Skip to main content Skip to search Skip to main navigation

Memmert constant climate chamber HPP410eco, 384 litres, Peltier technology without a compressor

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert constant climate chamber HPP410eco, 384 litres, Peltier technology without a compressor"

Contract laboratories and manufacturers running several test programmes simultaneously under ICH conditions need capacity and accurate control. The Memmert HPP410eco constant-climate chamber offers an internal volume of 384 litres and space for up to 14 shelves; temperature and humidity are controlled via a Peltier heating and cooling system that requires no compressor and no conventional refrigerant, with the same control range as the smaller models in the HPPeco range: 0 to 70 °C without humidity control, 5 to 70 °C with active humidity control between 10 and 90 % rh.

Peltier cooling even under heavy loads

Like the other HPPeco models, the HPP410eco heats and cools via a Peltier element integrated into the rear panel; there is no conventional refrigeration circuit with a refrigerant whatsoever. Two DIN Class A Pt100 sensors in a 4-wire configuration monitor each other and automatically take over the function of the other sensor in the event of a fault; with 14 possible shelves and a total load of up to 200 kg, this is an important detail for long, unattended test runs. The setting accuracy is 0.1 °C; when exposed to light, the operating range narrows to 15 to 40 °C, with a maximum load of 20 kg per shelf.

Humidity control and ControlCOCKPIT TwinDISPLAY

Relative humidity is controlled between 10 and 90 % rh with an accuracy of 0.5 % rh; humidification is provided by a hot steam generator, whilst dehumidification is achieved via a cold trap using Peltier technology. The water supply is provided via an external canister with a connecting hose and a self-priming pump; a fixed water connection is not required. The chamber is operated via the ControlCOCKPIT TwinDISPLAY, which features two TFT colour graphic displays; an Ethernet interface and AtmoCONTROL software are available for documenting multiple parallel test programmes. The SetpointWait function ensures that the test time only begins once the temperature and humidity have actually reached the setpoint.

Selection guide: Choosing the right size within the HPPeco range

With a capacity of 384 litres and 14 shelves, the HPP410eco is one of the larger models among the four chambers compared here:

Memmert Constant-Climate Chamber HPP110eco108 litres, 560 x 480 x 400 mm, approx. 64 kg, up to 5 shelves
Memmert Constant-Climate Chamber HPP260eco256 litres, 640 x 800 x 500 mm, approx. 94 kg, up to 9 shelves
Memmert Constant-Climate Chamber HPP410eco384 litres, 640 x 1,200 x 500 mm, approx. 134 kg, up to 14 shelves
Memmert Constant-Climate Chamber HPP750eco749 litres, 1,040 x 1,200 x 600 mm, approx. 197 kg, up to 14 shelves

Those who regularly require an even larger sample capacity whilst maintaining a similar number of shelves will find the Memmert HPP750eco constant climate chamber (749 litres) to be the next size up, offering, amongst other things, a higher load capacity per shelf. For smaller, less frequent test runs, the HPP260eco or HPP110eco are often the more economical choice; technically, the models differ mainly in volume, dimensions, weight and connected load. You can find an overview of the entire Memmert range of climate chambers and incubators in the Climate Chambers & Incubators category.

Differences: HPPeco or ICH110?

The Memmert ICH110 climate chamber covers a wider temperature range from -10 to +60 °C and uses a compressor-based, CFC-free R290 system with automatic defrosting; however, at 108 litres, it falls into a significantly smaller volume class than the HPP410eco. For test programmes that remain within the 0 to 70 °C range and process larger batch sizes in parallel, the Peltier technology of the HPP410eco, with a connected load of around 420 W, remains the more energy-efficient option compared to the ICH110’s approximately 1,350 W.

Installation, water connection and disposal

A minimum distance of 15 cm from the wall, a minimum distance of 20 cm from the ceiling and a minimum side clearance of 5 cm must be maintained; the unit may be installed at altitudes of up to 2,000 m above sea level at an ambient temperature of 16 to 40 °C and a maximum relative humidity of 70 %, non-condensing. A fixed water connection in the installation room is not required; the supplied water canister with connecting hose provides the water supply for the humidity control. For disposal as waste electrical and electronic equipment (WEEE), Memmert is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.

Which equipment for which testing purpose

Where several test programmes are being documented in parallel, a USB-to-Ethernet adapter is recommended, together with AtmoCONTROL or myChamber software licences, which can be supplied as AtmoCONTROL FDA for 21 CFR Part 11 environments if required. For long, unattended runs, a potential-free contact for connection to a central control system and a MobileALERT SMS alert system can be added. If several user groups with different access rights are using the device, a lockable door and a USB user ID stick for the TwinDISPLAY are available as options. For permanent installation in the test room, a built-in frame with or without ventilation is also available.

Typical applications

With an internal volume of 384 litres and up to 14 shelves, the Memmert HPP410eco constant-climate chamber is designed for contract laboratories and manufacturers running multiple ICH test programmes simultaneously.

  • Parallel long-term and intermediate storage studies of multiple active substances in accordance with ICH Q1A
  • Stability testing for cosmetic and food batches on an industrial development scale
  • Material testing with higher sample throughput in industry
  • Environmental testing from freezing point upwards for several parallel test series

Frequently asked questions about the Memmert HPP410eco constant-climate chamber

What temperature and humidity range does the HPP410eco cover?
Depending on the operating mode, 0 to 70 °C without humidity or 5 to 70 °C with active humidity control between 10 and 90 % rh; with light exposure, the operating range is restricted to 15 to 40 °C.

Does the chamber require a fixed water connection?
No. An external water canister with a connecting hose supplies the humidity control system via a self-priming pump; a fixed water connection in the installation room is not required.

How many samples can fit into the HPP410eco?
Two shelves are included as standard; a total of up to 14 shelves, each with a maximum load of 20 kg, can be fitted, with the total load not exceeding 200 kg.

When does it make sense to switch to the HPP750eco?
If you regularly require a larger sample volume with a higher load capacity per shelf, the HPP750eco, with a capacity of 749 litres and up to 30 kg per shelf, offers greater capacity whilst utilising the same control technology.

What distinguishes the HPP410eco from the Memmert ICH110 climate chamber?
The HPP410eco cools between 0 and 70 °C using a Peltier element without a compressor or refrigerant, whilst the ICH110 operates with a compressor-based refrigeration cycle (R290) and also covers a range down to -10 °C, albeit with an internal volume of only 108 litres.

What software is available for documentation and validation?
The chamber can be managed and data read out via Ethernet using the AtmoCONTROL software; for environments where 21 CFR Part 11 compliance is mandatory, Memmert also offers the AtmoCONTROL FDA licence option.

How is calibration carried out?
The factory calibration certificate covers the standard values of 25 °C at 60 % rh and 40 °C at 75 % rh; in addition, three freely selectable temperature and humidity values each can be calibrated by the user. For DAkkS-accredited calibrations and IQ/OQ/PQ, we arrange suitable services.

Technical details

Adjustable temperature range (without light, without humidity)0 to 70 °C
Adjustable temperature range (with humidity)5 to 70 °C
Operating temperature range with light15 to 40 °C
Temperature setting accuracy0.1 °C
Temperature sensor2x Pt100, DIN Class A, 4-wire measurement
Adjustable humidity range10 to 90 % rh
Humidity setting accuracy0.5 % rh
Internal volume384 l
Internal dimensions (W x H x D)640 x 1,200 x 500 mm (depth minus 32 mm for the fan)
External dimensions of the housing (W x H x D)824 x 1,720 x 655 mm
Net weightapprox. 134 kg
Connection 230 V50/60 Hz, approx. 420 W
Connection 115 V50/60 Hz, approx. 420 W
Shelves maximum14
Shelves in scope of delivery2
Max. load on unit200 kg
Max. load per shelf20 kg
Housing materialTextured stainless steel housing, fully galvanised sheet steel rear panel
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2 TFT colour graphic displays
Timer1 minute to 99 days, digital countdown timer
Permissible ambient temperature16 to 40 °C
Permissible relative humiditymax. 70 % rel., non-condensing
Maximum installation altitude2,000 m
MarkingsCE, EAC, UL marks

Scope of delivery

  • 1x Memmert Constant-Climate Chamber HPP410eco
  • Standard factory calibration certificate (25 °C / 60 % rh, 40 °C / 75 % rh)
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • Inner glass door
  • Moisture-tight silicone feed-through (internal diameter 18 mm) with silicone plug
  • 2x stainless steel grid shelf, electropolished
  • Water canister including connection hose

Regulatory information

The Memmert HPP410eco constant-climate chamber is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B42116) or without air slots (B42117). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements & procurement service

Options available for the HPP410eco include a built-in frame with or without ventilation, a potential-free contact for building management systems, and a lockable door. For data acquisition, a USB-to-Ethernet adapter and AtmoCONTROL and myChamber software licences are available; licences for 21 CFR Part 11 (AtmoCONTROL FDA) are also available. In addition, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request. Do you require any of these accessories, a special configuration or assistance in selecting the appropriate size for your application? Through our procurement service, we will be happy to assist you with procurement and configuration.

Volume: 384 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E28891 for sizes 260 and 410
Manufacturer number: E28891

The E28891 stainless steel grid is an electropolished shelf for 26 Memmert models in sizes 260 and 410. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UN260 or IF260.All 26 models have 2 grids as standard. The maximum number is 9 grids (size 260) and 14 grids (size 410). According to Memmert, the load per shelf is 20 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying several sample series in parallel in routine operation, for example in the UF260Incubating extensive sample series in research and medicine, for example in the IF260Parallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoMicrobiological examinations and microbial count determination in the routine laboratory, for example in the IPP410ecoSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UN260plus2920256UN2602920256IF260plus2920256IN260plus2920256IF2602920256IN2602920256UF2602920256UF260plus2920256IF260bw2920256IPP260eco2920256IPP260ecoPlus2920256IPP410eco21420384IPP410ecoplus21420384HPP260eco2920256HPP410eco21420384ICH2602920256ICP2602920256IN260m2920256IN260mplus2920256IF260m2920256IF260mplus2920256UN260m2920256UN260mplus2920256UF260m2920256UF260mplus2920256UF260TS2920256The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel grid, electropolished (E28891)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €126.42
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B29726 for sizes 260 and 410
Manufacturer number: B29726

The stainless steel slide-in drip tray B29726 is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 4 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UN260 or IF260.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B29722). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP410ecoShelf-life tests on dairy products, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert4 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €164.26
memmert boden abtropfschale
Memmert stainless steel base drip tray B29722 for sizes 260 and 410
Manufacturer number: B29722

B29722 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. It collects dripping liquid. According to Memmert, the maximum load is 4 kg per base drip tray. The size corresponds to the number in the unit name, for example UN260 or IF260.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B29726). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Forcing tests for beer stability, for example in the IPP410ecoShelf-life tests on dairy products, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert4 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €209.84
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68510 for sizes 260 and 410
Manufacturer number: B68510

The B68510 stainless steel perforated tray is intended for Memmert units in the U, Um, UF TS, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 260 and 410. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UN260 or IF260. The image is for illustration only.According to Memmert, the maximum load per shelf for these sizes is 20 kg. In addition, the maximum load per unit limits the loading; it is stated in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying several sample series in parallel in routine operation, for example in the UF260Incubating extensive sample series in research and medicine, for example in the IF260Parallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoMicrobiological examinations and microbial count determination in the routine laboratory, for example in the IPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IF260bw260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF260TS260256Technical detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €206.40
Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert reinforced stainless steel grid E29766 for sizes 260 and 410
Manufacturer number: E29766

The reinforced stainless steel grid E29766 is electropolished and, according to Memmert, can bear up to 60 kg. According to Memmert, the standard grids carry 20 kg per shelf in these sizes. The grid is a shelf level in the interior. It is intended for Memmert units in the U, Um, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 260 and 410. The size corresponds to the number in the unit name, for example UN260 or IF260.Please note the maximum load per unit, as it limits the total load of all shelves. The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsTypical uses in the compatible units:Heat treatment and drying of larger material batches in industry, for example in the UN260Material tests and quality assurance with high sample throughput, for example in the UN260Materials and material testing with higher sample throughput in industry, for example in the HPP410ecoSuitable forModelSizeInterior volume (l)UN260plus260256UN260260256IF260plus260256IN260plus260256IF260260256IN260260256UF260260256UF260plus260256IPP260eco260256IPP260ecoPlus260256IPP410eco410384IPP410ecoplus410384HPP260eco260256HPP410eco410384ICH260260256ICP260260256IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN260m260256UN260mplus260256UF260m260256UF260mplus260256Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmertup to 60 kgScope of delivery1 reinforced stainless steel grid, electropolishedIndividual requirements & procurement serviceFor standard grids, perforated trays and drip trays of the same size, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €347.44