Skip to main content Skip to search Skip to main navigation

Memmert paraffin cabinet UN160pa, 161 l, +20 to +80 °C, TwinDISPLAY

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert paraffin cabinet UN160pa, 161 l, +20 to +80 °C, TwinDISPLAY"

With an internal capacity of 161 litres, the Memmert UN160pa paraffin cabinet is the largest model in the UN-pa series and can accommodate up to eight shelves. The virtually gas-tight interior is designed to ensure uniform heating of embedding media such as paraffin or wax and is used for sample preparation in histology, pathology and microbiology. Control is via the ControlCOCKPIT TwinDISPLAY with two TFT colour graphic displays; the setting temperature range extends from +20 to +80 °C.

Chamber for the largest batch size in the series

The interior measures 560 x 720 x 400 mm; the external dimensions of the housing are 745 x 1104 x 584 mm, plus 56 mm for the door handle. Two electropolished stainless steel grid shelves are supplied as standard with the unit; up to eight shelves can be fitted in total. The maximum permissible total load is 210 kg, with 20 kg per shelf. The net weight is approx. 96 kg; in the shipping carton, measuring 830 x 1300 x 800 mm, the gross weight of the consignment is approx. 122 kg.

Virtually gas-tight interior for paraffin and wax

The interior is designed to be virtually gas-tight, is easy to clean and is reinforced by deep-drawn ribbing. A protected, integrated 4-sided all-round heating system surrounds the chamber; the fully insulated stainless steel door closes with a 2-point locking mechanism as a compression door lock. The housing has a fully galvanised sheet steel rear panel. Each unit is supplied with a factory calibration certificate at +80 °C.

Control via ControlCOCKPIT TwinDISPLAY

The adaptive, multifunctional PID microprocessor controller operates with two high-resolution TFT colour graphic displays and can be set to nine languages, including German, English, Chinese and Polish. Two DIN Class A Pt100 sensors use 4-wire technology and monitor each other; in the event of a fault, one sensor takes over the function of the other. The setting accuracy is 0.1 °C. The HeatBALANCE function allows the distribution of heating power between the upper and lower heating groups to be adjusted from -50 to +50 %, whilst SetpointWAIT only starts the process time once the setpoint temperature has been reached. A digital countdown timer with target time display covers durations from 1 minute to 99 days; three freely selectable temperature values can be calibrated. Programmes are created, managed and transferred via Ethernet or USB using the AtmoCONTROL software; the programme sequence is saved in the event of a power cut. Convection operates on the principle of natural ventilation without a fan.

Safety concept with multiple monitoring levels

A mechanical temperature limiter of protection class 1 according to DIN 12880 switches off the heating when the temperature reaches approximately 20 °C above the maximum cabinet temperature. An adjustable temperature monitor (Protection Class 3.1) or an adjustable temperature limiter (Protection Class 2) can also be selected via the display. AutoSAFETY tracks the setpoint at a freely selectable interval, signals any overshoots or undershoots visually and acoustically, and switches off the heating if the setpoint is exceeded. A self-diagnostic system checks the unit for malfunctions. Permissible operating conditions include an ambient temperature of +5 °C to +40 °C, a relative humidity of up to 80 % (non-condensing) and an installation altitude of up to 2,000 m above sea level.

The UN-pa series compared by size

With a capacity of 161 litres, the UN160pa is the largest model in the UN-pa series; there is no larger capacity available within this range. If a smaller internal volume is sufficient for the sample quantity, the UN110pa, with a capacity of 108 litres, is the next smaller model; see the size table below.

Typical applications

The UN160pa is designed for reliable sample preparation in pathology, science and research, as well as in histology and microbiology. It is used for preparing microscopic slides in the laboratory. The virtually gas-tight interior is designed for the precise and uniform heating of embedding media such as paraffin or wax.

Technical details

Setting temperature range+20 to +80 °C
Working temperature rangeat least 5 °C above room temperature up to +80 °C
Temperature setting accuracy0.1 °C
Temperature sensor2x Pt100, DIN Class A, 4-wire measurement, cross-monitoring
Internal volume161 l
Internal dimensions (W x H x D)560 x 720 x 400 mm
External dimensions of housing (W x H x D)745 x 1104 x 584 mm (plus 56 mm door handle)
Net weightapprox. 96 kg
Connected load 230 V50/60 Hz, approx. 1,600 W
Connected load 115 V (factory option X2, at no extra cost)50/60 Hz, approx. 900 W
Maximum number of shelves8
Shelves included in scope of delivery2
Max. load capacity210 kg
Max. load per shelf20 kg
InteriorVirtually gas-tight, deep-drawn ribbed, 4-sided all-round heating
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displays
Additional functionsHeatBALANCE, SetpointWAIT, AutoSAFETY, visual and audible alarm
Permissible ambient temperature+5 °C to +40 °C
Permissible relative humiditymax. 80 % rel., non-condensing
Maximum installation altitude2,000 m
MarkingsCE, VDE GS, UL, EAC

Other sizes in the series

The UN-pa series comprises five sizes ranging from 32 to 161 litres, listed below by internal volume:

ModelInternal volumeSet temperatureDisplay
UN30pa32 l+20 to +80 °CTwinDISPLAY
UN55pa53 l+20 to +80 °CTwinDISPLAY
UN75pa74 l+20 to +80 °CTwinDISPLAY
UN110pa108 l+20 to +80 °CTwinDISPLAY
UN160pa (this page)161 l+20 to +80 °CTwinDISPLAY

Scope of delivery

  • 1x Memmert paraffin cabinet UN160pa
  • Factory calibration certificate at +80 °C
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • 2x stainless steel grid shelf, electropolished

Regulatory information

This appliance is an electrical appliance within the meaning of the German Electrical and Electronic Equipment Act (ElektroG). The WEEE registration number of the manufacturer, Memmert GmbH + Co. KG, is DE 66812464. Information on the return of old appliances can be found on our Environment and Disposal page.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29736) or without air slots (B29737). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

For the UN160pa, the following are available ex-works: a full-view glass door with 4-layer insulating glazing, gas inlet and outlet connections, side or rear feed-throughs, a lockable door, a left-hand door hinge, a process-dependent programmable door lock, a door-open detection system and a castor frame. Accessories available include additional stainless steel grid shelves and a perforated tray, drip trays, a wall bracket, a USB-to-Ethernet adapter, levelling feet, built-in frames and levelling or mobile base frames, as well as an AtmoCONTROL-FDA software licence. For qualification and maintenance, we arrange calibration, DAkkS calibration, IQ/OQ and maintenance services. We are happy to advise you personally on your specific requirements.

Certification marks: GS (VDE)
Volume: 161 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20165 for sizes 105, 110, 150 and 160
Manufacturer number: E20165

The E20165 stainless steel grid is an electropolished shelf for 43 Memmert models in sizes 105, 110, 150 and 160. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example IF110 or UF110.For sizes 110 and 160, 2 grids are fitted as standard, and the interior holds up to 5 grids (size 110) or 8 grids (size 160). The HCP105 and HCP150 humidity chambers have 2 perforated shelves as standard; the maximum number there is 6 (HCP105) and 10 (HCP150). According to Memmert, the load per shelf is 20 kg, and 15 kg for the HCP105 and HCP150. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material specimens and material samples, for example in the UF160Environmental tests and environmental simulations in the HCP105 and HCP150 humidity chambersSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)IF110bw2520108IF1102520108IN110plus2520108UF1102520108UN110pa2520108UN160pa2820161IF1602820161IN1602820161IF110plus2520108IF160plus2820161IN160plus2820161UF110plus2520108UN1102520108UN110plus2520108UF1602820161UF160plus2820161UN1602820161UN160plus2820161IN1102520108IPP110eco2520108IPP110ecoplus2520108HPP110eco2520108HCP1052 (perforated shelf)615107HCP1502 (perforated shelf)1015156ICH1102520108ICP1102520108IN110m2520108IN110mplus2520108IF110m2520108IF110mplus2520108IN160m2820161IN160mplus2820161IF160m2820161IF160mplus2820161UN110m2520108UN110mplus2520108UF110m2520108UF110mplus2520108UN160m2820161UN160mplus2820161UF160m2820161UF160mplus2820161UF160TS2820161The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP105 and HCP150Scope of delivery1 stainless steel grid, electropolished (E20165)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €98.04
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €46.44
memmert untergestell fahrbar
Memmert mobile base frame B29750, height 560 mm, for sizes 110 and 160
Manufacturer number: B29750

The mobile base frame B29750 is 560 mm high.It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The levelling version with a height of 500 mm is also available (B29749), as is a flat base frame with a height of 130 mm (B33661). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example IF110 or UF110.Typical applicationsUnits of sizes 110 and 160 are placed on the base frame. Typical uses of these units:Tempering, ageing and baking of material specimens and material samples, for example in the UF160Incubating several sample series at the same time in research and medicine, for example in the IF110Vibration-free drying of dust- or air-sensitive materials in several batches, for example in the UN110Cooled incubation of larger sample quantities or several parallel test series below room temperature, for example in the IPP110ecoSuitable forModelSizeInterior volume (l)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 detailsHeight560 mmScope of delivery1 mobile base frame, height 560 mmIndividual requirements & procurement serviceFor the flat and the levelling version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €497.08
Memmert levelling base frame B33661, height 130 mm, for sizes 110 and 160
Manufacturer number: B33661

The levelling base frame B33661, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The size corresponds to the number in the unit name, for example IF110 or UF110.The base frame B29749 with a height of 500 mm is also available for these sizes. The table of compatible models shows which series is available in which size.Typical applicationsUnits of sizes 110 and 160 are placed on the base frame. Typical uses of these units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Tempering larger batches in the pharmaceutical industry, for example in the IF160Production of microscopic specimens in the laboratory, for example in the UN160pa paraffin ovenMaterials testing in industrial quality assurance, for example in the HPP110ecoSuitable forModelSizeInterior volume (l)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 detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €273.48
Memmert Wandkonsole
Memmert wall bracket B29759 for size 160
Manufacturer number: B29759

The wall bracket B29759 is intended for wall mounting of Memmert units in the I, Im, U, UNpa and Um series in size 160. The table of compatible models shows which series is available in this size. The image is a Memmert drawing and is for illustration only. The size corresponds to the number in the unit name, for example IF160 or IN160.Typical applicationsTypical uses in the compatible units:Parallel incubation of several sample series in research and medicine, for example in the IF160Unattended drying of medium to larger batches overnight or at weekends, for example in the UF160plusPreparation of microscopic specimens in the laboratory, for example in the UN160paSuitable forModelSizeInterior volume (l)IF160160161IN160160161IF160plus160161IN160plus160161IF160m160161IN160m160161IF160mplus160161IN160mplus160161UF160160161UN160160161UF160plus160161UN160plus160161UN160pa160161UF160m160161UN160m160161UF160mplus160161UN160mplus160161Scope of delivery1 wall bracket for wall mountingIndividual requirements & procurement serviceFor questions about wall mounting and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €314.76
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02073 for sizes 110 and 160
Manufacturer number: B02073

B02073 is a stainless steel slide-in drip tray with a 15 mm rim for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160. It collects dripping liquid. According to Memmert, the maximum load is 3 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example IF110 or UF110.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04359). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Drying laboratory glassware and sample vessels in routine operation, for example in the UF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenSuitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelRim15 mmMaximum load according to Memmert3 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €117.82
memmert boden abtropfschale
Memmert stainless steel base drip tray B04359 for sizes 110 and 160
Manufacturer number: B04359

The B04359 base drip tray is made of stainless steel and has a 15 mm rim. It is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH and HPPeco series in sizes 110 and 160 and collects dripping liquid. According to Memmert, the maximum load per base drip tray for these sizes is 3 kg. The size corresponds to the number in the unit name, for example IF110 or UF110.In addition, according to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02073). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying larger quantities of laboratory glassware and sample containers, for example in the UN110Drying laboratory glassware and sample vessels in routine operation, for example in the UF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenSuitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelRim15 mmMaximum load according to Memmert3 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €171.14
memmert untergestell nivellierbar
Memmert levelling base frame B29749, height 500 mm, for sizes 110 and 160
Manufacturer number: B29749

B29749 is a levelling base frame with a height of 500 mm for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco and IFbw series in sizes 110 and 160. The size corresponds to the number in the unit name, for example IF110 or UF110.A flat base frame with a height of 130 mm is also available (B33661). The mobile version with a height of 560 mm is also available (B29750). The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsUnits of sizes 110 and 160 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Embedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenStability studies of individual active substance batches according to ICH Q1A in pharmaceutical quality assurance, for example in the HPP110ecoSuitable forModelSizeInterior volume (l)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 detailsHeight500 mmScope of delivery1 levelling base frame, height 500 mmIndividual requirements & procurement serviceFor the flat and the mobile version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €350.88
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68508 for sizes 110 and 160
Manufacturer number: B68508

This stainless steel perforated tray (B68508) is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco, ICP, ICH, HPPeco and IFbw series in sizes 110 and 160. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example IF110 or UF110. The image is for illustration only.According to Memmert, a maximum of 20 kg is permitted per shelf. If you want to load several shelves, also check the maximum load per unit in the data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and medium-sized sample series in routine operation, for example in the UF110Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material specimens and material samples, for example in the UF160Suitable forModelSizeInterior volume (l)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 detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €163.40