40 mm inner diameter in the rear wall (F7), 4-20 mA current interfaces (V3, V6), fan speed monitoring (V4), a lockable door (B6), a potential-free alarm contact (H6), door-open detection (V5) and the SMS alarm MobileALERT (C3, requires H6). Prerequisites apply for individual options, which we clarify when you enquire.

Accessories include stainless steel grid shelves, reinforced grid shelves up to 60 kg load, perforated trays, drip trays (they can impair the spatial temperature distribution), a USB-Ethernet adapter, a 5 m Ethernet cable, the USB user ID stick and the FDA licence for AtmoCONTROL FDA and myChamber Control FDA. In addition there are calibrations at the factory and on site, DAkkS calibration, IQ/OQ documents, on-site qualification, short training as well as maintenance and a maintenance contract. For individual equipment, we gladly take your enquiry.

Volume: 108 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20165 for sizes 105, 110, 150 and 160
Manufacturer number: E20165

The E20165 stainless steel grid is an electropolished shelf for 43 Memmert models in sizes 105, 110, 150 and 160. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example IF110 or UF110.For sizes 110 and 160, 2 grids are fitted as standard, and the interior holds up to 5 grids (size 110) or 8 grids (size 160). The HCP105 and HCP150 humidity chambers have 2 perforated shelves as standard; the maximum number there is 6 (HCP105) and 10 (HCP150). According to Memmert, the load per shelf is 20 kg, and 15 kg for the HCP105 and HCP150. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material specimens and material samples, for example in the UF160Environmental tests and environmental simulations in the HCP105 and HCP150 humidity chambersSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)IF110bw2520108IF1102520108IN110plus2520108UF1102520108UN110pa2520108UN160pa2820161IF1602820161IN1602820161IF110plus2520108IF160plus2820161IN160plus2820161UF110plus2520108UN1102520108UN110plus2520108UF1602820161UF160plus2820161UN1602820161UN160plus2820161IN1102520108IPP110eco2520108IPP110ecoplus2520108HPP110eco2520108HCP1052 (perforated shelf)615107HCP1502 (perforated shelf)1015156ICH1102520108ICP1102520108IN110m2520108IN110mplus2520108IF110m2520108IF110mplus2520108IN160m2820161IN160mplus2820161IF160m2820161IF160mplus2820161UN110m2520108UN110mplus2520108UF110m2520108UF110mplus2520108UN160m2820161UN160mplus2820161UF160m2820161UF160mplus2820161UF160TS2820161The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP105 and HCP150Scope of delivery1 stainless steel grid, electropolished (E20165)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €98.04
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert reinforced stainless steel grid E29767 for sizes 110 and 160
Manufacturer number: E29767

The reinforced stainless steel grid E29767 is available for Memmert units in the U, Um, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It is electropolished and, according to Memmert, can bear up to 60 kg; for the standard grids in these sizes it is 20 kg per shelf. The grid is a shelf level in the interior. The size corresponds to the number in the unit name, for example IF110 or UF110.Please note the maximum load per unit, as it limits the total load of all shelves. The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Tempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Material tests in industrial manufacturing, for example in the UF160Suitable forModelSizeInterior volume (l)IF110110108IN110plus110108UF110110108IF160160161IN160160161IF110plus110108IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161IN110110108IPP110eco110108IPP110ecoplus110108HPP110eco110108ICH110110108ICP110110108IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmertup to 60 kgScope of delivery1 reinforced stainless steel grid, electropolishedIndividual requirements & procurement serviceFor standard grids, perforated trays and drip trays of the same size, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €257.14
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02073 for sizes 110 and 160
Manufacturer number: B02073

B02073 is a stainless steel slide-in drip tray with a 15 mm rim for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It collects dripping liquid. According to Memmert, the maximum load is 3 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example IF110 or UF110.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04359). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Drying laboratory glassware and sample vessels in routine operation, for example in the UF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenSuitable forModelSizeInterior volume (l)IF110110108IN110plus110108UF110110108UN110pa110108UN160pa160161IF160160161IN160160161IF110plus110108IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161IN110110108IPP110eco110108IPP110ecoplus110108HPP110eco110108ICH110110108ICP110110108IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UF160TS160161Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert3 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €117.82
memmert boden abtropfschale
Memmert stainless steel base drip tray B04359 for sizes 110 and 160
Manufacturer number: B04359

The B04359 base drip tray is made of stainless steel and has a 15 mm rim. It is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160 and collects dripping liquid. According to Memmert, the maximum load per base drip tray for these sizes is 3 kg. The size corresponds to the number in the unit name, for example IF110 or UF110.In addition, according to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02073). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Drying laboratory glassware and sample vessels in routine operation, for example in the UF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenSuitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelRim15 mmMaximum load according to Memmert3 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €171.14
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68508 for sizes 110 and 160
Manufacturer number: B68508

This stainless steel perforated tray (B68508) is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 110 and 160. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example IF110 or UF110. The image is for illustration only.According to Memmert, a maximum of 20 kg is permitted per shelf. If you want to load several shelves, also check the maximum load per unit in the data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material specimens and material samples, for example in the UF160Suitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €163.40