Skip to main content Skip to search Skip to main navigation

Memmert universal oven UF75plus, compact heating and drying oven with forced convection and TwinDISPLAY, 74 litres, up to 300 °C

ⓘ  This product description has been translated from German using AI. Despite careful review, we do not guarantee that the translation is error-free; in case of doubt, the German version shall prevail.

Product information "Memmert universal oven UF75plus, compact heating and drying oven with forced convection and TwinDISPLAY, 74 litres, up to 300 °C"

For those who wish to benefit from the process reliability of TwinDISPLAY without immediately investing in a larger model, the Memmert universal oven UF75plus offers a compact solution: 74 litres’ internal volume, a temperature range of 20 to 300 °C and two redundant Pt100 sensors that monitor each other. If one sensor fails, the second automatically takes over. With up to 6 shelves and a maximum total load capacity of 120 kg, the UF75plus remains compact enough for the laboratory bench.

Forced air circulation with redundant temperature measurement in a compact design

The UF75plus’s air turbine, which can be electronically controlled in 10 % increments, actively distributes heat throughout the chamber and operates within a temperature range of at least 10 °C above room temperature up to 300 °C. Two DIN Class A Pt100 sensors in a 4-wire configuration monitor each other and ensure a setting accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards, even if one of the two sensors fails. Preheated fresh air is introduced via an electronically adjustable exhaust air damper; the exhaust air outlet with throttle valve can also be controlled electronically.

ControlCOCKPIT TwinDISPLAY: HeatBALANCE and AutoSAFETY

The UF75plus is controlled via the ControlCOCKPIT TwinDISPLAY, which features two high-resolution TFT colour graphic displays. The HeatBALANCE function allows for fine-tuning of the heat output distribution between the upper and lower heating groups from -50 to +50 %. AutoSAFETY also monitors over- and under-temperature conditions, automatically tracks the setpoint within a freely selectable tolerance range and triggers visual and audible alarms in the event of a deviation; if the setpoint is exceeded, the heating system switches off. Programmes are programmed, managed and transferred via an Ethernet interface or USB port using the AtmoCONTROL software. A programmable door lock and a door-open detection feature can be added as options, functions that are exclusive to TwinDISPLAY units.

Capacity and dimensions of the Memmert universal oven UF75plus

The interior measures 400 x 560 x 330 mm; the external dimensions of the housing are 585 x 944 x 514 mm, and the net weight is approximately 66 kg, identical to that of the base model UF75. Two electropolished stainless steel grid shelves are included as standard; up to six shelves are possible in total. The maximum total load is 120 kg, with a maximum of 20 kg per shelf. The interior consists of easy-to-clean stainless steel, reinforced by deep-drawn ribbing, with protected, integrated 4-sided all-round heating; the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. The UF75plus can be connected either to 230 V (approx. 2,500 W) or 115 V (approx. 1,800 W), in each case at 50/60 Hz.

Selection guide: choosing the right size from the UF range

The Memmert UF range with forced air circulation comprises eight models with internal volumes ranging from 53 to 1,060 litres, each of which is also available with TwinDISPLAY. When selecting the right size, the key factors to consider, alongside the volume, are the footprint and the number of shelves required.

ModelInternal volume
UF5553 l, footprint 585 x 514 mm, max. 4 shelves
UF7574 l, footprint 585 x 514 mm, max. 6 shelves
UF110108 l, footprint 745 x 584 mm, max. 5 shelves
UF160161 l, footprint 745 x 584 mm, max. 8 shelves
UF260256 l, footprint 824 x 684 mm, max. 9 shelves
UF450449 l, footprint 1,224 x 784 mm, max. 8 shelves
UF750749 l, footprint 1,224 x 784 mm, max. 14 shelves
UF10601,060 l, footprint 1,224 x 1,035 mm, max. 14 shelves

The UF75plus is the obvious choice when the Memmert universal oven UF55plus (53 litres) reaches its capacity limit, but you still wish to use TwinDISPLAY. If you require more capacity, you will find it in the Memmert universal oven UF110plus (108 litres). You can find all sizes in this range in our Climate Chambers & Incubators range.

Distinction: TwinDISPLAY versus SingleDISPLAY, and natural convection

Those who can do without sensor redundancy can save money by opting for the identically built Memmert universal oven UF75 in the basic model with SingleDISPLAY. For samples sensitive to dust or air movement that cannot tolerate active air circulation, the Memmert universal oven UN75plus offers the same housing with natural convection instead of an air turbine, and still features TwinDISPLAY. Those requiring less internal volume will find the Memmert universal oven UF55plus, the more compact TwinDISPLAY model with the same footprint.

Safety according to DIN 12880, enhanced by AutoSAFETY

In addition to the adjustable electronic temperature monitoring and AutoSAFETY, the UF75plus is fitted with a mechanical temperature limiter of protection class 1 according to DIN 12880, which switches off the heating when the temperature reaches approximately 20 °C above the maximum cabinet temperature. The display also allows you to select either an adjustable temperature monitor (protection class 3.1) or an adjustable temperature limiter (protection class 2). An integrated self-diagnostic system assists with fault-finding, and three freely selectable temperature values can be calibrated. The unit bears CE and EAC markings as well as a UL mark.

Installation, operation and disposal

For operation, a minimum distance of 15 cm from the wall and a minimum distance of 20 cm from the ceiling must be maintained; a minimum of 5 cm is sufficient on either side in relation to the wall or an adjacent unit. The unit may be installed at altitudes of up to 2,000 m above sea level at an ambient temperature of 5 °C to 40 °C and a relative humidity of no more than 80 %, non-condensing. Electrically, the UF75plus is designed for overvoltage category II and pollution degree 2; it must only be transported in an upright position. The interior, made of easy-to-clean stainless steel, can be cleaned using standard laboratory cleaning agents. As an electrical appliance, the UF75plus is subject to the German Electrical and Electronic Equipment Act (ElektroG) at the end of its service life and must not be disposed of with household waste; see Regulatory information below.

Typical applications

With an internal volume of 74 litres and redundant sensor technology, the Memmert universal oven UF75plus is suitable for compact laboratory workstations with heightened requirements for process reliability.

  • Unattended overnight drying of small to medium-sized batches
  • Tempering, ageing and baking of material samples subject to documentation requirements
  • Testing and curing in quality assurance
  • Time-critical sample preparation requiring high reliability
  • A first step into TwinDISPLAY technology without taking up much space

Investment rationale: when TwinDISPLAY is worthwhile

The scope of delivery for the UF75plus includes 2 electropolished stainless steel grid shelves; the oven is designed to accommodate up to 6 shelves. TwinDISPLAY is particularly useful where processes run unattended overnight and a sensor failure would jeopardise the batch. Those who do not require this redundancy can save money by opting for the Memmert universal oven UF75 in its basic model, which is of identical construction. A fully transparent glass door is available as an option for visual inspection without opening the door, as is a programmable door lock with door-open detection. A USB-to-Ethernet adapter and AtmoCONTROL software licences are available for continuous logging. For pharmaceutical or standards-based applications, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request.

Frequently asked questions before making a purchase

What exactly are the benefits of the second Pt100 sensor?
If one sensor fails, the second one automatically takes over its function, offering an improvement in safety compared with the single-sensor system of the SingleDISPLAY base model.

How many samples can the UF75plus hold at one time?
Two grid shelves are included as standard; up to six shelves are possible, each with a maximum load of 20 kg, for a total load of up to 120 kg.

Is TwinDISPLAY worth it for this size?
For simple drying tasks during the day, SingleDISPLAY is usually sufficient. For unattended overnight runs, the UF75plus is the safer choice compared to the Memmert universal oven UF75.

What is the accuracy of the temperature control?
The two redundant Pt100 sensors of DIN class A in 4-wire measurement achieve an accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards.

Can I place the UF75plus on a laboratory bench?
Yes, with a net weight of around 66 kg and a footprint of 585 x 514 mm, the UF75plus is designed for use on a laboratory bench, provided that the bench can safely support the load.

Is a natural convection version available with TwinDISPLAY?
Yes, the Memmert universal oven UN75plus shares the same housing as the UF75plus, but operates without an air turbine.

Is a programmable door lock available?
Yes, a programmable door lock and door-open detection are options available exclusively on TwinDISPLAY devices such as the UF75plus.

How does the UF75plus differ from the smaller UF55plus?
Both feature TwinDISPLAY and two redundant Pt100 sensors; the UF75plus offers greater capacity, 74 litres instead of 53, and 6 shelves instead of 4, whilst occupying the same floor space.

Technical details

Adjustable temperature range20 to 300 °C
Working temperature rangeat least 10 °C above room temperature up to 300 °C
Temperature setting accuracyup to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C
Temperature sensor2x Pt100, DIN Class A, 4-wire measurement, redundant
Internal volume74 l
Internal dimensions (W x H x D)400 x 560 x 330 mm (depth minus 39 mm for the fan)
External dimensions of the housing (W x H x D)585 x 944 x 514 mm
Net weightapprox. 66 kg
230 V connection50/60 Hz, approx. 2,500 W
115 V connection50/60 Hz, approx. 1,800 W
Shelves max.6
Shelves included in the scope of delivery2
Max. load on the unit120 kg
Max. load per shelf20 kg
Interior materialsStainless steel, 4-sided all-round heating
Housing materialTextured stainless steel, galvanised sheet steel rear panel
ControlControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displays
Additional functionsHeatBALANCE, AutoSAFETY, visual and audible alarm
Permissible ambient temperature5 °C to 40 °C
Permissible humiditymax. 80 % relative humidity, non-condensing
Max. installation altitude2,000 m
LabellingCE, EAC, UL marks

Scope of delivery

  • 1x Memmert universal oven UF75plus
  • Factory calibration certificate (calibration at 160 °C)
  • Fully insulated stainless steel doors with a 2-point locking system (compression door lock)
  • 2x stainless steel grid shelf, electropolished

Regulatory information

The Memmert universal oven UF75plus is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.

Installation in a wall opening

For fixed installation in a wall opening, Memmert offers a flush-fit unit. It covers the gap between the unit and the wall opening with stainless steel and is available with air slots (B29732) or without air slots (B29733). According to Memmert, the installation situation must be clarified technically beforehand. The flush-fit unit is therefore available on request through our procurement service.

Individual requirements and procurement service

Optional extras available for the UF75plus include full-view glass doors, interior lighting and a power socket, a reversible door hinge, a potential-free alarm contact and a USB user ID stick for TwinDISPLAY user rights. For data acquisition, a USB-to-Ethernet adapter and AtmoCONTROL software licences, including the AtmoCONTROL FDA version for 21 CFR Part 11, are available. In addition, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request. Do you require any of these accessories or assistance in selecting the right universal oven for your application? Through our procurement service, we are happy to assist you with procurement and configuration.

Certification marks: GS (VDE)
Volume: 74 l
Skip product gallery

Matching accessories

Memmert Edelstahl-Gitterrost, Zeichnung verschiedener Größen
Memmert stainless steel grid E20164 for sizes 50, 55 and 75
Manufacturer number: E20164

The E20164 stainless steel grid is an electropolished shelf for Memmert cabinets in sizes 50, 55 and 75. It fits universal ovens, incubators, Peltier cooling incubators and the HCP50 humidity chamber, 37 models in total. Each grid is a shelf level for the items loaded into the interior. If you need more shelf levels than are fitted as standard, you can add grids up to the maximum number in the table. The size corresponds to the number in the unit name, for example UF55 or UN55.The load per shelf is 20 kg for all models, only for the HCP50 it is 15 kg. The image is for illustration only. It is a Memmert drawing showing grids of different sizes.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Environmental tests and environmental simulations in the HCP50 humidity chamberSuitable forThe table shows for each model the number of grids included in the scope of delivery of the unit, the maximum possible number and the load per shelf. The HCP50 comes with a perforated shelf as standard; the grid is optional there.ModelGrids as standardMaximum number of gridsLoad per shelf (kg)Interior volume (l)UF55142053UF55plus142053UN55142053UN55plus142053UF75262074UF75plus262074UN75262074UN75plus262074UF55m142053UF55mplus142053UN55m142053UN55mplus142053UF75m262074UF75mplus262074UN75m262074UN75mplus262074UN55pa142053UN75pa262074IF55142053IF55plus142053IN55142053IN55plus142053IF75262074IF75plus262074IN75262074IN75plus262074IF55m142053IF55mplus142053IN55m142053IN55mplus142053IF75m262074IF75mplus262074IN75m262074IN75mplus262074IPP55142053IPP55plus142053HCP501 (perforated shelf)51556The permissible total load of the unit additionally limits the loading. Please refer to the information in the unit’s data sheet.Technical detailsMaterialStainless steelSurfaceelectropolishedLoad per shelf according to Memmert20 kg, 15 kg for the HCP50Scope of delivery1 stainless steel grid, electropolished (E20164)Individual requirements & procurement serviceFor further grids, perforated trays or reinforced grids, and for questions about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €65.36
memmert rohrverlaengerung gerade
Memmert straight slip-on pipe extension B29718 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29718

The straight slip-on pipe extension B29718 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The angled version is also available (B29719). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in industrial quality assurance, for example in the UN110Drying and tempering of large, heavy components in industrial manufacturing, for example in the UF1060Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 straight slip-on pipe extensionIndividual requirements & procurement serviceFor the angled version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €41.28
memmert rohrverlaengerung gewinkelt
Memmert angled slip-on pipe extension B29719 for sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060
Manufacturer number: B29719

The angled slip-on pipe extension B29719 discharges the exhaust air and can be used to connect a hose if required. The pipe measures 60.3 mm on the outside and 57 mm on the inside.It is intended for Memmert U and Um universal ovens and I and Im incubators in sizes 30, 55, 75, 110, 160, 260, 450, 750 and 1060. The straight version is also available (B29718). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Parallel incubation of several sample series in research and medicine, for example in the IF160Tempering, ageing and baking of material samples in series, for example in the UN260Testing and curing of larger components in quality assurance, for example in the UF750Suitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN450plus450449UF450plus450449UF450450449UN450450449UF750plus750749UF750750749UN750750749UN750plus750749UF106010601,060IF30plus3032IN30plus3032IF303032UF1060plus10601,060IN303032IF160160161IN450plus450449IN450450449IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF750plus750749IF110plus110108IN55plus5553IF450plus450449IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IN110110108IN757574IF757574IN750750749IF750750749IF450450449IN750plus750749IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256IN450m450449IN450mplus450449IF450m450449IF450mplus450449IN750m750749IN750mplus750749IF750m750749IF750mplus750749UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UN450m450449UN450mplus450449UF450m450449UF450mplus450449UN750m750749UN750mplus750749UF750m750749UF750mplus750749UF1060m10601,060UF1060mplus10601,060Technical detailsPipe, outside60.3 mmPipe, inside57 mmScope of delivery1 angled slip-on pipe extensionIndividual requirements & procurement serviceFor the straight version, for further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €108.36
Memmert levelling feet B29768, set of 4, for sizes 30, 55, 75, 110, 160 and 260
Manufacturer number: B29768

The B29768 set of levelling feet contains 4 pieces. With levelling feet, the unit can be aligned horizontally.The set is intended for Memmert units in the U, Um, UF TS, UNpa, I, Im, IPPeco and HPPeco series in sizes 30, 55, 75, 110, 160 and 260. The table of compatible models shows which series is available in which size. The size corresponds to the number in the unit name, for example UF30 or UN30.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorEmbedding and heating larger quantities of paraffin or wax, for example in the UN110pa paraffin ovenParallel stability studies of several active substance batches according to ICH Q1A, for example in the HPP260ecoSuitable forModelSizeInterior volume (l)UF303032IF110110108UN260plus260256UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN260260256UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574UN160pa160161IF30plus3032IN30plus3032IF303032IN303032IF160160161IN160160161IF260plus260256IN260plus260256IF260260256IF55plus5553IN260260256IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574IF160plus160161IN160plus160161UN55pa5553UF110plus110108UN110110108UN110plus110108UF160160161UF160plus160161UN160160161UN160plus160161UF260260256UF260plus260256IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032IPP260eco260256IPP260ecoPlus260256HPP110eco110108HPP260eco260256IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108IN160m160161IN160mplus160161IF160m160161IF160mplus160161IN260m260256IN260mplus260256IF260m260256IF260mplus260256UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108UN160m160161UN160mplus160161UF160m160161UF160mplus160161UN260m260256UN260mplus260256UF260m260256UF260mplus260256UF160TS160161UF260TS260256Scope of delivery1 set of levelling feet (4 pieces)Individual requirements & procurement serviceFor base frames, further accessories and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €46.44
Memmert stacking kit B29744 for sizes 30, 50, 55, 75, 105 and 110
Manufacturer number: B29744

The B29744 stacking kit consists of 4 pieces and is intended for stacking units of the same size. It is intended for Memmert units in the U, Um, UNpa, I, Im, IPPeco, HPPeco, HCP and IFbw series in sizes 30, 50, 55, 75, 105 and 110. The size corresponds to the number in the unit name, for example UF30 or UN30.Separate stacking kits are also available for HCP150, HCP240 and for ICO50, 180 and 240 (B42114, B48129, B68362 and B64732). The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying small sample series in laboratory operation, for example in the UF30Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorIncubating several sample series at the same time in research and medicine, for example in the IF110Environmental tests and environmental simulations in the HCP105 humidity chamberSuitable forModelSizeInterior volume (l)IF110bw110108UF303032IF110110108UN303032UF30plus3032UN30plus3032UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574IN110plus110108UN757574UF110110108UN110pa110108UN75pa7574IF30plus3032IN30plus3032IF303032IN303032IF55plus5553IF110plus110108UN30pa3032IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553UF110plus110108UN110110108UN110plus110108IPP555553IN110110108IN757574IF757574IPP55plus5553IPP110eco110108IPP303032IPP110ecoplus110108IPP30plus3032HPP110eco110108HCP505056HCP105105107IN30m3032IN30mplus3032IF30m3032IF30mplus3032IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574IN110m110108IN110mplus110108IF110m110108IF110mplus110108UN30m3032UN30mplus3032UF30m3032UF30mplus3032UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574UN110m110108UN110mplus110108UF110m110108UF110mplus110108Scope of delivery1 stacking kit (4 pieces)Individual requirements & procurement serviceFor the stacking kits for HCP humidity chambers and ICO CO₂ incubators, for base frames and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €61.92
memmert einschiebe abtropfschale
Memmert stainless steel slide-in drip tray B02072 for sizes 55 and 75
Manufacturer number: B02072

The stainless steel slide-in drip tray B02072 is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It has a 15 mm rim and collects dripping liquid. Memmert states a maximum load of 1.5 kg per slide-in drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.According to Memmert, it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The base drip tray for the same unit size is also available (B04358). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel slide-in drip tray, 15 mm rimIndividual requirements & procurement serviceFor the base drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €74.82
memmert untergestell nivellierbar
Memmert levelling base frame B29747, height 600 mm, for sizes 55 and 75
Manufacturer number: B29747

B29747 is a levelling base frame with a height of 600 mm for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.A flat base frame with a height of 130 mm is also available (B33659). The mobile version with a height of 660 mm is also available (B29748). The table of compatible models shows which series is available in which size. The image is for illustration only.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight600 mmScope of delivery1 levelling base frame, height 600 mmIndividual requirements & procurement serviceFor the flat and the mobile version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €300.14
Memmert levelling base frame B33659, height 130 mm, for sizes 55 and 75
Manufacturer number: B33659

The levelling base frame B33659, with a height of 130 mm, is the flat version for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The size corresponds to the number in the unit name, for example UF55 or UN55.The base frame B29747 with a height of 600 mm is also available for these sizes. The table of compatible models shows which series is available in which size.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Vibration-free drying of dust- or air-sensitive samples and powders, for example in the UN55Incubating several sample series in parallel in research and medicine, for example in the IF75Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenValidatable cooled incubation with documented, redundant temperature monitoring, for example in the IPP55plusSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight130 mmScope of delivery1 levelling base frame, height 130 mmIndividual requirements & procurement serviceFor the taller version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €233.06
memmert untergestell fahrbar
Memmert mobile base frame B29748, height 660 mm, for sizes 55 and 75
Manufacturer number: B29748

The mobile base frame B29748 is 660 mm high.It is intended for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. The levelling version with a height of 600 mm is also available (B29747), as is a flat base frame with a height of 130 mm (B33659). The table of compatible models shows which series is available in which size. The image is for illustration only. The size corresponds to the number in the unit name, for example UF55 or UN55.Typical applicationsUnits of sizes 55 and 75 are placed on the base frame. Typical uses of these units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorCooled incubation of microbiological samples and cultures at constant temperatures below room temperature, for example in the IPP55Paraffin embedding of tissue samples for histological examination in the UN75pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsHeight660 mmScope of delivery1 mobile base frame, height 660 mmIndividual requirements & procurement serviceFor the flat and the levelling version, for base frames for other unit sizes, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €444.62
Stainless steel perforated shelf, illustration
Memmert stainless steel perforated tray B68507 for sizes 55 and 75
Manufacturer number: B68507

B68507 is a stainless steel perforated tray for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It is a shelf and therefore one shelf level in the interior. The size corresponds to the number in the unit name, for example UF55 or UN55. The image is for illustration only.Memmert specifies 20 kg as the maximum load per shelf. The total load of the unit is also limited; the values are given in the unit’s data sheet. The table of compatible models shows which series is available in which size.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Incubating several parallel series of culture media in routine microbiology, for example in the IN55 incubatorTempering, ageing and baking of material samples in several batches, for example in the UF75Suitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelLoad per shelf according to Memmert20 kgScope of delivery1 stainless steel perforated trayIndividual requirements & procurement serviceFor grids, further perforated trays and drip trays, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €120.40
Memmert Wandkonsole
Memmert wall bracket B29757 for size 75
Manufacturer number: B29757

The wall bracket B29757 is intended for wall mounting of Memmert units in the I, Im, U, UNpa and Um series in size 75. The table of compatible models shows which series is available in this size. The image is a Memmert drawing and is for illustration only. The size corresponds to the number in the unit name, for example IF75 or IN75.Typical applicationsExamples in the compatible units:Parallel drying of several sample batches in a confined space, for example in the UN75Incubating several sample series in parallel in research and medicine, for example in the IF75Material testing in the industrial manufacture of smaller components, for example in the UF75Suitable forModelSizeInterior volume (l)IF757574IN757574IF75plus7574IN75plus7574IF75m7574IN75m7574IF75mplus7574IN75mplus7574UF757574UN757574UF75plus7574UN75plus7574UN75pa7574UF75m7574UN75m7574UF75mplus7574UN75mplus7574Scope of delivery1 wall bracket for wall mountingIndividual requirements & procurement serviceFor questions about wall mounting and about compatibility with units not listed in the table, our procurement service accepts enquiries.

Manufacturer's RRP: €268.32
memmert boden abtropfschale
Memmert stainless steel base drip tray B04358 for sizes 55 and 75
Manufacturer number: B04358

B04358 is a stainless steel base drip tray with a 15 mm rim for Memmert units in the U, Um, UNpa, I, Im and IPPeco series in sizes 55 and 75. It collects dripping liquid. According to Memmert, the maximum load is 1.5 kg per base drip tray. The size corresponds to the number in the unit name, for example UF55 or UN55.Memmert points out that it can impair the spatial temperature distribution. The table of compatible models shows which series is available in which size. The slide-in drip tray for the same unit size is also available (B02072). The image is for illustration only.Typical applicationsTypical uses in the compatible units:Drying laboratory glassware and smaller sample series in routine operation, for example in the UF55Embedding and heating paraffin or wax for histology, for example in the UN55pa paraffin ovenSuitable forModelSizeInterior volume (l)UF555553UF55plus5553UN555553UN55plus5553UF757574UF75plus7574UN75plus7574UN757574UN75pa7574IF55plus5553IN55plus5553IF555553IN555553IN75plus7574IF75plus7574UN55pa5553IPP555553IN757574IF757574IPP55plus5553IN55m5553IN55mplus5553IF55m5553IF55mplus5553IN75m7574IN75mplus7574IF75m7574IF75mplus7574UN55m5553UN55mplus5553UF55m5553UF55mplus5553UN75m7574UN75mplus7574UF75m7574UF75mplus7574Technical detailsMaterialStainless steelRim15 mmMaximum load according to Memmert1.5 kgScope of delivery1 stainless steel base drip tray, 15 mm rimIndividual requirements & procurement serviceFor the slide-in drip tray, for grids and perforated trays of the same size, and for questions about compatibility with older Memmert units, our procurement service accepts enquiries.

Manufacturer's RRP: €115.24