Bandelin SONOREX D 1058 G hinged lid for built-in ultrasonic baths of the ZE series

46.0-litre capacity on a 600 x 400 mm tank surface: where the 29-litre tanks of the ZE series prove too small, the Bandelin SONOREX ZE 1058 is the next-size-up built-in ultrasonic bath. Under-bench installation, a rotary knob control and a separate generator are in line with the design of the smaller models; the generator used here is the GT 1003 M-C.Space requirements and tankThe internal dimensions of the TE 1058.2 tank are 600 x 400 mm with a depth of 200/220+ mm. The base is sloped, the corners are rounded, and the drain is situated in a 1½-inch groove. The 1.4404 stainless steel has a thickness of 2.0 mm. Of the 46.0-litre capacity, 32.0 l is the working capacity; a fill level mark is provided. Externally, the vibrating tank measures 660 x 460 x 270/290 mm; the degree of protection is IP 30. The net weight is 23.3 kg; the gross weight is 47.4 kg in a carton measuring 1,200 x 800 x 740 mm.2,400 watts from 16 vibration systemsSixteen vibration systems are mounted on the base of the tank. They are powered by the GT 1003 M-C ultrasonic generator, which delivers 600 watts of rated power and 2,400 watts of peak power at 35 kHz. The generator housing, made of painted aluminium, measures 360 x 310 x 142 mm and has an IP 20 protection rating. It is mounted vertically using the mounting bracket. A 2-metre-long connection cable with an AMP-CPC plug leads to the tank. The mains connection is 230 V~ (± 10 %), and the current consumption is 2.7 A.Settings for the ST 15.1The rotary knob is used to set times from 1 to 15 minutes (± 5 %); continuous operation is also available. The generator features a pulse function and a sweep function. The version with push-button control, temperature display and DEGAS is the SONOREX ZE 1058 DT, which features the same tank and generator as this model.ZE 1058 or ZE 1059Both models have a capacity of 46.0 l and a peak power output of 2,400 watts. The SONOREX ZE 1059 is slightly wider, with an external width of 504 mm; it has eleven vibration systems on the base and five on the side, and operates using TwinSonic technology. The ZE 1058 has only bottom vibrators and is supplied in a carton measuring 1,200 x 800 x 740 mm, whilst the ZE 1059 is supplied on a pallet of the same dimensions.Accessories for the 600 x 400 mm tankThe K 29 EM is listed as the insert basket. There are dedicated basket supports for this tank size: the KT 57 and the KT 57 Z with handles. The tank can be covered with the D 57 lid or the D 1058 G hinged lid. The SM 29 silicone studded mat is supplied in a set of two, and the G 1 ½ Type V drain fitting is suitable for the groove in the base. The FT 37 film test frame is included in the kit; a built-in rinsing tank can be ordered as the SONOREX SW 58 Z. The permitted ambient temperature is 5 to 40 °C.Typical applicationsCleaning of medical instrumentsCleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionFrequently asked questionsWhat is the working capacity of the bath?32.0 l out of a total capacity of 46.0 l.Is the bath available with a temperature display?Yes, as the ZE 1058 DT with the ST 30.1 DT control unit.What is the current consumption?2.7 A at 230 V.Technical detailsCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of tank (L x W x D)600 x 400 x 200/220+ mm, sloping base, rounded cornersVibrating tankTE 1058.2, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of vibrating tank (L x W x H)660 x 460 x 270/290 mmDrain1½-inch grooveFill level markYesUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, rated power 600 W, 16 vibration systems at the baseUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V), 5.3 A (115 V)Degree of protection of vibrating tankIP 30Permitted ambient temperature5 to 40 °CNet / gross weight23.3 kg / 47.4 kgPackagingCarton 1,200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryVibrating tank TE 1058.2Ultrasonic generator GT 1003 M-CControl unit ST 15.1Film test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting are not included in the Scope of delivery.Individual requirements and procurement serviceFor accessories, the built-in rinsing basin or another model from the SONOREX ZE range, there is an individual procurement need. You can request a quote via our procurement service.

Eleven vibration systems at the bottom, five on the sides: the Bandelin SONOREX ZE 1059 distributes its 2,400-watt peak power across the bottom and sides of the tank. It is a built-in ultrasonic bath with a capacity of 46.0 l for under-counter installation; it is operated via the ST 15.1 control unit with a rotary knob.TwinSonic in the large tankBandelin calls the combination of bottom and side sound ‘TwinSonic’. According to the manufacturer, it distributes the sound throughout the bath and reduces sound shadows without the basket having to oscillate. The 16 vibration systems in the TE 1059 tank are powered by the GT 1003 M-C ultrasonic generator with a nominal power of 600 watts at 35 kHz. The ZE 1059 also features a pulse function and ‘SweepTec’ automatic frequency control.Dimensions, material and weightInternally, the tank measures 600 x 400 mm and is 200/220+ mm deep; externally, it measures 660 x 504 x 270/290 mm. At 504 mm wide, it is wider on the outside than the ZE 1058, which measures 460 mm. Base and corners: sloped and rounded. The 1.4404 stainless steel is 2.0 mm thick, and the drain bead measures 1½ inches. Of the 46.0-litre capacity, 32.0 l is the usable volume; the fill level mark indicates the fill height. The net weight is 23.9 kg; the gross weight is 48.0 kg on a pallet measuring 1200 x 800 x 740 mm.Operation via the ST 15.1The rotary knob selects a time of 1 to 15 minutes (± 5 %) or continuous operation. If you require a temperature display, time settings up to 30 minutes and DEGAS, these features are available in the SONOREX ZE 1059 DT with the ST 30.1 DT control unit, which features the same tank and generator as this model.ZE 1059 versus ZE 1058The SONOREX ZE 1058 has 16 bottom vibration systems and no side ultrasound, whilst offering the same capacity and peak power. The ZE 1059 is the version for anyone who wants TwinSonic and has space for an external width of 504 mm.Installation, basket and accessoriesThe generator has its own housing (360 x 310 x 142 mm, IP 20) with mounting brackets for vertical installation and is connected to the tank via a 2-metre-long cable with an AMP-CPC plug. For the tank, the basket supports KT 57 and KT 57 Z with handles are listed, along with the insert basket K 29 EM, the lid D 57 and the hinged lid D 1058 G. The FT 37 film test frame is included in the kit. The permissible ambient temperature ranges from 5 to 40 °C; the current consumption is 2.7 A at 230 V~ (± 10 %).Typical applicationsCleaning of medical instrumentsIntensive yet gentle cleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionUltrasonic cleaning with bottom and side ultrasonic waves in a 46-litre tankFrequently asked questionsHow many vibration systems does the tank have?Sixteen, eleven at the base and five on the sides.How is the unit delivered?On a pallet measuring 1200 x 800 x 740 mm; the gross weight is 48.0 kg.Does the ZE 1059 have a temperature display?No, the temperature display is a feature of the ST 30.1 DT, the ZE 1059 DT variant.Technical detailsCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of the tank (L x W x D)600 x 400 x 200/220+ mm, sloping base, rounded cornersOscillating tankTE 1059, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)660 x 504 x 270/290 mmDrain1½-inch drain beadLevel markingsYesUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 WVibration systems11 at the base, 5 on the sideUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 15.1, rotary knobTimer1 to 15 min (± 5 %), continuous operationFunctionsPulse function, sweepOperating voltage230 V AC (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V)Protection rating of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight23.9 kg / 48.0 kgPackagingPallet 1200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryOscillating tank TE 1059GT 1003 M-C ultrasonic generatorControl unit ST 15.1Film test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceIndividual procurement is required for the SW 58 Z built-in rinsing basin, the SM 29 silicone studded mat, the G 1½ Type V drain fitting or other accessories. You can request a quote for this via our procurement service, as well as for other models in the SONOREX ZE range.

The Bandelin SONOREX ZE 1058 DT is a 46-litre built-in ultrasonic bath with a temperature sensor: the ST 30.1 DT control unit displays the temperature and issues a warning in the event of overtemperature. The bath is designed for under-counter installation and has a peak power output of 2,400 watts.Temperature, time and degassingThe ST 30.1 DT is operated via push-buttons. The time can be set to one of eight levels (1, 2, 3, 4, 5, 10, 15 and 30 minutes, ± 5 %); there is also a continuous operation mode. Functions include pulse mode, sweep and the DEGAS rapid degassing function. The temperature sensor feeds the display, and a warning indicates if the temperature is too high. An automatic safety shut-off is activated after 12 hours.TE 1058.2 tank and GT 1003 M-C generator600 x 400 mm internal dimensions, 200/220 mm depth, sloping base and rounded corners: The tank, made of 1.4404 stainless steel (2.0 mm thick), has a capacity of 46.0 l and a working volume of 32.0 l, a fill level mark and a 1½-inch drain bead. There are 16 vibration systems mounted on the base. They are powered by the GT 1003 M-C ultrasonic generator, with a nominal power of 600 watts, a peak power of 2,400 watts and a frequency of 35 kHz. The generator can be mounted separately: aluminium housing with IP 20 rating, mounting bracket for vertical installation, 2 m connection cable.The net weight is 23.3 kg. In its carton measuring 1200 x 800 x 740 mm, the unit has a gross weight of 47.4 kg. The mains connection is 230 V~ (± 10 %) with a current consumption of 2.7 A.A comparison of the sister modelsThe SONOREX ZE 1058 has the same tank and the same generator, but is operated via the ST 15.1’s rotary handle and has neither a temperature display nor the DEGAS function. The SONOREX ZE 1059 DT has the same control system as the 1058 DT; the tank is 504 mm wide on the outside, and in addition to the 11 bottom vibration systems, there are 5 on the side. The 1058 DT is the model to choose if there is sufficient space for a width of 460 mm and bottom ultrasonic waves are sufficient.Installation and environmentThe tank and generator are installed separately. The oscillating tank has degree of protection IP 30, the generator IP 20, and both ratings must be taken into account when selecting the installation location. The permissible ambient temperature ranges from 5 to 40 °C. The generator is mounted vertically using the mounting bracket; the mains cable is permanently attached to the ST 30.1 DT control unit. The FT 37 film test frame is included in the kit. The G 1 ½ Type V drain fitting and the SONOREX SW 58 Z built-in rinsing tank are listed as accessories.Typical applicationsCleaning of medical instruments with visible bath temperatureGentle cleaning of sensitive micro-instruments using the automatic sweep frequency functionDegassing of freshly prepared solution using DEGAS prior to the cleaning cycleFrequently asked questionsIs a temperature sensor included?Yes, it is part of the ST 30.1 DT control unit.How long does the bath run in continuous operation?Until the automatic safety shut-off is triggered after 12 hours.How are the tank and the generator connected?Via a 2 m long connection cable with an AMP-CPC plug.Which basket support is suitable?For this tank size, the KT 57 and KT 57 Z basket supports with handles are listed.Technical detailsControl unitST 30.1 DT with buttons, temperature sensor, temperature display, over-temperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 mins (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, nominal power 600 W, 16 vibration systems on the baseUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of tank (L x W x D)600 x 400 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1058.2, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)660 x 460 x 270/290 mmDrainBead 1½ inchFill level markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V), 5.3 A (115 V)Protection rating of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight23.3 kg / 47.4 kgPackagingCarton 1200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryOscillating tank TE 1058.2Ultrasonic generator GT 1003 M-CControl unit ST 30.1 DT with temperature sensorFilm test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting are not included in the scope of delivery.Individual requirements and procurement serviceFor the K 29 EM insert basket, the D 57 lid, the D 1058 G hinged lid, the SM 29 silicone studded mat, the G 1 ½ Type V drain fitting or the SW 58 Z built-in rinsing tank, individual procurement is required. You can request a quote for this via our procurement service, as well as for other models in the SONOREX ZE range.

The Bandelin SONOREX ZE 1059 DT is the built-in ultrasonic bath with the most advanced technology in the 46-litre class of the ZE series: TwinSonic with bottom and side ultrasonic waves, plus the ST 30.1 DT control unit with temperature display and DEGAS. It is designed for under-counter installation.What’s inside the ZE 1059 DTTE 1059 tank with a capacity of 46.0 l and a working volume of 32.0 l11 transducers at the base, 5 on the sidesGT 1003 M-C generator with a rated power of 600 watts and a peak power of 2,400 watts at 35 kHzST 30.1 DT control unit with temperature sensor, temperature display, over-temperature warning and push-button controlsPulse function, sweep, DEGAS rapid degassing and safety shut-off after 12 hoursControlsThere are eight time settings to choose from: 1, 2, 3, 4, 5, 10, 15 and 30 minutes (± 5 %). There is also a continuous operation mode. The DEGAS rapid degassing function degasses freshly prepared liquid. The temperature display is part of the control unit; the temperature probe is supplied with the bath. Those who can do without the temperature display and DEGAS function can opt for the SONOREX ZE 1059 with a rotary knob, which features the same bath and generator.Sound distribution and tankAccording to the manufacturer, TwinSonic distributes the sound throughout the bath and reduces sound shadows without the basket having to oscillate. The base of the tank (600 x 400 mm, depth 200/220 mm) is sloped, the corners are rounded, and the drain bead is 1½ inches. The 1.4404 stainless steel is 2.0 mm thick. The external dimensions of the oscillating tank are 660 x 504 x 270/290 mm. A fill level mark is provided.Compared to the ZE 1058 DTThe SONOREX ZE 1058 DT has the same control system, a 46.0-litre capacity and a peak power output of 2,400 watts. The difference lies in the ultrasonic transducers: 16 bottom transducers on the 1058 DT, 11 plus 5 on the ZE 1059 DT. The external width is 460 mm compared with 504 mm, and the net weight is 23.3 kg compared with 23.9 kg. The GT 1003 M-C ultrasonic generator is the same in both units.Installation and accessoriesThe generator is given its own space: the aluminium housing (360 x 310 x 142 mm, IP 20) is mounted vertically using the mounting bracket and connected to the tank via a 2 m long cable with an AMP-CPC plug. The oscillating tank has an IP 30 protection rating; the ambient temperature may be between 5 and 40 °C. The FT 37 foil test frame is included in the kit. Accessories listed include the KT 57 and KT 57 Z basket supports, the K 29 EM insert basket, the D 57 lid and the D 1058 G hinged lid.Typical applicationsCleaning of medical instrumentsGentle cleaning of particularly sensitive micro-instruments using the automatic sweep frequency functionUltrasonic cleaning with bottom and side ultrasonic waves, with visible bath temperatureFrequently asked questionsDo I need an additional temperature sensor?No, the temperature sensor is part of the ST 30.1 DT control unit included in the scope of delivery.How is the bath delivered?On a pallet measuring 1,200 x 800 x 740 mm, gross weight 48.0 kg.What are the connected loads?230 V~ (± 10 %), 50/60 Hz with a current draw of 2.7 A.Technical detailsCapacity / Working capacity46.0 l / 32.0 lInternal dimensions of tank (L x W x D)600 x 400 x 200/220 mm, sloping base, rounded cornersOscillating tankTE 1059, stainless steel 1.4404, thickness 2.0 mmExternal dimensions of oscillating tank (L x W x H)660 x 504 x 270/290 mmUltrasonic frequency35 kHzUltrasonic powerPeak power 2,400 W, rated power 600 WVibration systems11 at the base, 5 on the sideUltrasonic generatorGT 1003 M-C, painted aluminium, 360 x 310 x 142 mm, IP 20, with mounting bracket for vertical installationControl unitST 30.1 DT with push-buttons, temperature sensor, temperature display, overtemperature warningTimer1, 2, 3, 4, 5, 10, 15, 30 min (± 5 %), continuous operationFunctionsPulse function, sweep, DEGAS rapid degassing, automatic safety shut-off after 12 hoursDrainBead 1 ½ inchesFill level markYesOperating voltage230 V~ (± 10 %), 50/60 Hz, mains cable permanently attached to the unitCurrent consumption2.7 A (230 V)Degree of protection of oscillating tankIP 30Permissible ambient temperature5 to 40 °CNet / gross weight23.9 kg / 48.0 kgPackagingPallet 1,200 x 800 x 740 mmMedical device classClass I (Regulation (EU) 2017/745)ConformityLow Voltage Directive 2014/35/EU, EMC Directive 2014/30/EU, RoHS Directive 2011/65/EUScope of deliveryTE 1059 oscillating tankGT 1003 M-C ultrasonic generatorControl unit ST 30.1 DT with temperature sensorFoil test frame FT 372 m connection cable (AMP-CPC plug) for the generatorThe insert basket, basket support, lid, studded mat and drain fitting must be ordered separately.Individual requirements and procurement serviceIndividual procurement requirements apply to the SM 29 silicone studded mat, the G 1½ Type V drain fitting, the SW 58 Z built-in rinsing basin or other accessories. You can request a quote without obligation via our procurement service.