Memmert universal oven UF75plus, compact heating and drying oven with forced convection and TwinDISPLAY, 74 litres, up to 300 °C
€2,425.00
Available, delivery time: 2-3 weeks
- Compact heating and drying oven with forced air circulation and TwinDISPLAY
- 74-litre internal capacity, up to 6 shelves
- 2x redundant Pt100 sensors with automatic failover in the event of a fault
- HeatBALANCE and AutoSAFETY for unattended operation
- Temperature range 20 to 300 °C, accuracy to 0.1 °C
- ControlCOCKPIT TwinDISPLAY with 2 TFT colour graphic displays
- Factory calibration certificate at 160 °C included
Product information "Memmert universal oven UF75plus, compact heating and drying oven with forced convection and TwinDISPLAY, 74 litres, up to 300 °C"
For those who wish to benefit from the process reliability of TwinDISPLAY without immediately investing in a larger model, the Memmert universal oven UF75plus offers a compact solution: 74 litres’ internal volume, a temperature range of 20 to 300 °C and two redundant Pt100 sensors that monitor each other. If one sensor fails, the second automatically takes over. With up to 6 shelves and a maximum total load capacity of 120 kg, the UF75plus remains compact enough for the laboratory bench.
Forced air circulation with redundant temperature measurement in a compact design
The UF75plus’s air turbine, which can be electronically controlled in 10 % increments, actively distributes heat throughout the chamber and operates within a temperature range of at least 10 °C above room temperature up to 300 °C. Two DIN Class A Pt100 sensors in a 4-wire configuration monitor each other and ensure a setting accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards, even if one of the two sensors fails. Preheated fresh air is introduced via an electronically adjustable exhaust air damper; the exhaust air outlet with throttle valve can also be controlled electronically.
ControlCOCKPIT TwinDISPLAY: HeatBALANCE and AutoSAFETY
The UF75plus is controlled via the ControlCOCKPIT TwinDISPLAY, which features two high-resolution TFT colour graphic displays. The HeatBALANCE function allows for fine-tuning of the heat output distribution between the upper and lower heating groups from -50 to +50 %. AutoSAFETY also monitors over- and under-temperature conditions, automatically tracks the setpoint within a freely selectable tolerance range and triggers visual and audible alarms in the event of a deviation; if the setpoint is exceeded, the heating system switches off. Programmes are programmed, managed and transferred via an Ethernet interface or USB port using the AtmoCONTROL software. A programmable door lock and a door-open detection feature can be added as options, functions that are exclusive to TwinDISPLAY units.
Capacity and dimensions of the Memmert universal oven UF75plus
The interior measures 400 x 560 x 330 mm; the external dimensions of the housing are 585 x 944 x 514 mm, and the net weight is approximately 66 kg, identical to that of the base model UF75. Two electropolished stainless steel grid shelves are included as standard; up to six shelves are possible in total. The maximum total load is 120 kg, with a maximum of 20 kg per shelf. The interior consists of easy-to-clean stainless steel, reinforced by deep-drawn ribbing, with protected, integrated 4-sided all-round heating; the housing is made of textured stainless steel with a fully galvanised sheet steel rear panel. The UF75plus can be connected either to 230 V (approx. 2,500 W) or 115 V (approx. 1,800 W), in each case at 50/60 Hz.
Selection guide: choosing the right size from the UF range
The Memmert UF range with forced air circulation comprises eight models with internal volumes ranging from 53 to 1,060 litres, each of which is also available with TwinDISPLAY. When selecting the right size, the key factors to consider, alongside the volume, are the footprint and the number of shelves required.
| Model | Internal volume |
| UF55 | 53 l, footprint 585 x 514 mm, max. 4 shelves |
| UF75 | 74 l, footprint 585 x 514 mm, max. 6 shelves |
| UF110 | 108 l, footprint 745 x 584 mm, max. 5 shelves |
| UF160 | 161 l, footprint 745 x 584 mm, max. 8 shelves |
| UF260 | 256 l, footprint 824 x 684 mm, max. 9 shelves |
| UF450 | 449 l, footprint 1,224 x 784 mm, max. 8 shelves |
| UF750 | 749 l, footprint 1,224 x 784 mm, max. 14 shelves |
| UF1060 | 1,060 l, footprint 1,224 x 1,035 mm, max. 14 shelves |
The UF75plus is the obvious choice when the Memmert universal oven UF55plus (53 litres) reaches its capacity limit, but you still wish to use TwinDISPLAY. If you require more capacity, you will find it in the Memmert universal oven UF110plus (108 litres). You can find all sizes in this range in our Climate Chambers & Incubators range.
Distinction: TwinDISPLAY versus SingleDISPLAY, and natural convection
Those who can do without sensor redundancy can save money by opting for the identically built Memmert universal oven UF75 in the basic model with SingleDISPLAY. For samples sensitive to dust or air movement that cannot tolerate active air circulation, the Memmert universal oven UN75plus offers the same housing with natural convection instead of an air turbine, and still features TwinDISPLAY. Those requiring less internal volume will find the Memmert universal oven UF55plus, the more compact TwinDISPLAY model with the same footprint.
Safety according to DIN 12880, enhanced by AutoSAFETY
In addition to the adjustable electronic temperature monitoring and AutoSAFETY, the UF75plus is fitted with a mechanical temperature limiter of protection class 1 according to DIN 12880, which switches off the heating when the temperature reaches approximately 20 °C above the maximum cabinet temperature. The display also allows you to select either an adjustable temperature monitor (protection class 3.1) or an adjustable temperature limiter (protection class 2). An integrated self-diagnostic system assists with fault-finding, and three freely selectable temperature values can be calibrated. The unit bears CE and EAC markings as well as a UL mark.
Installation, operation and disposal
For operation, a minimum distance of 15 cm from the wall and a minimum distance of 20 cm from the ceiling must be maintained; a minimum of 5 cm is sufficient on either side in relation to the wall or an adjacent unit. The unit may be installed at altitudes of up to 2,000 m above sea level at an ambient temperature of 5 °C to 40 °C and a relative humidity of no more than 80 %, non-condensing. Electrically, the UF75plus is designed for overvoltage category II and pollution degree 2; it must only be transported in an upright position. The interior, made of easy-to-clean stainless steel, can be cleaned using standard laboratory cleaning agents. As an electrical appliance, the UF75plus is subject to the German Electrical and Electronic Equipment Act (ElektroG) at the end of its service life and must not be disposed of with household waste; see Regulatory information below.
Typical applications
With an internal volume of 74 litres and redundant sensor technology, the Memmert universal oven UF75plus is suitable for compact laboratory workstations with heightened requirements for process reliability.
- Unattended overnight drying of small to medium-sized batches
- Tempering, ageing and baking of material samples subject to documentation requirements
- Testing and curing in quality assurance
- Time-critical sample preparation requiring high reliability
- A first step into TwinDISPLAY technology without taking up much space
Investment rationale: when TwinDISPLAY is worthwhile
The scope of delivery for the UF75plus includes 2 electropolished stainless steel grid shelves; the oven is designed to accommodate up to 6 shelves. TwinDISPLAY is particularly useful where processes run unattended overnight and a sensor failure would jeopardise the batch. Those who do not require this redundancy can save money by opting for the Memmert universal oven UF75 in its basic model, which is of identical construction. A fully transparent glass door is available as an option for visual inspection without opening the door, as is a programmable door lock with door-open detection. A USB-to-Ethernet adapter and AtmoCONTROL software licences are available for continuous logging. For pharmaceutical or standards-based applications, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request.
Frequently asked questions before making a purchase
What exactly are the benefits of the second Pt100 sensor?
If one sensor fails, the second one automatically takes over its function, offering an improvement in safety compared with the single-sensor system of the SingleDISPLAY base model.
How many samples can the UF75plus hold at one time?
Two grid shelves are included as standard; up to six shelves are possible, each with a maximum load of 20 kg, for a total load of up to 120 kg.
Is TwinDISPLAY worth it for this size?
For simple drying tasks during the day, SingleDISPLAY is usually sufficient. For unattended overnight runs, the UF75plus is the safer choice compared to the Memmert universal oven UF75.
What is the accuracy of the temperature control?
The two redundant Pt100 sensors of DIN class A in 4-wire measurement achieve an accuracy of 0.1 °C up to 99.9 °C and 0.5 °C from 100 °C onwards.
Can I place the UF75plus on a laboratory bench?
Yes, with a net weight of around 66 kg and a footprint of 585 x 514 mm, the UF75plus is designed for use on a laboratory bench, provided that the bench can safely support the load.
Is a natural convection version available with TwinDISPLAY?
Yes, the Memmert universal oven UN75plus shares the same housing as the UF75plus, but operates without an air turbine.
Is a programmable door lock available?
Yes, a programmable door lock and door-open detection are options available exclusively on TwinDISPLAY devices such as the UF75plus.
How does the UF75plus differ from the smaller UF55plus?
Both feature TwinDISPLAY and two redundant Pt100 sensors; the UF75plus offers greater capacity, 74 litres instead of 53, and 6 shelves instead of 4, whilst occupying the same floor space.
Technical details
| Adjustable temperature range | 20 to 300 °C |
| Working temperature range | at least 10 °C above room temperature up to 300 °C |
| Temperature setting accuracy | up to 99.9 °C: 0.1 °C, from 100 °C: 0.5 °C |
| Temperature sensor | 2x Pt100, DIN Class A, 4-wire measurement, redundant |
| Internal volume | 74 l |
| Internal dimensions (W x H x D) | 400 x 560 x 330 mm |
| External dimensions of the housing (W x H x D) | 585 x 944 x 514 mm |
| Net weight | approx. 66 kg |
| 230 V connection | 50/60 Hz, approx. 2,500 W |
| 115 V connection | 50/60 Hz, approx. 1,800 W |
| Shelves max. | 6 |
| Shelves included in the scope of delivery | 2 |
| Max. load on the unit | 120 kg |
| Max. load per shelf | 20 kg |
| Interior materials | Stainless steel, 4-sided all-round heating |
| Housing material | Textured stainless steel, galvanised sheet steel rear panel |
| Control | ControlCOCKPIT TwinDISPLAY, PID microprocessor controller, 2x TFT colour graphic displays |
| Additional functions | HeatBALANCE, AutoSAFETY, visual and audible alarm |
| Permissible ambient temperature | 5 °C to 40 °C |
| Permissible humidity | max. 80 % relative humidity, non-condensing |
| Max. installation altitude | 2,000 m |
| Labelling | CE, EAC, UL marks |
Scope of delivery
- 1x Memmert universal oven UF75plus
- Factory calibration certificate (calibration at 160 °C)
- Fully insulated stainless steel doors with a 2-point locking system (compression door lock)
- 2x stainless steel grid shelf, electropolished
Regulatory information
The Memmert universal oven UF75plus is registered with the Stiftung Elektro-Altgeräte Register (Stiftung EAR) under WEEE registration number DE 66812464.
Individual requirements and procurement service
Optional extras available for the UF75plus include full-view glass doors, interior lighting and a power socket, a reversible door hinge, a potential-free alarm contact and a USB user ID stick for TwinDISPLAY user rights. For data acquisition, a USB-to-Ethernet adapter and AtmoCONTROL software licences, including the AtmoCONTROL FDA version for 21 CFR Part 11, are available. In addition, we arrange calibration, IQ/OQ/PQ and maintenance services, including DAkkS calibration on request. Do you require any of these accessories or assistance in selecting the right universal oven for your application? Through our procurement service, we are happy to assist you with procurement and configuration.
| Volume: | 74 l |
|---|